Product Search

    SEARCH NOW FOR ALL YOUR DREMEL SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 51-100 of 182.
    DREMEL 403-02

    DREMEL

    403-02

    WHEEL BRUSH: 3/4" WHEEL DIA, STRAIGHT 3/4" HOLE, NYLON, 15,000 RPM (MOQ=2, PKG QTY=2)
    £10.38 Price with VAT: £12.46 Buy Surplus As Low As £6.23 Price with VAT: £7.48
    £6.23 Price with VAT: £7.48
    DREMEL 404-02

    DREMEL

    404-02

    1/2" DIAM 1/8" SHANK NYLON FILL CUP BRUSH CRIMPED WIRE, 15,000 MAX RPM (MOQ=2, PKG QTY=2)
    £10.38 Price with VAT: £12.46 Buy Surplus As Low As £6.23 Price with VAT: £7.48
    £6.23 Price with VAT: £7.48
    DREMEL 9924

    DREMEL

    9924

    CARBIDE ETCHER & ENGRAVER REPLACEMENT CARBIDE POINT
    £11.12 Price with VAT: £13.35 Buy Surplus As Low As £3.37 Price with VAT: £4.05
    £3.37 Price with VAT: £4.05
    DREMEL 443-02

    DREMEL

    443-02

    1/8" DIAM STEEL FLAT FACED END BRUSH 1/8" SHANK DIAM, 15,000 MAX RPM (MOQ=2, PKG QTY=2)
    £11.12 Price with VAT: £13.35 Buy Surplus As Low As £6.67 Price with VAT: £8.01
    £6.67 Price with VAT: £8.01
    DREMEL 454

    DREMEL

    454

    3/16" GRINDING WHEEL F/CHAIN SAW SHARPENER #
    £11.87 Price with VAT: £14.24 Buy Surplus As Low As £7.12 Price with VAT: £8.54
    £7.12 Price with VAT: £8.54
    DREMEL EZ472SA

    DREMEL

    EZ472SA

    BRUSH: USE WITH EZ402 OR 402 MANDRELS USE WITH EZ402 OR 402 MANDRELS (MOQ=1, PKG QTY=1)
    £11.87 Price with VAT: £14.24 Buy Surplus As Low As £7.12 Price with VAT: £8.54
    £7.12 Price with VAT: £8.54
    DREMEL EZ473SA

    DREMEL

    EZ473SA

    BRUSH: USE WITH EZ402 OR 402 MANDRELS USE WITH EZ402 OR 402 MANDRELS (MOQ=1, PKG QTY=1)
    £11.87 Price with VAT: £14.24 Buy Surplus As Low As £7.12 Price with VAT: £8.54
    £7.12 Price with VAT: £8.54
    DREMEL 125

    DREMEL

    125

    ABRASIVE BUR: CONE 1/8" SHANK (MOQ=2, PKG QTY=2)
    ✓ IN STOCK!
    £12.61 Price with VAT: £15.13 Buy Surplus As Low As £8.19 Price with VAT: £9.83
    £8.19 Price with VAT: £9.83
    DREMEL 511E

    DREMEL

    511E

    ABRASIVE BUFF: USE WITH DREMEL ROTARY TOOL (MOQ=1, PKG QTY=2)
    £12.61 Price with VAT: £15.13 Buy Surplus As Low As £8.16 Price with VAT: £9.79
    £8.16 Price with VAT: £9.79
    DREMEL 532-02

    DREMEL

    532-02

    END BRUSHES: 1/8" DIA, STAINLESS STEEL, FLAT FACED WIRE 3 MM SHANK DIA, 15,000 MAX RPM (MOQ=1, PKG QTY=2)
    £12.61 Price with VAT: £15.13 Buy Surplus As Low As £8.16 Price with VAT: £9.79
    £8.16 Price with VAT: £9.79
    DREMEL 536-02

