SEARCH NOW FOR ALL YOUR DAYTON SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Motors/GearBox/Clutch / Gear Motor
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
GRAINGER
DAYTON
4ZJ48
DC GEAR MOTOR, 24VAC, 5.45A, 1/8HP, 120RPM, 15:1 RATIO, MAX TORQUE: 60 IN-LB, ENCLOSURE: TENV
£261.38
Price with VAT:
£313.66
GRAINGER
DAYTON
52JE28
AC GEARMOTOR 115 NAMEPLATE RPM 50 MAX. TORQUE 4.2 IN.-LB. ENCLOSURE OPEN
£52.90
Price with VAT:
£63.48
GRAINGER
DAYTON
1LPX4
AC GEARMOTOR, 115/230V, RPM 15 MAX, TORQUE 500.0 IN LB, SINGLE SHAFT, ALL ANGLE, 3/4IN SHAFT DIA, 1.38IN SHAFT LENGTH
£423.18
Price with VAT:
£507.82
GRAINGER
DAYTON
4Z279
DISCONTINUED BY MANUFACTURER, GEAR MOTOR, 1 PHASE, 20:1 RATIO, SINGLE LEFT SHAFT, NO REPLACEMENT
£453.41
Price with VAT:
£544.09
GRAINGER
DAYTON
6Z076
GEAR MOTOR, 0.30/0.35 AMPS, 115 VAC, 1 HP, 50/60 HZ, 8.8 RPM, 1 PH, 76 LBS TORQUE
£308.23
Price with VAT:
£369.88
GRAINGER
DAYTON
2H563
GEAR MOTOR, PARALLEL, TENV, 83.0 IN-LB MAX TORQUE, SINGLE SHAFT, 25:1 RATIO, 71 RPM, 1.08 AMP, 90 VDC, DIE CAST ALUMINUM
£412.60
Price with VAT:
£495.13
GRAINGER
DAYTON
1LNF8
AC GEARMOTOR, 0.02 HP, 150 IN-LB TORQUE, 1-PHASE, 115 VAC, 50/60 HZ, 1.3 A, 6 RPM, 3/8" X 1" PARALLEL SHAFT, CW ROTATION, 529:1 GEAR RATIO, SPUR GEAR TYPE
£92.43
Price with VAT:
£110.92
Repair Yours
Contact Us
GRAINGER
DAYTON
6K383A
DISCONTINUED BY MANUFACTURER, GEAR MOTOR, SPLIT-PHASE TYPE, 320 IN-LB, PARALLEL SINGLE SHAFT, CW/CCW ROTATION, 19:1 ROTATION,1/2 HP, 91 RPM, 7.8 AMP, SINGLE PHASE, 115 VAC, 60 HZ, GEAR MATER ...
£702.79
Price with VAT:
£843.35
GRAINGER
DAYTON
6Z400
GEAR MOTOR, HELICAL, TEFC, SINGLE SHAFT, PARALLEL. CW/CCW, 210:1 RATIO, 0-974 IN-LB, 325 LB OVERHUNG LOAD, 1.4 HP, 8.5 RPM, 4 AMP, SPLIT-PHASE, 115 VAC, 60 HZ, ALL ANGLE MOUNT, DIE-CAT ALUMI ...
£544.26
Price with VAT:
£653.11
GRAINGER
DAYTON
3M329A
GEAR MOTOR, TEFC, 126.0 IN-LB TORQUE, SINGLE PARALLEL SHAFT, 1/15 HP, 30 RPM, SINGLE PHASE, 115 VAC, 60 HZ, DIE-CAST ALUMINUM HOUSING, HARDENED STEEL GEAR, 11.2 LBS.
£300.72
Price with VAT:
£360.86
GRAINGER
DAYTON
4Z530
DISCONTINUED BY MANUFACTURER, 90 VDC, 267:1 RATIO, SINGLE SHAFT, 6.5 RPM, 0.75 AMP, INPUT HP 1/15
£498.75
Price with VAT:
£598.50
GRAINGER
DAYTON
1L527
GEARMOTOR, AC, 230 VAC, 96:1, 16 - 30 RPM, 50/60 HZ, 1/20 HP
£259.96
Price with VAT:
£311.95
GRAINGER
DAYTON
1L527B
AC GEARMOTOR, 230 VAC, MAX TORQUE 100 IN-LB, 17 RPM, 50/60 HZ, INPUT 1/20 HP, RATIO 96:1, 0.3 AMP, MAX AMBIENT TEMP 40 DEGREES C
£270.95
Price with VAT:
£325.14
GRAINGER
DAYTON
52JE24
AC GEARMOTOR: 16 RPM NAMEPLATE RPM, 13 IN-LB MAX. TORQUE, SINGLE, CW, ALL ANGLE.
