Product Search

    SEARCH NOW FOR ALL YOUR ACCUPRO SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 1-50 of 500.
    ACCUPRO 586335

    ACCUPRO

    586335

    DOUBLE ANGLE COLLET: DA100 COLLET, 1/8" 1.441" OAL (MOQ=1, PKG QTY=1)
    ✓ IN STOCK!
    £17.80 Price with VAT: £21.36 Buy Surplus As Low As £12.68 Price with VAT: £15.22
    £12.68 Price with VAT: £15.22
    ACCUPRO 586329

    ACCUPRO

    586329

    DOUBLE ANGLE COLLET: DA100 COLLET, 3/32" 1.441" OAL (MOQ=1, PKG QTY=1)
    ✓ IN STOCK!
    £17.80 Price with VAT: £21.36 Buy Surplus As Low As £10.68 Price with VAT: £12.81
    £10.68 Price with VAT: £12.81
    ACCUPRO 586315

    ACCUPRO

    586315

    DOUBLE ANGLE COLLET: DA200 COLLET, 3/16" 1.193" OAL (MOQ=1, PKG QTY=1)
    ✓ IN STOCK!
    £16.31 Price with VAT: £19.58 Buy Surplus As Low As £11.35 Price with VAT: £13.62
    £11.35 Price with VAT: £13.62
    ACCUPRO ER25HP 09.52

    ACCUPRO

    ER25HP 09.52

    COLLET, TYPE: ER COLLET, COLLET SERIES: ER25, 3/8" COLLET SIZE, TIR (MM): 0.0050, TIR (DECIMAL INCH): 0.000200, MAXIMUM COLLET CAPACITY (INCH): 3/8
    ✓ IN STOCK!
    £59.07 Price with VAT: £70.89 Buy Surplus As Low As £35.20 Price with VAT: £42.24
    £35.20 Price with VAT: £42.24
    ACCUPRO T2644543

    ACCUPRO

    T2644543

    SPIRAL FLUTE TAP, 7/16-20 THREAD SIZE, 3 FLUTE, MODIFIED BOTTOMING, VANADIUM HIGH SPEED STEEL, BRIGHT FINISH, 3 INCH OAL, 18MM THREAD, RIGHT HAND FLUTE, RIGHT HAND THREAD, H3 THREAD LIMIT (M ...
    ✓ IN STOCK!
    £51.23 Price with VAT: £61.47 Buy Surplus As Low As £32.21 Price with VAT: £38.65
    £32.21 Price with VAT: £38.65
    ACCUPRO AP-RS-232IS-120

    ACCUPRO

    AP-RS-232IS-120

    DISCONTINUED BY MANUFACTURER, BALLAST, 2LAMP, T8 INSTANT START, .9AMP, 120V
    Buy Surplus As Low As £48.94 Price with VAT: £58.73
    £48.94 Price with VAT: £58.73
    ACCUPRO 350-18716-C5

    ACCUPRO

    350-18716-C5

    END MILL, CARBIDE, 3 FLUTE, SINGLE END, 37 DEGREE, 3/16" DIAMETER, 1" LOC, 2-1/2" OAL
    £53.39 Price with VAT: £64.07 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    ACCUPRO 0524982/0524989

    ACCUPRO

    0524982/0524989

    GROOVING TOOL SETS, MATERIAL: SOLID CARBIDE , MATERIAL GRADE: MICROGRAIN , MINIMUM SHANK DIAMETER (INCH): 1/4 , MAXIMUM SHANK DIAMETER (INCH): 5/16 , OVERALL LENGTH (INCH): 2-1/2 , NUMBER OF ...
    £237.31 Price with VAT: £284.77 Buy Surplus As Low As £142.38 Price with VAT: £170.86
    £142.38 Price with VAT: £170.86
    ACCUPRO 0203946-0020

    ACCUPRO

    0203946-0020

    3/4 INCH HOLE DIAM CAT50 TAPER SHANK HYDRAULIC TOOL HOLDER/CHUCK 81MM PROJECTION, 69.9MM NOSE DIAM, 37.8MM CLAMPING DEPTH, 25,000 RPM
    £617.74 Price with VAT: £741.29 Buy Surplus As Low As £370.79 Price with VAT: £444.95
    £370.79 Price with VAT: £444.95
    ACCUPRO 12176603

