SEARCH NOW FOR ALL YOUR ALECO SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
APEX TOOLS
CLECO
35RNL10K-3
DISCONTINUED ITEM, CLECO 3/8" ANGLE NUTRUNNER 10-19 FT LBS. | 710 RPM
£1,779.80
Price with VAT:
£2,135.76
APEX TOOLS
CLECO
TME-111-15-U
DISCONTINUED BY MANUFACTURER,CONTROLLER AIR FOR ELECTRIC TOOL, 115 VAC, 50/60 HZ, 1 PHASE, 15 AMP, CLECO
✓ IN STOCK!
£2,883.13
Price with VAT:
£3,459.76
APEX TOOLS
CLECO
832100
DISCONTINUED BY MANUFACTURER, VALVE THROTTLE, 3/4IN LGT, 3/8IN DIA
✓ IN STOCK!
£0.62
Price with VAT:
£0.75
APEX TOOLS
CLECO
18ESE17D3
DISCONTINUED BY MANUFACTURER, TRANSDUCER CONTROL, INLINE CORDED, ELECTRIC NUTRUNNER, TORQUE RANGE MIN/MAX FT/LB: 2.95/12.5, 18 SERIES
£4,493.99
Price with VAT:
£5,392.79
APEX TOOLS
CLECO
48CSE36D3
DISCONTINUED BY MANUFACTURER, TRANSDUCER CONTROL, 5.9-26.6 FT-LBS, 8-36 NM, 1290 RPM, 3/8 IN OUTPUT DRIVE SIZE
£889.09
Price with VAT:
£1,066.91
APEX TOOLS
CLECO
18CSE06Q
DISCONTINUED BY MANUFACTURER, TRANSDUCER CONTROL, 1.5-4.4 FT-LBS, 2-6 NM, 4000 RPM, 1/4 IN HEX OUTPUT DRIVE SIZE
£889.09
Price with VAT:
£1,066.91
APEX TOOLS
CLECO
TME-121-15-U
DISCONTINUED BY MANUFACTURER, TIGHTENING MANAGER CONTROLLER, 2-CHANNEL, 15AMP, 115VAC, 50/60HZ, 1PH
✓ IN STOCK!
£700.63
Price with VAT:
£840.76
APEX TOOLS
CLECO
TME-211-15-U
DISCONTINUED BY MANUFACTURER, TIGHTENING MANAGER CONTROLLER, 2 CHANNEL, 115 VAC, 1 PHASE, 15 AMP, 50/60 HZ, ETHERNET, 16.5 INCH WIDTH, 17.5 INCH HEIGHT, 12.3 INCH DEPTH
✓ IN STOCK!
£2,802.55
Price with VAT:
£3,363.06
APEX TOOLS
CLECO
EMT600-2R6-1-29P
DISCONTINUED BY MANUFACTURER, SPINDLE MOTOR ASSEMBLY 1IN CHUCK
£4,433.92
Price with VAT:
£5,320.71
ALLEN BRADLEY
VEECO
JYKG76-01MC-V3
DISCONTINUED BY MANUFACTURER, SHORT CIRCUIT SYSTEM UNIT, INPUT: 10.5 AMP 1 PHASE 230 VAC 60 HZ, OUTPUT: 10.5 AMP 230 VAC, 200.000 RMS, 200 KA
£4,957.67
Price with VAT:
£5,949.20
APEX TOOLS
CLECO
TME-211-30-D-GM03
DISCONTINUED BY MANUFACTURER, SAFETY CONTROLLER, TIGHTENING MANAGER, TM200 SERIES, 1 PHASE, 10 AMP, 230 VAC, 50/60 HZ
£1,790.92
Price with VAT:
£2,149.11
APEX TOOLS
CLECO
MR10R097M
DISCONTINUED BY MANUFACTURER, ROTARY VANE MOTOR, MR10 SERIES, FOOT MOUNTING, 5/8” (NON-GEARED) OR 7/8” (GEARED) DIAMETER KEYED SPINDLE, 1 HP
£1,795.97
Price with VAT:
£2,155.16
APEX TOOLS
CLECO
31MRR914M
DISCONTINUED BY MANUFACTURER, REVERSIBLE AIR ACTUATED MOTOR, 0.3 HP, 14.28:1 GEAR RATIO, 1, 000 MAX RPM, 0.59 " SHAFT LENGTH, 7.62 " OAL, 3/8 " SHAFT DIAM
£889.90
Price with VAT:
£1,067.88
APEX TOOLS
CLECO
5RS A-10B
DISCONTINUED BY MANUFACTURER, PNUMATIC SCREWDRIVER
£935.02
Price with VAT:
£1,122.02
APEX TOOLS
CLECO
47EA60AM4
DISCONTINUED BY MANUFACTURER, NUTRUNNER, 47EA SERIES, CORDED, 485 RPM, 61 NM MAX TORQUE, RIGHT ANGLE, ELECTRIC TRANSDUCER CONTROL
✓ IN STOCK!
