Product Search

    SEARCH NOW FOR ALL YOUR FANUC SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 51-100 of 403.
    FANUC IC698ETM001

    FANUC

    GE FANUC

    IC698ETM001

    DISCONTINUED BY MANUFACTURER, ETHERNET INTERFACE MODULE, PAC SYSTEMS, RX7I, STANDALONE, TCP/IP,10/100, SRTP, EGD, 2 ETHERNET PORT, 10BASET / 100BASETX, RJ-45 CONNECTOR, 8-PIN FEMALE, SHIELDE ...
    ✓ IN STOCK!
    Buy Surplus As Low As £999.54 Price with VAT: £1,199.45
    £999.54 Price with VAT: £1,199.45
    Repair Yours £840.24 Price with VAT: £1,008.29
    FANUC HE693ADC415

    FANUC

    GE FANUC

    HE693ADC415

    DISCONTINUED BY MANUFACTURER, ANALOG INPUT MODULE, FOR SERIES 90-30, 4 CHANNEL, 4-20 MA, WITH 500 VAC RMS / 700 VDC ISOLATION, 14-BIT RESOLUTION
    Buy Surplus As Low As £884.63 Price with VAT: £1,061.56
    £884.63 Price with VAT: £1,061.56
    Repair Yours £823.43 Price with VAT: £988.12
    FANUC IC693DNS201

    FANUC

    IC693DNS201

    DEVICENET SLAVE
    ✓ IN STOCK!
    £2,075.19 Price with VAT: £2,490.23 Buy Surplus As Low As £1,075.38 Price with VAT: £1,290.46
    £1,075.38 Price with VAT: £1,290.46
    Repair Yours £822.10 Price with VAT: £986.52
    FANUC IC693CPU351

    FANUC

    GE FANUC

    IC693CPU351

    DISCONTINUED BY MANUFACTURER, SINGLE SLOT CPU MODULE, 240K BYTES CONFIGURABLE USER MEMORY, 4K I/O, 8 RACKS, TWO BUILT-IN SERIAL PORTS, 25 MHZ
    ✓ IN STOCK!
    Buy Surplus As Low As £1,339.14 Price with VAT: £1,606.97
    £1,339.14 Price with VAT: £1,606.97
    Repair Yours £818.21 Price with VAT: £981.85
    FANUC IC693APU305

    FANUC

    GE FANUC

    IC693APU305

    DISCONTINUED BY MANUFACTURER, I/O PROCESSOR MODULE, VELOCITY MEASUREMENT, 32 DISCRETE INPUTS, 5 VDC BUS, 24 VDC ISOLATED OUTPUT
    ✓ IN STOCK!
    Buy Surplus As Low As £937.02 Price with VAT: £1,124.42
    £937.02 Price with VAT: £1,124.42
    Repair Yours £808.76 Price with VAT: £970.51
    FANUC IC695ALG708

    FANUC

    GE FANUC

    IC695ALG708

    ANALOG OUTPUT MODULE, 8 CHANNELS, CONFIGURABLE FOR VOLTAGE AND CURRENT, CONFIGURED FOR CURRENT: 0 TO 20 MA, 4 TO 20 MA; VOLTAGE: +/- 10 VDC, 0 TO 10 VDC PER CHANNEL NON ISOLATED
    ✓ IN STOCK!
    £2,151.93 Price with VAT: £2,582.32 Buy Surplus As Low As £1,184.61 Price with VAT: £1,421.53
    £1,184.61 Price with VAT: £1,421.53
    Repair Yours £781.23 Price with VAT: £937.48
    FANUC IC660BBD110

    FANUC

    GE FANUC

    IC660BBD110

    DISCONTINUED BY MANUFACTURER, I/O MODULE, GENIUS BLOCK, 16 CIRCUIT, 115 VAC POWER, FOR 2 OR 3 WIRE SWITCH INPUTS
    ✓ IN STOCK!
    Buy Surplus As Low As £1,057.84 Price with VAT: £1,269.41
    £1,057.84 Price with VAT: £1,269.41
    Repair Yours £766.50 Price with VAT: £919.80
    FANUC IC698PSD300

