SEARCH NOW FOR ALL YOUR IDC USA SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
IDC USA
SH-3/4
DISCONTINUED BY MANUFACTURER, BUSHING, SH SERIES, QD STYLE, BORE TYPE FINISHED W/ KEYWAY, BORE DIAMETER 3/4', FLANGE THICKNESS 7/16', CAST IRON MATERIAL
✓ IN STOCK!
£16.11
Price with VAT:
£19.34
IDC USA
SK-32MM
DISCONTINUED BY MANUFACTURER, 32MM, QD BUSHING
✓ IN STOCK!
£10.57
Price with VAT:
£12.68
IDC USA
SK-38MM
IDC USA, SK-38MM, SK38MM, QD BUSHING, 38MM BORE
✓ IN STOCK!
£24.41
Price with VAT:
£29.29
IDC USA
SO6-F
FINE THREAD IDLER SHAFT, 1.5" DIAMETER, 1-14 THREADED END, SAME AS GOLD SPEC GS-SO6
£46.42
Price with VAT:
£55.70
IDC USA
SSER12
STAINLESS STEEL INSERT W/SNAP RING, SET SCREWS 120 DEGRESS APART, LUBRICATION GROOVE WITH HOLE OPPOSITE SET SCREW SIDE
✓ IN STOCK!
£50.90
Price with VAT:
£61.08
IDC USA
SSR10
BEARING, DEEP GROOVE BALL BEARING, STAINLESS STEEL, 0.625" BORE DIA., 1.375" OUTSIDE DIA., 0.28125" WIDTH
£28.73
Price with VAT:
£34.48
IDC USA
SSUC206-19G
DISCONTINUED BY MANUFACTURER, BALL INSERT BEARING, ROUND BORE, 1.1875 INCH ID, 2.4409 INCH OD, SET SCREW LOCKING
£28.73
Price with VAT:
£34.48
IDC USA
SSUC206-20G
BALL BEARING INSERT, STAINLESS STEEL, 1.25 IN SHAFT, 2.4409 IN OD
✓ IN STOCK!
£12.82
Price with VAT:
£15.38
IDC USA
TL22H100-1610
IDC USA , TL22H100-1610 , TL22H1001610 , TAPER-LOCK TIMING PULLEY , 1/2 INCH PITCH [H] FOR 1.0", 2" AND 3" WIDE BELTS , CF TYPE , 22 TEETH , 3.501 DIA. PITCH , 3.447 OD PULLEY , 3-3/4 OD FLA ...
✓ IN STOCK!
£22.28
Price with VAT:
£26.74
IDC USA
UC204-20MMG
BALL BEARING, INSERT, 20 MM SHAFT DIAMETER, 12900 N DYNAMIC LOAD, 6272 N STATIC LOAD
£8.10
Price with VAT:
£9.73
IDC USA
UC205-25MMG
INSERT BEARING, W/ SET SCREWS, 25MM BORE, 52MM OD, 17MM OUTER RING WIDTH
✓ IN STOCK!
£13.43
Price with VAT:
£16.12
IDC USA
UC206-19G
DISCONTINUED BY MANUFACTURER, BALL INSERT BEARING, ROUND BORE, 1.1875 INCH ID, 2.4409 INCH OD, SET SCREW LOCKING
£22.10
Price with VAT:
£26.52
IDC USA
UC208-24G
BALL BEARING INSERT, TRIPLE LIP SEAL SET SCREW LOCKING
£19.16
Price with VAT:
£22.99
IDC USA
UCF206-20
FLANGE-MOUNT BALL BEARING UNIT,FOUR-BOLT FLANGE, 1.2500 IN BORE, CAST IRON HOUSING, STANDARD DUTY, SET SCREW LOCKING, CONTACT WITH FLINGER
£21.37
Price with VAT:
£25.64
IDC USA
UCF207-23
FLANGE BEARING, 4 BOLT, UCF, FLANGE MOUNT, SET SCREW LOCK, CAST IRON HOUSING, NON-EXPANSION (FIXED), STANDARD DUTY, FLINGER SEAL, 1-7/16 INCH BORE, 4-39/64 INCH LENGTH
£25.30
Price with VAT:
£30.36
IDC USA
UCF210-50MM
BALL BEARING UNIT, FLANGE-MOUNT, 50 MM BORE, 4-BOLT FLANGE MOUNT, SET SCREW LOCKING, CAST IRON HOUSING MATERIAL, NON-EXPANSION BEARING (FIXED), STANDARD DUTY
✓ IN STOCK!
