SEARCH NOW FOR ALL YOUR GE FANUC SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
FANUC
GE FANUC
8115-DO-DC
DIGITAL OUTPUT, 8-CHANNEL, 2-60 VDC NON-ISOLATED, MODULE POWERED
✓ IN STOCK!
£558.98
Price with VAT:
£670.78
FANUC
GE FANUC
8123-PI-QU
DISCONTINUED BY MANUFACTURER, INPUT MODULE, PULSE, 4 CHANNEL
✓ IN STOCK!
£351.93
Price with VAT:
£422.32
FANUC
GE FANUC
IC693BEM335
DISCONTINUED BY MANUFACTURER, INTERFACE MODULE, REMOTE FIP, 2.5 MHZ
✓ IN STOCK!
£1,086.32
Price with VAT:
£1,303.58
FANUC
GE FANUC
IC693PRG301
DISCONTINUED BY MANUFACTURER, HAND HELD PROGRAMMER (HHP), CONFIGURE PLC AND I/O PARAMETERS, CONNECTS TO CPU THROUGH 15-PIN D TYPE CONNECTOR, SERIES 90-30
✓ IN STOCK!
£966.32
Price with VAT:
£1,159.58
FANUC
GE FANUC
IC694BEM340
BUS CONTROLLER, FIP 1.0, PACSYSTEMS RX3I
✓ IN STOCK!
£1,233.87
Price with VAT:
£1,480.64
FANUC
GE FANUC
IC210EPS001
PROFIBUS-DP SLAVE COMMUNICATIONS EXPANSION MODULE, 24VDC POWER SOURCE, 80MA
✓ IN STOCK!
£116.90
Price with VAT:
£140.28
FANUC
GE FANUC
IC694MDL635
INPUT MODULE, INPUT VOLTAGE 0-150 VDC, 1.97 MA, 16 INPUTS
✓ IN STOCK!
£437.21
Price with VAT:
£524.65
FANUC
GE FANUC
IC200CHS211
I/O INTERPOSING RELAY BASE, REPLACEABLE RELAYS, NON-INTEGRATED, 16 POINT, 24 VDC INPUT FROM MDL 740/750, 5/24/125 VDC OR 120/240 VAC OUTPUT, REMOVABLE TERMINAL CONNECTORS, REQUIRES IC200CHS0 ...
✓ IN STOCK!
£389.97
Price with VAT:
£467.96
FANUC
GE FANUC
IC754VBF12CTD
DISCONTINUED BY MANUFACTURER, OPERATOR INTERFACE, QUICK PANEL VIEW, 12 INCH, TFT, COLOR, TOUCH, 64/64MB
✓ IN STOCK!
£4,697.02
Price with VAT:
£5,636.42
FANUC
GE FANUC
IC754VGI08CTD
DISCONTINUED BY MANUFACTURER, OPERATOR INTERFACE, QUICK PANEL VIEW, 8 INCH, COLOR, TOUCHSCREEN
✓ IN STOCK!
£1,753.21
Price with VAT:
£2,103.85
FANUC
GE FANUC
IC754VBF08CTD
DISCONTINUED BY MANUFACTURER, OPERATOR INTERFACE, QUICKPANEL VIEW, MODEL: ES0822, 8 INCH, COLOR, TFT, LOADED, TOUCH, RATINGS: 24 VDC 1 AMP 24 WATTS TYPICAL, TEMPERATURE RATING: SURR. AIR 60C ...
✓ IN STOCK!
£3,255.95
Price with VAT:
£3,907.14
FANUC
GE FANUC
IC694MDL658
INPUT MODULE, 48 VDC, POSITIVE/NEGATIVE LOGIC, 32 POINT FAST, WIRING TERMINATION IS TWO FUJITSU CONNECTORS
✓ IN STOCK!
£349.91
Price with VAT:
£419.89
FANUC
GE FANUC
IC754VGI06STD
DISCONTINUED BY MANUFACTURER, OPERATOR INTERFACE, QUICKPANEL VIEW, 6 INCH, TOUCHSCREEN, 24 V DC, 0.5 AMP, 12 W
✓ IN STOCK!
£1,974.86
Price with VAT:
£2,369.83
FANUC
GE FANUC
IC210BAR020
DISCONTINUED BY MANUFACTURER, AC (85 TO 264VAC) POWER SOURCE, (12) AC IN/8 OUT (RELAY, 8 AMP), EXPANDABLE, WITH WITHOUT LCD/KEYPAD
✓ IN STOCK!
£123.26
Price with VAT:
£147.91
FANUC
GE FANUC
IC210CBL002
DISCONTINUED BY MANUFACTURER, TRANSFER CABLE, PDA TO DURUS CONTROLLERS
✓ IN STOCK!
