Product Search

    SEARCH NOW FOR ALL YOUR APEX TOOLS SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Filter Results
    Results 51-100 of 497.
    APEX TOOLS 5RNAL-254BH-3

    APEX TOOLS

    CLECO

    5RNAL-254BH-3

    NUTRUNNER / ANGLE, CLECOMATIC CLUTCH, 5 SERIES, LEVER START, TWIST RING REVERSE, 1/4 INCH BOLT SIZE, 500 RPM FREE SPEED, 75-10 IN LB, 8.5-1.1 NM, 13.9 INCH LENGTH, 1.2 INCH HEAD HEIGHT, 0.5 ...
    ✓ IN STOCK!
    £3,194.18 Price with VAT: £3,833.01 Buy Surplus As Low As £587.98 Price with VAT: £705.58
    £587.98 Price with VAT: £705.58
    Repair Yours £994.12 Price with VAT: £1,192.94
    APEX TOOLS TVP-110-15-U

    APEX TOOLS

    CLECO

    TVP-110-15-U

    DISCONTINUED BY MANUFACTERER, PNEUMATIC QUALIFIER, 110-230 VAC, 50/60HZ, SINGLE PHASE, W/ INTERFACE AND KEYPAD
    ✓ IN STOCK!
    Buy Surplus As Low As £2,198.52 Price with VAT: £2,638.22
    £2,198.52 Price with VAT: £2,638.22
    Repair Yours £1,386.45 Price with VAT: £1,663.74
    APEX TOOLS 34RAA47AX3

    APEX TOOLS

    CLECO

    34RAA47AX3

    PNEUMATIC NUTRUNNER, SERIES 34
    ✓ IN STOCK!
    £3,679.76 Price with VAT: £4,415.71 Buy Surplus As Low As £1,299.10 Price with VAT: £1,558.92
    £1,299.10 Price with VAT: £1,558.92
    Repair Yours £1,078.25 Price with VAT: £1,293.90
    APEX TOOLS S961450-001

    APEX TOOLS

    COOPER TOOLS

    S961450-001

    DISCONTINUED BY MANUFACTURER, INDUSTRIAL PC, CONTROLLER -S, .7AMP, 24VDC, IP65
    ✓ IN STOCK!
    Buy Surplus As Low As £1,343.79 Price with VAT: £1,612.55
    £1,343.79 Price with VAT: £1,612.55
    Repair Yours £1,119.83 Price with VAT: £1,343.79
    APEX TOOLS WFE2S

    APEX TOOLS

    WELLER SOLDERING

    WFE2S

    VOLUME FUME EXTRACTION SYSTEM WITH BUILT-IN TURBINE
    £2,440.48 Price with VAT: £2,928.58 Buy Surplus As Low As £1,464.74 Price with VAT: £1,757.68
    £1,464.74 Price with VAT: £1,757.68
    Repair Yours £1,216.13 Price with VAT: £1,459.36
    APEX TOOLS 960901

    APEX TOOLS

    COOPER TOOLS

    960901

    DISCONTINUED BY MANUFACTURER, SERVO DRIVE, STM34, INPUT VOLTAGE 230VAC, RS-232 COMMUNICATION, RESOLVER FEEDBACK
    ✓ IN STOCK!
    Buy Surplus As Low As £2,081.08 Price with VAT: £2,497.30
    £2,081.08 Price with VAT: £2,497.30
    Repair Yours £1,726.14 Price with VAT: £2,071.37
    APEX TOOLS 183-18-0961-0

    APEX TOOLS

    HK PORTER

    183-18-0961-0

    DISCONTINUED BY MANUFACTURER, DC MOTOR, NAGNETIC
    ✓ IN STOCK!
    Buy Surplus As Low As £1,250.30 Price with VAT: £1,500.35
    £1,250.30 Price with VAT: £1,500.35
    Repair Yours £1,348.60 Price with VAT: £1,618.32
    APEX TOOLS MPRO400GC-P