    ACCUPRO

    12176603

    SQUARE END MILL, 1/8, 3/16, 1/4, 5/16, 3/8 & 1/2 INCH, 4 FLUTE,SET UNCOATED, SOLID CARBIDE, SINGLE END, 1/8, 3/16, 1/4, 5/16, 3/8 AND 1/2 INCH SHANK DIAM
    £132.74 Price with VAT: £159.29 Buy Surplus As Low As £80.09 Price with VAT: £96.11
    £80.09 Price with VAT: £96.11
    ACCUPRO 12176971

    ACCUPRO

    12176971

    SQUARE END MILL, 1/8 INCH, 1/2 INCH LOC, 1/8 INCH SHANK DIAM, 1-1/2 INCH OAL, 4 FLUTE, SOLID CARBIDE,SINGLE END, ALTIN FINISH, SPIRAL FLUTE, 40° HELIX, CENTERCUTTING, RIGHT HAND CUT, LEFT HA ...
    £16.31 Price with VAT: £19.58 Buy Surplus As Low As £10.38 Price with VAT: £12.46
    £10.38 Price with VAT: £12.46
    ACCUPRO 20395

    ACCUPRO

    20395

    7.5MM 150° SOLID CARBIDE JOBBER DRILL TIN FINISH, SPIRAL FLUTE, 95MM OAL, STANDARD POINT
    £86.77 Price with VAT: £104.12 Buy Surplus As Low As £52.65 Price with VAT: £63.18
    £52.65 Price with VAT: £63.18
    ACCUPRO 50425

    ACCUPRO

    50425

    13/32 INCH 150° SOLID CARBIDE JOBBER DRILL ALTIN FINISH, SPIRAL FLUTE, 4-1/2 INCH OAL, STANDARD POINT
    £173.53 Price with VAT: £208.24 Buy Surplus As Low As £104.56 Price with VAT: £125.48
    £104.56 Price with VAT: £125.48
    ACCUPRO 88.601.40.AP

    ACCUPRO

    88.601.40.AP

    STYLE C BT40 M16X2 45° 0.5905 INCH DIAM HIGH TORQUE RETENTION KNOB 1.3779 INCH KNOB TO FLANGE, 1.1024 INCH FLANGE THICKNESS, 0.3937 INCH NECK DIAM, 0.6693 INCH PILOT DIAM, 2.3622 INCH OAL
    £37.08 Price with VAT: £44.50 Buy Surplus As Low As £22.25 Price with VAT: £26.70
    £22.25 Price with VAT: £26.70
    ACCUPRO A203986

    ACCUPRO

    A203986

    20MM HOLE DIAM CAT50 TAPER SHANK HYDRAULIC TOOL HOLDER/CHUCK 81MM PROJECTION, 69.9MM NOSE DIAM, 37.8MM CLAMPING DEPTH, 25,000 RPM
    £617.74 Price with VAT: £741.29 Buy Surplus As Low As £370.79 Price with VAT: £444.95
    £370.79 Price with VAT: £444.95
    ACCUPRO ACB087900

    ACCUPRO

    ACB087900

    DRILL CHUCK THRUST RACE AND BALLS, FOR USE WITH 5/16 BALL BEARING DRILL CHUCKS
    £47.46 Price with VAT: £56.95 Buy Surplus As Low As £28.92 Price with VAT: £34.71
    £28.92 Price with VAT: £34.71
    ACCUPRO ACB190000

    ACCUPRO

    ACB190000

    DRILL CHUCK BALL BEARING SET FOR USE WITH 3/4 BALL BEARING DRILL CHUCKS
    £269.94 Price with VAT: £323.92 Buy Surplus As Low As £162.41 Price with VAT: £194.89
    £162.41 Price with VAT: £194.89
    ACCUPRO 88.510.40.AP

    ACCUPRO

    88.510.40.AP

    STYLE A CAT40 5/8-11 45° 0.74 INCH DIAM HIGH TORQUE RETENTION KNOB 0.64 INCH KNOB TO FLANGE, 0.44 INCH FLANGE THICKNESS, 0.49 INCH NECK DIAM, 1.6243 INCH OAL, THROUGH COOLANT, 0.2362 INCH CO ...
    £32.63 Price with VAT: £39.16 Buy Surplus As Low As £20.02 Price with VAT: £24.03
    £20.02 Price with VAT: £24.03
    ACCUPRO 88.601.50.AP

    ACCUPRO

    88.601.50.AP

    STYLE C BT50 M24X3 45° 0.9055 INCH DIAM HIGH TORQUE RETENTION KNOB 1.7716 INCH KNOB TO FLANGE, 1.3779 INCH FLANGE THICKNESS, 0.6693 INCH NECK DIAM, 0.9843 INCH PILOT DIAM, 3.3464 INCH OAL
    £48.94 Price with VAT: £58.73 Buy Surplus As Low As £29.66 Price with VAT: £35.60
    £29.66 Price with VAT: £35.60
    ACCUPRO 88.604.40.AP

