SEARCH NOW FOR ALL YOUR ELECTROCRAFT SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
ELECTROCRAFT
MP26-WR-032V24-420-D
GEARMOTOR, 4 POLE, RIGHT HAND WORM AND SPUR, RIGHT HAND OUTPUT SHAFT, 32:1 RATIO, 24 VDC, GEAR RELEASE, STANDARD BRAKE, SHIELDED CABLE, ENCODER
✓ IN STOCK!
£303.85
Price with VAT:
£364.62
ELECTROCRAFT
MPP36-WL-030V24-200-X
MOTOR, 4-POLE,LH SHAFT, 30.00 RATIO, 24V, NO GEAR RELEASE, MANUAL BRAKE RELEASE, NO ENCODER
✓ IN STOCK!
£277.84
Price with VAT:
£333.41
ELECTROCRAFT
RPP23M-83V48-002-E
BRUSHLESS SERVO MOTOR, TYPE RPP, RAPID POWER PLUS, FRAME SIZE 23, METRIC, TORQUE 83 NCM, 48 VDC, NO REAR SHAFT, ROUND FRONT SHAFT, FLYING CABLE, 2000 DIFF
✓ IN STOCK!
£342.21
Price with VAT:
£410.65
ELECTROCRAFT
LRPX22-042V12-010-X 504
BRUSHLESS DC PLANETARY GEAR MOTOR, LRPX22 RAPIDPOWER XTREME, PEAK OPERATING EFFICIENCY AT LOW RPM, HIGH TORQUE FROM A SMALL FROM FACTOR WITH LOW POWER CONSUMPTION, PEAK PERFORMANCE AT LOW RP ...
£289.76
Price with VAT:
£347.71
ELECTROCRAFT
LRPX40-250V24-120-S006
GEAR MOTOR, FRAME SIZE 40MM, TORQUE 250 MNM, VOLTAGE 24V, FRONT SHAFT KEYSEAT, FLYING LEADS, 2028 DIFF, ENCODER, 006 GEAR RATIO
✓ IN STOCK!
£313.75
Price with VAT:
£376.50
ELECTROCRAFT
LRPX22-042V24-110-S033
GEAR MOTOR, FRAME SIZE 22MM, TORQUE 042 MNM, VOLTAGE 24V, FRONT SHAFT STANDARD FLAT, FLYING LEADS, 2028 DIFF, ENCODER, 033 GEAR RATIO
✓ IN STOCK!
£272.65
Price with VAT:
£327.18
ELECTROCRAFT
LRPX40-250V24-120-S011
GEAR MOTOR, FRAME SIZE 40MM, TORQUE 250 MNM, VOLTAGE 24V, FRONT SHAFT KEYSEAT, FLYING LEADS, 2028 DIFF, ENCODER, 011 GEAR RATIO
£295.63
Price with VAT:
£354.76
ELECTROCRAFT
PRO-A04V36A-SA-CAT
PROGRAMMABLE DRIVES FOR (ROTARY OR LINEAR) BRUSHLESS_ STEPPER_ PMDC MOTORS, 48V, 8A, 385W, ENC. CAN, STAND-ALONE, PROGRAMMABLE DRIVE
£220.25
Price with VAT:
£264.30
ELECTROCRAFT
MPP26-WR-018V24-220-D
MOTOR, 4-POLE, RH SHAFT, 18.35 RATIO, 24V, NO GEAR RELEASE, MANUAL BRAKE RELEASE, ENCODER
✓ IN STOCK!
£357.25
Price with VAT:
£428.70
ELECTROCRAFT
RPX32-090V24-100-S
BRUSHLESS DC SERVO MOTORS, TYPE RPX, FRAME SIZE 32 MM, TORQUE 090 NMN, VOLTAGE, 24 VOLTS, REAR SHAFT, ROUND FRONT SHAFT, FLYING LEAD, 2048 DIFF
£222.47
Price with VAT:
£266.97
ELECTROCRAFT
MP24-WR-021V24-420-D
MOTOR, 4-POLE BLDC, RH SHAFT, 21.33 RATIO, 24V, GEAR RELEASE, STANDARD BRAKE, ENCODER
£297.85
Price with VAT:
£357.42
ELECTROCRAFT
RPX52-750V24-100-F
BRUSHLESS DC SERVO MOTORS, FRAME SIZE 52MM, TORQUE 750 NMN, 24 VOLTS, 5000 DIFF
£297.10
Price with VAT:
£356.52
ELECTROCRAFT
MPP26-WL-018V24-220-D
MOTOR, 4-POLE,LH SHAFT, 18.35 RATIO, 24V, NO GEAR RELEASE, MANUAL BRAKE RELEASE, ENCODER
✓ IN STOCK!
