Product Search

    SEARCH NOW FOR ALL YOUR ALEMITE SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Electrical Products / Conduit/Fitting

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 51-100 of 205.
    ALEMITE 44701

    ALEMITE

    44701

    DISCONTINUED BY MANUFACTURER, GREASE FITTING ADAPTER, 90 HEAD ANGLE, 1 INCH OVERALL HEIGHT, 7/16 INCH SHANK LENGTH
    Buy Surplus As Low As £4.53 Price with VAT: £5.44
    £4.53 Price with VAT: £5.44
    ALEMITE 47100

    ALEMITE

    47100

    1/8 THREAD, 45 TO 80 PSI RELIEF PRESSURE, STEEL, ZINC PLATED, RELIEF VENT 7/16 INCH HEX FLATS DIAM
    £2.42 Price with VAT: £2.90 Buy Surplus As Low As £1.45 Price with VAT: £1.74
    £1.45 Price with VAT: £1.74
    ALEMITE 50500

    ALEMITE

    50500

    1/8"PTF 400-650PSI RELIE
    £2.49 Price with VAT: £2.99 Buy Surplus As Low As £1.49 Price with VAT: £1.79
    £1.49 Price with VAT: £1.79
    ALEMITE 1607-B

    ALEMITE

    1607-B

    STRAIGHT HEAD ANGLE, 1/8 PTF STEEL STANDARD GREASE FITTING 7/16 INCH HEX, 1-1/4 INCH OVERALL HEIGHT, 25/32 INCH SHANK LENGTH, 10,000 OPERATING PSI, ZINC PLATED FINISH
    £1.71 Price with VAT: £2.05 Buy Surplus As Low As £1.03 Price with VAT: £1.23
    £1.03 Price with VAT: £1.23
    ALEMITE 1612-B

    ALEMITE

    1612-B

    1/8"PTF 65DEG. GREASE FI
    £0.99 Price with VAT: £1.19 Buy Surplus As Low As £0.60 Price with VAT: £0.72
    £0.60 Price with VAT: £0.72
    ALEMITE 1630-B1

    ALEMITE

    1630-B1

    5/16" DRIVE TYPE GREASE
    £1.72 Price with VAT: £2.06 Buy Surplus As Low As £1.03 Price with VAT: £1.24
    £1.03 Price with VAT: £1.24
    ALEMITE 1631-B

    ALEMITE

    1631-B

    STRAIGHT HEAD ANGLE, 5/16-32 UNEF-2A NICKEL/COPPER STANDARD GREASE FITTING 3/8 INCH HEX, 21/32 INCH OVERALL HEIGHT, 15/64 INCH SHANK LENGTH, ZINC PLATED FINISH
    £0.74 Price with VAT: £0.89 Buy Surplus As Low As £0.45 Price with VAT: £0.53
    £0.45 Price with VAT: £0.53
    ALEMITE 1633

    ALEMITE

    1633

    STRAIGHT HEAD ANGLE, DRIVE-IN GREASE FITTING 5/8 INCH OVERALL HEIGHT, 1/4 INCH SHANK LENGTH, ZINC PLATED FINISH
    £0.42 Price with VAT: £0.50 Buy Surplus As Low As £0.25 Price with VAT: £0.30
    £0.25 Price with VAT: £0.30
    ALEMITE 1644-B

    ALEMITE

    1644-B

    1/8"PT EXTRA SHORT GREAS
    £0.53 Price with VAT: £0.63 Buy Surplus As Low As £0.32 Price with VAT: £0.38
    £0.32 Price with VAT: £0.38
    ALEMITE 1646-B1

    ALEMITE

    1646-B1

    DRIVE FITTING, FOR 3/16" DRILL, 65 DEGREE ANGLE, 45/64" OAL, 7/32" SHANK LENGTH
    £1.61 Price with VAT: £1.93 Buy Surplus As Low As £0.96 Price with VAT: £1.16
    £0.96 Price with VAT: £1.16
    ALEMITE 1649-B