£73.48
Price with VAT:
£88.17
IDC USA
UCF212-38
BEARING, 4-BOLT FLANGE UNIT, W/ SET SCREWS, 2-3/8", STATIC 8138 LBF / DYNAMIC 11780 LBF
£108.31
Price with VAT:
£129.97
IDC USA
UCFL205-16
BALL BEARING UNIT, FLANGE-MOUNT, TWO-BOLT FLANGE, 1.0000 IN BORE, CAST IRON HOUSING, STANDARD DUTY, SET SCREW LOCKING, CONTACT WITH FLINGER
✓ IN STOCK!
£16.60
Price with VAT:
£19.92
IDC USA
UCFL205-25MM
BALL BEARING, 2 BOLT, FLANGE MOUNT, 25MM BORE, CAST IRON
✓ IN STOCK!
£22.24
Price with VAT:
£26.68
IDC USA
UCFL206-20
FLANGE-MOUNT BALL BEARING UNIT, TWO-BOLT FLANGE, 1.2500 IN BORE, CAST IRON HOUSING, STANDARD DUTY, SET SCREW LOCKING, CONTACT SEAL
✓ IN STOCK!
£7.17
Price with VAT:
£8.60
IDC USA
UCFL206-30MM
2-BOLT FLANGE, SET SCREW LOCK, 30MM BORE
✓ IN STOCK!
£14.57
Price with VAT:
£17.49
IDC USA
UCFL208-40MM
FLANGE BEARING, 40MM BORE, 2BOLT, NORMAL DUTY, SET SCREW
£26.79
Price with VAT:
£32.15
IDC USA
UCFX07-23
FLANGE W/ BEARING, FOUR-BOLT SET SCREW LOCKING, 1-1/2IN BORE
✓ IN STOCK!
£9.95
Price with VAT:
£11.94
IDC USA
UCFX15-48
FLANGE BEARING, 4 BOLT, MEDIUM DUTY, SET SCREW LOCKING DESIGN, 3 INCH SHAFT DIAMETER, ONE-PIECE CAST IRON HOUSING, WIDE INNER RING BEARING, DUAL HD SLINGER-TYPE CONTACT SEALS, CUP POINT SET ...
£136.30
Price with VAT:
£163.56
IDC USA
UCP205-16
PILLOW BLOCK, HIGH CENTER, 1IN BORE, SET SCREWS
✓ IN STOCK!
£9.82
Price with VAT:
£11.79
IDC USA
UCP207-23
BEARING, IDC SELECT, PILLOW BLOCK, STANDARD DUTY, 2-BOLT, SET SCREW MOUNT
✓ IN STOCK!
£20.45
Price with VAT:
£24.53
IDC USA
UCP208-24
PILLOW BLOCK BALL BEARING UNIT,TWO-BOLT BASE, 1.5000 IN ID, ROUND BORE, CAST IRON, NORMAL DUTY, NON-EXPANSION BEARING (FIXED)
£11.79
Price with VAT:
£14.15
IDC USA
UCP210-32
PILLOW BLOCK BALL BEARING UNIT, 36UZ27, TWO-BOLT BASE, 2.0000 IN BORE, CAST IRON MATERIAL, STANDARD DUTY, NON-EXPANSION BEARING (FIXED)
✓ IN STOCK!
£19.66
Price with VAT:
£23.59
IDC USA
UCPSS204-12SS
IDC USA , UCPSS204-12SS, UCPSS20412SS, PILLOW BLOCK BEARING , 2BOLT FLANGE
✓ IN STOCK!
£21.79
Price with VAT:
£26.14
IDC USA
UCPX15-47
PILLOW BLOCK BEARING, 2-BOLT BASE, 2-15/16 INCH BORE, CAST IRON HOUSING, MEDIUM DUTY, NON-EXPANSION BEARING
£194.51
Price with VAT:
£233.41