    FANUC

    GE FANUC

    IC698PSD300

    DISCONTINUED BY MANUFACTURER, POWER SUPPLY, 300 WATT, INPUT 18-30 V DC
    ✓ IN STOCK!
    Buy Surplus As Low As £973.72 Price with VAT: £1,168.46
    £973.72 Price with VAT: £1,168.46
    Repair Yours £761.78 Price with VAT: £914.14
    FANUC IC694ALG391

    FANUC

    GE FANUC

    IC694ALG391

    DISCONTINUED BY MANUFACTURER, OUTPUT MODULE, ANALOG CURRENT, 2 POINTS, 1-5 V & 0-5 V / 0-20 MA / 4-20 MA ANALOG OUTPUT, 12 BIT RESOLUTION, PACSYSTEMS RX3I, PANEL/DIN RAIL MOUNT
    ✓ IN STOCK!
    Buy Surplus As Low As £906.16 Price with VAT: £1,087.39
    £906.16 Price with VAT: £1,087.39
    Repair Yours £752.12 Price with VAT: £902.54
    FANUC HE697THM160

    FANUC

    GE FANUC

    HE697THM160

    DISCONTINUED BY MANUFACTURER, INPUT MODULE, FOR SERIES 90-70, THERMOCOUPLE, 16 CHANNEL, 0.1 DEGREES C RESOLUTION
    Buy Surplus As Low As £861.69 Price with VAT: £1,034.03
    £861.69 Price with VAT: £1,034.03
    Repair Yours £743.54 Price with VAT: £892.25
    FANUC IC754CSL12CTD

    FANUC

    GE FANUC

    IC754CSL12CTD

    DISCONTINUED BY MANUFACTURER, OPERATOR INTERFACE, QUICKPANEL CONTROL, 12 INCH, TFT, LOADED, 24 VDC, ES1222
    ✓ IN STOCK!
    Buy Surplus As Low As £1,026.99 Price with VAT: £1,232.39
    £1,026.99 Price with VAT: £1,232.39
    Repair Yours £741.75 Price with VAT: £890.10
    FANUC IC695HSC308

    FANUC

    GE FANUC

    IC695HSC308

    RX3I HIGH SPEED COUNTER, 8 CHANNELS, 16 CONFIGURABLE INPUTS AND 14 CONFIGURABLE ESCP OUTPUTS, MODULE SUPPORTS HIGH SPEED COUNTING, INPUT INTERRUPTS, PROGRAMMABLE LIMIT SWITCH
    ✓ IN STOCK!
    £2,210.99 Price with VAT: £2,653.19 Buy Surplus As Low As £1,548.57 Price with VAT: £1,858.28
    £1,548.57 Price with VAT: £1,858.28
    Repair Yours £732.51 Price with VAT: £879.01
    FANUC IC698CHS117

    FANUC

    GE FANUC

    IC698CHS117

    PLC RACK, FRONT MOUNT, 17 SLOTS, SERIES 90-70 I/O
    ✓ IN STOCK!
    £1,510.25 Price with VAT: £1,812.30 Buy Surplus As Low As £839.80 Price with VAT: £1,007.76
    £839.80 Price with VAT: £1,007.76
    Repair Yours £731.88 Price with VAT: £878.26
    FANUC IC697HSC700

    FANUC

    GE FANUC

    IC697HSC700

    DISCONTINUED BY MANUFACTURER, PLC MODULE, COUNTER, HIGH SPEED, SERIES 90-70, INPUT/OUTPUT, 5-30 VDC, 500 MA, 200 KHZ
    ✓ IN STOCK!
    Buy Surplus As Low As £1,176.10 Price with VAT: £1,411.32
    £1,176.10 Price with VAT: £1,411.32
    Repair Yours £729.31 Price with VAT: £875.17
    FANUC IC755CSW07CDA