    ALEMITE

    1649-B

    FITTING
    £4.96 Price with VAT: £5.96 Buy Surplus As Low As £2.98 Price with VAT: £3.57
    £2.98 Price with VAT: £3.57
    ALEMITE 1650

    ALEMITE

    1650

    STRAIGHT HEAD ANGLE, STEEL LEAKPROOF GREASE FITTING, 1/8 PTF THREAD, 7/16 INCH HEX, 29/32 INCH OVERALL HEIGHT, 25/64 INCH SHANK LENGTH, 5, 000 OPERATING PSI, ZINC PLATED FINISH
    £3.29 Price with VAT: £3.94 Buy Surplus As Low As £1.97 Price with VAT: £2.37
    £1.97 Price with VAT: £2.37
    ALEMITE 1680-B

    ALEMITE

    1680-B

    STRAIGHT HEAD ANGLE, 1/4-28 NPT STEEL STANDARD GREASE FITTING 5/16 INCH HEX, 31/32 INCH OVERALL HEIGHT, 5/8 INCH SHANK LENGTH, 10,000 OPERATING PSI
    £1.11 Price with VAT: £1.33 Buy Surplus As Low As £0.67 Price with VAT: £0.80
    £0.67 Price with VAT: £0.80
    ALEMITE 1684-B

    ALEMITE

    1684-B

    DISCONTINUED BY MANUFACTURER, STRAIGHT HEAD ANGLE, 1/8 PTF CARBON STEEL STANDARD GREASE FITTING 3/8 INCH HEX, 2-5/8 INCH OVERALL HEIGHT, 2-3/16 INCH SHANK LENGTH, 10,000 OPERATING PSI, ZINC ...
    Buy Surplus As Low As £4.51 Price with VAT: £5.41
    £4.51 Price with VAT: £5.41
    ALEMITE 1688-B

    ALEMITE

    1688-B

    HYDRAULIC FITTING, ELBOW, 1/8" PTF, 45 DEG, 57/64 INCH, MALE/MALE, GREASE FITTING
    £1.69 Price with VAT: £2.03 Buy Surplus As Low As £1.02 Price with VAT: £1.22
    £1.02 Price with VAT: £1.22
    ALEMITE 1692

    ALEMITE

    1692

    FITTING
    £3.93 Price with VAT: £4.71 Buy Surplus As Low As £2.36 Price with VAT: £2.83
    £2.36 Price with VAT: £2.83
    ALEMITE 1720-B

    ALEMITE

    1720-B

    STRAIGHT HEAD ANGLE, 1/8 TAPER NICKEL/COPPER THREAD-FORMING GREASE FITTING 7/16 INCH HEX, 0.62 INCH OVERALL HEIGHT, ZINC PLATED FINISH
    £0.58 Price with VAT: £0.69 Buy Surplus As Low As £0.35 Price with VAT: £0.41
    £0.35 Price with VAT: £0.41
    ALEMITE 1723-B

    ALEMITE

    1723-B

    90° HEAD ANGLE, 1/8 TAPER NICKEL/COPPER THREAD-FORMING GREASE FITTING 7/16 INCH HEX, 0.76 INCH OVERALL HEIGHT, ZINC PLATED FINISH
    £1.65 Price with VAT: £1.98 Buy Surplus As Low As £0.99 Price with VAT: £1.19
    £0.99 Price with VAT: £1.19
    ALEMITE 1724B

    ALEMITE

    1724B

    45 DEGR. THREAD FORMING
    £1.12 Price with VAT: £1.35 Buy Surplus As Low As £0.67 Price with VAT: £0.81
    £0.67 Price with VAT: £0.81
    ALEMITE 1792-B