£60.45
Price with VAT:
£72.55
Repair Yours
Contact Us
GRAINGER
DAYTON
1LPN9A
DISCONTINUED BY MANUFACTURER, GEAR MOTOR, 1/4 HP, 115 V, 3.9 A, 120 RPM, 100 IN-LB TORQUE, 11.3 NM, 60 HZ, 1 PHASE, 14:1 RATIO
£281.55
Price with VAT:
£337.86
GRAINGER
DAYTON
4Z530A
DISCONTINUED BY MANUFACTURER, GEARMOTOR, 267:1 GEAR RATIO, 1/15 HP, 3/4 IN, 90 VOLTS DC, 0.75 AMPS
£314.89
Price with VAT:
£377.87
GRAINGER
DAYTON
4ZJ45
DC GEARMOTOR, 24 VDC, 8.3 RPM NAMEPLATE RPM, 310 IN-LB MAX. TORQUE, CW/CCW, ALL ANGLE, 1/8 HP, 2.5 AMP, 216:1 RATIO
£504.04
Price with VAT:
£604.85
GRAINGER
DAYTON
6K506A
AC GEAR MOTOR, 115 VAC, 1 PHASE, 215 IN-LB TORQUE, 137 RPM, 60 HERTZ, 1/2 HP, 7.8 AMPS, 325 LB OVERHUNG LOAD, 13:1 RATIO, 3/4 INCH SHAFT DIAMETER, DIE CAST ALUMINUM HOUSING, 40 CELSIUS MAX A ...
£673.49
Price with VAT:
£808.19
GRAINGER
DAYTON
6K332B
DISCONTINUED BY MANUFACTURER, AC GEAR MOTOR, 115 VOLTS, 1/6 HORSEPOWER, 4.5 AMPS, 60 HERTZ, 1 PHASE, 19.1:1 RATIO, 100 TORQUE
£286.94
Price with VAT:
£344.33
GRAINGER
DAYTON
6A193A
MOTOR, PERMANENT MAGNET DC GEARMOTOR, 5.4 RPM, 90 VDC, SHAFT DIAMETER (5/8 INCH), SHAFT LENGTH (1-1/2 INCH), 1/20 HP, GEAR RATIO (336:1), .4 AMP
£213.66
Price with VAT:
£256.40
GRAINGER
DAYTON
1LPW2A
DAYTON DC GEARMOTOR: PARALLEL, 90V DC, TENV, 21 RPM, 50 IN-LB MAX TORQUE, 1/30 HP INPUT HORSEPOWER
£241.03
Price with VAT:
£289.24
GRAINGER
DAYTON
3XA90A
AC GEAR MOTOR, RIGHT ANGLE, SINGLE OUTPUT SHAFT, PSC, TEFC, 55 RPM, 130 IN-LB
£481.39
Price with VAT:
£577.67
GRAINGER
DAYTON
52JD96
AC GEARMOTOR, PARALLEL, SINGLE OUTPUT SHAFT, OUTPUT SHAFT DIAMETER 3/8 INCH, 230 VAC, SHADED POLE, OPEN, 5 RPM, 72 IN-LB MAX TORQUE, GEAR RATIO 529.2:1
£100.50
Price with VAT:
£120.60
Repair Yours
Contact Us
GRAINGER
DAYTON
52JE60
GEARMOTOR, PERMANENT MAGNET DC, PARALLEL SHAFT ORIENTATION, 45 / 55 RPM, 1.4 AMP, 24 V, 78.6:1 RATIO, 28 IN-LB, SINTERED BRONZE SLEEVE BEARING, DIE CAST ZINC / UNPAINTED
£58.19
Price with VAT:
£69.83
Repair Yours
Contact Us
GRAINGER
DAYTON
1XFY9
DISCONTINUED BY MANUFACTURER, AC GEARMOTOR, RIGHT ANGLE, SINGLE OUTPUT SHAFT, PSC, TEFC, 43 RPM, 77 IN-LB MAX TORQUE, 2 A
£748.25
Price with VAT:
£897.90
GRAINGER
DAYTON
4CVU7
AC GEARMOTOR, SINGLE OUTPUT, RIGHT ANGLE, 3-PHASE, 30 RPM
£1,107.08
Price with VAT:
£1,328.50
GRAINGER
DAYTON
2Z795D
DISCONTINUED BY MANUFACTURER, GEARMOTOR, SINGLE PHASE, 1/2 HP, 115 VAC, 60 HZ, 8.3 AMP, 60 RPM, 400 IN-LB TORQUE
£876.54
Price with VAT:
£1,051.85
GRAINGER
DAYTON
6Z821A
GEARMOTOR, SINGLE PHASE, 115/230 VAC, 2.1/1.1 AMP, 19:1 RATIO, 50/60 HZ, 93 RPM, 100 IN-LB TORQUE, 0.167 HP
£540.01
Price with VAT:
£648.02
GRAINGER
DAYTON
1LPV4
GEAR MOTOR, DC, PARALLEL, 12V DC, TENV, 39 RPM, 26 IN-LB MAX TORQUE, 1/30 HP INPUT HORSEPOWER
£196.48
Price with VAT:
£235.77
GRAINGER
DAYTON
52JE33
AC GEAR MOTOR / PARALLEL SHAFT, SINGLE OUTPUT SHAFT, PSC, OPEN, RATIO / 100:1, 7.5 IN-LB, 0.1 HP, 30 RPM, 115 VAC, 50/60 HZ
£68.77
Price with VAT:
£82.52
GRAINGER
DAYTON
52JE40
AC GEARMOTOR, 7 RPM, 18 IN-LB MAX TORQUE, 115 VAC, 50/60 HZ, SINGLE-PHRASE, 0.35 AMP, 1/4 INCH OUTPUT SHAFT DIAMETER, HORIZONTAL MOUNT
✓ IN STOCK!