£1,985.14
Price with VAT:
£2,382.16
APEX TOOLS
CLECO
MPRO400GC-P
DISCONTINUED BY MANUFACTURER, NUTRUNNER CONTROLLER, 18/48 AIRLB, CONTROLS UP TO 16 TOOL, 50/60 HZ, 2A, 115/230 VAC
✓ IN STOCK!
£2,228.73
Price with VAT:
£2,674.48
APEX TOOLS
CLECO
MPRO300GCD
DISCONTINUED BY MANUFACTURER, NUTRUNNER CONTROLLER, 18/48 AIRLB, CONTROLS UP TO 16 TOOL, 50/60 HZ, 2A, 100/240 VAC, IP42, 1600 VA
✓ IN STOCK!
£2,892.17
Price with VAT:
£3,470.61
APEX TOOLS
CLECO
47EA43AM3
DISCONTINUED BY MANUFACTURER, NUTRUNNER / RIGHT ANGLE, 47EA SERIES, 3/8 INCH BOLT SIZE, DC BRUSHLESS, LEVER START, MAX TORQUE 43 NM, 685 RPM FREE SPEED, 31.7-6.6 FT LB, 43-9 NM, 17.7 INCH LE ...
✓ IN STOCK!
£804.71
Price with VAT:
£965.65
APEX TOOLS
CLECO
24RAS13AM3
DISCONTINUED BY MANUFACTURER, NUTRUNNER / ANGLE, SERIES 24, CLUTCH SHUT OFF, LEVER START, COLLAR REVERSE, 7.0-14.0 TORQUE RANGE, 700 -1/MIN FREE SPEED, 3/8 INCH SQUARE DRIVE
✓ IN STOCK!
£2,343.60
Price with VAT:
£2,812.32
APEX TOOLS
CLECO
542778-8M
DISCONTINUED BY MANUFACTURER, ELECTRIC TOOL CABLE, 8M
£1,357.10
Price with VAT:
£1,628.52
APEX TOOLS
CLECO
47BAXB15AM3
DISCONTINUED BY MANUFACTURER, EC TOOL, 47 SERIES, CORDLESS, BATTERY POWER, RIGHT-ANGLE, WLAN: 2.4 GHZ, BATTERY: 48 V MAX., 15 NM, ATTACHMENT: SQUARE 3/8", LOCKING: PIN
✓ IN STOCK!
£678.97
Price with VAT:
£814.76
APEX TOOLS
CLECO
EMT600-2R6-1"-APM
DISCONTINUED BY MANUFACTURER, DC ELECTRIC ASSEMBLY TOOL
£2,748.82
Price with VAT:
£3,298.58
APEX TOOLS
CLECO
MPRO400GC-M
DISCONTINUED BY MANUFACTURER, CONTROLLER, MASTER, 18-48 AIRLB,115-230 VAC, 50/60 HZ, 2 AMP, 250 VA POWER RATING, IP52, CONTROLS UP TO 16 TOOLS, CORDLESS, BTS SERIES
£4,160.28
Price with VAT:
£4,992.34
APEX TOOLS
CLECO
TMEM-114-15-U-IO
DISCONTINUED BY MANUFACTURER, CONTROLLER TIGHTENING MANAGER, 16 AMP, 115 VAC, 50/60 HZ, 1 PHASE
£1,919.29
Price with VAT:
£2,303.15
APEX TOOLS
CLECO
MPRO400GC-I
DISCONTINUED BY MANUFACTURER, CONTROL, TRANSDUCER CURRENT CONTROL, 115/230 VAC, 50/60 HZ, 2 AMP, 250 VA
£889.09
Price with VAT:
£1,066.91
APEX TOOLS
CLECO
18ES31D3
DISCONTINUED BY MANUFACTURER, CLECO 18ES31D3 NUTRUNNER, 695 RPM, TORQ 31.8
✓ IN STOCK!
£3,036.09
Price with VAT:
£3,643.30
APEX TOOLS
CLECO
TME-111-15-U-EN
DISCONTINUED BY MANUFACTURER, CHANNEL TIGHTENING MANAGER CONTROLLER, 115V, 50/60HZ, 1PH, 15AMP
✓ IN STOCK!