    ALEMITE

    1792-B

    STRAIGHT HEAD ANGLE, 1/4-28 UNF-2A NICKEL/COPPER STANDARD GREASE FITTING 9/32 INCH HEX, 33/64 INCH OVERALL HEIGHT, 5/32 INCH SHANK LENGTH, ZINC PLATED FINISH
    £0.41 Price with VAT: £0.49 Buy Surplus As Low As £0.24 Price with VAT: £0.29
    £0.24 Price with VAT: £0.29
    ALEMITE 1795-B

    ALEMITE

    1795-B

    FITTING
    £11.34 Price with VAT: £13.60 Buy Surplus As Low As £6.80 Price with VAT: £8.16
    £6.80 Price with VAT: £8.16
    ALEMITE 1814

    ALEMITE

    1814

    FITTING
    £0.40 Price with VAT: £0.48 Buy Surplus As Low As £0.24 Price with VAT: £0.29
    £0.24 Price with VAT: £0.29
    ALEMITE 183226

    ALEMITE

    183226

    HYD FTG STR THD 1/4-28 T
    £0.40 Price with VAT: £0.48 Buy Surplus As Low As £0.24 Price with VAT: £0.29
    £0.24 Price with VAT: £0.29
    ALEMITE 1851

    ALEMITE

    1851

    STRAIGHT HEAD ANGLE, 1/4-28 UNF FLUSH-STYLE GREASE FITTING 13/32 INCH OVERALL HEIGHT, 19/64 INCH SHANK LENGTH, ZINC PLATED FINISH
    £2.09 Price with VAT: £2.51 Buy Surplus As Low As £1.25 Price with VAT: £1.51
    £1.25 Price with VAT: £1.51
    ALEMITE 1885

    ALEMITE

    1885

    DRIVE FITTING, FLUSH TYPE, FOR 1/4" DRILL
    £1.94 Price with VAT: £2.33 Buy Surplus As Low As £1.16 Price with VAT: £1.40
    £1.16 Price with VAT: £1.40
    ALEMITE 1952A

    ALEMITE

    1952A

    DRV FTG STR NBC 15/32X1/
    £0.72 Price with VAT: £0.87 Buy Surplus As Low As £0.43 Price with VAT: £0.52
    £0.43 Price with VAT: £0.52
    ALEMITE 1958

    ALEMITE

    1958

    STRAIGHT HEAD ANGLE, 1/8 PTF CARBON STEEL STANDARD GREASE FITTING 7/16 INCH HEX, 31/32 INCH OVERALL HEIGHT, 1/4 INCH SHANK LENGTH, 10,000 OPERATING PSI, ZINC PLATED FINISH
    £5.00 Price with VAT: £6.00 Buy Surplus As Low As £3.00 Price with VAT: £3.60
    £3.00 Price with VAT: £3.60
    ALEMITE 1966-S

    ALEMITE

    1966-S

    STRAIGHT HEAD ANGLE, 1/4-28 TAPER STAINLESS STEEL STANDARD GREASE FITTING 5/16 INCH HEX, 17/32 INCH OVERALL HEIGHT, 3/16 INCH SHANK LENGTH
    £1.83 Price with VAT: £2.19 Buy Surplus As Low As £1.10 Price with VAT: £1.32
    £1.10 Price with VAT: £1.32
    ALEMITE 1634-B

    ALEMITE

    1634-B

    HIGH PRESSURE OILTIGHT H
    £3.57 Price with VAT: £4.28 Buy Surplus As Low As £2.14 Price with VAT: £2.57
    £2.14 Price with VAT: £2.57
    ALEMITE 1638-B

    ALEMITE

    1638-B

    FITTING
    £1.58 Price with VAT: £1.90 Buy Surplus As Low As £0.95 Price with VAT: £1.14
    £0.95 Price with VAT: £1.14
    ALEMITE 1641-B

    ALEMITE

    1641-B

    HYDRAULIC FITTING, STRAIGHT, GREASED THREADS, 1/4"-28
    £0.37 Price with VAT: £0.44 Buy Surplus As Low As £0.23 Price with VAT: £0.27
    £0.23 Price with VAT: £0.27
    ALEMITE 1652-B

