Product Search

    SEARCH NOW FOR ALL YOUR HELICAL SOLUTIONS SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 301-350 of 500.
    HELICAL SOLUTIONS 81557

    HELICAL SOLUTIONS

    81557

    SQUARE END MILLS; MILL DIAMETER (DECIMAL INCH): 0.3125 ; MILL DIAMETER (INCH): 5/16 ; NUMBER OF FLUTES: 3 ; END MILL MATERIAL: SOLID CARBIDE ; LENGTH OF CUT (DECIMAL INCH): 1.5625 ; LENGTH O ...
    £60.07 Price with VAT: £72.08 Buy Surplus As Low As £36.34 Price with VAT: £43.61
    £36.34 Price with VAT: £43.61
    HELICAL SOLUTIONS 81567

    HELICAL SOLUTIONS

    81567

    SQUARE END MILL: 3/16" DIA, 7/32" LOC, 3 FLUTES, SOLID CARBIDE 3" OAL, 3/16" SHANK DIA, 45 ° HELIX, SINGLE END, UNCOATED, SERIES END MILLS FOR ALUMINUM - 3 FLUTE - SQUARE - 45 HELIX - REDUCE ...
    £47.46 Price with VAT: £56.95 Buy Surplus As Low As £28.92 Price with VAT: £34.71
    £28.92 Price with VAT: £34.71
    HELICAL SOLUTIONS 81827

    HELICAL SOLUTIONS

    81827

    CORNER RADIUS END MILL: 3/4" DIA, 1-5/8" LOC, 0.0600" RADIUS, 7 FLUTE, SOLID CARBIDE 4" OAL, 3/4" SHANK DIA, APLUS COATED, SINGLE END, SERIES HEV-7 (MOQ=1, PKG QTY=1)
    £250.66 Price with VAT: £300.79 Buy Surplus As Low As £150.54 Price with VAT: £180.65
    £150.54 Price with VAT: £180.65
    HELICAL SOLUTIONS 81898

    HELICAL SOLUTIONS

    81898

    SQUARE END MILL: 3/4" DIA, 2-1/4" LOC, 6 FLUTES, SOLID CARBIDE 5" OAL, 3/4" SHANK DIA, HELIX, SINGLE END, TPLUS COATED, SERIES END MILLS FOR STAINLESS & HIGH TEMP - 6 FLUTE - SQUARE - VARIAB ...
    £324.07 Price with VAT: £388.89 Buy Surplus As Low As £195.04 Price with VAT: £234.04
    £195.04 Price with VAT: £234.04
    HELICAL SOLUTIONS 81994

    HELICAL SOLUTIONS

    81994

    CORNER RADIUS END MILL: 1/4" DIA, 3/4" LOC, 0.0100" RADIUS, 3 FLUTE, SOLID CARBIDE
    £52.65 Price with VAT: £63.18 Buy Surplus As Low As £31.89 Price with VAT: £38.27
    £31.89 Price with VAT: £38.27
    HELICAL SOLUTIONS 82257

    HELICAL SOLUTIONS

    82257

    SQUARE END MILLS; MILL DIAMETER (DECIMAL INCH): 0.3125 ; MILL DIAMETER (INCH): 5/16 ; NUMBER OF FLUTES: 4 ; END MILL MATERIAL: SOLID CARBIDE ; LENGTH OF CUT (DECIMAL INCH): 1.5625 ; LENGTH O ...
    £48.20 Price with VAT: £57.84 Buy Surplus As Low As £28.92 Price with VAT: £34.71
    £28.92 Price with VAT: £34.71
    HELICAL SOLUTIONS 82538

    HELICAL SOLUTIONS

    82538

    CORNER RADIUS END MILL: 1/4" DIA, 1-1/4" LOC, 0.0100" RADIUS, 5 FLUTE, SOLID CARBIDE 3" OAL, 1/4" SHANK DIA, APLUS COATED, SINGLE END, CENTERCUTTING, SERIES HEV-5 (MOQ=1, PKG QTY=1)
    £48.20 Price with VAT: £57.84 Buy Surplus As Low As £28.92 Price with VAT: £34.71
    £28.92 Price with VAT: £34.71
    HELICAL SOLUTIONS 82540

