Product Search

    SEARCH NOW FOR ALL YOUR KENNAMETAL SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 451-500 of 495.
    KENNAMETAL KC9315

    KENNAMETAL

    KC9315

    INSERT TOOL
    ✓ IN STOCK!
    £15.04 Price with VAT: £18.05 Buy Surplus As Low As £10.81 Price with VAT: £12.97
    £10.81 Price with VAT: £12.97
    KENNAMETAL KCGX110308R15-EACH

    KENNAMETAL

    KCGX110308R15-EACH

    PROFILING INSERT, TIALN FINISH, 55° INCL ANGLE, PARALLELOGRAM, 0.4567" SIDE LENGTH, 1/8" THICK, 1/32" CORNER RADIUS, KC850, NPR52
    £10.38 Price with VAT: £12.46 Buy Surplus As Low As £5.09 Price with VAT: £6.10
    £5.09 Price with VAT: £6.10
    KENNAMETAL KGSPR20UD

    KENNAMETAL

    KGSPR20UD

    DISCONTINUED BY MANUFACTURER, TOOL HOLDER
    ✓ IN STOCK!
    Buy Surplus As Low As £138.73 Price with VAT: £166.47
    £138.73 Price with VAT: £166.47
    KENNAMETAL KISR150SE4453

    KENNAMETAL

    KISR150SE4453

    KENNAMETAL, KISR150SE4453, STRAIGHT SHANK, 45DEGREE LEAD ANGLE, 1-3/4IN MAX CUT DIAM, 1-1/2IN MIN CUT DIAM, 0.221IN MAX DEPTH OF CUT, INDEXABLE CHAMFER AND ANGLE END MILL, 3 INSERTS, SEHW 43 ...
    £456.07 Price with VAT: £547.29 Buy Surplus As Low As £273.64 Price with VAT: £328.37
    £273.64 Price with VAT: £328.37
    KENNAMETAL KM40-S32G-NVUCL16

    KENNAMETAL

    KM40-S32G-NVUCL16

    KENNAMETAL, KM40-S32G-NVUCL16, KM40S32GNVUCL16, DRILL ADAPTER, 93DEGREE,
    ✓ IN STOCK!
    £94.92 Price with VAT: £113.91 Buy Surplus As Low As £85.43 Price with VAT: £102.52
    £85.43 Price with VAT: £102.52
    KENNAMETAL KRR658675

    KENNAMETAL

    KRR658675

    1732816, BOX OF 6, ANSI/ISO TURNING INSERT, SP97CV SHIM PROFILING INSERT, TIALN FINISH, 19.05 MM WIDE X 1/2 INCH THICK, 3/16" CORNER RADIUS
    ✓ IN STOCK!
    £296.84 Price with VAT: £356.21 Buy Surplus As Low As £174.21 Price with VAT: £209.05
    £174.21 Price with VAT: £209.05
    KENNAMETAL KSFR-164C

    KENNAMETAL

    KSFR-164C

    TOOL HOLDER 1IN SHANK
    £47.46 Price with VAT: £56.95 Buy Surplus As Low As £28.92 Price with VAT: £34.71
    £28.92 Price with VAT: £34.71
    KENNAMETAL KSHR600HN5345C8

    KENNAMETAL

    KSHR600HN5345C8

    SHELL MILL, 6INCH, 45DEG,
    ✓ IN STOCK!
    £1,865.88 Price with VAT: £2,239.06 Buy Surplus As Low As £618.94 Price with VAT: £742.73
    £618.94 Price with VAT: £742.73
    KENNAMETAL KTAR-163

    KENNAMETAL

    KTAR-163

    TURNING TOOL HOLDER
    £51.17 Price with VAT: £61.40 Buy Surplus As Low As £31.15 Price with VAT: £37.38
    £31.15 Price with VAT: £37.38
    KENNAMETAL KU-1420C

    KENNAMETAL

    KU-1420C

    DISCONTINUED BY MANUFACTURER, CUTTING / INSERT HOLDER
    ✓ IN STOCK!
    Buy Surplus As Low As £14.30 Price with VAT: £17.16
    £14.30 Price with VAT: £17.16
    KENNAMETAL KU-3040

