SEARCH NOW FOR ALL YOUR APEX TOOLS SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
APEX TOOLS
CLECO
48EAE41AM3
ELECTRIC NUTRUNNER, 48 SERIES, RIGHT ANGLE, TRANSDUCER CONTROL, 41NM, 6.6-30.3FT/LB TORQUE, 17.3IN LENGTH, 1090RPM
✓ IN STOCK!
£8,521.88
Price with VAT:
£10,226.25
APEX TOOLS
CLECO
17EP06Q
NUTRUNNER, 17EP SERIES, PISTOL GRIP, 2600 RPM FREE SPEED, 4.4-1.5 FT LB, 6-2 NM, #10 BOLT SIZE, 7 INCH LENGTH, 0.84 INCH SIDE TO CENTER
✓ IN STOCK!
£3,354.76
Price with VAT:
£4,025.71
APEX TOOLS
CLECO
18EAE15AM3
NUTRUNNER, SERIES 18, RIGHT ANGLE, CORDED ELECTRIC TRANSDUCER CONTROL, TORQUE RANGE 2.95-11.1 FT LBS / 4-15 NM
✓ IN STOCK!
£3,115.85
Price with VAT:
£3,739.02
APEX TOOLS
CLECO
TME-211-15-U
DISCONTINUED BY MANUFACTURER, TIGHTENING MANAGER CONTROLLER, 2 CHANNEL, 115 VAC, 1 PHASE, 15 AMP, 50/60 HZ, ETHERNET, 16.5 INCH WIDTH, 17.5 INCH HEIGHT, 12.3 INCH DEPTH
✓ IN STOCK!
£2,802.55
Price with VAT:
£3,363.06
APEX TOOLS
CLECO
TME-111-30-D
TIGHTENING MANAGER 10AMPS 230V
✓ IN STOCK!
£3,078.40
Price with VAT:
£3,694.08
APEX TOOLS
CLECO
34RAA47AX3
PNEUMATIC NUTRUNNER, SERIES 34
✓ IN STOCK!
£1,974.24
Price with VAT:
£2,369.09
APEX TOOLS
HK PORTER
183-18-0961-0
DISCONTINUED BY MANUFACTURER, DC MOTOR, NAGNETIC
✓ IN STOCK!
£1,793.34
Price with VAT:
£2,152.01
APEX TOOLS
COOPER TOOLS
933872
APEX TOOLS,933872, MOTOR,NUTRUNNER MOTOR,BRUSHLESS,320V,2.8A, 5000RPM, REVERSIBLE,29/12PIN PLUGS,5000 RPM,300 V,2.8AMP 2BB SERIES,
✓ IN STOCK!
£2,836.95
Price with VAT:
£3,404.34
APEX TOOLS
CLECO
24RAA19AM3
NUTRUNNER / ANGLE, SERIES 24, CLUTCH SHUT OFF, LEVER START, COLLAR REVERSE, 7.0-14.0 TORQUE RANGE, 700 -1/MIN FREE SPEED, 3/8 INCH SQUARE DRIVE OUTPUT, 15 INCH LENGTH, 0.52 INCH SIDE TO CENT ...
✓ IN STOCK!
£1,919.68
Price with VAT:
£2,303.62
APEX TOOLS
CLECO
24RAS13AM3
DISCONTINUED BY MANUFACTURER, NUTRUNNER / ANGLE, SERIES 24, CLUTCH SHUT OFF, LEVER START, COLLAR REVERSE, 7.0-14.0 TORQUE RANGE, 700 -1/MIN FREE SPEED, 3/8 INCH SQUARE DRIVE
✓ IN STOCK!
£2,343.60
Price with VAT:
£2,812.32
APEX TOOLS
CLECO
TME-111-15-U
DISCONTINUED BY MANUFACTURER,CONTROLLER AIR FOR ELECTRIC TOOL, 115 VAC, 50/60 HZ, 1 PHASE, 15 AMP, CLECO
✓ IN STOCK!
£2,883.13
Price with VAT:
£3,459.76
APEX TOOLS
CLECO
TME-111-15-U-DC01
CONTROL, 115VAC, 15A, 50/60HZ, 1PH
✓ IN STOCK!
£2,332.31
Price with VAT:
£2,798.77
APEX TOOLS
COOPER TOOLS
74124AA7
GEAR MOTOR, 7.7 HP, 3 IN SHAFT
✓ IN STOCK!
£2,207.55
Price with VAT:
£2,649.06
APEX TOOLS
COOPER TOOLS
P34038930300
DISCONTINUED BY MANUFACTURER, PROBE DRIVER, 18V
✓ IN STOCK!
£2,139.10
Price with VAT:
£2,566.92
APEX TOOLS
CLECO
MPRO400GC-P
DISCONTINUED BY MANUFACTURER, NUTRUNNER CONTROLLER, 18/48 AIRLB, CONTROLS UP TO 16 TOOL, 50/60 HZ, 2A, 115/230 VAC
✓ IN STOCK!