    HELICAL SOLUTIONS

    82540

    CORNER RADIUS END MILL: 1/4" DIA, 1-1/4" LOC, 0.0150" RADIUS, 5 FLUTE, SOLID CARBIDE 3" OAL, 1/4" SHANK DIA, APLUS COATED, SINGLE END, CENTERCUTTING, SERIES HEV-5 (MOQ=1, PKG QTY=1)
    £48.20 Price with VAT: £57.84 Buy Surplus As Low As £28.92 Price with VAT: £34.71
    £28.92 Price with VAT: £34.71
    HELICAL SOLUTIONS 49211

    HELICAL SOLUTIONS

    49211

    BALL END MILL: 3/8" DIA, 1" LOC, 3 FLUTE, SOLID CARBIDE
    £79.35 Price with VAT: £95.22 Buy Surplus As Low As £48.20 Price with VAT: £57.84
    £48.20 Price with VAT: £57.84
    HELICAL SOLUTIONS 49345

    HELICAL SOLUTIONS

    49345

    BALL END MILL: 5/8" DIA, 1-1/4" LOC, 3 FLUTE, SOLID CARBIDE 3-1/2" OAL, 5/8" SHANK DIA, 40 DEG HELIX, BRIGHT/UNCOATED, SINGLE END, SERIES 3 FLUTE, BALL - 400 HELIX, VARIABLE PITCH, END MILLS ...
    £133.48 Price with VAT: £160.18 Buy Surplus As Low As £80.09 Price with VAT: £96.11
    £80.09 Price with VAT: £96.11
    HELICAL SOLUTIONS 50242

    HELICAL SOLUTIONS

    50242

    SQUARE END MILL: 1/2" DIA, 5/8" LOC, 5 FLUTE, SOLID CARBIDE
    £124.59 Price with VAT: £149.50 Buy Surplus As Low As £74.90 Price with VAT: £89.88
    £74.90 Price with VAT: £89.88
    HELICAL SOLUTIONS 53241

    HELICAL SOLUTIONS

    53241

    CORNER RADIUS END MILL: 1/2" DIA, 5/8" LOC, PROPRIETARY, CORNER RADIUS END, CENTERCUTTING SERIES HSV-RN-4
    £184.65 Price with VAT: £221.59 Buy Surplus As Low As £111.24 Price with VAT: £133.49
    £111.24 Price with VAT: £133.49
    HELICAL SOLUTIONS 53256

    HELICAL SOLUTIONS

    53256

    CORNER RADIUS END MILL: 1/2" DIA, 5/8" LOC, PROPRIETARY, CORNER RADIUS END, CENTERCUTTING SERIES HSV-RN-4
    £189.85 Price with VAT: £227.81 Buy Surplus As Low As £114.20 Price with VAT: £137.04
    £114.20 Price with VAT: £137.04
    HELICAL SOLUTIONS 53396

    HELICAL SOLUTIONS

    53396

    CORNER RADIUS END MILL: 1" DIA, 1-1/4" LOC, APLUS COATED, PROPRIETARY, CORNER RADIUS END, CENTERCUTTING SERIES HSV-RN-4 4" OAL, APLUS COATED, CORNER RADIUS END, CENTERCUTTING, SERIES HSV-RN- ...
    £360.41 Price with VAT: £432.49 Buy Surplus As Low As £216.54 Price with VAT: £259.85
    £216.54 Price with VAT: £259.85
    HELICAL SOLUTIONS 56152

    HELICAL SOLUTIONS

    56152

    BALL END MILL: 1/4" DIA, 3/4" LOC, 4 FLUTE, SOLID CARBIDE
    £51.17 Price with VAT: £61.40 Buy Surplus As Low As £31.15 Price with VAT: £37.38
    £31.15 Price with VAT: £37.38
    HELICAL SOLUTIONS 56542

    HELICAL SOLUTIONS

    56542

    BALL END MILL: 1/2" DIA, 1-5/8" LOC, 4 FLUTE(S), SOLID CARBIDE
    £131.26 Price with VAT: £157.51 Buy Surplus As Low As £79.35 Price with VAT: £95.22
    £79.35 Price with VAT: £95.22
    HELICAL SOLUTIONS 56602