    FANUC

    GE FANUC

    IC755CSW07CDA

    OPERATOR INTERFACE, QUICK PANEL, 7 INCH, COLOR TFT, WIDESCREEN W/ MULTI-TOUCH PROJECTED CAPACITIVE SCREEN, GE MONOGRAM BEZEL, 24 VDC POWERED
    ✓ IN STOCK!
    £2,983.86 Price with VAT: £3,580.63 Buy Surplus As Low As £1,938.97 Price with VAT: £2,326.76
    £1,938.97 Price with VAT: £2,326.76
    Repair Yours £718.14 Price with VAT: £861.77
    FANUC IC695MDL765

    FANUC

    GE FANUC

    IC695MDL765

    SMART DIGITAL OUTPUT MODULE, 24/125 VOLT DC, ESCP 1A POSITIVE LOGIC 16 POINTS
    £2,130.30 Price with VAT: £2,556.36 Buy Surplus As Low As £972.72 Price with VAT: £1,167.26
    £972.72 Price with VAT: £1,167.26
    Repair Yours £693.23 Price with VAT: £831.88
    FANUC IC693CPU352

    FANUC

    GE FANUC

    IC693CPU352

    DISCONTINUED BY MANUFACTURER, CPU MODULE, 352, 240K BYTE CONFIGURABLE USER MEMORY, 4K I/O, 8 RACK, HARDWARE FLOATING POINT MATH, TWO BUILT-IN SERIAL PORT
    ✓ IN STOCK!
    Buy Surplus As Low As £1,219.17 Price with VAT: £1,463.00
    £1,219.17 Price with VAT: £1,463.00
    Repair Yours £683.55 Price with VAT: £820.26
    FANUC IC695MDL664

    FANUC

    GE FANUC

    IC695MDL664

    SMART DIGITAL INPUT MODULE, 16 POINT, ADVANCED DIAGNOSTIC, POSITIVE LOGIC, 0.5-100 MS, SELECTABLE ON/OFF, 24 V DC, RANGE 20~30 V, 225 MA @ 5 V DC, 95 MA @ 3.3 V DC, ON PANEL/DIN RAIL MOUNTIN ...
    ✓ IN STOCK!
    £1,499.02 Price with VAT: £1,798.82 Buy Surplus As Low As £968.51 Price with VAT: £1,162.21
    £968.51 Price with VAT: £1,162.21
    Repair Yours £660.28 Price with VAT: £792.34
    FANUC IC693BEM330

    FANUC

    GE FANUC

    IC693BEM330

    DISCONTINUED BY MANUFACTURER, BUS CONTROLLER MODULE, REMOTE FIP, 10 MHZ
    ✓ IN STOCK!
    Buy Surplus As Low As £1,132.16 Price with VAT: £1,358.59
    £1,132.16 Price with VAT: £1,358.59
    Repair Yours £649.06 Price with VAT: £778.87
    FANUC IC200ALG328

    FANUC

    GE FANUC

    IC200ALG328

    DISCONTINUED BY MANUFACTURER, OUTPUT MODULE, VERSAMAX, ANALOG, 12 POINT, 13 BIT, CURRENT, 0-20 MA / 4-20 MA
    ✓ IN STOCK!
    Buy Surplus As Low As £683.06 Price with VAT: £819.67
    £683.06 Price with VAT: £819.67
    Repair Yours £648.65 Price with VAT: £778.38
    FANUC A06B-6079-H106

    FANUC

    A06B-6079-H106

    DISCONTINUED BY MANUFACTURER, SERVO DRIVE, SERVO AMPLIFIER, SERVO AMPLIFIER MODULE ALPHA-130/ SVM 1-130 PWM INTERFACE, ALPHA SERVO DRIVE MODEL SVM1-130, 52.2 AMP, 283-325 V, CNC
    ✓ IN STOCK!
    Buy Surplus As Low As £769.50 Price with VAT: £923.40
    £769.50 Price with VAT: £923.40
    Repair Yours £638.69 Price with VAT: £766.43
    FANUC IC693MAR590