    ACCUPRO

    88.604.40.AP

    STYLE C BT40 M16X2 60° 0.5906 INCH DIAM HIGH TORQUE RETENTION KNOB 1.3779 INCH KNOB TO FLANGE, 1.1024 INCH FLANGE THICKNESS, 0.3937 INCH NECK DIAM, 0.6693 INCH PILOT DIAM, 2.3622 INCH OAL
    £35.60 Price with VAT: £42.72 Buy Surplus As Low As £21.51 Price with VAT: £25.81
    £21.51 Price with VAT: £25.81
    ACCUPRO 88.613.40.AP

    ACCUPRO

    88.613.40.AP

    STYLE C CAT40 5/8-11 45° 0.5906 INCH DIAM HIGH TORQUE RETENTION KNOB 1.2638 INCH KNOB TO FLANGE, 0.9882 INCH FLANGE THICKNESS, 0.3937 INCH NECK DIAM, 2.248 INCH OAL, THROUGH COOLANT, 0.1378 ...
    £45.24 Price with VAT: £54.28 Buy Surplus As Low As £27.44 Price with VAT: £32.93
    £27.44 Price with VAT: £32.93
    ACCUPRO A204056

    ACCUPRO

    A204056

    TAPER SHANK, 20MM HOLE DIAM HSK63A , HYDRAULIC TOOL HOLDER/CHUCK 90MM PROJECTION, 42MM NOSE DIAM, 37.8MM CLAMPING DEPTH, 25,000 RPM
    £528.75 Price with VAT: £634.50 Buy Surplus As Low As £317.40 Price with VAT: £380.88
    £317.40 Price with VAT: £380.88
    ACCUPRO AP-RS-240RS-120

    ACCUPRO

    AP-RS-240RS-120

    BALLAST ELECTRONIC RAPID START 120V .84AMP 60HZ
    Buy Surplus As Low As £28.92 Price with VAT: £34.71
    £28.92 Price with VAT: £34.71
    ACCUPRO PS600DW

    ACCUPRO

    PS600DW

    DISCONTINUED BY MANUFACTURER, EMERGENCY BALLAST, 120/277 VAC DUAL INPUT, 60 HZ, 0.27 AMP, DAMP/WET LOCATION
    Buy Surplus As Low As £73.42 Price with VAT: £88.10
    £73.42 Price with VAT: £88.10
    ACCUPRO 78088127

    ACCUPRO

    78088127

    SINGLE END, SPIRAL FLUTE, RIGHT HAND CUT, RIGHT HAND FLUTE, 3/4X5X3/4INCH
    £437.53 Price with VAT: £525.04 Buy Surplus As Low As £218.77 Price with VAT: £262.52
    £218.77 Price with VAT: £262.52
    ACCUPRO AP-432IP-UNV

    ACCUPRO

    AP-432IP-UNV

    DISCONTINUED BY MANUFACTURER, BALLAST, INSTANT START FLUORESCENT BALLAST, 4 LAMP, T8, 32 W, 120/277 V
    Buy Surplus As Low As £82.39 Price with VAT: £98.87
    £82.39 Price with VAT: £98.87
    ACCUPRO 0203934-0020

    ACCUPRO

    0203934-0020

    1/2 INCH HOLE DIAM CAT40 TAPER SHANK HYDRAULIC TOOL HOLDER/CHUCK 64MM PROJECTION, 44.5MM NOSE DIAM, 30.5MM CLAMPING DEPTH, 25,000 RPM
    £485.00 Price with VAT: £581.99 Buy Surplus As Low As £291.44 Price with VAT: £349.73
    £291.44 Price with VAT: £349.73
    ACCUPRO 0203988-0020

    ACCUPRO

    0203988-0020

    32MM HOLE DIAM CAT50 TAPER SHANK HYDRAULIC TOOL HOLDER/CHUCK 81MM PROJECTION, 69.9MM NOSE DIAM, 47.7MM CLAMPING DEPTH, 25,000 RPM
    £617.74 Price with VAT: £741.29 Buy Surplus As Low As £370.79 Price with VAT: £444.95
    £370.79 Price with VAT: £444.95
    ACCUPRO 0205143-0020