    HELICAL SOLUTIONS

    56602

    BALL END MILL: 5/8" DIA, 2" LOC, 4 FLUTE, SOLID CARBIDE
    £194.29 Price with VAT: £233.15 Buy Surplus As Low As £117.17 Price with VAT: £140.60
    £117.17 Price with VAT: £140.60
    HELICAL SOLUTIONS 56707

    HELICAL SOLUTIONS

    56707

    BALL END MILL: 1" DIA, 1-1/2" LOC, 4 FLUTE, SOLID CARBIDE 4" OAL, 1" SHANK DIA, APLUS COATED, SINGLE END, SERIES 4 FLUTE, BALL - VARIABLE PITCH (APLUS), END MILLS FOR STEELS, TOOL STEELS, & ...
    £337.42 Price with VAT: £404.90 Buy Surplus As Low As £202.45 Price with VAT: £242.94
    £202.45 Price with VAT: £242.94
    HELICAL SOLUTIONS 57362

    HELICAL SOLUTIONS

    57362

    BALL END MILL: 3/4" DIA, 1" LOC, 4 FLUTE, SOLID CARBIDE 6" OAL, 3/4" SHANK DIA, APLUS COATED, SINGLE END, SERIES 4 FLUTE, BALL - VARIABLE PITCH, REDUCED NECK (APLUS), END MILLS FOR STEELS, T ...
    £309.24 Price with VAT: £371.09 Buy Surplus As Low As £186.14 Price with VAT: £223.36
    £186.14 Price with VAT: £223.36
    HELICAL SOLUTIONS 59023

    HELICAL SOLUTIONS

    59023

    CORNER RADIUS END MILL: 3/16" DIA, 5/16" LOC, 0.0300" RADIUS, 3 FLUTE, SOLID CARBIDE
    £28.92 Price with VAT: £34.71 Buy Surplus As Low As £17.80 Price with VAT: £21.36
    £17.80 Price with VAT: £21.36
    HELICAL SOLUTIONS 59039

    HELICAL SOLUTIONS

    59039

    CORNER RADIUS END MILL: 1/4" DIA, 3/8" LOC, 0.0300" RADIUS, 3 FLUTE, SOLID CARBIDE
    £34.11 Price with VAT: £40.94 Buy Surplus As Low As £20.76 Price with VAT: £24.92
    £20.76 Price with VAT: £24.92
    HELICAL SOLUTIONS 59087

    HELICAL SOLUTIONS

    59087

    CORNER RADIUS END MILL: 3/8" DIA, 1/2" LOC, 0.0300" RADIUS, 3 FLUTE, SOLID CARBIDE 2" OAL, 3/8" SHANK DIA, 35 DEG HELIX, ZPLUS COATED, SINGLE END, CENTERCUTTING, SERIES H35AL-3 (MOQ=1, PKG Q ...
    £38.56 Price with VAT: £46.27 Buy Surplus As Low As £23.73 Price with VAT: £28.48
    £23.73 Price with VAT: £28.48
    HELICAL SOLUTIONS 59097

    HELICAL SOLUTIONS

    59097

    CORNER RADIUS END MILL: 3/8" DIA, 1" LOC, 35 DEG HELIX, ZPLUS FINISH, PROPRIETARY, CORNER RADIUS END, CENTERCUTTING SERIES H35AL-3
    £50.43 Price with VAT: £60.51 Buy Surplus As Low As £30.40 Price with VAT: £36.49
    £30.40 Price with VAT: £36.49
    HELICAL SOLUTIONS 59099

    HELICAL SOLUTIONS

    59099

    CORNER RADIUS END MILL: 3/8" DIA, 1" LOC, 0.0600" RADIUS, 3 FLUTE, SOLID CARBIDE
    £50.43 Price with VAT: £60.51 Buy Surplus As Low As £30.40 Price with VAT: £36.49
    £30.40 Price with VAT: £36.49
    HELICAL SOLUTIONS 59103

    HELICAL SOLUTIONS

    59103

    CORNER RADIUS END MILL: 3/8" DIA, 1-1/4" LOC, 0.0150" RADIUS, 3 FLUTE, SOLID CARBIDE
    £66.00 Price with VAT: £79.20 Buy Surplus As Low As £40.05 Price with VAT: £48.05
    £40.05 Price with VAT: £48.05
    HELICAL SOLUTIONS 59118