    FANUC

    GE FANUC

    IC693MAR590

    DISCONTINUED BY MANUFACTURER, I/O MODULE, AC INPUT/RELAY OUTPUT MODULE, MIXED I/O 120 VAC INPUT 8 POINTS, RELAY OUTPUT 8 POINTS
    ✓ IN STOCK!
    Buy Surplus As Low As £1,236.89 Price with VAT: £1,484.27
    £1,236.89 Price with VAT: £1,484.27
    Repair Yours £630.84 Price with VAT: £757.01
    FANUC IC694ALG392

    FANUC

    GE FANUC

    IC694ALG392

    ANALOG OUTPUT MODULE, 8 CHANNEL, SUPPLY VOLTAGE 24VDC, VOLTAGE RANGE 0-10V, CURRENT RANGE 0-20MA, UPDATE RATE 8MSEC
    ✓ IN STOCK!
    £2,218.54 Price with VAT: £2,662.25 Buy Surplus As Low As £1,266.11 Price with VAT: £1,519.33
    £1,266.11 Price with VAT: £1,519.33
    Repair Yours £625.46 Price with VAT: £750.55
    FANUC IC655MDL552

    FANUC

    GE FANUC

    IC655MDL552

    OUTPUT MODULE 32POINT 12-24VDC NEGATIVE LOGIC
    ✓ IN STOCK!
    Buy Surplus As Low As £744.25 Price with VAT: £893.10
    £744.25 Price with VAT: £893.10
    Repair Yours £617.72 Price with VAT: £741.26
    FANUC IC600BF801

    FANUC

    GE FANUC

    IC600BF801

    DISCONTINUED BY MANUFACTURER, REMOTE I/O RECEIVER MODULE, SERIES SIX
    ✓ IN STOCK!
    Buy Surplus As Low As £704.14 Price with VAT: £844.97
    £704.14 Price with VAT: £844.97
    Repair Yours £613.65 Price with VAT: £736.38
    FANUC IC695CMM004

    FANUC

    GE FANUC

    IC695CMM004

    RX3I SERIAL COMMUNICATIONS MODULE, FOUR ISOLATED RS-232/485 PORT, SUPPORTS SERIAL READ/WRITE AND MODBUS MASTER/SLAVE, REQUIRES UNVERSAL BACKPLANE
    ✓ IN STOCK!
    £3,027.11 Price with VAT: £3,632.53 Buy Surplus As Low As £1,076.44 Price with VAT: £1,291.73
    £1,076.44 Price with VAT: £1,291.73
    Repair Yours £610.57 Price with VAT: £732.68
    FANUC IC697PCM711

    FANUC

    GE FANUC

    IC697PCM711

    DISCONTINUED BY MANUFACTURER, PROGRAMMABLE COPROCESSOR MODULE, SINGLE SLOT, SERIES 90-70, 12 MHZ, 80C186 MICROPROCESSOR, SUPPORTS UP TO 512 KBYTES OPTIONAL EXPANSION MEMORY, TWO RS-422/RS-48 ...
    ✓ IN STOCK!
    Buy Surplus As Low As £789.55 Price with VAT: £947.46
    £789.55 Price with VAT: £947.46
    Repair Yours £603.44 Price with VAT: £724.13
    FANUC IC693ALG442

    FANUC

    GE FANUC

    IC693ALG442

    DISCONTINUED BY MANUFACTURER, ANALOG CURRENT/VOLTAGE COMBINATION MODULE, GE SERIES 90-30, 4 INPUT/2 OUTPUT CHANNELS, 2 SINGLE-ENDED OUTPUT CHANNELS, OUTPUT CURRENT RANGES: 0-20MA AND 4-20MA
    ✓ IN STOCK!
    Buy Surplus As Low As £588.04 Price with VAT: £705.65
    £588.04 Price with VAT: £705.65
    Repair Yours £581.53 Price with VAT: £697.84
    FANUC IC695ALG616