    DREMEL

    536-02

    END BRUSHES: 1/2" DIA, BRASS, FLAT FACED WIRE 3 MM SHANK DIA, 15,000 MAX RPM (MOQ=1, PKG QTY=2)
    £12.61 Price with VAT: £15.13 Buy Surplus As Low As £8.16 Price with VAT: £9.79
    £8.16 Price with VAT: £9.79
    DREMEL 756-01

    DREMEL

    756-01

    MINIMITE 4.8V BATTERY CHARGER (USE W/ 750-02)
    £12.61 Price with VAT: £15.13 Buy Surplus As Low As £8.16 Price with VAT: £9.79
    £8.16 Price with VAT: £9.79
    DREMEL BE006

    DREMEL

    BE006

    BEARING ENLARGER 3/4"
    £12.61 Price with VAT: £15.13 Buy Surplus As Low As £8.16 Price with VAT: £9.79
    £8.16 Price with VAT: £9.79
    DREMEL BE007

    DREMEL

    BE007

    BEARING ENLARGER 7/8"
    £12.61 Price with VAT: £15.13 Buy Surplus As Low As £8.16 Price with VAT: £9.79
    £8.16 Price with VAT: £9.79
    DREMEL 531-02

    DREMEL

    531-02

    END BRUSHES: 1/2" DIA, STAINLESS STEEL, FLAT FACED WIRE 3 MM SHANK DIA, 15,000 MAX RPM (MOQ=2, PKG QTY=2)
    £12.61 Price with VAT: £15.13 Buy Surplus As Low As £8.16 Price with VAT: £9.79
    £8.16 Price with VAT: £9.79
    DREMEL 537-02

    DREMEL

    537-02

    1/8" DIAM BRASS FLAT FACED END BRUSH 1/8" SHANK DIAM, 15,000 MAX RPM (MOQ=1, PKG QTY=2)
    £13.35 Price with VAT: £16.02 Buy Surplus As Low As £8.16 Price with VAT: £9.79
    £8.16 Price with VAT: £9.79
    DREMEL 26159924JA

    DREMEL

    26159924JA

    (PRICE/PK OF 3), ENGRAVER TIP, PACK-3; ACCESSORY TYPE:CARBIDE ENGRAVING TIP; FOR USE WITH:DREMEL ENGRAVER 290; PRODUCT RANGE:-; PLUG TYPE:-; SVHC:NO SVHC (15-JUN-2015); TIP MATERIAL:CARBIDE ...
    £14.83 Price with VAT: £17.80 Buy Surplus As Low As £8.90 Price with VAT: £10.68
    £8.90 Price with VAT: £10.68
    DREMEL 504

    DREMEL

    504

    MOUNTED FLAP WHEEL: 3/16" DIA, 80 GRIT, ALUMINUM OXIDE 1/8" SHANK DIA, COATED, MEDIUM GRADE (MOQ=1, PKG QTY=1)
    £14.83 Price with VAT: £17.80 Buy Surplus As Low As £3.68 Price with VAT: £4.42
    £3.68 Price with VAT: £4.42
    DREMEL 409

    DREMEL

    409

    CUTOFF WHEEL: 15/16" DIA, 0.025" THICK, 1/8" HOLE (MOQ=1, PKG QTY=36)
    £14.83 Price with VAT: £17.80 Buy Surplus As Low As £8.90 Price with VAT: £10.68
    £8.90 Price with VAT: £10.68
    DREMEL 420

    DREMEL

    420

    CUTOFF WHEEL: 15/16" DIA, 0.04" THICK, 1/8" HOLE 30,000 MAX RPM, USE WITH ANGLE GRINDERS (MOQ=1, PKG QTY=20)
    £14.83 Price with VAT: £17.80 Buy Surplus As Low As £8.90 Price with VAT: £10.68
    £8.90 Price with VAT: £10.68
    DREMEL 2615S511JA

