SEARCH NOW FOR ALL YOUR ALECO SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
APEX TOOLS
CLECO
TME-111-15-U-EN
DISCONTINUED BY MANUFACTURER, CHANNEL TIGHTENING MANAGER CONTROLLER, 115V, 50/60HZ, 1PH, 15AMP
✓ IN STOCK!
£959.48
Price with VAT:
£1,151.38
APEX TOOLS
CLECO
18EAE15AM3
NUTRUNNER, SERIES 18, RIGHT ANGLE, CORDED ELECTRIC TRANSDUCER CONTROL, TORQUE RANGE 2.95-11.1 FT LBS / 4-15 NM
✓ IN STOCK!
£3,115.85
Price with VAT:
£3,739.02
APEX TOOLS
CLECO
24RAA19AM3
NUTRUNNER / ANGLE, SERIES 24, CLUTCH SHUT OFF, LEVER START, COLLAR REVERSE, 7.0-14.0 TORQUE RANGE, 700 -1/MIN FREE SPEED, 3/8 INCH SQUARE DRIVE OUTPUT, 15 INCH LENGTH, 0.52 INCH SIDE TO CENT ...
✓ IN STOCK!
£1,919.68
Price with VAT:
£2,303.62
APEX TOOLS
CLECO
5RSSTP-10BQ
SCREWDRIVER, 5 SERIES, PISTOL GRIP, SLIDING KNOB REVERSE, 1/4 INCH HEX QUICK CHANGE, #10 SCREW SIZE, 1100 RPM FREE SPEED, 40 IN LB, 4.5 NM, 6.4 INCH LENGTH
✓ IN STOCK!
£592.18
Price with VAT:
£710.61
APEX TOOLS
CLECO
5RSAUPT-10BQ
SCREW DRIVER, PISTOL GRIP, 5 SERIES, PUSH AND TRIGGER START, SLIDING KNOB REVERSE, TOP AIR INLET, #10 SCREW SIZE, 1100 RPM FREE SPEED, 40-3 IN LB, 4.5-.4 NM, 8.4 INCH LENGTH
✓ IN STOCK!
£578.72
Price with VAT:
£694.46
APEX TOOLS
CLECO
5RNAL-254BH-3
NUTRUNNER / ANGLE, CLECOMATIC CLUTCH, 5 SERIES, LEVER START, TWIST RING REVERSE, 1/4 INCH BOLT SIZE, 500 RPM FREE SPEED, 75-10 IN LB, 8.5-1.1 NM, 13.9 INCH LENGTH, 1.2 INCH HEAD HEIGHT, 0.5 ...
✓ IN STOCK!
£1,370.70
Price with VAT:
£1,644.84
APEX TOOLS
CLECO
14E1SA02Q
SCREWDRIVER, 14 SERIES, INLINE, REVERSIBLE, QUICK CHANGE, PUSH-TO-START, #6 SCREW SIZE, 1900 RPM FREE SPEED, 16-3 IN LB, 1.8-0.4 NM, 12.9 INCH LENGTH, 110 V
✓ IN STOCK!
£343.93
Price with VAT:
£412.72
APEX TOOLS
CLECO
TME-121-15-U
DISCONTINUED BY MANUFACTURER, TIGHTENING MANAGER CONTROLLER, 2-CHANNEL, 15AMP, 115VAC, 50/60HZ, 1PH
✓ IN STOCK!
£700.63
Price with VAT:
£840.76
APEX TOOLS
CLECO
WP-2049-6
IMPACT WRENCH, WP SERIES, BIASED, REVERSE POWER, 125-550 FT LB, 170-750 NM, 6000 RPM, 1000 IPM, 3/4 INCH SQUARE DRIVE, 6.4 INCH LENGTH, 1.6 INCH SIDE TO CENTER
✓ IN STOCK!
£1,288.54
Price with VAT:
£1,546.25
APEX TOOLS
CLECO
17EP06Q
NUTRUNNER, 17EP SERIES, PISTOL GRIP, 2600 RPM FREE SPEED, 4.4-1.5 FT LB, 6-2 NM, #10 BOLT SIZE, 7 INCH LENGTH, 0.84 INCH SIDE TO CENTER
✓ IN STOCK!