    APEX TOOLS

    CLECO

    MPRO400GC-P

    DISCONTINUED BY MANUFACTURER, NUTRUNNER CONTROLLER, 18/48 AIRLB, CONTROLS UP TO 16 TOOL, 50/60 HZ, 2A, 115/230 VAC
    ✓ IN STOCK!
    Buy Surplus As Low As £2,005.86 Price with VAT: £2,407.03
    £2,005.86 Price with VAT: £2,407.03
    Repair Yours £1,849.85 Price with VAT: £2,219.82
    APEX TOOLS P34038930300

    APEX TOOLS

    COOPER TOOLS

    P34038930300

    DISCONTINUED BY MANUFACTURER, PROBE DRIVER, 18V
    ✓ IN STOCK!
    Buy Surplus As Low As £2,139.10 Price with VAT: £2,566.92
    £2,139.10 Price with VAT: £2,566.92
    Repair Yours £1,864.22 Price with VAT: £2,237.06
    APEX TOOLS 74124AA7

    APEX TOOLS

    COOPER TOOLS

    74124AA7

    GEAR MOTOR, 7.7 HP, 3 IN SHAFT
    ✓ IN STOCK!
    Buy Surplus As Low As £2,207.55 Price with VAT: £2,649.06
    £2,207.55 Price with VAT: £2,649.06
    Repair Yours £1,923.88 Price with VAT: £2,308.66
    APEX TOOLS TME-111-15-U

    APEX TOOLS

    CLECO

    TME-111-15-U

    DISCONTINUED BY MANUFACTURER,CONTROLLER AIR FOR ELECTRIC TOOL, 115 VAC, 50/60 HZ, 1 PHASE, 15 AMP, CLECO
    ✓ IN STOCK!
    Buy Surplus As Low As £2,883.13 Price with VAT: £3,459.76
    £2,883.13 Price with VAT: £3,459.76
    Repair Yours £2,041.17 Price with VAT: £2,449.40
    APEX TOOLS 24RAS13AM3

    APEX TOOLS

    CLECO

    24RAS13AM3

    DISCONTINUED BY MANUFACTURER, NUTRUNNER / ANGLE, SERIES 24, CLUTCH SHUT OFF, LEVER START, COLLAR REVERSE, 7.0-14.0 TORQUE RANGE, 700 -1/MIN FREE SPEED, 3/8 INCH SQUARE DRIVE
    ✓ IN STOCK!
    Buy Surplus As Low As £2,343.60 Price with VAT: £2,812.32
    £2,343.60 Price with VAT: £2,812.32
    Repair Yours £2,042.45 Price with VAT: £2,450.94
    APEX TOOLS 24RAA19AM3

    APEX TOOLS

    CLECO

    24RAA19AM3

    NUTRUNNER / ANGLE, SERIES 24, CLUTCH SHUT OFF, LEVER START, COLLAR REVERSE, 7.0-14.0 TORQUE RANGE, 700 -1/MIN FREE SPEED, 3/8 INCH SQUARE DRIVE OUTPUT, 15 INCH LENGTH, 0.52 INCH SIDE TO CENT ...
    ✓ IN STOCK!
    £4,771.22 Price with VAT: £5,725.46 Buy Surplus As Low As £1,693.93 Price with VAT: £2,032.71
    £1,693.93 Price with VAT: £2,032.71
    Repair Yours £1,604.01 Price with VAT: £1,924.81
    APEX TOOLS 933872

    APEX TOOLS

    COOPER TOOLS

    933872

    APEX TOOLS,933872, MOTOR,NUTRUNNER MOTOR,BRUSHLESS,320V,2.8A, 5000RPM, REVERSIBLE,29/12PIN PLUGS,5000 RPM,300 V,2.8AMP 2BB SERIES,
    ✓ IN STOCK!
    £5,306.57 Price with VAT: £6,367.88 Buy Surplus As Low As £2,836.95 Price with VAT: £3,404.34
    £2,836.95 Price with VAT: £3,404.34
    Repair Yours £2,202.53 Price with VAT: £2,643.04
    APEX TOOLS 17EP06Q