    FANUC

    GE FANUC

    IC695ALG616

    ANALOG INPUT MODULE, 16 CHANNEL, CONFIGURABLE PER CHANNEL FOR CURRENT OR VOLTAGE, HIGH DENSITY, PACSYSTEMS RX3I
    ✓ IN STOCK!
    £2,043.43 Price with VAT: £2,452.12 Buy Surplus As Low As £710.83 Price with VAT: £853.00
    £710.83 Price with VAT: £853.00
    Repair Yours £577.69 Price with VAT: £693.23
    FANUC IC697RCM711

    FANUC

    GE FANUC

    IC697RCM711

    DISCONTINUED BY MANUFACTURER, REDUNDANCY COMMUNICATIONS MODULE, SERIES 90-70, 2 SERIAL PORTS, SINGLE SLOT, 5 LED INDICATORS, CONNECTS TO MS-DOS, 0.7 AMP
    ✓ IN STOCK!
    Buy Surplus As Low As £823.37 Price with VAT: £988.04
    £823.37 Price with VAT: £988.04
    Repair Yours £561.75 Price with VAT: £674.10
    FANUC IC695NIU001

    FANUC

    GE FANUC

    IC695NIU001

    DISCONTINUED BY MANUFACTURER, PLC MODULE,RX3I NIU WITH TWO SERIAL PORTS, 20K OF LOCAL LOGIC, MODULE REQUIRES UNIVERSAL BASE (IC695CHSXXX), REQUIRES ETHERNET MODULE (IC695ETM001), NIU SUPPORT ...
    ✓ IN STOCK!
    Buy Surplus As Low As £1,095.41 Price with VAT: £1,314.49
    £1,095.41 Price with VAT: £1,314.49
    Repair Yours £549.94 Price with VAT: £659.93
    FANUC IC755CSS06RDA

    FANUC

    IC755CSS06RDA

    OPERATOR INTERFACE, QUICK PANEL, 6 INCH SCREEN, QP+ ,RESISTIVE TOUCH KEYPAD, GE BEZEL
    ✓ IN STOCK!
    £1,456.70 Price with VAT: £1,748.04 Buy Surplus As Low As £702.48 Price with VAT: £842.98
    £702.48 Price with VAT: £842.98
    Repair Yours £549.59 Price with VAT: £659.51
    FANUC IC697CMM711

    FANUC

    GE FANUC

    IC697CMM711

    DISCONTINUED BY MANUFACTURER, COMMUNICATIONS COPROCESSOR MODULE, SERIES 90-70, SINGLE SLOT, 12 MHZ, 80C186 MICROPROCESSOR, TWO RS-422/RS-485 OR RS-232 SERIAL PORTS
    ✓ IN STOCK!
    Buy Surplus As Low As £782.17 Price with VAT: £938.60
    £782.17 Price with VAT: £938.60
    Repair Yours £549.15 Price with VAT: £658.98
    FANUC IC600YB801

    FANUC

    GE FANUC

    IC600YB801

    DISCONTINUED BY MANUFACTURER, REMOTE I/O RECEIVER MODULE, SERIES SIX, W/O FACEPLATE
    ✓ IN STOCK!
    Buy Surplus As Low As £808.11 Price with VAT: £969.73
    £808.11 Price with VAT: £969.73
    Repair Yours £533.01 Price with VAT: £639.61
    FANUC IC200EBI001

    FANUC

    GE FANUC

    IC200EBI001

    REMOTE I/O UNIT, VERSAMAX, DEVICENET NETWORK INTERFACE UNIT, EGD AND MODBUS TCP SERVER, 100 METERS MAX DROP LENGTH, 10/100 MBAUD, 256 BYTES INPUT / OUTPUT, 8 MODULES PER NIU STATION
    ✓ IN STOCK!
    £1,515.04 Price with VAT: £1,818.05 Buy Surplus As Low As £882.54 Price with VAT: £1,059.05
    £882.54 Price with VAT: £1,059.05
    Repair Yours £531.05 Price with VAT: £637.26
    FANUC IC610PER151