    HELICAL SOLUTIONS

    59118

    CORNER RADIUS END MILL: 1/2" DIA, 5/8" LOC, 0.0600" RADIUS, 3 FLUTE, SOLID CARBIDE
    £62.29 Price with VAT: £74.75 Buy Surplus As Low As £37.82 Price with VAT: £45.38
    £37.82 Price with VAT: £45.38
    HELICAL SOLUTIONS 59119

    HELICAL SOLUTIONS

    59119

    CORNER RADIUS END MILL: 1/2" DIA, 5/8" LOC, 0.0600" RADIUS, 3 FLUTE, SOLID CARBIDE
    £70.45 Price with VAT: £84.54 Buy Surplus As Low As £42.27 Price with VAT: £50.72
    £42.27 Price with VAT: £50.72
    HELICAL SOLUTIONS 59151

    HELICAL SOLUTIONS

    59151

    CORNER RADIUS END MILL: 1/2" DIA, 1-1/4" LOC, 0.1250" RADIUS, 3 FLUTE, SOLID CARBIDE
    £76.38 Price with VAT: £91.66 Buy Surplus As Low As £45.98 Price with VAT: £55.17
    £45.98 Price with VAT: £55.17
    HELICAL SOLUTIONS 59187

    HELICAL SOLUTIONS

    59187

    CORNER RADIUS END MILL: 5/8" DIA, 2-1/8" LOC, 0.0600" RADIUS, 3 FLUTE, SOLID CARBIDE
    £165.37 Price with VAT: £198.45 Buy Surplus As Low As £99.37 Price with VAT: £119.25
    £99.37 Price with VAT: £119.25
    HELICAL SOLUTIONS 59205

    HELICAL SOLUTIONS

    59205

    CORNER RADIUS END MILL: 3/4" DIA, 1-5/8" LOC, 0.1250" RADIUS, 3 FLUTE, SOLID CARBIDE 4" OAL, 3/4" SHANK DIA, 35 DEG HELIX, ZPLUS COATED, SINGLE END, CENTERCUTTING, SERIES H35AL-3 (MOQ=1, PKG ...
    £176.50 Price with VAT: £211.80 Buy Surplus As Low As £106.05 Price with VAT: £127.26
    £106.05 Price with VAT: £127.26
    HELICAL SOLUTIONS 59211

    HELICAL SOLUTIONS

    59211

    CORNER RADIUS END MILL: 3/4" DIA, 2-1/4" LOC, 0.0300" RADIUS, 3 FLUTE, SOLID CARBIDE
    £252.88 Price with VAT: £303.46 Buy Surplus As Low As £152.02 Price with VAT: £182.43
    £152.02 Price with VAT: £182.43
    HELICAL SOLUTIONS 59282

    HELICAL SOLUTIONS

    59282

    CORNER RADIUS END MILL: 1/4" DIA, 3/8" LOC, 0.0600" RADIUS, 6 FLUTE, SOLID CARBIDE
    £43.75 Price with VAT: £52.50 Buy Surplus As Low As £26.70 Price with VAT: £32.04
    £26.70 Price with VAT: £32.04
    HELICAL SOLUTIONS 59405

    HELICAL SOLUTIONS

    59405

    CORNER RADIUS END MILL: 1/2" DIA, 1" LOC, 0.03" RADIUS, 5 FLUTES, SOLID CARBIDE
    £111.98 Price with VAT: £134.37 Buy Surplus As Low As £67.48 Price with VAT: £80.98
    £67.48 Price with VAT: £80.98
    HELICAL SOLUTIONS 59406

    HELICAL SOLUTIONS

    59406

    CORNER RADIUS END MILL: 1/2" DIA, 1-1/4" LOC, 0.03" RADIUS, 5 FLUTES, SOLID CARBIDE
    £114.95 Price with VAT: £137.93 Buy Surplus As Low As £68.97 Price with VAT: £82.76
    £68.97 Price with VAT: £82.76
    HELICAL SOLUTIONS 59414