    APEX TOOLS

    CLECO

    17EP06Q

    NUTRUNNER, 17EP SERIES, PISTOL GRIP, 2600 RPM FREE SPEED, 4.4-1.5 FT LB, 6-2 NM, #10 BOLT SIZE, 7 INCH LENGTH, 0.84 INCH SIDE TO CENTER
    ✓ IN STOCK!
    £6,857.61 Price with VAT: £8,229.13 Buy Surplus As Low As £2,159.88 Price with VAT: £2,591.86
    £2,159.88 Price with VAT: £2,591.86
    Repair Yours £2,134.29 Price with VAT: £2,561.15
    APEX TOOLS TME-211-15-U

    APEX TOOLS

    CLECO

    TME-211-15-U

    DISCONTINUED BY MANUFACTURER, TIGHTENING MANAGER CONTROLLER, 2 CHANNEL, 115 VAC, 1 PHASE, 15 AMP, 50/60 HZ, ETHERNET, 16.5 INCH WIDTH, 17.5 INCH HEIGHT, 12.3 INCH DEPTH
    ✓ IN STOCK!
    Buy Surplus As Low As £2,268.57 Price with VAT: £2,722.28
    £2,268.57 Price with VAT: £2,722.28
    Repair Yours £2,601.88 Price with VAT: £3,122.26
    APEX TOOLS 48EAE41AM3

    APEX TOOLS

    CLECO

    48EAE41AM3

    ELECTRIC NUTRUNNER, 48 SERIES, RIGHT ANGLE, TRANSDUCER CONTROL, 41NM, 6.6-30.3FT/LB TORQUE, 17.3IN LENGTH, 1090RPM
    ✓ IN STOCK!
    £17,652.23 Price with VAT: £21,182.67 Buy Surplus As Low As £6,610.72 Price with VAT: £7,932.86
    £6,610.72 Price with VAT: £7,932.86
    Repair Yours £5,491.04 Price with VAT: £6,589.25
    APEX TOOLS 34061

    APEX TOOLS

    ALLEN TOOLS

    34061

    SKT IMP 3/8DR 6PT DP 9/16
    ✓ IN STOCK!
    £9.71 Price with VAT: £11.65 Buy Surplus As Low As £5.70 Price with VAT: £6.84
    £5.70 Price with VAT: £6.84
    APEX TOOLS 82248

    APEX TOOLS

    GEARWRENCH

    82248

    48" EXTENDABLE PRY BAR, 48" EXTENDABLE PRY BAR HAND TOOLS UNSPSC=27110000 UNSPSC=27110000
    ✓ IN STOCK!
    £148.85 Price with VAT: £178.62 Buy Surplus As Low As £85.51 Price with VAT: £102.61
    £85.51 Price with VAT: £102.61
    APEX TOOLS 7874B

    APEX TOOLS

    WELLER SOLDERING

    7874B

    (PRICE/EA) ESD SAFE DESOLDERING PUMP; DESOLDER TOOL TYPE:PUMP; TIP / NOZZLE LENGTH:-; TIP / NOZZLE O.D.:-; PRODUCT RANGE:-; PLUG TYPE:- ROHS COMPLIANT: NO, (MOQ=1, PKG QTY=1)
    ✓ IN STOCK!
    £35.09 Price with VAT: £42.11 Buy Surplus As Low As £24.40 Price with VAT: £29.29
    £24.40 Price with VAT: £29.29
    APEX TOOLS PTM7

    APEX TOOLS

    WELLER SOLDERING

    PTM7

    WELLER 700DEG 1/32" L SD/WTCPS R N 47335 TIP, 10 PER BOX, 700DEG 1/32" L SD/WTCPS R N 47335 TIP, 10 PER BOX WELDING SUPPLIES UPC=37103473356
    ✓ IN STOCK!
    £5.60 Price with VAT: £6.72 Buy Surplus As Low As £1.49 Price with VAT: £1.79
    £1.49 Price with VAT: £1.79
    APEX TOOLS 3685D

    APEX TOOLS

    JACOBS CHUCK

    3685D

    (PRICE/EA) MODEL A KEYLEASH / JACOBS
    ✓ IN STOCK!
    Buy Surplus As Low As £4.55 Price with VAT: £5.46
    £4.55 Price with VAT: £5.46
    APEX TOOLS T7605701

