Product Search

    SEARCH NOW FOR ALL YOUR KENNAMETAL SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Machine Parts / Assembly for Machine

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 1-50 of 145.
    KENNAMETAL MCLNL165C

    KENNAMETAL

    MCLNL165C

    KENNAMETAL, MCLNL165C, TURNING TOOLHOLDER, GAUGE INSERT, HEX 1/8IN,
    ✓ IN STOCK!
    £94.46 Price with VAT: £113.35 Buy Surplus As Low As £91.57 Price with VAT: £109.88
    £91.57 Price with VAT: £109.88
    KENNAMETAL SNMG434

    KENNAMETAL

    SNMG434

    CHIP CONTROL INSERT, SNMG120416B, PRICE/EACH
    ✓ IN STOCK!
    £19.96 Price with VAT: £23.95 Buy Surplus As Low As £11.33 Price with VAT: £13.59
    £11.33 Price with VAT: £13.59
    KENNAMETAL CP1638507

    KENNAMETAL

    CP1638507

    DISCONTINUED BY MANUFACTURER, COUNTERSINKING TOOL
    ✓ IN STOCK!
    Buy Surplus As Low As £85.42 Price with VAT: £102.50
    £85.42 Price with VAT: £102.50
    KENNAMETAL 241182R02-KC720

    KENNAMETAL

    241182R02-KC720

    INSERT HSS GRADE KC720 MACHINE TOOL THREADER
    £17.38 Price with VAT: £20.86 Buy Surplus As Low As £9.07 Price with VAT: £10.88
    £9.07 Price with VAT: £10.88
    KENNAMETAL RNMG-43SGP

    KENNAMETAL

    RNMG-43SGP

    INSERT CARBIDE STYLE RNMG 43
    £12.85 Price with VAT: £15.42 Buy Surplus As Low As £8.31 Price with VAT: £9.98
    £8.31 Price with VAT: £9.98
    KENNAMETAL 047-3-020DET2

    KENNAMETAL

    047-3-020DET2

    CARBDE INSERT 1-1/4IN LATHE GROOVING TOOL HOLDER
    £35.52 Price with VAT: £42.62 Buy Surplus As Low As £21.91 Price with VAT: £26.30
    £21.91 Price with VAT: £26.30
    KENNAMETAL NRL-163C

    KENNAMETAL

    NRL-163C

    TOOL HOLDER 1IN
    £64.23 Price with VAT: £77.08 Buy Surplus As Low As £38.54 Price with VAT: £46.25
    £38.54 Price with VAT: £46.25
    Repair Yours Contact Us
    KENNAMETAL DDPNN-164D

    KENNAMETAL

    DDPNN-164D

    TOOL HOLDER TYPE D 6IN LENGTH 1IN SHANK
    £48.36 Price with VAT: £58.04 Buy Surplus As Low As £29.47 Price with VAT: £35.37
    £29.47 Price with VAT: £35.37
    KENNAMETAL DSSNL-124B

    KENNAMETAL

    DSSNL-124B

    TOOL HOLDER 3/4X3/4X4-1/2IN
    £80.10 Price with VAT: £96.12 Buy Surplus As Low As £48.36 Price with VAT: £58.04
    £48.36 Price with VAT: £58.04
    KENNAMETAL DCRNL-166D

    KENNAMETAL

    DCRNL-166D

    TURNING TOOL HOLDER
    £104.28 Price with VAT: £125.14 Buy Surplus As Low As £62.72 Price with VAT: £75.27
    £62.72 Price with VAT: £75.27
    KENNAMETAL DDJNR-164D

    KENNAMETAL

    DDJNR-164D

    TOOL HOLDER TURNING
    £163.98 Price with VAT: £196.78 Buy Surplus As Low As £82.37 Price with VAT: £98.84
    £82.37 Price with VAT: £98.84
    KENNAMETAL DSDNN-124

    KENNAMETAL

    DSDNN-124

    TURNING TOOL HOLDER
    £60.45 Price with VAT: £72.55 Buy Surplus As Low As £36.27 Price with VAT: £43.53
    £36.27 Price with VAT: £43.53
    KENNAMETAL KTAR-163

    KENNAMETAL

    KTAR-163

    TURNING TOOL HOLDER
    £52.14 Price with VAT: £62.57 Buy Surplus As Low As £31.74 Price with VAT: £38.09
    £31.74 Price with VAT: £38.09
    KENNAMETAL CV40BHC16M400