    DREMEL

    2615S511JA

    (PRICE/PK OF 2), ABRASIVE BUFFS DISC, 25MM, 280GRIT, PK2; ABRASIVE MATERIAL:-; DISC DIAMETER:25MM; ABRASIVE COLOUR:-; ABRASIVE GRADE:-; BORE SIZE:3.2MM; OPERATING SPEED MAX:20000RPM; PRODUCT ...
    £14.83 Price with VAT: £17.80 Buy Surplus As Low As £8.90 Price with VAT: £10.68
    £8.90 Price with VAT: £10.68
    DREMEL 2615S512JA

    DREMEL

    2615S512JA

    (PRICE/PK OF 2), ABRASIVE BUFFS DISC, 25MM, 320GRIT, PK2; ABRASIVE MATERIAL:-; DISC DIAMETER:25MM; ABRASIVE COLOUR:-; ABRASIVE GRADE:-; BORE SIZE:3.2MM; OPERATING SPEED MAX:20000RPM; PRODUCT ...
    £14.83 Price with VAT: £17.80 Buy Surplus As Low As £8.90 Price with VAT: £10.68
    £8.90 Price with VAT: £10.68
    DREMEL 405

    DREMEL

    405

    (PRICE/BOX; 5EA/BOX)1/8" BRISTLE BRUSH
    £14.83 Price with VAT: £17.80 Buy Surplus As Low As £8.90 Price with VAT: £10.68
    £8.90 Price with VAT: £10.68
    DREMEL 503

    DREMEL

    503

    MOUNTED FLAP WHEEL: 3/8" DIA, 120 GRIT, ALUMINUM OXIDE 1/8" SHANK DIA, COATED, FINE GRADE (MOQ=1, PKG QTY=1)
    £14.83 Price with VAT: £17.80 Buy Surplus As Low As £3.38 Price with VAT: £4.05
    £3.38 Price with VAT: £4.05
    DREMEL 9903

    DREMEL

    9903

    TUNGSTEN CARBIDE HIGH SPEED CUTTER 1/8” DIAMETER WITH 1/8” SHANK
    £14.83 Price with VAT: £17.80 Buy Surplus As Low As £5.19 Price with VAT: £6.23
    £5.19 Price with VAT: £6.23
    DREMEL 535-02

    DREMEL

    535-02

    3/4" OD, 1/8" SHANK DIAM, STRAIGHT FILAMENT BRASS WHEEL BRUSH 1/16" FACE WIDTH, 3/4" TRIM LENGTH, 15,000 RPM (MOQ=2, PKG QTY=2)
    £14.83 Price with VAT: £17.80 Buy Surplus As Low As £8.90 Price with VAT: £10.68
    £8.90 Price with VAT: £10.68
    DREMEL BE008

    DREMEL

    BE008

    BEARING ENLARGER 1"
    £14.83 Price with VAT: £17.80 Buy Surplus As Low As £8.90 Price with VAT: £10.68
    £8.90 Price with VAT: £10.68
    DREMEL 536

    DREMEL

    536

    (PRICE/PK OF 2), BRASS BRUSH, 12.7MM, PK2; OVERALL LENGTH:51MM; WIDTH:-; BRISTLE MATERIAL:BRASS WIRE; HANDLE MATERIAL:-; PRODUCT RANGE:-; SVHC:NO SVHC (15-JUN-2015); ACCESSORY TYPE:BRASS BRU ...
    ✓ IN STOCK!
    £15.35 Price with VAT: £18.42 Buy Surplus As Low As £7.05 Price with VAT: £8.45
    £7.05 Price with VAT: £8.45
    DREMEL 505

    DREMEL

    505

    MOUNTED FLAP WHEEL: 3/16" DIA, 120 GRIT, ALUMINUM OXIDE 1/8" SHANK DIA, COATED, FINE GRADE (MOQ=1, PKG QTY=1)
    £15.57 Price with VAT: £18.69 Buy Surplus As Low As £3.38 Price with VAT: £4.05
    £3.38 Price with VAT: £4.05
    DREMEL 500