    APEX TOOLS

    CAMPBELL CHAIN

    T7605701

    (PRICE/EA) SNAP,SPR,RD SWL,#222,3/4,TAGGED / CAMPBELL
    ✓ IN STOCK!
    £11.94 Price with VAT: £14.33 Buy Surplus As Low As £5.41 Price with VAT: £6.50
    £5.41 Price with VAT: £6.50
    APEX TOOLS 7776CVN

    APEX TOOLS

    CRESCENT TOOLS

    7776CVN

    CRESCENT 6 1/2IN LONG NEEDLE NOSE SOLID JOINT PLIERS, 6EA/CT, 6 1/2IN LONG NEEDLE NOSE SOLID JOINT PLIERS, 6EA/CT HAND TOOLS UNSPSC=27112100 UPC=37103213372
    ✓ IN STOCK!
    £19.41 Price with VAT: £23.29 Buy Surplus As Low As £13.44 Price with VAT: £16.13
    £13.44 Price with VAT: £16.13
    APEX TOOLS 440-1X

    APEX TOOLS

    440-1X

    27522 #1 PHILLIPS INSERT, 19BITS/BAG HAND TOOLS, 5RDG9, 071- UNSPSC=27112800 UPC=697099275220
    ✓ IN STOCK!
    £1.19 Price with VAT: £1.43 Buy Surplus As Low As £0.26 Price with VAT: £0.31
    £0.26 Price with VAT: £0.31
    APEX TOOLS C2920MME150MN

    APEX TOOLS

    LUFKIN

    C2920MME150MN

    ATLAS CHROME CLAD, HEAVY-DUTY OIL GAUGING TAPE, 150 MM BOB CUT, 13MM (1/2 INCH) WIDTH, TAPE, 20 M (66 FT), OIL GAUGE CHROME, (PRICE/EA)
    ✓ IN STOCK!
    £355.36 Price with VAT: £426.43 Buy Surplus As Low As £276.56 Price with VAT: £331.87
    £276.56 Price with VAT: £331.87
    APEX TOOLS 34063

    APEX TOOLS

    ALLEN TOOLS

    34063

    SKT IMP 3/8DR 6PT DP 11/16
    ✓ IN STOCK!
    £11.20 Price with VAT: £13.44 Buy Surplus As Low As £6.65 Price with VAT: £7.98
    £6.65 Price with VAT: £7.98
    APEX TOOLS T0054443599

    APEX TOOLS

    WELLER SOLDERING

    T0054443599

    (PRICE/EA) TIP / NOZZLE WIDTH:0.25MM; TIP / NOZZLE STYLE:CONICAL; FOR USE WITH:-; PRODUCT RANGE:- ROHS COMPLIANT: YES
    ✓ IN STOCK!
    £10.66 Price with VAT: £12.79 Buy Surplus As Low As £8.38 Price with VAT: £10.05
    £8.38 Price with VAT: £10.05
    APEX TOOLS JCM6628Z

    APEX TOOLS

    JACOBS CHUCK

    JCM6628Z

    DRILL CHUCK: 1/4" CAPACITY, THREADED MOUNT, 3/8-24 KEYED, K1M KEY, 1.12" SLEEVE DIA (MOQ=1, PKG QTY=1)
    ✓ IN STOCK!
    £326.02 Price with VAT: £391.22 Buy Surplus As Low As £195.61 Price with VAT: £234.73
    £195.61 Price with VAT: £234.73
    APEX TOOLS WXA2N

    APEX TOOLS

    WELLER SOLDERING

    WXA2N

    (PRICE/EA) DUAL CONTROL UNIT, 200W, 120V; SUPPLY VOLTAGE VAC:120V; POWER RATING:200W; FOR USE WITH:WELLER WXHAP200 HOT AIR PENCIL; PRODUCT RANGE:WX SERIES; PLUG TYPE:- ROHS COMPLIANT: YES
    ✓ IN STOCK!
    £1,871.14 Price with VAT: £2,245.37 Buy Surplus As Low As £809.26 Price with VAT: £971.12
    £809.26 Price with VAT: £971.12
    APEX TOOLS 11-715

