SEARCH NOW FOR ALL YOUR ALECO SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
APEX TOOLS
CLECO
542778-6M
TOOL CABLE EXTENSION 6M
£1,336.64
Price with VAT:
£1,603.97
Repair Yours
Contact Us
APEX TOOLS
CLECO
542778-8M
DISCONTINUED BY MANUFACTURER, ELECTRIC TOOL CABLE, 8M
£1,381.95
Price with VAT:
£1,658.34
Repair Yours
Contact Us
APEX TOOLS
CLECO
TVP-110-15-U-D
DISCONTINUED BY MANUFACTERER, PNEUMATIC QUALIFIER, 110-230 VAC, 50/60HZ, SINGLE PHASE, W/ INTERFACE AND KEYPAD
£2,197.53
Price with VAT:
£2,637.03
Repair Yours
Contact Us
APEX TOOLS
CLECO
MPRO400GC-P
DISCONTINUED BY MANUFACTURER, NUTRUNNER CONTROLLER, 18/48 AIRLB, CONTROLS UP TO 16 TOOL, 50/60 HZ, 2A, 115/230 VAC
✓ IN STOCK!
£2,005.86
Price with VAT:
£2,407.03
Repair Yours
Contact Us
APEX TOOLS
CLECO
35RNL10K-3
DISCONTINUED ITEM, CLECO 3/8" ANGLE NUTRUNNER 10-19 FT LBS. | 710 RPM
£1,812.39
Price with VAT:
£2,174.87
Repair Yours
Contact Us
APEX TOOLS
CLECO
TVP-100-30-D
CLECO, TVP-100-30-D, TVP10030D, TORQUE VERIFIER, 115/230VAC, 50/60HZ, 1AMP, 1PHASE
£1,600.95
Price with VAT:
£1,921.14
Repair Yours
Contact Us
APEX TOOLS
CLECO
TME-111-15-U-DC01
CONTROL, 115VAC, 15A, 50/60HZ, 1PH
£2,332.31
Price with VAT:
£2,798.77
Repair Yours
Contact Us
APEX TOOLS
CLECO
TME-111-15-U
DISCONTINUED BY MANUFACTURER,CONTROLLER AIR FOR ELECTRIC TOOL, 115 VAC, 50/60 HZ, 1 PHASE, 15 AMP, CLECO
✓ IN STOCK!
£2,883.13
Price with VAT:
£3,459.76
Repair Yours
Contact Us
APEX TOOLS
CLECO
24RAS13AM3
DISCONTINUED BY MANUFACTURER, NUTRUNNER / ANGLE, SERIES 24, CLUTCH SHUT OFF, LEVER START, COLLAR REVERSE, 7.0-14.0 TORQUE RANGE, 700 -1/MIN FREE SPEED, 3/8 INCH SQUARE DRIVE
✓ IN STOCK!
£2,343.60
Price with VAT:
£2,812.32
Repair Yours
Contact Us
APEX TOOLS
CLECO
TME-211-30-D-GM03
DISCONTINUED BY MANUFACTURER, SAFETY CONTROLLER, TIGHTENING MANAGER, TM200 SERIES, 1 PHASE, 10 AMP, 230 VAC, 50/60 HZ
£1,823.72
Price with VAT:
£2,188.47
Repair Yours
Contact Us
APEX TOOLS
CLECO
24RAA19AM3
NUTRUNNER / ANGLE, SERIES 24, CLUTCH SHUT OFF, LEVER START, COLLAR REVERSE, 7.0-14.0 TORQUE RANGE, 700 -1/MIN FREE SPEED, 3/8 INCH SQUARE DRIVE OUTPUT, 15 INCH LENGTH, 0.52 INCH SIDE TO CENT ...
✓ IN STOCK!
£1,713.47
Price with VAT:
£2,056.16
Repair Yours
Contact Us
APEX TOOLS
CLECO
75M-2-R8-4
NUTRUNNER INLINE FIXTURED 1/2" SQ DRIVE
£3,012.35
Price with VAT:
£3,614.82
Repair Yours
Contact Us
ALLEN BRADLEY
VEECO
JYKG76-01MC-V3
DISCONTINUED BY MANUFACTURER, SHORT CIRCUIT SYSTEM UNIT, INPUT: 10.5 AMP 1 PHASE 230 VAC 60 HZ, OUTPUT: 10.5 AMP 230 VAC, 200.000 RMS, 200 KA
£5,300.88
Price with VAT:
£6,361.06
Repair Yours
Contact Us
APEX TOOLS
CLECO
41R032M
MOTOR, ROTARY VANE, 1 HP, SE, REV, 320 RPM, 63 FT LBS., 5/8" KEYED SPINDLE
£2,545.66
Price with VAT:
£3,054.79
Repair Yours
Contact Us
APEX TOOLS
CLECO
17EP06Q
NUTRUNNER, 17EP SERIES, PISTOL GRIP, 2600 RPM FREE SPEED, 4.4-1.5 FT LB, 6-2 NM, #10 BOLT SIZE, 7 INCH LENGTH, 0.84 INCH SIDE TO CENTER
✓ IN STOCK!