£36.05
Price with VAT:
£43.26
FANUC
GE FANUC
IC210DAR012
CONTROLLER, 24 VOLTS AC POWER SOURCE, INPUT; 8X AC, OUTPUT; 4 X RELAY 8A, EXPANDABLE, WITH LCD/KEYPAD
✓ IN STOCK!
£99.69
Price with VAT:
£119.63
Repair Yours
Contact Us
FANUC
GE FANUC
IC210EDS001
DEVICENET SLAVE COMMUNICATIONS EXPANSION MODULE, 24V DC POWER SOURCE, 50MA
✓ IN STOCK!
£116.90
Price with VAT:
£140.28
FANUC
GE FANUC
IC210NDR024
24V DC POWER SOURCE, (12) 24VDC IN/8 OUT (RELAY, 8 AMP), (4) ANALOG INPUTS. NOT EXPANDABLE,NO LCD/KEYPAD, NO COVER.
✓ IN STOCK!
£42.15
Price with VAT:
£50.58
Repair Yours
Contact Us
FANUC
GE FANUC
IC695PRS015
PRESSURE TRANSDUCER MODULE, 0.7AMP @ 3.3 VDC, 0.115AMP @ 5 VDC, SERIAL PORT COMMUNICATION, UP TO 15 HONEYWELL LG1237 SMART PRESSURE TRANSDUCER SENSORS
✓ IN STOCK!
£982.26
Price with VAT:
£1,178.71
FANUC
GE FANUC
IC3603A177AF6
DISCONTINUED BY MANUFACTURER, RELAY, POTTED, COIL: 125VDC, SCREW TERMINAL, 16 POINT
✓ IN STOCK!
£1,151.24
Price with VAT:
£1,381.49
FANUC
GE FANUC
GFK-1179
GE FANUC , GFK-1179, GFK1179, INSTALLATION REQUIREMENTS, FOR CONFORMANCE TO STANDARDS
✓ IN STOCK!
£19.54
Price with VAT:
£23.45
FANUC
GE FANUC
IC660EBD022
DISCONTINUED BY MANUFACTURER, ELECTRONIC ASSEMBLY FOR GENIUS I/O BLOCK, FOR IC660BBD022, 24 VDC, SOURCE I/O, 16 CIRCUIT
✓ IN STOCK!
£305.77
Price with VAT:
£366.92
GENERAL ELECTRIC
44B399267-001
DISCONTINUED BY MANUFACTURER, CONTROL CARD, REG8 REG8B REG8C, GE 1050, PCB, RESISTIVE NETWORK, SCREW TERMINALS, CNC
✓ IN STOCK!
£702.07
Price with VAT:
£842.48
FANUC
GE FANUC
IS215UCVEM06A
DISCONTINUED BY MANUFACTURER, PC BOARD ASSEMBLY, ETHERNET CONNECTION BOARD, CONTROLLER WITH 2 IS BUS CHANNELS, MARK VI
✓ IN STOCK!
£8,315.34
Price with VAT:
£9,978.41
FANUC
GE FANUC
44A294521-G01
DISCONTINUED BY MANUFACTURER, 44B294195-001, PC BOARD, MIIO1A BOARD, GE 1050HL CONTROL, CNC
✓ IN STOCK!
£346.88
Price with VAT:
£416.26
FANUC
GE FANUC
44A294523-G01
DISCONTINUED BY MANUFACTURER, 44B294197-001, PC BOARD, MIC1B BOARD, GE 1050HL CONTROL, CNC
✓ IN STOCK!
£331.56
Price with VAT:
£397.87
FANUC
GE FANUC
IC800VMM04LBKSE25
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, VERSAMOTION, 400 W, 3000 RPM, LOW INERTIA, 2500 PPR INCREMENTAL ENCODER, WITH 24 V DC BRAKE
✓ IN STOCK!
£820.37
Price with VAT:
£984.44
FANUC
GE FANUC
IC800VMM20LBKSE25
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, VERSAMOTION, 2 KW, 3000 RPM, LOW INERTIA, 2500 PPR INCREMENTAL ENCODER, WITH 24 V DC BRAKE
✓ IN STOCK!
£1,019.64
Price with VAT:
£1,223.57
FANUC
GE FANUC
IC800VMM20LNKSE25
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, VERSAMOTION, 2 KW, 3000 RPM, LOW INERTIA, 2500 PPR INCREMENTAL ENCODER
✓ IN STOCK!
£1,068.15
Price with VAT:
£1,281.78
FANUC
GE FANUC
IC800VMMCONP003
DISCONTINUED BY MANUFACTURER, POWER CONNECTOR, VERSAMOTION, 1000-3000 WATTS
✓ IN STOCK!
£34.21
Price with VAT:
£41.05
FANUC
GE FANUC
IC800VMTBC005
DISCONTINUED BY MANUFACTURER, VERSAMOTION AMPLIFIER I/O BREAKOUT TERMINAL BOARD AND 0.5 METER CABLE
✓ IN STOCK!