£959.48
Price with VAT:
£1,151.38
APEX TOOLS
CLECO
542778-3M
DISCONTINUED BY MANUFACTURER, CABLE, 3M, FOR ELECTRONICALLY CONTROLLED CROWFOOT NUTRUNNER
✓ IN STOCK!
£525.63
Price with VAT:
£630.76
APEX TOOLS
CLECO
544055-10M
DISCONTINUED BY MANUFACTURER, CABLE, 18/48E SERIES, ANGLE SWIVEL TYPE, BAJONETT CABLE, FOR DC NUTSETTER
£327.04
Price with VAT:
£392.45
APEX TOOLS
CLECO
935377
DISCONTINUED BY MANUFACTURER, BATTERY, 26V
✓ IN STOCK!
£201.75
Price with VAT:
£242.10
ADE CORPORATION
ALLEN BRADLEY
1746N18A
DISCONTINUED BY MANUFACTURER, ANALOG INPUT MODULE, SLC 500, 8 POINT, 20 MA, 10 VDC, FAST SIGNAL CONVERSION
£295.73
Price with VAT:
£354.88
APEX TOOLS
CLECO
TVP-110-15-U
DISCONTINUED BY MANUFACTERER, PNEUMATIC QUALIFIER, 110-230 VAC, 50/60HZ, SINGLE PHASE, W/ INTERFACE AND KEYPAD
✓ IN STOCK!
£2,198.52
Price with VAT:
£2,638.22
APEX TOOLS
CLECO
TVP-110-15-U-D
DISCONTINUED BY MANUFACTERER, PNEUMATIC QUALIFIER, 110-230 VAC, 50/60HZ, SINGLE PHASE, W/ INTERFACE AND KEYPAD
£2,158.01
Price with VAT:
£2,589.61
APEX TOOLS
CLECO
543019
DISC BACKING PAD: HOOK & LOOP 5/16-24 THREAD, 13,000 MAX RPM (MOQ=1, PKG QTY=1)
£24.47
Price with VAT:
£29.37
APEX TOOLS
CLECO
543017
DISC BACKING PAD: ADHESIVE & PSA 5/16-24 THREAD, 13,000 MAX RPM, (MOQ=1, PKG QTY=1)
£24.47
Price with VAT:
£29.37
APEX TOOLS
CLECO
543025
DISC BACKING PAD: ADHESIVE & PSA 5/16-24 THREAD, 13,000 MAX RPM (MOQ=1, PKG QTY=1)
£28.18
Price with VAT:
£33.82
ADE CORPORATION
ALLEN BRADLEY
17460A8
DIGITAL OUTPUT MODULE, SLC 500, 8 CHANNEL, CURRENT SOURCING, 85-265 VAC, OPEN STYLE
£102.33
Price with VAT:
£122.80
Repair Yours
Contact Us
APEX TOOLS
CLECO
CLBP04Q
CORDLESS SCREWDRIVERS; HANDLE TYPE: PISTOL GRIP ; VOLTAGE: 18.00 ; SPEED (RPM): 1700 ; BATTERIES INCLUDED: NO ; BATTERY CHEMISTRY: LITHIUM-ION ; BATTERY REPLACEMENT NUMBER: MILWAUKEE. M18 RE ...
£491.67
Price with VAT:
£590.00
APEX TOOLS
CLECO
TME-111-15-U-DC01
CONTROL, 115VAC, 15A, 50/60HZ, 1PH
✓ IN STOCK!
£2,332.31
Price with VAT:
£2,798.77
APEX TOOLS
CLECO
TVP-100-30-D
CLECO, TVP-100-30-D, TVP10030D, TORQUE VERIFIER, 115/230VAC, 50/60HZ, 1AMP, 1PHASE
£1,572.16
Price with VAT:
£1,886.59
APEX TOOLS
CLECO
935391
CLECO, 935391, CHARGER FOR 26V LI-ION BATTERY, 110-240VAC, 50/60HZ
£26.70
Price with VAT:
£32.04
Repair Yours
Contact Us
APEX TOOLS
CLECO
14TTA15Q
CLECO, 14TTA15Q, PNEUMATIC SCREWDRIVER, 6.2BAR, 4.0-14.7NM
£895.83
Price with VAT:
£1,075.00
ALECO
173106
CLEAR REPLACEMENT VINYL STRIP STANDARD DOCK CURTAIN STRIPS 48 INCH WIDE X 60' LONG X 0.06 INCH THICK, PVC
£269.19
Price with VAT:
£323.03
APEX TOOLS
CLECO
TME-111-15-U-ED
CHANNEL TIGHTENING MANAGER CONTROLLER, 115V, 50/60HZ, 1PH, 15AMP
£1,060.04
Price with VAT:
£1,272.05