    KENNAMETAL

    CV40BHC16M400

    INSERT FOR CUTTING TOOL
    £35.52 Price with VAT: £42.62 Buy Surplus As Low As £21.91 Price with VAT: £26.30
    £21.91 Price with VAT: £26.30
    KENNAMETAL DCMT32.52MF

    KENNAMETAL

    DCMT32.52MF

    TURNIG TOOL HOLDER
    £18.14 Price with VAT: £21.76 Buy Surplus As Low As £11.34 Price with VAT: £13.60
    £11.34 Price with VAT: £13.60
    KENNAMETAL DNMA433-KC910

    KENNAMETAL

    DNMA433-KC910

    TURNIG TOOL HOLDER
    £48.36 Price with VAT: £58.04 Buy Surplus As Low As £29.47 Price with VAT: £35.37
    £29.47 Price with VAT: £35.37
    KENNAMETAL DNMG432UN-KC9315

    KENNAMETAL

    DNMG432UN-KC9315

    TURNIG TOOL HOLDER
    £48.36 Price with VAT: £58.04 Buy Surplus As Low As £29.47 Price with VAT: £35.37
    £29.47 Price with VAT: £35.37
    KENNAMETAL CNMG433PG-RC8025

    KENNAMETAL

    CNMG433PG-RC8025

    CARBON STEEL INSERT
    £35.52 Price with VAT: £42.62 Buy Surplus As Low As £21.91 Price with VAT: £26.30
    £21.91 Price with VAT: £26.30
    KENNAMETAL DNMG432LF-KC9010

    KENNAMETAL

    DNMG432LF-KC9010

    TURNIG TOOL HOLDER
    £48.36 Price with VAT: £58.04 Buy Surplus As Low As £29.47 Price with VAT: £35.37
    £29.47 Price with VAT: £35.37
    KENNAMETAL 2897673R00

    KENNAMETAL

    2897673R00

    KENNAMETAL, 2897673R00, END MILL ADAPTER, WITH HSK 100 TAPER
    £427.72 Price with VAT: £513.26 Buy Surplus As Low As £213.86 Price with VAT: £256.63
    £213.86 Price with VAT: £256.63
    KENNAMETAL SS150EL30431/096239CL0

    KENNAMETAL

    SS150EL30431/096239CL0

    TOOL RELEASE
    Buy Surplus As Low As £58.76 Price with VAT: £70.51
    £58.76 Price with VAT: £70.51
    KENNAMETAL 1018354

    KENNAMETAL

    1018354

    CAT50 OUTSIDE TAPER, SS TO CAT STRAIGHT SHANK ADAPTER, (MOQ=1, PKG QTY=1)1018354
    £244.84 Price with VAT: £293.81 Buy Surplus As Low As £147.36 Price with VAT: £176.83
    £147.36 Price with VAT: £176.83
    KENNAMETAL 1018361

    KENNAMETAL

    1018361

    CAT50 OUTSIDE TAPER, SS TO CAT STRAIGHT SHANK ADAPTER, (MOQ=1, PKG QTY=1)1018361
    £377.84 Price with VAT: £453.41 Buy Surplus As Low As £226.71 Price with VAT: £272.05
    £226.71 Price with VAT: £272.05
    KENNAMETAL 1021047

    KENNAMETAL

    1021047

    CAP SCREW FOR INDEXABLES: T8 TORX, M3 X 0.5 THREAD, (MOQ=1, PKG QTY=1)
    £4.26 Price with VAT: £5.12 Buy Surplus As Low As £2.56 Price with VAT: £3.07
    £2.56 Price with VAT: £3.07
    KENNAMETAL 1021301

    KENNAMETAL

    1021301

    CAP SCREW FOR INDEXABLES: T20 TORX, M5 X 0.8 THREAD, (MOQ=1, PKG QTY=1)1021301
    £10.58 Price with VAT: £12.70 Buy Surplus As Low As £6.35 Price with VAT: £7.62
    £6.35 Price with VAT: £7.62
    KENNAMETAL 1021537

    KENNAMETAL

    1021537

    2.5MM HEX SOCKET, M6.3X1 THREAD, LOCK PIN FOR INDEXABLE TURNING TOOLS, (MOQ=1, PKG QTY=1)1021537
    £27.96 Price with VAT: £33.55 Buy Surplus As Low As £17.38 Price with VAT: £20.86
    £17.38 Price with VAT: £20.86
    KENNAMETAL 1093539