£59.99
Price with VAT:
£71.98
Repair Yours
Contact Us
GRAINGER
DAYTON
1LPZ5
GEARMOTOR, AC/DC, 55 RPM, 39 IN-LB, 115 VAC/DC, 50/60 HZ, SHAFT ORIENTATION: RIGHT ANGLE, OUTPUT LOCATION: LEFT HAND
£315.88
Price with VAT:
£379.05
GRAINGER
DAYTON
1L535
AC GEARMOTOR, RIGHT ANGLE, DUAL OUTPUT SHAFT, 54 RPM, 1.3/0.70 AMP, 115/230 V, 50/60 HZ, 45 IN-LB
£650.65
Price with VAT:
£780.77
GRAINGER
DAYTON
4Z015
SPEED REDUCER, C-FACE, 56C, 60:1, 1750 RPM
£1,300.54
Price with VAT:
£1,560.64
GRAINGER
DAYTON
1XFZ2
DISCONTINUED BY MANUFACTURER, RIGHT ANGLE GEAR MOTOR, 1/8 HP, 86 RPM, 20:1 RATIO, 115V, 60 HZ, 1 PHASE, 2 AMP
£408.07
Price with VAT:
£489.68
GRAINGER
DAYTON
4Z135
DISCONTINUED BY MANUFACTURER, GEARMOTOR, 180 RPM, 90 VDC, 10:1 RATIO, 1/8 HP, TENV ENCLOSURE
£462.46
Price with VAT:
£554.95
GRAINGER
DAYTON
2Z806C
DISCONTINUED BY MANUFACTURER, GEAR MOTOR, SHADED POLE, 6RPM, 115V
£47.96
Price with VAT:
£57.55
GRAINGER
DAYTON
4Z383
GEAR MOTOR, PARALLEL, TENV, 58:1 RATIO, 220 LB-IN TORQUE MAX, 31 RPM, 1.41 AMP, 90 VDC, DIE CAST ALUMINUM
£356.66
Price with VAT:
£427.99
GRAINGER
DAYTON
6Z907
DISCONTINUED BY MANUFACTURER, GEARMOTOR, 1/85 HP, 6 RPM, 546:1 RATIO, 115 VAC, 50/60 HZ
£99.75
Price with VAT:
£119.70
GRAINGER
DAYTON
3M104
DISCONTINUED BY MANUFACTURER, GEAR MOTOR, 6.3 MAX TORQUE, 115 VAC, 60 HZ, 6 RPM
£66.02
Price with VAT:
£79.22
Repair Yours
Contact Us
GRAINGER
DAYTON
2Z841
GEARMOTOR AC 100RPM 115V 60HZ 1/15HP 17:1RATIO
£224.47
Price with VAT:
£269.36
GRAINGER
DAYTON
2Z851
GEARMOTOR 157RPM 1/3HP RATIO11:1 208-220/440AC
£544.09
Price with VAT:
£652.91
GRAINGER
DAYTON
4Z537
GEAR MOTOR, 1/30 HP, 32 RPM, 90 VDC, 98:1 RATIO, 43 LB/IN
£440.10
Price with VAT:
£528.12
GRAINGER
DAYTON
4Z727
GEAR MOTOR 37:1RATIO 45RPM 1/12HP 90VDC 56LB/IN
£203.76
Price with VAT:
£244.51
GRAINGER
DAYTON
6A193
DC GEARMOTOR 90VDC, NAMEPLATE RPM: 5.4 RPM, MAX. TORQUE: 227.0 IN-LB, ENCLOSURE: TENV
£226.75
Price with VAT:
£272.10
GRAINGER
DAYTON
6A196
GEAR MOTOR, 154 RPM, 1/20 HP, 115 VAC, 60 HZ, 20 IN-LBS, 1/2 INCH SHAFT
£192.20
Price with VAT:
£230.64