£156.85
Price with VAT:
£188.22
FANUC
GE FANUC
IC3600TPSF1
DISCONTINUED BY MANUFACTURER, CONVERTER BOARD, 2AMP RATING, 9/5.3V RATING
✓ IN STOCK!
£1,694.38
Price with VAT:
£2,033.26
FANUC
GE FANUC
8110-DI-DC
DIGITAL INPUT, 8-CHANNEL, 24 VDC NON-ISOLATED, MODULE POWERED
✓ IN STOCK!
£230.69
Price with VAT:
£276.83
HITACHI
HCGF4A
DISCONTINUED BY MANUFACTURER, CAPACITOR, 2200MFD, 400V DC, POSITIVE, SURGE 450V DC
✓ IN STOCK!
£18.66
Price with VAT:
£22.39
FANUC
GE FANUC
IC3600TCBA1
DISCONTINUED BY MANUFACTURER, PC BOARD, RELAY
✓ IN STOCK!
£891.29
Price with VAT:
£1,069.55
FANUC
GE FANUC
IC660TBR111
DISCONTINUED BY MANUFACTURER, TERMINAL ASSEMBLY, GENIUS I/O, CONNECTS TO IC660EBR111, FOR IC660BBR111
✓ IN STOCK!
£72.10
Price with VAT:
£86.52
Repair Yours
Contact Us
FANUC
GE FANUC
IC693BEM333
DISCONTINUED BY MANUFACTURER, INTERFACE MODULE, REMOTE FIP, SERIES 90-30
✓ IN STOCK!
£1,086.72
Price with VAT:
£1,304.06
FANUC
GE FANUC
IC697BEM744
DISCONTINUED BY MANUFACTURER, FIP BUS CONTROLLER, RS-485 SERIAL PORT
✓ IN STOCK!
£1,422.50
Price with VAT:
£1,707.00
FANUC
GE FANUC
IC300ADC120
DISCONTINUED BY MANUFACTURER, INPUT MODULE, ANALOG, 4 CHANNEL, 4-20 MA
✓ IN STOCK!
£219.47
Price with VAT:
£263.36
FANUC
GE FANUC
IC693MDL635
DISCONTINUED BY MANUFACTURER, INPUT MODULE, 125 VDC, 16 POINT, POSITIVE/NEGATIVE LOGIC
✓ IN STOCK!
£382.66
Price with VAT:
£459.19
FANUC
GE FANUC
IC694ACC311
TERMINAL BLOCKS, 20 TERMINAL (QTY 6) FOR IC694XX, I/O MODULES ONLY
✓ IN STOCK!
£370.79
Price with VAT:
£444.95
FANUC
GE FANUC
IC754VGF08CTD
DISCONTINUED BY MANUFACTURER, OPERATOR INTERFACE, QUICKPANEL VIEW, 8 INCH, COLOR, TFT, TOUCH, LOADED
✓ IN STOCK!
£820.00
Price with VAT:
£984.00
FANUC
GE FANUC
ZA13B-0154-B001
DISCONTINUED BY MANUFACTURER, I/O LINK ADAPTER, OPTICAL I/O LINK ADAPTER (F15/F0), 4.75-5.25V, 200 MA
✓ IN STOCK!
£78.71
Price with VAT:
£94.45
Repair Yours
Contact Us
FANUC
GE FANUC
IC695ALG312
ISOLATED THERMOCOUPLE INPUT MODULE, 12 ISOLATED DIFFERENTIAL THERMOCOUPLE INPUT CHANNELS, EACH CHANNEL CAN BE INDIVIDUALLY CONFIGURED, THERMOCOUPLE TYPES: J/K/T/E/R/S/B/N/C
✓ IN STOCK!
£3,113.89
Price with VAT:
£3,736.67
FANUC
GE FANUC
IC800VMM20MNKSE25
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, VERSAMOTION, 2 KW, 3000 RPM, MEDIUM INERTIA, 2500 PPR INCREMENTAL ENCODER
✓ IN STOCK!
£872.75
Price with VAT:
£1,047.30
FANUC
GE FANUC
IC754CBF12CTD
DISCONTINUED BY MANUFACTURER, OPERATOR INTERFACE, QUICK PANEL CONTROL, 12 INCH, TFT, COLOR, 64MB/64MB
✓ IN STOCK!
£4,805.46
Price with VAT:
£5,766.55
FANUC
GE FANUC
IC754VBI08CTD
DISCONTINUED BY MANUFACTURER, OPERATOR INTERFACE, 8 INCH, TFT, COLOR, TOUCH, 30 VDC
✓ IN STOCK!
£1,257.96
Price with VAT:
£1,509.55