    DREMEL

    500

    500 ALUMINIUM OXIDE ABRASIVE WHEEL
    £15.57 Price with VAT: £18.69 Buy Surplus As Low As £9.64 Price with VAT: £11.57
    £9.64 Price with VAT: £11.57
    DREMEL HCFC2103

    DREMEL

    HCFC2103

    DRILL BIT, BULLDOG XTREME HAMMER DRILL BIT 5/8"X10"X12"
    £15.57 Price with VAT: £18.69 Buy Surplus As Low As £9.64 Price with VAT: £11.57
    £9.64 Price with VAT: £11.57
    DREMEL 26150115AD

    DREMEL

    26150115AD

    ABRASIVE BUR: CYLINDER (MOQ=1, PKG QTY=2)
    £15.57 Price with VAT: £18.69 Buy Surplus As Low As £9.64 Price with VAT: £11.57
    £9.64 Price with VAT: £11.57
    DREMEL 801

    DREMEL

    801

    CARBIDE SHAPING WHEEL
    £16.31 Price with VAT: £19.58 Buy Surplus As Low As £10.38 Price with VAT: £12.46
    £10.38 Price with VAT: £12.46
    DREMEL 502

    DREMEL

    502

    MOUNTED FLAP WHEEL: 3/8" DIA, 80 GRIT, ALUMINUM OXIDE 1/8" SHANK DIA, COATED, MEDIUM GRADE (MOQ=1, PKG QTY=1)
    £16.31 Price with VAT: £19.58 Buy Surplus As Low As £3.38 Price with VAT: £4.05
    £3.38 Price with VAT: £4.05
    DREMEL EZ476

    DREMEL

    EZ476

    CUTOFF WHEEL: 1-1/2" DIA, 0.045" THICK, 1-1/2" HOLE REINFORCED, 35,000 MAX RPM (MOQ=1, PKG QTY=5)
    £16.31 Price with VAT: £19.58 Buy Surplus As Low As £10.38 Price with VAT: £12.46
    £10.38 Price with VAT: £12.46
    DREMEL 84922

    DREMEL

    84922

    MOUNTED POINT: 13/32" THICK, 1/8" SHANK DIA BLUE, SILICON CARBIDE (MOQ=1, PKG QTY=2)
    £16.31 Price with VAT: £19.58 Buy Surplus As Low As £10.38 Price with VAT: £12.46
    £10.38 Price with VAT: £12.46
    DREMEL 686-01

    DREMEL

    686-01

    (PRICE/ST) SANDING / GRINDING SET (31 PCS)
    £17.06 Price with VAT: £20.47 Buy Surplus As Low As £10.38 Price with VAT: £12.46
    £10.38 Price with VAT: £12.46
    DREMEL 2610912780

    DREMEL

    2610912780

    SWITCH ON/OFF
    £23.47 Price with VAT: £28.16 Buy Surplus As Low As £11.74 Price with VAT: £14.09
    £11.74 Price with VAT: £14.09
    Repair Yours Contact Us
    DREMEL 535

    DREMEL

    535

    (PRICE/PK OF 2), BRASS BRUSH, 19.1MM, PK2; PRODUCT RANGE:-; SVHC:NO SVHC (15-JUN-2015); ACCESSORY TYPE:BRASS BRUSH; FOR USE WITH:CLEANING AND SURFACE FINISHING OF GOLD, BRONZE, COPPER OR BRA ...
    £17.80 Price with VAT: £21.36 Buy Surplus As Low As £11.12 Price with VAT: £13.35
    £11.12 Price with VAT: £13.35
    DREMEL 7105