    APEX TOOLS

    ARMSTRONG TOOL

    11-715

    3/8" DRIVE HEX DRIVER 3/8" HEX STANDARD BIT CH, 5 PER BOX HAND TOOLS UNSPSC=27111704 UPC=781412117158
    ✓ IN STOCK!
    Buy Surplus As Low As £8.44 Price with VAT: £10.13
    £8.44 Price with VAT: £10.13
    APEX TOOLS 8200

    APEX TOOLS

    WELLER SOLDERING

    8200

    WELLER 47584 SOLDERING GUN, 3 PER CARTON, 47584 SOLDERING GUN, 3 PER CARTON WELDING SUPPLIES UNSPSC=23271603 UPC=37103475848
    ✓ IN STOCK!
    Buy Surplus As Low As £46.81 Price with VAT: £56.17
    £46.81 Price with VAT: £56.17
    APEX TOOLS ETS

    APEX TOOLS

    WELLER SOLDERING

    ETS

    WELLER 47805 1/64" TIP -LONG CONICAL, 10 PER BOX, 47805 1/64" TIP -LONG CONICAL, 10 PER BOX POWER TOOLS UNSPSC=23271603 UPC=37103478054
    ✓ IN STOCK!
    £8.48 Price with VAT: £10.18 Buy Surplus As Low As £6.45 Price with VAT: £7.74
    £6.45 Price with VAT: £7.74
    APEX TOOLS 0012NE

    APEX TOOLS

    HK PORTER

    0012NE

    H.K. PORTER 00005 JAWS FOR 0090MNE CLIPPER CUT, 00005 JAWS FOR 0090MNE CLIPPER CUT HAND TOOLS UNSPSC=27110000 UPC=37103904805
    ✓ IN STOCK!
    Buy Surplus As Low As £55.18 Price with VAT: £66.21
    £55.18 Price with VAT: £66.21
    APEX TOOLS 5427CVN

    APEX TOOLS

    CRESCENT TOOLS

    5427CVN

    CRESCENT 7IN HEAVY DUTY DIAGONAL CUTTING SOLID JOINT PLIERS, 6EA/CT, 7IN HEAVY DUTY DIAGONAL CUTTING SOLID JOINT PLIERS, 6EA/CT HAND TOOLS UNSPSC=27112100 UPC=37103212801
    ✓ IN STOCK!
    £25.02 Price with VAT: £30.03 Buy Surplus As Low As £9.71 Price with VAT: £11.65
    £9.71 Price with VAT: £11.65
    APEX TOOLS 8886CVN

    APEX TOOLS

    CRESCENT TOOLS

    8886CVN

    CRESCENT 6IN CURVED NEEDLE NOSE SOLID JOINT PLIERS, 6EA/CT, EA
    £23.89 Price with VAT: £28.67 Buy Surplus As Low As £16.42 Price with VAT: £19.71
    £16.42 Price with VAT: £19.71
    APEX TOOLS 80050H

    APEX TOOLS

    GEARWRENCH

    80050H

    6 PIECE PHILLIPS/SLOTTED DUAL MATERIAL SCREWDRIVER SET
    ✓ IN STOCK!
    £51.86 Price with VAT: £62.24 Buy Surplus As Low As £31.12 Price with VAT: £37.34
    £31.12 Price with VAT: £37.34
    APEX TOOLS 45-0948

    APEX TOOLS

    DOTCO

    45-0948

    DIE GRINDER HOSE USE WITH 1/4" TUBING (MOQ=1, PKG QTY=1)
    ✓ IN STOCK!
    £76.89 Price with VAT: £92.27 Buy Surplus As Low As £50.77 Price with VAT: £60.92
    £50.77 Price with VAT: £60.92
    APEX TOOLS 09749

    APEX TOOLS

    JACOBS CHUCK

    09749

    DISCONTINUED BY MANUFACTURER, RUBBER FLEX COLLET MODEL J-440, REPLACED BY 9749
    ✓ IN STOCK!
    Buy Surplus As Low As £13.83 Price with VAT: £16.60
    £13.83 Price with VAT: £16.60
    APEX TOOLS 20N