£2,228.73
Price with VAT:
£2,674.48
APEX TOOLS
COOPER TOOLS
960901
DISCONTINUED BY MANUFACTURER, SERVO DRIVE, STM34, INPUT VOLTAGE 230VAC, RS-232 COMMUNICATION, RESOLVER FEEDBACK
✓ IN STOCK!
£2,081.08
Price with VAT:
£2,497.30
APEX TOOLS
CLECO
5RNAL-254BH-3
NUTRUNNER / ANGLE, CLECOMATIC CLUTCH, 5 SERIES, LEVER START, TWIST RING REVERSE, 1/4 INCH BOLT SIZE, 500 RPM FREE SPEED, 75-10 IN LB, 8.5-1.1 NM, 13.9 INCH LENGTH, 1.2 INCH HEAD HEIGHT, 0.5 ...
✓ IN STOCK!
£1,370.70
Price with VAT:
£1,644.84
APEX TOOLS
CLECO
TVP-110-15-U
DISCONTINUED BY MANUFACTERER, PNEUMATIC QUALIFIER, 110-230 VAC, 50/60HZ, SINGLE PHASE, W/ INTERFACE AND KEYPAD
✓ IN STOCK!
£2,198.52
Price with VAT:
£2,638.22
APEX TOOLS
CLECO
WP-2049-6
IMPACT WRENCH, WP SERIES, BIASED, REVERSE POWER, 125-550 FT LB, 170-750 NM, 6000 RPM, 1000 IPM, 3/4 INCH SQUARE DRIVE, 6.4 INCH LENGTH, 1.6 INCH SIDE TO CENTER
✓ IN STOCK!
£1,288.54
Price with VAT:
£1,546.25
APEX TOOLS
CLECO
TME-111-15-U-EN
DISCONTINUED BY MANUFACTURER, CHANNEL TIGHTENING MANAGER CONTROLLER, 115V, 50/60HZ, 1PH, 15AMP
✓ IN STOCK!
£959.48
Price with VAT:
£1,151.38
APEX TOOLS
COOPER TOOLS
30PTHLC35Q
NUTRUNNER, PISTOL GRIP, 30 NM, TORQUE CONTROL, HYDRAUYLIC PULSE MECHANISM, LONG GRIP LENGTH, SIGNAL PORT, 3500 RPM, QUICK CHANGE 1/4 INCH
✓ IN STOCK!
£892.58
Price with VAT:
£1,071.10
APEX TOOLS
HK PORTER
183-18-1279-0
DISCONTINUED BY MANUFACTURER, DC MOTOR, FLUSH MOUNT, KEYWAY SHAFT
✓ IN STOCK!
£882.28
Price with VAT:
£1,058.74
APEX TOOLS
COOPER TOOLS
S961450-003
MONITOR CONTROLLER INTERFACE .7AMP 24VDC
✓ IN STOCK!
£1,084.38
Price with VAT:
£1,301.26
APEX TOOLS
CLECO
35STHF404
PULSE NUTSETTER, INCLINE PULSE SHUT-OFF, NUTSETTER, AVAILABLE, SURPLUS, NEVER USED, 2 YEAR RADWELL WARRANTY
✓ IN STOCK!
£815.15
Price with VAT:
£978.18
APEX TOOLS
WELLER SOLDERING
WHA3000V
DIGITAL, 700W, HOT AIR STATION FOR OPERATION WITH COMPRESSED AIR
✓ IN STOCK!
£1,229.43
Price with VAT:
£1,475.32
APEX TOOLS
CLECO
47EA43AM3
DISCONTINUED BY MANUFACTURER, NUTRUNNER / RIGHT ANGLE, 47EA SERIES, 3/8 INCH BOLT SIZE, DC BRUSHLESS, LEVER START, MAX TORQUE 43 NM, 685 RPM FREE SPEED, 31.7-6.6 FT LB, 43-9 NM, 17.7 INCH LE ...
✓ IN STOCK!
£804.71
Price with VAT:
£965.65
APEX TOOLS
COOPER TOOLS
Y2K-0S9-V2.9
OPERATOR INTERFACE 68K 110VAC 50HZ
✓ IN STOCK!
£807.55
Price with VAT:
£969.06
APEX TOOLS
CLECO
5RSAUPT-10BQ
SCREW DRIVER, PISTOL GRIP, 5 SERIES, PUSH AND TRIGGER START, SLIDING KNOB REVERSE, TOP AIR INLET, #10 SCREW SIZE, 1100 RPM FREE SPEED, 40-3 IN LB, 4.5-.4 NM, 8.4 INCH LENGTH
✓ IN STOCK!
£578.72
Price with VAT:
£694.46
APEX TOOLS
CLECO
5RSSTP-10BQ
SCREWDRIVER, 5 SERIES, PISTOL GRIP, SLIDING KNOB REVERSE, 1/4 INCH HEX QUICK CHANGE, #10 SCREW SIZE, 1100 RPM FREE SPEED, 40 IN LB, 4.5 NM, 6.4 INCH LENGTH
✓ IN STOCK!