    HELICAL SOLUTIONS

    59414

    CORNER RADIUS END MILL: 3/4" DIA, 1-5/8" LOC, PROPRIETARY, CORNER RADIUS END, CENTERCUTTING SERIES HEV-C-5
    £291.44 Price with VAT: £349.73 Buy Surplus As Low As £175.01 Price with VAT: £210.02
    £175.01 Price with VAT: £210.02
    HELICAL SOLUTIONS 59427

    HELICAL SOLUTIONS

    59427

    CORNER RADIUS END MILL: 1/2" DIA, 1" LOC, 0.0300" RADIUS, 7 FLUTE, SOLID CARBIDE
    £119.39 Price with VAT: £143.27 Buy Surplus As Low As £71.93 Price with VAT: £86.32
    £71.93 Price with VAT: £86.32
    HELICAL SOLUTIONS 59448

    HELICAL SOLUTIONS

    59448

    BALL END MILL: 0.5000" DIA, 1.2500" LOC, 6 FLUTE, SOLID CARBIDE
    £118.65 Price with VAT: £142.38 Buy Surplus As Low As £71.19 Price with VAT: £85.43
    £71.19 Price with VAT: £85.43
    HELICAL SOLUTIONS 59449

    HELICAL SOLUTIONS

    59449

    BALL END MILL: 0.5000" DIA, 1.6250" LOC, 6 FLUTE, SOLID CARBIDE
    £135.71 Price with VAT: £162.85 Buy Surplus As Low As £81.57 Price with VAT: £97.89
    £81.57 Price with VAT: £97.89
    HELICAL SOLUTIONS 59810

    HELICAL SOLUTIONS

    59810

    CHAMFER MILL: 3/8" DIA, 3 FLUTES, SOLID CARBIDE
    £52.65 Price with VAT: £63.18 Buy Surplus As Low As £31.89 Price with VAT: £38.27
    £31.89 Price with VAT: £38.27
    HELICAL SOLUTIONS 59813

    HELICAL SOLUTIONS

    59813

    CHAMFER MILLS; INCLUDED ANGLE: 100.00 ; CHAMFER MILL MATERIAL: SOLID CARBIDE ; COATING/FINISH: APLUS ; CUTTER HEAD DIAMETER (DECIMAL INCH): 0.3750 ; NUMBER OF FLUTES: 5 ; END TYPE: SINGLE
    £53.39 Price with VAT: £64.07 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    HELICAL SOLUTIONS 81438

    HELICAL SOLUTIONS

    81438

    CORNER RADIUS END MILL: 3/8" DIA, 0.3750" DIA, 0.7500" LOC, 0.0150" RADIUS, 3 FLUTE, SOLID CARBIDE 2-1/2" OAL, 0.3750" SHANK DIA, ZPLUS COATED, CORNER RADIUS END, CENTERCUTTING, SERIES H40AL ...
    £51.91 Price with VAT: £62.29 Buy Surplus As Low As £31.15 Price with VAT: £37.38
    £31.15 Price with VAT: £37.38
    HELICAL SOLUTIONS 81574

    HELICAL SOLUTIONS

    81574

    SQUARE END MILL: 0.3750" DIA, 0.5" LOC, 0.375" SHANK DIA, 4" OAL, 3 FLUTES, SOLID CARBIDE SINGLE END, RIGHT HAND FLUTE, HELICAL FLUTE, 45 DEG HELIX, RIGHT HAND CUT, SERIES END MILLS FOR ALUM ...
    £74.16 Price with VAT: £88.99 Buy Surplus As Low As £44.50 Price with VAT: £53.39
    £44.50 Price with VAT: £53.39
    HELICAL SOLUTIONS 81609

    HELICAL SOLUTIONS

    81609

    CORNER RADIUS END MILL: 3/8" DIA, 1-1/4" LOC, 0.0600" RADIUS, 3 FLUTE, SOLID CARBIDE 3-1/2" OAL, 3/8" SHANK DIA, 45 DEG HELIX, BRIGHT/UNCOATED, SINGLE END, CENTERCUTTING, SERIES H45AL-3 (MOQ ...
    £52.65 Price with VAT: £63.18 Buy Surplus As Low As £31.89 Price with VAT: £38.27
    £31.89 Price with VAT: £38.27
    HELICAL SOLUTIONS 81773