£2,184.80
Price with VAT:
£2,621.76
Repair Yours
Contact Us
APEX TOOLS
CLECO
17EA28AM3
NUTRUNNER RIGHT ANGLE
£2,665.73
Price with VAT:
£3,198.88
Repair Yours
Contact Us
APEX TOOLS
CLECO
B4R318M
AXIAL PISTON REAR EXHAUST REVERSIBLE PNEUMATIC AIR MOTOR, 0.9 HP POWER RATING, 525 RPM SPEED, 40 FT-LB TORQUE, 39.9 SCFM AIR FLOW
£4,475.89
Price with VAT:
£5,371.07
Repair Yours
Contact Us
APEX TOOLS
CLECO
47EA90AH4
NUTRUNNER RIGHT ANGLE
£2,858.30
Price with VAT:
£3,429.96
Repair Yours
Contact Us
APEX TOOLS
CLECO
MPR0400GC
GLOBAL TRANSDUCER CONTROLLER, HYBRID, 115/230 VAC, 2 AMP, 50/60 HZ
£2,899.83
Price with VAT:
£3,479.80
Repair Yours
Contact Us
APEX TOOLS
CLECO
34RAA68AZ4
PNEUMATIC NUTRUNNER, 34 SERIES, 1/2IN SQUAR DRIVE, 25-50LB TORQUE RANGE, 255RPM, 3/8IN AIR INLET, (473-34RAA68AZ4)
£3,152.06
Price with VAT:
£3,782.47
Repair Yours
Contact Us
APEX TOOLS
CLECO
TME-211-15-U
DISCONTINUED BY MANUFACTURER, TIGHTENING MANAGER CONTROLLER, 2 CHANNEL, 115 VAC, 1 PHASE, 15 AMP, 50/60 HZ, ETHERNET, 16.5 INCH WIDTH, 17.5 INCH HEIGHT, 12.3 INCH DEPTH
✓ IN STOCK!
£2,294.74
Price with VAT:
£2,753.69
Repair Yours
Contact Us
APEX TOOLS
CLECO
67EA1340AH8
TORQUE TOOL
£2,956.47
Price with VAT:
£3,547.76
Repair Yours
Contact Us
APEX TOOLS
CLECO
EMT600-2R6-1"-APM
DISCONTINUED BY MANUFACTURER, DC ELECTRIC ASSEMBLY TOOL
£2,675.36
Price with VAT:
£3,210.43
Repair Yours
Contact Us
APEX TOOLS
CLECO
MPRO400GC-S
TOOL CONTROLLER, FOR ANALOG TOOLS, SECONDARY, 18-48 AIRLB, 115-230 VAC, 50/60 HZ, 2 AMP, 250 VA POWER RATING, IP52
£4,284.65
Price with VAT:
£5,141.58
Repair Yours
Contact Us
APEX TOOLS
CLECO
A8R-2225
AXIAL PISTON MOTOR, 2.7HP
£4,237.70
Price with VAT:
£5,085.23
Repair Yours
Contact Us
APEX TOOLS
CLECO
MPRO400GC-M
DISCONTINUED BY MANUFACTURER, CONTROLLER, MASTER, 18-48 AIRLB,115-230 VAC, 50/60 HZ, 2 AMP, 250 VA POWER RATING, IP52, CONTROLS UP TO 16 TOOLS, CORDLESS, BTS SERIES
£4,236.47
Price with VAT:
£5,083.77
Repair Yours
Contact Us
APEX TOOLS
CLECO
TME-221-30-D
SAFTEY CONTROLLER, 10AMP, 1PH, 230VAC, 50/60HZ
£5,113.27
Price with VAT:
£6,135.92
Repair Yours
Contact Us
APEX TOOLS
CLECO
TMEB-220-30-D
SAFETY CONTROLLER, 30A, 1PH, 230VAC, 50/60HZ
£5,113.27
Price with VAT:
£6,135.92
Repair Yours
Contact Us
APEX TOOLS
CLECO
18ESE17D3
DISCONTINUED BY MANUFACTURER, TRANSDUCER CONTROL, INLINE CORDED, ELECTRIC NUTRUNNER, TORQUE RANGE MIN/MAX FT/LB: 2.95/12.5, 18 SERIES
£4,576.30
Price with VAT:
£5,491.56
Repair Yours
Contact Us
APEX TOOLS
CLECO