£592.18
Price with VAT:
£710.61
APEX TOOLS
CLECO
861496
NUTRUNNER RIGHT ANGLE HEAD T-4 1/2INCH
✓ IN STOCK!
£594.08
Price with VAT:
£712.90
APEX TOOLS
WELLER SOLDERING
T0053256699
DESOLDERING STATION SET, DIGITAL, 95W, MAINS VOLTAGE: 230V/50HZ - 120V/60HZ, +50 TO +550 DEGREES C, COMPRESSED AIR OR INERT GAS
✓ IN STOCK!
£619.16
Price with VAT:
£742.99
APEX TOOLS
WELLER SOLDERING
WA2000
59235 SOLDERING EQUIPMENT ANALYZER
✓ IN STOCK!
£420.76
Price with VAT:
£504.91
APEX TOOLS
COOPER TOOLS
STM-12
DISCONTINUED BY MANUFACTURER, TIGHTENING MODULE, NUT RUNNER CONTROLLER, 10 AMP, 230 VAC, IP 20, ARCNET
✓ IN STOCK!
£623.73
Price with VAT:
£748.48
APEX TOOLS
TSE 961446PT
DISCONTINUED BY MANUFACTURER, INDUSTRIAL ASSEMBLY TOOL, MODULE TIGHTENING
✓ IN STOCK!
£418.85
Price with VAT:
£502.62
APEX TOOLS
COOPER TOOLS
H10RD12ATC
DISCONTINUED BY MANUFACTURER, NUTRUNNER, AIR LEVER START, STRAIGHT, 1200 RPM
£374.80
Price with VAT:
£449.76
APEX TOOLS
DOTCO
12S2562-77
GRINDER, ERGO, FE, 12000 RPM, GOV, 3/8-24 E
✓ IN STOCK!
£385.56
Price with VAT:
£462.67
APEX TOOLS
CLECO
14E1SA02Q
SCREWDRIVER, 14 SERIES, INLINE, REVERSIBLE, QUICK CHANGE, PUSH-TO-START, #6 SCREW SIZE, 1900 RPM FREE SPEED, 16-3 IN LB, 1.8-0.4 NM, 12.9 INCH LENGTH, 110 V
✓ IN STOCK!
£343.93
Price with VAT:
£412.72
APEX TOOLS
WELLER SOLDERING
DS602
POWER SUPPLY, 110 W, 120 VAC, 60HZ, PORTABLE DESOLDERING STATION
✓ IN STOCK!
£323.95
Price with VAT:
£388.73
APEX TOOLS
WELLER SOLDERING
WAD101
SOLDERING STATION W/SOLDERING IRON/PH60 STAND/SPONGE, 100 WATT, 120V, 122F TO 1022F DIGITAL
✓ IN STOCK!
£453.18
Price with VAT:
£543.82
APEX TOOLS
COOPER TOOLS
TMH960902
DISCONTINUED BY MANUFACTURER, SERVO CONTROL DRIVE, 220-240VAC INPUT, 3PH, DC
✓ IN STOCK!
£305.46
Price with VAT:
£366.55
APEX TOOLS
WELLER SOLDERING
T0051309099
DISCONTINUED BY MANUFACTURER, DESOLDERING IRON, DS80 SERIES, WMD-3 MULTI-PURPOSE STATION, WSP 80 SOLDERING KIT, HAP 1 HOT AIR SOLDERING IRON KIT, A DS 80 DESOLDERING IRON KIT, 80 WATT, ELECT ...
✓ IN STOCK!
£256.00
Price with VAT:
£307.20
APEX TOOLS
COOPER TOOLS
TM34-960901
DISCONTINUED BY MANUFACTURER, SERVO DRIVE CARD, RS232 MALE CONNECTION, RESOLVER CONNECTION: RS232 FEMALE, MOTOR CONNECTION: PCB 7 POSTION CONNECTOR, SUPPLY CONNECTION: PCB 5 POSITION CONNECT ...
✓ IN STOCK!
£124.78
Price with VAT:
£149.74
APEX TOOLS
COOPER TOOLS
73306AA2
DISCONTINUED BY MANUFACTURER, AXIAL PISTON, A2 SERIES, MAXIMUM MOTOR POWER 0.6HP AT 44RPM, 0.45KW, FREE SPEED AT 90, STALL TORQUE 107LBS, 108NM, 53.6:1 GEAR RATIO
✓ IN STOCK!
£108.12
Price with VAT:
£129.75
APEX TOOLS
ARCNET-HUB 1E 3A
DISCONTINUED BY MANUFACTURER, 4 PORT HUB, 24V
✓ IN STOCK!
£56.81
Price with VAT:
£68.17
Repair Yours
Contact Us
APEX TOOLS
WELLER SOLDERING
EC1002S-0
DISCONTINUED BY MANUFACTURER, ELECTRONIC SOLDERING STATION, 60W, 120V, 60HZ
✓ IN STOCK!
£89.84
Price with VAT:
£107.81
Repair Yours
Contact Us