£3,354.76
Price with VAT:
£4,025.71
APEX TOOLS
CLECO
18ES31D3
DISCONTINUED BY MANUFACTURER, CLECO 18ES31D3 NUTRUNNER, 695 RPM, TORQ 31.8
✓ IN STOCK!
£3,036.09
Price with VAT:
£3,643.30
APEX TOOLS
CLECO
47BAXB15AM3
DISCONTINUED BY MANUFACTURER, EC TOOL, 47 SERIES, CORDLESS, BATTERY POWER, RIGHT-ANGLE, WLAN: 2.4 GHZ, BATTERY: 48 V MAX., 15 NM, ATTACHMENT: SQUARE 3/8", LOCKING: PIN
✓ IN STOCK!
£678.97
Price with VAT:
£814.76
APEX TOOLS
CLECO
24RAS13AM3
DISCONTINUED BY MANUFACTURER, NUTRUNNER / ANGLE, SERIES 24, CLUTCH SHUT OFF, LEVER START, COLLAR REVERSE, 7.0-14.0 TORQUE RANGE, 700 -1/MIN FREE SPEED, 3/8 INCH SQUARE DRIVE
✓ IN STOCK!
£2,343.60
Price with VAT:
£2,812.32
APEX TOOLS
CLECO
47EA60AM4
DISCONTINUED BY MANUFACTURER, NUTRUNNER, 47EA SERIES, CORDED, 485 RPM, 61 NM MAX TORQUE, RIGHT ANGLE, ELECTRIC TRANSDUCER CONTROL
✓ IN STOCK!
£1,985.14
Price with VAT:
£2,382.16
APEX TOOLS
CLECO
48EAE41AM3
ELECTRIC NUTRUNNER, 48 SERIES, RIGHT ANGLE, TRANSDUCER CONTROL, 41NM, 6.6-30.3FT/LB TORQUE, 17.3IN LENGTH, 1090RPM
✓ IN STOCK!
£8,521.88
Price with VAT:
£10,226.25
APEX TOOLS
CLECO
MPRO300GCD
DISCONTINUED BY MANUFACTURER, NUTRUNNER CONTROLLER, 18/48 AIRLB, CONTROLS UP TO 16 TOOL, 50/60 HZ, 2A, 100/240 VAC, IP42, 1600 VA
✓ IN STOCK!
£2,892.17
Price with VAT:
£3,470.61
APEX TOOLS
CLECO
9336CMG
DWOS 6" PROSERIES DGNL CUTTING- GEN. PURPOSE SLD
£14.09
Price with VAT:
£16.91
APEX TOOLS
CLECO
8RSA-10BQ
1/4" BIT HOLDER, 800 RPM, INLINE HANDLE AIR SCREWDRIVER 15 TO 65 IN/LB TORQUE, 19 CFM
£1,375.92
Price with VAT:
£1,651.10
APEX TOOLS
CLECO
543025
DISC BACKING PAD: ADHESIVE & PSA 5/16-24 THREAD, 13,000 MAX RPM (MOQ=1, PKG QTY=1)
£28.18
Price with VAT:
£33.82
APEX TOOLS
CLECO
2465
1/4" QUICK CHANGE SCREWDRIVER PISTOL GRIP POS CL
£349.29
Price with VAT:
£419.14
APEX TOOLS
CLECO
19SPA04Q
1/4" BIT HOLDER, 1,100 RPM, INLINE HANDLE AIR SCREWDRIVER 10 TO 40 IN/LB TORQUE, 1/8" INLET, 11 CFM (MOQ=1, PKG QTY=1)
£1,061.21
Price with VAT:
£1,273.45
APEX TOOLS
CLECO
3060AVL-06
AIR ANGLE GRINDER: 6" WHEEL DIA, 6,000 RPM 5/8-11 SPINDLE, 21.9 CFM, 1/2" INLET, FRONT EXHAUST (MOQ=1, PKG QTY=1)
£551.00
Price with VAT:
£661.20
APEX TOOLS
CLECO
3060AVL-07