    ACCUPRO

    0205143-0020

    1/2 INCH HOLE DIAM BT40 TAPER SHANK HYDRAULIC TOOL HOLDER/CHUCK 90MM PROJECTION, 32MM NOSE DIAM, 30.5MM CLAMPING DEPTH, 6.118 INCH OAL, 25,000 RPM, THROUGH COOLANT
    £480.55 Price with VAT: £576.65 Buy Surplus As Low As £288.48 Price with VAT: £346.17
    £288.48 Price with VAT: £346.17
    ACCUPRO 0525016/0525023

    ACCUPRO

    0525016/0525023

    GROOVING TOOL SETS, MATERIAL: SOLID CARBIDE , MATERIAL GRADE: MICROGRAIN , MINIMUM SHANK DIAMETER (INCH): 3/8 , MAXIMUM SHANK DIAMETER (INCH): 3/8 , OVERALL LENGTH (INCH): 2-1/2 , SHANK DIAM ...
    £352.99 Price with VAT: £423.59 Buy Surplus As Low As £212.09 Price with VAT: £254.51
    £212.09 Price with VAT: £254.51
    ACCUPRO 12176607

    ACCUPRO

    12176607

    SQUARE END MILL, 1/8, 3/16, 1/4, 5/16, 3/8 & 1/2 INCH, 4 FLUTE,SET UNCOATED, SOLID CARBIDE, DOUBLE END, 1/8, 3/16, 1/4, 5/16, 3/8, 1/2 INCH SHANK DIAM, CENTERCUTTING
    £180.95 Price with VAT: £217.14 Buy Surplus As Low As £109.01 Price with VAT: £130.82
    £109.01 Price with VAT: £130.82
    ACCUPRO 12184011

    ACCUPRO

    12184011

    BALL END MILL, 27/64 INCH DIAM, 1 INCH LOC, 2 FLUTE SOLID CARBIDE, TICN FINISH, SINGLE END, 2-3/4 INCH OAL, 7/16 INCH SHANK DIAM, SPIRAL FLUTE
    £50.15 Price with VAT: £60.17 Buy Surplus As Low As £29.21 Price with VAT: £35.05
    £29.21 Price with VAT: £35.05
    ACCUPRO 20445

    ACCUPRO

    20445

    1/2 INCH 150° SOLID CARBIDE JOBBER DRILL TIN FINISH, SPIRAL FLUTE, 4-3/4 INCH OAL, STANDARD POINT
    £257.33 Price with VAT: £308.80 Buy Surplus As Low As £154.99 Price with VAT: £185.99
    £154.99 Price with VAT: £185.99
    ACCUPRO 50441

    ACCUPRO

    50441

    12MM 150° SOLID CARBIDE JOBBER DRILL ALTIN FINISH, SPIRAL FLUTE, 121MM OAL, STANDARD POINT
    £250.66 Price with VAT: £300.79 Buy Surplus As Low As £150.54 Price with VAT: £180.65
    £150.54 Price with VAT: £180.65
    ACCUPRO 6501407

    ACCUPRO

    6501407

    SQUARE END MILL,1/8'' DIA, 0.187'' LOC, 1/8'' SHANK DIA, 2-1/2'' OAL, 3 FLUTES, SOLID CARBIDE SINGLE END, ALTIN FINISH, SPIRAL FLUTE, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE
    £49.69 Price with VAT: £59.62 Buy Surplus As Low As £30.40 Price with VAT: £36.49
    £30.40 Price with VAT: £36.49
    ACCUPRO 88.603.50.AP

    ACCUPRO

    88.603.50.AP

    STYLE C BT50 M24X3 45° 0.9055 INCH DIAM HIGH TORQUE RETENTION KNOB 1.7716 INCH KNOB TO FLANGE, 1.3779 INCH FLANGE THICKNESS, 0.6693 INCH NECK DIAM, 0.9843 INCH PILOT DIAM, 3.346 INCH OAL, TH ...
    £66.74 Price with VAT: £80.09 Buy Surplus As Low As £40.05 Price with VAT: £48.05
    £40.05 Price with VAT: £48.05
    ACCUPRO 88.613.50.AP

    ACCUPRO

    88.613.50.AP

    STYLE C CAT50 1-8 45° 0.9055 INCH DIAM HIGH TORQUE RETENTION KNOB 1.7776 INCH KNOB TO FLANGE, 1.3839 INCH FLANGE THICKNESS, 0.6693 INCH NECK DIAM, 3.3524 INCH OAL, THROUGH COOLANT, 0.2362 IN ...
    £53.39 Price with VAT: £64.07 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    ACCUPRO A0224390