    ALEMITE

    1652-B

    STRAIGHT HEAD ANGLE, 1/4-28 TAPER CARBON STEEL TAPER THREAD GREASE FITTING 5/16 INCH HEX, 11/16 INCH OVERALL HEIGHT, 23/64 INCH SHANK LENGTH, 10,000 OPERATING PSI, ZINC PLATED FINISH
    £0.58 Price with VAT: £0.69 Buy Surplus As Low As £0.35 Price with VAT: £0.41
    £0.35 Price with VAT: £0.41
    ALEMITE 1666

    ALEMITE

    1666

    37/64X3/8 DRILL DRIVE FI
    £0.58 Price with VAT: £0.70 Buy Surplus As Low As £0.35 Price with VAT: £0.42
    £0.35 Price with VAT: £0.42
    ALEMITE 1675-B

    ALEMITE

    1675-B

    RIVET FITTING 1/2X5/16 D
    £0.58 Price with VAT: £0.69 Buy Surplus As Low As £0.35 Price with VAT: £0.41
    £0.35 Price with VAT: £0.41
    ALEMITE 1693

    ALEMITE

    1693

    90° HEAD ANGLE, 1/8 NPTF STEEL LEAKPROOF GREASE FITTING 7/16 INCH HEX, 31/32 INCH OVERALL HEIGHT, 25/64 INCH SHANK LENGTH, 5,000 OPERATING PSI, ZINC PLATED FINISH
    £6.53 Price with VAT: £7.83 Buy Surplus As Low As £3.92 Price with VAT: £4.70
    £3.92 Price with VAT: £4.70
    ALEMITE 1698-B

    ALEMITE

    1698-B

    1/4"-28 TAPER THREAD GRE
    £1.45 Price with VAT: £1.74 Buy Surplus As Low As £0.87 Price with VAT: £1.05
    £0.87 Price with VAT: £1.05
    ALEMITE 1711-B

    ALEMITE

    1711-B

    STRAIGHT HEAD ANGLE, 5/16-24 UNEF-2A NICKEL/COPPER STANDARD GREASE FITTING 3/8 INCH HEX, 21/32 INCH OVERALL HEIGHT, 5/32 INCH SHANK LENGTH, ZINC PLATED FINISH
    £1.10 Price with VAT: £1.32 Buy Surplus As Low As £0.67 Price with VAT: £0.80
    £0.67 Price with VAT: £0.80
    ALEMITE 1728S

    ALEMITE

    1728S

    3/16 DRIVE, HYD FITTING
    £0.72 Price with VAT: £0.87 Buy Surplus As Low As £0.43 Price with VAT: £0.52
    £0.43 Price with VAT: £0.52
    ALEMITE 1736-A

    ALEMITE

    1736-A

    1/8"DRIVE TYPE GREASE FI
    £0.38 Price with VAT: £0.45 Buy Surplus As Low As £0.23 Price with VAT: £0.27
    £0.23 Price with VAT: £0.27
    ALEMITE 1820-1

    ALEMITE

    1820-1

    BUTTON HEAD FITTING, STRAIGHT HEAD ANGLE, 1/2 NPTF, 1 1/16 INCHES, MALE/MALE, GREASE FITTING 7/8 INCH HEX, 1/2 INCH SHANK LENGTH, 15000 OPERATING PSI, ZINC PLATED FINISH
    £9.82 Price with VAT: £11.79 Buy Surplus As Low As £5.89 Price with VAT: £7.07
    £5.89 Price with VAT: £7.07
    ALEMITE 1822-A1