AIR ANGLE GRINDER: 7" WHEEL DIA, 6,000 RPM 5/8-11 SPINDLE, 21.9 CFM, 1/2" INLET, FRONT EXHAUST (MOQ=1, PKG QTY=1)
£651.11
Price with VAT:
£781.33
APEX TOOLS
CLECO
3060AVL-09
AIR ANGLE GRINDER: 9" WHEEL DIA, 6,000 RPM 5/8-11 SPINDLE, 21.9 CFM, 1/2" INLET, FRONT EXHAUST (MOQ=1, PKG QTY=1)
£588.82
Price with VAT:
£706.58
APEX TOOLS
CLECO
88RSA-5CQ
1/4" BIT HOLDER, 400 RPM, INLINE HANDLE AIR SCREWDRIVER 15 TO 160 IN/LB TORQUE, 19 CFM (MOQ=1, PKG QTY=1)
£1,792.41
Price with VAT:
£2,150.89
APEX TOOLS
CLECO
88RSAL-5CQ
1/4" BIT HOLDER, 400 RPM, INLINE HANDLE AIR SCREWDRIVER 15 TO 160 IN/LB TORQUE, 19 CFM (MOQ=1, PKG QTY=1)
£1,106.46
Price with VAT:
£1,327.76
APEX TOOLS
CLECO
CV-500R
AIR IMPACT WRENCH: 1/2" DRIVE, 8,500 RPM, 780 FT/LB 1/4" INLET, 19.5 CFM, 90 PSI, PISTOL GRIP (MOQ=1, PKG QTY=1)
£172.79
Price with VAT:
£207.35
APEX TOOLS
CLECO
CV-750P
AIR IMPACT WRENCH: 3/4" DRIVE, 5,500 RPM, 1,300 FT/LB 3/8" INLET, 64 CFM, 90 PSI, 1,300 BPM, PISTOL GRIP (MOQ=1, PKG QTY=1)
£451.62
Price with VAT:
£541.95
APEX TOOLS
CLECO
CWC-500R
AIR IMPACT WRENCH: 1/2" DRIVE, 8,000 RPM, 800 FT/LB 1/4" INLET, 64 CFM, 90 PSI, 1,250 BPM, PISTOL GRIP (MOQ=1, PKG QTY=1)
£288.48
Price with VAT:
£346.17
APEX TOOLS
CLECO
CWM-375P
AIR IMPACT WRENCH: 3/8" DRIVE, 12,000 RPM, 340 FT/LB 1/4" INLET, 54 CFM, 90 PSI, 1,400 BPM, PISTOL GRIP (MOQ=1, PKG QTY=1)
£186.14
Price with VAT:
£223.36
APEX TOOLS
CLECO
F4-PT-RT-B
AIR RIVET TOOL: 1/4" CAPACITY, 4" STROKE LENGTH 90 PSI (MOQ=1, PKG QTY=1)
£720.08
Price with VAT:
£864.09
APEX TOOLS
CLECO
MP4200
AIR DIE GRINDER: 1/8'' COLLET, 1/8 '' INLET 70,000 RPM, 0.1 HP, 8 CFM, REAR EXHAUST (MOQ=1, PKG QTY=1)
£206.16
Price with VAT:
£247.39
APEX TOOLS
CLECO
MP4201
AIR DIE GRINDER: 1/8'' COLLET, 1/4'' INLET 70,000 RPM, 0.1 HP, REAR EXHAUST (MOQ=1, PKG QTY=1)
£238.79
Price with VAT:
£286.55
APEX TOOLS
CLECO
MP4458
AIR DIE GRINDER: 1/4'' COLLET, 1/4'' INLET 25,000 RPM, 0.5 HP, 23 CFM, FRONT EXHAUST (MOQ=1, PKG QTY=1)
£239.53
Price with VAT:
£287.44
APEX TOOLS
CLECO
543017
DISC BACKING PAD: ADHESIVE & PSA 5/16-24 THREAD, 13,000 MAX RPM, (MOQ=1, PKG QTY=1)
£24.47
Price with VAT:
£29.37
APEX TOOLS
CLECO
543019
DISC BACKING PAD: HOOK & LOOP 5/16-24 THREAD, 13,000 MAX RPM (MOQ=1, PKG QTY=1)
£24.47
Price with VAT:
£29.37