EMT600-2R6-1-29P
DISCONTINUED BY MANUFACTURER, SPINDLE MOTOR ASSEMBLY 1IN CHUCK
£4,515.13
Price with VAT:
£5,418.15
Repair Yours
Contact Us
APEX TOOLS
CLECO
A6R335M
AXIAL PISTON POWER MOTOR, 1 1/8 IN KEYED SPINDLE, 1.9HP, 1030RPM, REVERSIBLE
£4,658.61
Price with VAT:
£5,590.33
Repair Yours
Contact Us
APEX TOOLS
CLECO
TME-113-30-5001
CONTROLLER FOR ELECTRIC TOOL
£5,980.90
Price with VAT:
£7,177.08
Repair Yours
Contact Us
APEX TOOLS
CLECO
TME-111-3-U
CONTROLLER AIR FOR ELECTRIC TOOL
£5,980.90
Price with VAT:
£7,177.08
Repair Yours
Contact Us
APEX TOOLS
CLECO
A8R311M-NS
AXIAL PISTON MOTOR, A8R SERIES, 450RPM AT 225HP MAX, STALL TORQUE: 100 FT. LBS. / 149 NM, STARTING TORQUE: 82 FT. LBS. / 111 NM
£6,116.08
Price with VAT:
£7,339.29
Repair Yours
Contact Us
APEX TOOLS
CLECO
48EAE41AM3
ELECTRIC NUTRUNNER, 48 SERIES, RIGHT ANGLE, TRANSDUCER CONTROL, 41NM, 6.6-30.3FT/LB TORQUE, 17.3IN LENGTH, 1090RPM
✓ IN STOCK!
£6,686.98
Price with VAT:
£8,024.38
Repair Yours
Contact Us
APEX TOOLS
CLECO
A8R-2226
REVERSIBLE AXIAL PISTONMOTOR
£7,126.79
Price with VAT:
£8,552.15
Repair Yours
Contact Us
APEX TOOLS
CLECO
MR70R123M
ROTARY VANE MOTOR, MR70 SERIES, 5.59 KW / 7.5 HP, 257 / 465 RPM, 1-1/4 INCH KEYED SPINDLE, 340.0 FT LB / 461 NM STALL TORQUE, 2560 LBS / 1161 KG LOAD AT STALL, 21.8-1 GEAR RATIO, 212 SCFM, 1 ...
£7,961.70
Price with VAT:
£9,554.04
Repair Yours
Contact Us
APEX TOOLS
CLECO
18EAE28AM3
ELECTRIC NUTRUNNER, 18 SERIES, RIGHT ANGLE, CORDED, 3/8 SQUARE DRIVE, 4.43/20.7 FT/LB TORQUE RANGE (MIN/MAX), 700 R/MIN
£10,025.90
Price with VAT:
£12,031.08
Repair Yours
Contact Us
APEX TOOLS
CLECO
18ESE31D3
TRANSDUCER CONTROL / INLINE, SERIES 18, BRUSHLESS OPERATION, MEMORY INTELLIGENCE, 5.2-22.9 TORQUE RANGE, 695 1/MIN FREE SPEED, 12.4 INCH LENGTH, 0.91 INCH SIDE TO CENTER, CORDED ELECTRIC
£11,028.42
Price with VAT:
£13,234.10
Repair Yours
Contact Us
ALECO
130211
60 INCH LONG X 46 INCH WIDE, CHAIR MAT RECTANGULAR, STRAIGHT EDGE STYLE
✓ IN STOCK!
£89.11
Price with VAT:
£106.93
APEX TOOLS
CLECO
542778-3M
DISCONTINUED BY MANUFACTURER, CABLE, 3M, FOR ELECTRONICALLY CONTROLLED CROWFOOT NUTRUNNER
✓ IN STOCK!
£97.98
Price with VAT:
£117.57
APEX TOOLS
CLECO
18ES31D3
DISCONTINUED BY MANUFACTURER, CLECO 18ES31D3 NUTRUNNER, 695 RPM, TORQ 31.8
✓ IN STOCK!
£2,394.20
Price with VAT:
£2,873.04
APEX TOOLS
CLECO
TME-121-15-U
DISCONTINUED BY MANUFACTURER, TIGHTENING MANAGER CONTROLLER, 2-CHANNEL, 15AMP, 115VAC, 50/60HZ, 1PH
✓ IN STOCK!
£472.40
Price with VAT:
£566.88