    HELICAL SOLUTIONS

    81773

    CORNER RADIUS END MILL: 3/4" DIA, 1-5/8" LOC, 0.0150" RADIUS, 5 FLUTE, SOLID CARBIDE 4" OAL, 3/4" SHANK DIA, APLUS COATED, SINGLE END, CENTERCUTTING, SERIES HEV-5 (MOQ=1, PKG QTY=1)
    £250.66 Price with VAT: £300.79 Buy Surplus As Low As £150.54 Price with VAT: £180.65
    £150.54 Price with VAT: £180.65
    HELICAL SOLUTIONS 81869

    HELICAL SOLUTIONS

    81869

    CORNER RADIUS END MILL: 1/2" DIA, 5/8" LOC, 0.0900" RADIUS, 5 FLUTE, SOLID CARBIDE 2-1/2" OAL, 1/2" SHANK DIA, TPLUS COATED, SINGLE END, CENTERCUTTING, SERIES HEV-5 (MOQ=1, PKG QTY=1)
    £99.37 Price with VAT: £119.25 Buy Surplus As Low As £60.07 Price with VAT: £72.08
    £60.07 Price with VAT: £72.08
    HELICAL SOLUTIONS 82542

    HELICAL SOLUTIONS

    82542

    CORNER RADIUS END MILL: 1/4" DIA, 1-1/2" LOC, 0.0300" RADIUS, 5 FLUTE, SOLID CARBIDE 3" OAL, 1/4" SHANK DIA, APLUS COATED, SINGLE END, CENTERCUTTING, SERIES HEV-5 (MOQ=1, PKG QTY=1)
    £51.17 Price with VAT: £61.40 Buy Surplus As Low As £31.15 Price with VAT: £37.38
    £31.15 Price with VAT: £37.38
    HELICAL SOLUTIONS 82545

    HELICAL SOLUTIONS

    82545

    CORNER RADIUS END MILL: 5/16" DIA, 1-1/4" LOC, 0.0300" RADIUS, 5 FLUTE, SOLID CARBIDE 3" OAL, 5/16" SHANK DIA, APLUS COATED, SINGLE END, CENTERCUTTING, SERIES HEV-5 (MOQ=1, PKG QTY=1)
    £63.03 Price with VAT: £75.64 Buy Surplus As Low As £37.82 Price with VAT: £45.38
    £37.82 Price with VAT: £45.38
    HELICAL SOLUTIONS 82574

    HELICAL SOLUTIONS

    82574

    CORNER RADIUS END MILL: 3/8" DIA, 3/4" LOC, 0.0600" RADIUS, 6 FLUTE, SOLID CARBIDE 2-1/2" OAL, 3/8" SHANK DIA, APLUS COATED, SINGLE END, CENTERCUTTING, SERIES HEV-6 (MOQ=1, PKG QTY=1)
    £62.29 Price with VAT: £74.75 Buy Surplus As Low As £37.82 Price with VAT: £45.38
    £37.82 Price with VAT: £45.38
    HELICAL SOLUTIONS 82665

    HELICAL SOLUTIONS

    82665

    HIGH-FEED END MILLS; MILL DIAMETER (DECIMAL INCH): 0.1250; MILL DIAMETER (INCH): 1/8; PROGRAM RADIUS (DECIMAL INCH): 0.0157; NUMBER OF FLUTES: 4; MATERIAL: SOLID CARBIDE; FINISH/COATING: TPL ...
    £76.38 Price with VAT: £91.66 Buy Surplus As Low As £45.98 Price with VAT: £55.17
    £45.98 Price with VAT: £55.17
    HELICAL SOLUTIONS 82669

    HELICAL SOLUTIONS

    82669

    HIGH-FEED END MILLS; MILL DIAMETER (DECIMAL INCH): 0.2500; MILL DIAMETER (INCH): 1/4; PROGRAM RADIUS (DECIMAL INCH): 0.0314; NUMBER OF FLUTES: 5; MATERIAL: SOLID CARBIDE; FINISH/COATING: TPL ...
    £98.63 Price with VAT: £118.36 Buy Surplus As Low As £59.33 Price with VAT: £71.19
    £59.33 Price with VAT: £71.19
    Previous Next
    1 2 3 4 5 6 7 8 9 10