£393.20
Price with VAT:
£471.84
ELECTROCRAFT
MPP26-WL-030V24-220-D
MOTOR, 4-POLE,LH SHAFT, 30.00 RATIO, 24V, NO GEAR RELEASE, MANUAL BRAKE RELEASE, ENCODER
✓ IN STOCK!
£357.25
Price with VAT:
£428.70
ELECTROCRAFT
LRPX32-090V24-110-S019
GEAR MOTOR, FRAME SIZE 32MM, TORQUE 090 MNM, VOLTAGE 24V, FRONT SHAFT STANDARD FLAT, FLYING LEADS, 2028 DIFF, ENCODER, 019 GEAR RATIO
£324.52
Price with VAT:
£389.42
ELECTROCRAFT
LRPX40-250V24-010-X356
BRUSHLESS DC PLANETARY GEAR MOTOR,40MM FRAME SIZE,250 MNM,24 VOLT, FLAT FRONT SHAFT, FLYING LEADS, HALF ONLY FEEDBACK
£255.10
Price with VAT:
£306.13
ELECTROCRAFT
LRPX40-250V24-020-X346
GEAR MOTOR, BRUSHLESS DC PLANETARY, 40 MM FRAME SIZE, 250 TORQUE MNM, 24 VOLT
£255.10
Price with VAT:
£306.13
ELECTROCRAFT
LRPX40-250V24-020-X383
GEAR MOTOR, 40 MM FRAME SIZE, 250 TORQUE MNM, 24 VOLT, KEY FRONT SHAFT, HALL ONLY, 383. 2:1
£255.10
Price with VAT:
£306.13
ELECTROCRAFT
RPP34M-200V160-001-E
MOTOR,34 FRAME SIZE,160 VOLT,200 NCM,0 REAR SHAFT,ROUND FRONT SHAFT,STD CONNECTOR,ENCODER 2000 DIFF FEEDACK
£352.12
Price with VAT:
£422.54
ELECTROCRAFT
MPP26-WR-030V24-220-D
MOTOR, 4-POLE, RH SHAFT, 30.00 RATIO, 24V, NO GEAR RELEASE, MANUAL BRAKE RELEASE, ENCODER
✓ IN STOCK!
£380.77
Price with VAT:
£456.92
ELECTROCRAFT
LRPX32-090V24-110-S033
MOTOR,FRAME SIZE 32,090 MNM,24 VOLT,REAR SHAFT,STD FLAT FRONT SHAFT,NO FLYING LEADS,ENCODER 2048 DIFF,033 GEAR RATIO
✓ IN STOCK!
£318.59
Price with VAT:
£382.31
ELECTROCRAFT
MP26-WL-021V24-420-D
MOTOR, 4-POLE, LH SHAFT, 21.33 RATIO, 24V, GEAR RELEASE, STANDARD BRAKE, ENCODER
£280.32
Price with VAT:
£336.38
ELECTROCRAFT
MP26-WL-027V24-420-D
MOTOR, 4-POLE, LH SHAFT, 26.82 RATIO, 24V, GEAR RELEASE, STANDARD BRAKE, ENCODER
£280.32
Price with VAT:
£336.38
ELECTROCRAFT
LA23GCKB-200J
STEPPER MOTOR,LINEAR ACTUATOR,2AMP,1.8DEG,4 WIRE
✓ IN STOCK!
£306.24
Price with VAT:
£367.49
ELECTROCRAFT
MPP24-WR-030V24-220-D
MOTOR, 4-POLE BLDC, RH SHAFT, 30.00 RATIO, 24 VOLT, NO GEAR RELEASE, MANUAL BRAKE RELEASE, ENCODER
✓ IN STOCK!