    KENNAMETAL

    1093539

    HYDRAULIC CHUCK SLEEVE: 18 MM ID, 31.75 MM OD, 35.99 MM HEAD DIA, (MOQ=1, PKG QTY=1)1093539
    £249.38 Price with VAT: £299.25 Buy Surplus As Low As £149.63 Price with VAT: £179.55
    £149.63 Price with VAT: £179.55
    KENNAMETAL 1133075

    KENNAMETAL

    1133075

    FAN FOR INDEXABLE DEEP-HOLE DRILLING, (MOQ=1, PKG QTY=1)
    £5.06 Price with VAT: £6.07 Buy Surplus As Low As £3.03 Price with VAT: £3.64
    £3.03 Price with VAT: £3.64
    KENNAMETAL 1134307

    KENNAMETAL

    1134307

    DRIVE KEY, (MOQ=1, PKG QTY=1)
    £170.79 Price with VAT: £204.94 Buy Surplus As Low As £102.77 Price with VAT: £123.33
    £102.77 Price with VAT: £123.33
    KENNAMETAL 1136014

    KENNAMETAL

    1136014

    ER: ER16, 0.1181", (MOQ=1, PKG QTY=1)1136014
    £53.65 Price with VAT: £64.38 Buy Surplus As Low As £32.49 Price with VAT: £38.99
    £32.49 Price with VAT: £38.99
    KENNAMETAL 1137331

    KENNAMETAL

    1137331

    PUNCH FOR INDEXABLE P-CLAMPING CUTTING, (MOQ=1, PKG QTY=1)1137331
    £34.01 Price with VAT: £40.81 Buy Surplus As Low As £20.40 Price with VAT: £24.48
    £20.40 Price with VAT: £24.48
    KENNAMETAL 1137520

    KENNAMETAL

    1137520

    CAP SCREW FOR INDEXABLES, (MOQ=:1, PKG QTY=1)
    £3.25 Price with VAT: £3.90 Buy Surplus As Low As £1.95 Price with VAT: £2.34
    £1.95 Price with VAT: £2.34
    KENNAMETAL 1144914

    KENNAMETAL

    1144914

    MODULAR TURNING & PROFILING HEAD: SIZE KM32, 35 MM HEAD LENGTH, EXTERNAL, RIGHT HAND, (MOQ=1, PKG QTY=1)1144914
    £355.17 Price with VAT: £426.21 Buy Surplus As Low As £213.10 Price with VAT: £255.72
    £213.10 Price with VAT: £255.72
    KENNAMETAL 1191620

    KENNAMETAL

    1191620

    SPOTTING DRILL: 6 MM DIA, 120 ° POINT, 54 MM OAL, SOLID CARBIDE, (MOQ=1, PKG QTY=1)1191620
    £86.15 Price with VAT: £103.38 Buy Surplus As Low As £52.14 Price with VAT: £62.57
    £52.14 Price with VAT: £62.57
    KENNAMETAL 1808153

    KENNAMETAL

    1808153

    RH MCLN NEGATIVE RAKE INDEXABLE TURNING TOOLHOLDER, (MOQ=1, PKG QTY=1)1808153
    £273.56 Price with VAT: £328.27 Buy Surplus As Low As £164.74 Price with VAT: £197.69
    £164.74 Price with VAT: £197.69
    KENNAMETAL 1855669

    KENNAMETAL

    1855669

    MODULAR LATHE ADAPTER/MOUNT: LEFT HAND CUT, KM63XMZ MODULAR CONNECTION, (MOQ=1, PKG QTY=1)1855669
    £1,316.41 Price with VAT: £1,579.69 Buy Surplus As Low As £790.45 Price with VAT: £948.54
    £790.45 Price with VAT: £948.54
    KENNAMETAL 1949635

    KENNAMETAL

    1949635

    INDEXABLE GROOVING-CUTOFF TOOLHOLDER: A4SMR2020K0314, 3 MM MIN GROOVE WIDTH, 14 MM MAX DEPTH OF CUT, RIGHT HAND, (MOQ=1, PKG QTY=1)1949635
    £202.52 Price with VAT: £243.03 Buy Surplus As Low As £121.67 Price with VAT: £146.00
    £121.67 Price with VAT: £146.00
    KENNAMETAL 2057426

    KENNAMETAL

    2057426

    55MM OAL X 14MM OAW X 19.25MM OAH LEFT HAND INDEXABLE TURNING CARTRIDGE, (MOQ=1, PKG QTY=1)2057426
    £157.94 Price with VAT: £189.53 Buy Surplus As Low As £95.22 Price with VAT: £114.26
    £95.22 Price with VAT: £114.26
    KENNAMETAL 2077947