    APEX TOOLS

    JACOBS CHUCK

    20N

    DRILL CHUCK, 3/8-1INCH, 5JT MOUNT
    ✓ IN STOCK!
    £684.27 Price with VAT: £821.13 Buy Surplus As Low As £50.86 Price with VAT: £61.04
    £50.86 Price with VAT: £61.04
    APEX TOOLS 86-681

    APEX TOOLS

    ARMSTRONG TOOL

    86-681

    DISPO CAST ALLOY CUT-OFF BLADE, 1/8 X 3/4
    ✓ IN STOCK!
    £91.38 Price with VAT: £109.65 Buy Surplus As Low As £37.25 Price with VAT: £44.70
    £37.25 Price with VAT: £44.70
    APEX TOOLS 33-036

    APEX TOOLS

    ARMSTRONG TOOL

    33-036

    STRIKING WRENCH, 1-1/8IN, 12-PT OFFSET
    ✓ IN STOCK!
    Buy Surplus As Low As £31.83 Price with VAT: £38.19
    £31.83 Price with VAT: £38.19
    APEX TOOLS 80437

    APEX TOOLS

    GEARWRENCH

    80437

    3/8" DRIVE LONG BALL END HEX BIT SAE SOCKET 7/32"
    ✓ IN STOCK!
    £8.79 Price with VAT: £10.54 Buy Surplus As Low As £7.53 Price with VAT: £9.04
    £7.53 Price with VAT: £9.04
    APEX TOOLS 12-721

    APEX TOOLS

    ARMSTRONG TOOL

    12-721

    DRIVE HEX BIT SOCKET, 1/2 INCH DRIVE SIZE, 3/4 INCH FASTENER SIZE
    ✓ IN STOCK!
    Buy Surplus As Low As £10.27 Price with VAT: £12.32
    £10.27 Price with VAT: £12.32
    APEX TOOLS 38-006

    APEX TOOLS

    ARMSTRONG TOOL

    38-006

    SOCKET 3/8DR 6PT 6MM
    ✓ IN STOCK!
    Buy Surplus As Low As £4.66 Price with VAT: £5.59
    £4.66 Price with VAT: £5.59
    APEX TOOLS 84879

    APEX TOOLS

    GEARWRENCH

    84879

    3/4 DRIVE 6 POINT DEEP IMPACT SOCKET, 1-3/4"
    ✓ IN STOCK!
    £38.60 Price with VAT: £46.32 Buy Surplus As Low As £26.13 Price with VAT: £31.36
    £26.13 Price with VAT: £31.36
    APEX TOOLS 85299

    APEX TOOLS

    GEARWRENCH

    85299

    (PRICE/ST) 5 PC. METRIC S-SHAPE REVERSIBLE RATCHETING WRENCH SET
    ✓ IN STOCK!
    £207.78 Price with VAT: £249.34 Buy Surplus As Low As £132.26 Price with VAT: £158.71
    £132.26 Price with VAT: £158.71
    APEX TOOLS 6223

    APEX TOOLS

    JACOBS CHUCK

    6223

    DRILL CHUCK: 1/8 TO 5/8" CAPACITY, TAPERED MOUNT, JT3 KEYED, K3 KEY, 2.3" SLEEVE DIA (MOQ=1, PKG QTY=1)
    ✓ IN STOCK!
    £301.38 Price with VAT: £361.66 Buy Surplus As Low As £179.17 Price with VAT: £215.01
    £179.17 Price with VAT: £215.01
    APEX TOOLS 7417

    APEX TOOLS

    JACOBS CHUCK

    7417

    U3 JAW/NUT
    ✓ IN STOCK!
    £77.64 Price with VAT: £93.17 Buy Surplus As Low As £41.06 Price with VAT: £49.27
    £41.06 Price with VAT: £49.27
    APEX TOOLS 7424

    APEX TOOLS

    7424

    29829 SCKT 3/4 FMALE SQ
    ✓ IN STOCK!
    £65.73 Price with VAT: £78.87 Buy Surplus As Low As £39.44 Price with VAT: £47.33
    £39.44 Price with VAT: £47.33
    Previous Next
    1 2 3 4 5 6 7 8 9 10