£407.50
Price with VAT:
£489.00
ELECTROCRAFT
RPP23M-69V48-002-E
BRUSHLESS SERVO MOTOR, TYPE RPP, RAPID POWER PLUS, FRAME SIZE 23, METRIC, TORQUE 69 NCM, 48 VDC, NO REAR SHAFT, ROUND FRONT SHAFT, FLYING CABLE, 2000 DIFF
£284.77
Price with VAT:
£341.72
ELECTROCRAFT
9101-1183
EXTERNAL SHUNT, RESISTOR, 200 W, FOR BRU-200-DM-30
£284.77
Price with VAT:
£341.72
ELECTROCRAFT
MP24-WL-018V24-420-D
MOTOR, 4-POLE BLDC, LH SHAFT, 17.88 RATIO, 24V, GEAR RELEASE, STANDARD BRAKE, ENCODER
£289.22
Price with VAT:
£347.06
ELECTROCRAFT
MP24-WL-032V24-420-D
MOTOR, 4-POLE BLDC, LH SHAFT, 32.00 RATIO, 24V, GEAR RELEASE, STANDARD BRAKE, ENCODER
£289.22
Price with VAT:
£347.06
ELECTROCRAFT
MP24-WR-018V24-420-D
MOTOR, 4-POLE BLDC, RH SHAFT, 17.88 RATIO, 24V, GEAR RELEASE, STANDARD BRAKE, ENCODER
£289.22
Price with VAT:
£347.06
ELECTROCRAFT
MP24-WR-032V24-420-D
MOTOR, 4-POLE BLDC, RH SHAFT, 32.00 RATIO, 24V, GEAR RELEASE, STANDARD BRAKE, ENCODER
£289.22
Price with VAT:
£347.06
ELECTROCRAFT
MP24-WL-027V24-420-D
MOTOR, 4-POLE BLDC, LH SHAFT, 26.82 RATIO, 24V, GEAR RELEASE, STANDARD BRAKE, ENCODER
£289.22
Price with VAT:
£347.06
ELECTROCRAFT
MP24-WR-027V24-420-D
MOTOR, 4-POLE BLDC, RH SHAFT, 26.82 RATIO, 24V, GEAR RELEASE, STANDARD BRAKE, ENCODER
£289.22
Price with VAT:
£347.06
ELECTROCRAFT
LRPX40-250V24-120-S170
GEAR MOTOR, FRAME SIZE 40MM, TORQUE 250 MNM, VOLTAGE 24V, FRONT SHAFT KEYSEAT, FLYING LEADS, 2028 DIFF, ENCODER, 170 GEAR RATIO
✓ IN STOCK!
£400.09
Price with VAT:
£480.11
ELECTROCRAFT
LRPX40-250V24-120-S019
GEAR MOTOR, FRAME SIZE 40MM, TORQUE 250 MNM, VOLTAGE 24V, FRONT SHAFT KEYSEAT, FLYING LEADS, 2028 DIFF, ENCODER, 019 GEAR RATIO
✓ IN STOCK!
£381.57
Price with VAT:
£457.88
ELECTROCRAFT
LRPX32-090V24-110-S010
GEAR MOTOR, FRAME SIZE 32MM, TORQUE 090 MNM, VOLTAGE 24V, FRONT SHAFT STANDARD FLAT, FLYING LEADS, 2028 DIFF, ENCODER, 010 GEAR RATIO
£315.17
Price with VAT:
£378.21
ELECTROCRAFT
PT42-A55V48A-0-X-CAN
INTEGRATED MOTOR DRIVE CONTROLLER, STEPPER MOTOR, TYPE PT, FRAME SIZE 42, DRIVE TYPE A, TORQUE 55 NCM, VOLTAGE 48 VOLTS, ROUND FRONT SHAFT, NO FEEDBACK, CANOPEN
£323.33
Price with VAT:
£388.00
ELECTROCRAFT
PRO-A20V80A-SA-CAN
PROGRAMMABLE DRIVES FOR (ROTARY OR LINEAR) BRUSHLESS, STEPPER, PMDC MOTORS, 80V, 20A, 1600W, ENC. CAN, STAND-ALONE, PROGRAMMABLE DRIVE
✓ IN STOCK!
£437.88
Price with VAT:
£525.46
ELECTROCRAFT
E19-1
SERVO MOTOR BRUSHLESS 1-1/2IN STROKJE
✓ IN STOCK!
£255.80
Price with VAT:
£306.96
ELECTROCRAFT
43-0578
RISING TABLE MOTOR, DEK-S663-1A+1000LD+ CONNS
✓ IN STOCK!
£285.44
Price with VAT:
£342.53
ELECTROCRAFT
PT42-A55V48A-0-D-CAN
INTEGRATED MOTOR DRIVE CONTROLLER, STEPPER MOTOR, TYPE PT, FRAME SIZE 42, DRIVE TYPE A, TORQUE 55 NCM, VOLTAGE 48 VOLTS, ROUND FRONT SHAFT, 1000 CPR, DIFFERENTIAL, CANOPEN
£397.49
Price with VAT:
£476.99
ELECTROCRAFT
PS42-A44V48A-0AB4-D-CAN
INTEGRATED MOTOR DRIVE & CONTROLLER, STEPPER LINEAR ACTUATOR, TYPE PS42, DRIVE TYPE A, TORQUE 44 NCM, VOLTAGE 48 VOLTS, LINEAR CONFIG, LEAD SCREW PITCH 1-4-16(1S), LEAD SCREW AOL 6 INCH, 10- ...
£440.50
Price with VAT:
£528.60