    FANUC

    GE FANUC

    IC610PER151

    DISCONTINUED BY MANUFACTURER, PRINTER INTERFACE MODULE, SNAP-ON MOUNT, CABLE PORT
    ✓ IN STOCK!
    Buy Surplus As Low As £668.45 Price with VAT: £802.14
    £668.45 Price with VAT: £802.14
    Repair Yours £528.58 Price with VAT: £634.30
    FANUC IC697CPU781

    FANUC

    GE FANUC

    IC697CPU781

    DISCONTINUED BY MANUFACTURER, CPU, 16 MHZ, 32-BIT, EXPANDABLE CENTRAL PROCESSING UNIT IS A SINGLE SLOT CPU, PROGRAMMED AND CONFIGURED BY MSDOS OR WINDOWS BASED
    ✓ IN STOCK!
    Buy Surplus As Low As £1,232.28 Price with VAT: £1,478.74
    £1,232.28 Price with VAT: £1,478.74
    Repair Yours £526.33 Price with VAT: £631.60
    FANUC IC693DSM302

    FANUC

    GE FANUC

    IC693DSM302

    DISCONTINUED BY MANUFACTURER, MOTION CONTROLLER, 2 AXIS, SERIES 90-30, MOTION MATE
    ✓ IN STOCK!
    Buy Surplus As Low As £653.25 Price with VAT: £783.90
    £653.25 Price with VAT: £783.90
    Repair Yours £511.85 Price with VAT: £614.22
    FANUC IC694ALG223

    FANUC

    GE FANUC

    IC694ALG223

    INPUT MODULE, PACSYSTEMS RX3I, 16 POINT, SINGLE ENDED, ANALOG CURRENT, HIGH DENSITY, 10 VDC, 0-20 MA
    ✓ IN STOCK!
    £2,273.33 Price with VAT: £2,728.00 Buy Surplus As Low As £680.82 Price with VAT: £816.98
    £680.82 Price with VAT: £816.98
    Repair Yours £506.67 Price with VAT: £608.00
    FANUC IC630MDL366

    FANUC

    GE FANUC

    IC630MDL366

    ANALOG OUTPUT MODULE, 4-20MA (2 CHANNELS)
    ✓ IN STOCK!
    £1,015.52 Price with VAT: £1,218.62 Buy Surplus As Low As £731.37 Price with VAT: £877.64
    £731.37 Price with VAT: £877.64
    Repair Yours £503.75 Price with VAT: £604.50
    FANUC IC660BBD120

    FANUC

    GE FANUC

    IC660BBD120

    DISCONTINUED BY MANUFACTURER, I/O MODULE, GENIUS BLOCK, HIGH SPEED COUNTER, 12 INPUT / 4 OUTPUT, 5 VDC OUTPUT, 93-132 VAC / 10-30 VDC BLOCK POWER, 37-63 HZ
    ✓ IN STOCK!
    Buy Surplus As Low As £749.28 Price with VAT: £899.14
    £749.28 Price with VAT: £899.14
    Repair Yours £503.52 Price with VAT: £604.22
    FANUC IC670MDL241

    FANUC

    GE FANUC

    IC670MDL241

    DISCONTINUED BY MANUFACTURER, INPUT MODULE, 16 POINT, 2 GROUPS OF 8, 240VAC
    ✓ IN STOCK!
    Buy Surplus As Low As £789.44 Price with VAT: £947.33
    £789.44 Price with VAT: £947.33
    Repair Yours £500.16 Price with VAT: £600.19
    FANUC IC694ALG222