    DREMEL

    7105

    MOUNTED POINT: 1/8" SHANK DIA TEAL, DIAMOND, 0.4" SHANK LENGTH (MOQ=1, PKG QTY=1)
    £17.80 Price with VAT: £21.36 Buy Surplus As Low As £11.12 Price with VAT: £13.35
    £11.12 Price with VAT: £13.35
    DREMEL 426

    DREMEL

    426

    CUTOFF WHEEL: 1-1/4" DIA, 0.045" THICK, 1/16" HOLE REINFORCED, 35,000 MAX RPM, USE WITH ANGLE GRINDERS (MOQ=1, PKG QTY=5)
    £17.80 Price with VAT: £21.36 Buy Surplus As Low As £11.12 Price with VAT: £13.35
    £11.12 Price with VAT: £13.35
    DREMEL 1612025032

    DREMEL

    1612025032

    COMPLETE HANDLE ASSEMBLYF/11210-112
    £17.80 Price with VAT: £21.36 Buy Surplus As Low As £11.12 Price with VAT: £13.35
    £11.12 Price with VAT: £13.35
    DREMEL 9904

    DREMEL

    9904

    ABRASIVE BUR: CYLINDER WITH RADIUS 1/8" SHANK (MOQ=1, PKG QTY=1)
    £17.80 Price with VAT: £21.36 Buy Surplus As Low As £11.12 Price with VAT: £13.35
    £11.12 Price with VAT: £13.35
    DREMEL 4486

    DREMEL

    4486

    FLEXIBLE SHAFT GRINDER CHUCK (MOQ=1, PKG QTY=1)
    £18.54 Price with VAT: £22.25 Buy Surplus As Low As £11.12 Price with VAT: £13.35
    £11.12 Price with VAT: £13.35
    DREMEL RZVAC1

    DREMEL

    RZVAC1

    VACUUM ADAPTER
    £18.54 Price with VAT: £22.25 Buy Surplus As Low As £11.87 Price with VAT: £14.24
    £11.87 Price with VAT: £14.24
    Repair Yours Contact Us
    DREMEL 456-01

    DREMEL

    456-01

    (PRICE/PK) 1-1/2 X 0.045, 0.025" HOLE CUTOFF WHEEL REINFORCED, 35,000 MAX RPM, USE WITH ANGLE GRINDERS
    £19.28 Price with VAT: £23.14 Buy Surplus As Low As £11.87 Price with VAT: £14.24
    £11.87 Price with VAT: £14.24
    DREMEL 7120

    DREMEL

    7120

    MOUNTED POINT: 1/8" SHANK DIA TEAL, DIAMOND, 0.4" SHANK LENGTH (MOQ=1, PKG QTY=1)
    £19.28 Price with VAT: £23.14 Buy Surplus As Low As £6.67 Price with VAT: £8.01
    £6.67 Price with VAT: £8.01
    DREMEL EZ471SA

    DREMEL

    EZ471SA

    BRUSH: USE WITH EZ402 OR 402 MANDRELS INCLUDES (1) BLADE (MOQ=1, PKG QTY=1)
    £20.02 Price with VAT: £24.03 Buy Surplus As Low As £12.61 Price with VAT: £15.13
    £12.61 Price with VAT: £15.13
    DREMEL 688-01

    DREMEL

    688-01

    (PRICE/ST) CUT-OFF WHEEL SET (69 PCS)
    £21.51 Price with VAT: £25.81 Buy Surplus As Low As £13.35 Price with VAT: £16.02
    £13.35 Price with VAT: £16.02
    DREMEL EZ456

    DREMEL

    EZ456

    CUTOFF WHEEL: 1-1/2" DIA, 0.045" THICK, 1-1/2" HOLE, ALUMINUM OXIDE REINFORCED, 35,000 MAX RPM, USE WITH ANGLE GRINDERS (MOQ=1, PKG QTY=5)
    £21.51 Price with VAT: £25.81 Buy Surplus As Low As £13.35 Price with VAT: £16.02
    £13.35 Price with VAT: £16.02
    Previous Next
    1 2 3 4