    KENNAMETAL

    2077947

    55MM OAL X 14MM OAW X 19.25MM OAH LEFT HAND INDEXABLE TURNING CARTRIDGE, (MOQ=1, PKG QTY=1)2077947
    £157.94 Price with VAT: £189.53 Buy Surplus As Low As £95.22 Price with VAT: £114.26
    £95.22 Price with VAT: £114.26
    KENNAMETAL 2265291

    KENNAMETAL

    2265291

    MODULAR TURNING & PROFILING HEAD: SIZE KM63, 60 MM HEAD LENGTH, EXTERNAL, NEUTRAL, (MOQ=1, PKG QTY=1)2265291
    £476.08 Price with VAT: £571.30 Buy Surplus As Low As £285.65 Price with VAT: £342.78
    £285.65 Price with VAT: £342.78
    KENNAMETAL 2265317

    KENNAMETAL

    2265317

    MODULAR TURNING & PROFILING HEAD: SIZE KM63, 60 MM HEAD LENGTH, INTERNAL, RIGHT HAND, (MOQ=1, PKG QTY=1)2265317
    £501.02 Price with VAT: £601.22 Buy Surplus As Low As £300.76 Price with VAT: £360.92
    £300.76 Price with VAT: £360.92
    KENNAMETAL 2508156

    KENNAMETAL

    2508156

    HYDRAULIC TOOL CHUCK: CAT50, TAPER SHANK, 20 MM HOLE, (MOQ=1, PKG QTY=1)2508156
    £1,065.52 Price with VAT: £1,278.62 Buy Surplus As Low As £639.31 Price with VAT: £767.17
    £639.31 Price with VAT: £767.17
    KENNAMETAL 3019255

    KENNAMETAL

    3019255

    HYDRAULIC TOOL CHUCK: CAT50, TAPER SHANK, 16 MM HOLE, (MOQ=1, PKG QTY=1)3019255
    £1,065.52 Price with VAT: £1,278.62 Buy Surplus As Low As £639.31 Price with VAT: £767.17
    £639.31 Price with VAT: £767.17
    KENNAMETAL 3019256

    KENNAMETAL

    3019256

    HYDRAULIC TOOL CHUCK: CAT50, TAPER SHANK, 18 MM HOLE, (MOQ=1, PKG QTY=1)3019256
    £1,065.52 Price with VAT: £1,278.62 Buy Surplus As Low As £639.31 Price with VAT: £767.17
    £639.31 Price with VAT: £767.17
    KENNAMETAL 3593675

    KENNAMETAL

    3593675

    CAP SCREW FOR INDEXABLES: T8 TORX, M2.5 X 0.45 THREAD, (MOQ=1, PKG QTY=1)3593675
    £10.58 Price with VAT: £12.70 Buy Surplus As Low As £6.35 Price with VAT: £7.62
    £6.35 Price with VAT: £7.62
    KENNAMETAL 3660591

    KENNAMETAL

    3660591

    SERIES KENDEX, CM CLAMP FOR INDEXABLES, (MOQ=1, PKG QTY=1)3660591
    £24.18 Price with VAT: £29.02 Buy Surplus As Low As £15.11 Price with VAT: £18.14
    £15.11 Price with VAT: £18.14
    KENNAMETAL 400.09375

    KENNAMETAL

    HERTEL

    400.09375

    TAPER LENGTH DRILL: 0.0938" DIA, 118 DEG, HSS, (MOQ=12, PKG QTY=1)400.09375
    £6.81 Price with VAT: £8.17 Buy Surplus As Low As £4.08 Price with VAT: £4.90
    £4.08 Price with VAT: £4.90
    KENNAMETAL 400.109375

    KENNAMETAL

    HERTEL

    400.109375

    TAPER LENGTH DRILL: 0.1094" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.109375
    £8.31 Price with VAT: £9.98 Buy Surplus As Low As £4.99 Price with VAT: £5.99
    £4.99 Price with VAT: £5.99
    KENNAMETAL 400.125

    KENNAMETAL

    HERTEL

    400.125

    TAPER LENGTH DRILL: 0.1250" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.125
    £8.31 Price with VAT: £9.98 Buy Surplus As Low As £4.99 Price with VAT: £5.99
    £4.99 Price with VAT: £5.99
    KENNAMETAL 400.140625

    KENNAMETAL

    HERTEL

    400.140625

    TAPER LENGTH DRILL: 0.1406" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.140625
    £9.82 Price with VAT: £11.79 Buy Surplus As Low As £5.89 Price with VAT: £7.07
    £5.89 Price with VAT: £7.07
    Next
    1 2 3