    FANUC

    GE FANUC

    IC694ALG222

    INPUT MODULE, ANALOG, 16 POINT SINGLE ENDED, 8 CHANNEL DIFFERENTIAL VOLTAGE, ANALOG INPUT MODULE FOR THE PAC SYSTEMS ,16/8 CHANNEL VOLTAGE
    ✓ IN STOCK!
    £1,543.51 Price with VAT: £1,852.21 Buy Surplus As Low As £695.33 Price with VAT: £834.40
    £695.33 Price with VAT: £834.40
    Repair Yours £494.08 Price with VAT: £592.90
    FANUC IC697ADC701

    FANUC

    GE FANUC

    IC697ADC701

    DISCONTINUED BY MANUFACTURER, CIMPLICITY 90, ADC COPROCESSOR, REPEAT SYSTEMS
    ✓ IN STOCK!
    Buy Surplus As Low As £595.19 Price with VAT: £714.23
    £595.19 Price with VAT: £714.23
    Repair Yours £494.01 Price with VAT: £592.81
    FANUC IC697ALG230

    FANUC

    GE FANUC

    IC697ALG230

    DISCONTINUED BY MANUFACTURER, BASE CONVERTER MODULE, 4-20 MA, VOLTAGE/CURRENT, 8 CHANNELS, INDIVIDUALLY CONFIGURABLE FOR VOLTAGE OR CURRENT INPUTS, INDIVIDUAL USER SCALING ON EACH INPUT CHAN ...
    ✓ IN STOCK!
    Buy Surplus As Low As £542.85 Price with VAT: £651.42
    £542.85 Price with VAT: £651.42
    Repair Yours £493.50 Price with VAT: £592.20
    FANUC IC660BBD024

    FANUC

    GE FANUC

    IC660BBD024

    DISCONTINUED BY MANUFACTURER, I/O MODULE, GENIUS BLOCK, SOURCE I/O BLOCK, 32 CIRCUIT, 12/24 VDC POWER, FOR USE WITH 2/3 WIRE SENSORS
    ✓ IN STOCK!
    Buy Surplus As Low As £587.28 Price with VAT: £704.74
    £587.28 Price with VAT: £704.74
    Repair Yours £486.00 Price with VAT: £583.20
    FANUC IC693PCM301

    FANUC

    GE FANUC

    IC693PCM301

    DISCONTINUED BY MANUFACTURER, PROGRAMMABLE CO-PROCESSOR MODULE, 192 KBYTE, SERIES 90-30, SUPPORTS MODBUS RTU
    ✓ IN STOCK!
    Buy Surplus As Low As £559.26 Price with VAT: £671.11
    £559.26 Price with VAT: £671.11
    Repair Yours £484.53 Price with VAT: £581.44
    FANUC IC630MDL310

    FANUC

    GE FANUC

    IC630MDL310

    DISCONTINUED BY MANUFACTURER, COUNTER MODULE, HIGH SPEED COUNTER
    ✓ IN STOCK!
    Buy Surplus As Low As £544.89 Price with VAT: £653.87
    £544.89 Price with VAT: £653.87
    Repair Yours £423.35 Price with VAT: £508.02
    FANUC IC687BEM731

    FANUC

    GE FANUC

    IC687BEM731

    DISCONTINUED BY MANUFACTURER, BUS CONTROLLER, SINGLE SLOT, GENIUS, 1 CHANNEL, GE RX7I BUS CONTROLLER, 1.3 AMP, 5 V DC
    ✓ IN STOCK!
    Buy Surplus As Low As £578.13 Price with VAT: £693.76
    £578.13 Price with VAT: £693.76
    Repair Yours £479.85 Price with VAT: £575.82
    FANUC IC200ALG327

    FANUC

    GE FANUC

    IC200ALG327

    OUTPUT MODULE, VERSAMAX, ANALOG, 12 POINT, 13 BIT, VOLTAGE, +/-10 VDC / 0-10 VDC
    ✓ IN STOCK!
    £1,763.80 Price with VAT: £2,116.56 Buy Surplus As Low As £879.97 Price with VAT: £1,055.96
    £879.97 Price with VAT: £1,055.96
    Repair Yours £468.11 Price with VAT: £561.73
    Previous Next
    1 2 3 4 5 6 7 8 9