    ALEMITE

    1822-A1

    STRAIGHT HEAD ANGLE, 3/8 NPTF BUTTON-HEAD GREASE FITTING 7/8 INCH HEX, 1-5/16 INCH OVERALL HEIGHT, 9/16 INCH SHANK LENGTH, 15,000 OPERATING PSI, ZINC PLATED FINISH
    £5.32 Price with VAT: £6.39 Buy Surplus As Low As £3.19 Price with VAT: £3.83
    £3.19 Price with VAT: £3.83
    ALEMITE 1823-1

    ALEMITE

    1823-1

    BUTTON HEAD FITTING, STRAIGHT HEAD ANGLE, 1/4 INCH NPTF THREAD, 7/8 INCH HEX SIZE, 1-1/4 INCH OVERALL LENGTH, 1/2 INCH SHANK LENGTH, 15000 OPERATING PSI, ZINC PLATED FINISH
    £8.31 Price with VAT: £9.98 Buy Surplus As Low As £4.99 Price with VAT: £5.99
    £4.99 Price with VAT: £5.99
    ALEMITE 1921-B

    ALEMITE

    1921-B

    NON-CORRISIVE FITTING
    £25.69 Price with VAT: £30.83 Buy Surplus As Low As £15.87 Price with VAT: £19.04
    £15.87 Price with VAT: £19.04
    ALEMITE 1921-S

    ALEMITE

    1921-S

    STANDARD GREASE FITTING: 30 ° HEAD, 1/8" PTF 7/16" HEX, STAINLESS STEEL (MOQ=1, PKG QTY=1)
    £15.87 Price with VAT: £19.04 Buy Surplus As Low As £9.82 Price with VAT: £11.79
    £9.82 Price with VAT: £11.79
    ALEMITE 1922-B

    ALEMITE

    1922-B

    MONEL FITTING, THREAD 1/8IN PTF TAPER, HEX SIZE 7/16IN, OVERALL LENGTH 61/64IN, SHANK LENGTH 11/32IN, NON-CORRIS
    £25.69 Price with VAT: £30.83 Buy Surplus As Low As £15.87 Price with VAT: £19.04
    £15.87 Price with VAT: £19.04
    ALEMITE 1958E

    ALEMITE

    1958E

    HYD FTG (STEEL) W/ DUST CAP
    £9.82 Price with VAT: £11.79 Buy Surplus As Low As £5.77 Price with VAT: £6.92
    £5.77 Price with VAT: £6.92
    ALEMITE 1961-B

    ALEMITE

    1961-B

    DISCONTINUED BY MANUFACTURER, GREASE FITTING, STRAIGHT HEAD ANGLE, 1/8IN PTF, NICKEL/COPPER, STANDARD, 7/16IN HEX, 3/4IN OVERALL HEIGHT, 5/16IN SHANK LENGTH, NO REPLACEMENT
    Buy Surplus As Low As £14.15 Price with VAT: £16.98
    £14.15 Price with VAT: £16.98
    ALEMITE 1961-S

    ALEMITE

    1961-S

    DISCONTINUED BY MANUFACTURER, FITTING, NON CORROSIVE, 1/8"PTF, STRAIGHT, SS
    Buy Surplus As Low As £5.14 Price with VAT: £6.17
    £5.14 Price with VAT: £6.17
    ALEMITE 1962-B

    ALEMITE

    1962-B

    DISCONTINUED BY MANUFACTURER, STRAIGHT HEAD ANGLE, 1/8 PTF NICKEL/COPPER STANDARD GREASE FITTING 7/16 INCH HEX, 5/8 INCH OVERALL HEIGHT, 9/32 INCH SHANK LENGTH
    Buy Surplus As Low As £34.01 Price with VAT: £40.81
    £34.01 Price with VAT: £40.81
    ALEMITE 1968-S

    ALEMITE

    1968-S

    1/4" 28 TAPER 45 DEGREE
    £6.30 Price with VAT: £7.56 Buy Surplus As Low As £3.78 Price with VAT: £4.53
    £3.78 Price with VAT: £4.53
    Previous Next
    1 2 3 4 5