    ACCUPRO

    A0224390

    3/8 INCH ID X 3/4 INCH OD, 24MM HEAD DIAM, SEALED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD
    £101.60 Price with VAT: £121.92 Buy Surplus As Low As £61.55 Price with VAT: £73.86
    £61.55 Price with VAT: £73.86
    ACCUPRO A217968

    ACCUPRO

    A217968

    5/8 INCH ID X 3/4 INCH OD, 24MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD
    £101.60 Price with VAT: £121.92 Buy Surplus As Low As £61.55 Price with VAT: £73.86
    £61.55 Price with VAT: £73.86
    ACCUPRO ACB130000

    ACCUPRO

    ACB130000

    DRILL CHUCK BALL BEARING SET FOR USE WITH 1/2 BALL BEARING DRILL CHUCKS
    £160.92 Price with VAT: £193.11 Buy Surplus As Low As £97.15 Price with VAT: £116.58
    £97.15 Price with VAT: £116.58
    ACCUPRO ACB197900

    ACCUPRO

    ACB197900

    DRILL CHUCK THRUST RACE AND BALLS, FOR USE WITH 3/4 BALL BEARING DRILL CHUCKS
    £48.20 Price with VAT: £57.84 Buy Surplus As Low As £28.92 Price with VAT: £34.71
    £28.92 Price with VAT: £34.71
    ACCUPRO A217378

    ACCUPRO

    A217378

    1/4 INCH ID X 1/2 INCH OD, 16.5MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 45MM LENGTH UNDER HEAD
    £101.60 Price with VAT: £121.92 Buy Surplus As Low As £61.55 Price with VAT: £73.86
    £61.55 Price with VAT: £73.86
    ACCUPRO A217925

    ACCUPRO

    A217925

    8MM ID X 20MM OD, 24MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD
    £101.60 Price with VAT: £121.92 Buy Surplus As Low As £61.55 Price with VAT: £73.86
    £61.55 Price with VAT: £73.86
    ACCUPRO A0217923

    ACCUPRO

    A0217923

    6MM ID X 20MM OD, 24MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD
    £101.60 Price with VAT: £121.92 Buy Surplus As Low As £61.55 Price with VAT: £73.86
    £61.55 Price with VAT: £73.86
    ACCUPRO A224392

    ACCUPRO

    A224392

    1/2 INCH ID X 3/4 INCH OD, 24MM HEAD DIAM, SEALED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD
    £101.60 Price with VAT: £121.92 Buy Surplus As Low As £61.55 Price with VAT: £73.86
    £61.55 Price with VAT: £73.86
    ACCUPRO A204443

    ACCUPRO

    A204443

    12MM HOLE DIAM BT40 TAPER SHANK HYDRAULIC TOOL HOLDER/CHUCK 90MM PROJECTION, 32MM NOSE DIAM, 30.5MM CLAMPING DEPTH, 6.118 INCH OAL, 25,000 RPM, THROUGH COOLANT
    £530.23 Price with VAT: £636.28 Buy Surplus As Low As £318.14 Price with VAT: £381.77
    £318.14 Price with VAT: £381.77
    ACCUPRO A207923

    ACCUPRO

    A207923

    6MM ID X 20MM OD, 24MM HEAD DIAM, SEALED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD
    £101.60 Price with VAT: £121.92 Buy Surplus As Low As £61.55 Price with VAT: £73.86
    £61.55 Price with VAT: £73.86
    ACCUPRO A207933

    ACCUPRO

    A207933

    16MM ID X 20MM OD, 24MM HEAD DIAM, SEALED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD
    £101.60 Price with VAT: £121.92 Buy Surplus As Low As £61.55 Price with VAT: £73.86
    £61.55 Price with VAT: £73.86
    ACCUPRO A217910

    ACCUPRO

    A217910

    3MM ID X 12MM OD, 16.5MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 45MM LENGTH UNDER HEAD
    £105.30 Price with VAT: £126.37 Buy Surplus As Low As £63.78 Price with VAT: £76.53
    £63.78 Price with VAT: £76.53
    ACCUPRO 88.600.30.AP

    ACCUPRO

    88.600.30.AP

    STYLE C BT30 M12X1.75 45° 0.4331 INCH DIAM HIGH TORQUE RETENTION KNOB 0.9055 INCH KNOB TO FLANGE, 0.7087 INCH FLANGE THICKNESS, 0.2756 INCH NECK DIAM, 0.4921 INCH PILOT DIAM, 1.693 INCH OAL, ...
    £33.37 Price with VAT: £40.05 Buy Surplus As Low As £20.02 Price with VAT: £24.03
    £20.02 Price with VAT: £24.03
    Next
    1 2 3 4 5 6 7 8 9 10