    KENNAMETAL

    KU-3040

    DISCONTINUED BY MANUFACTURER, INSERT, KENDEX
    ✓ IN STOCK!
    Buy Surplus As Low As £12.46 Price with VAT: £14.95
    £12.46 Price with VAT: £14.95
    KENNAMETAL LNER25M

    KENNAMETAL

    LNER25M

    LOCKNUT COLLET CHUCK 25SERIES
    ✓ IN STOCK!
    £53.39 Price with VAT: £64.07 Buy Surplus As Low As £25.23 Price with VAT: £30.27
    £25.23 Price with VAT: £30.27
    KENNAMETAL MCLNL165C

    KENNAMETAL

    MCLNL165C

    KENNAMETAL, MCLNL165C, TURNING TOOLHOLDER, GAUGE INSERT, HEX 1/8IN,
    ✓ IN STOCK!
    £92.70 Price with VAT: £111.24 Buy Surplus As Low As £89.86 Price with VAT: £107.83
    £89.86 Price with VAT: £107.83
    KENNAMETAL MCLNR124B

    KENNAMETAL

    HERTEL

    MCLNR124B

    INDEXABLE TURNING TOOLHOLDER, 3/4IN X 3/4IN SHANK, SCREW CLAMP, RIGHT HAND,
    ✓ IN STOCK!
    £141.64 Price with VAT: £169.97 Buy Surplus As Low As £87.70 Price with VAT: £105.24
    £87.70 Price with VAT: £105.24
    KENNAMETAL MCLNR-164C

    KENNAMETAL

    MCLNR-164C

    TURNING TOOLHOLDER SIZE 164C
    £78.61 Price with VAT: £94.33 Buy Surplus As Low As £47.46 Price with VAT: £56.95
    £47.46 Price with VAT: £56.95
    KENNAMETAL MDJNL-204D

    KENNAMETAL

    MDJNL-204D

    TOOL HOLDER KENLOC 6IN 55 DEGREE INSERT LEFT HAND
    £256.13 Price with VAT: £307.35 Buy Surplus As Low As £149.80 Price with VAT: £179.76
    £149.80 Price with VAT: £179.76
    KENNAMETAL MS1200

    KENNAMETAL

    MS1200

    CLAMP SCREW PRICE/EACH
    Buy Surplus As Low As £0.22 Price with VAT: £0.27
    £0.22 Price with VAT: £0.27
    KENNAMETAL MS2175

    KENNAMETAL

    MS2175

    BUTTON-HEAD CAP SCREW, 15 MM LENGTH, 5 MM CAP, SOLD PER PIECE
    ✓ IN STOCK!
    £1.14 Price with VAT: £1.37 Buy Surplus As Low As £0.62 Price with VAT: £0.74
    £0.62 Price with VAT: £0.74
    KENNAMETAL MSDNN-123

    KENNAMETAL

    MSDNN-123

    TURNING TOOLHOLDER, 1096182
    ✓ IN STOCK!
    £142.96 Price with VAT: £171.55 Buy Surplus As Low As £76.43 Price with VAT: £91.71
    £76.43 Price with VAT: £91.71
    KENNAMETAL MSKNR12CA4C

    KENNAMETAL

    MSKNR12CA4C

    DISCONTINUED BY MANUFACTURER, CARTRIDGE INSERT / HOLDER
    ✓ IN STOCK!
    Buy Surplus As Low As £10.80 Price with VAT: £12.97
    £10.80 Price with VAT: £12.97
    KENNAMETAL MSRNL12CA12

    KENNAMETAL

    MSRNL12CA12

    TOOL HOLDER CARTRIDGE
    £80.09 Price with VAT: £96.11 Buy Surplus As Low As £40.05 Price with VAT: £48.05
    £40.05 Price with VAT: £48.05
    KENNAMETAL MTFNR20CA22

    KENNAMETAL

    MTFNR20CA22

    KENLOC INSERT, 70.0000 MM BORE DIAMETER / TOOL LENGTH, -5.000 AXIAL RAKE ANGLE, TN 220408 / TN 432 GAGE INSERT
    ✓ IN STOCK!
    £135.35 Price with VAT: £162.42 Buy Surplus As Low As £66.16 Price with VAT: £79.39
    £66.16 Price with VAT: £79.39
    KENNAMETAL MTWL-103

    KENNAMETAL

    MTWL-103

    TURNING TOOL HOLDER
    Buy Surplus As Low As £33.37 Price with VAT: £40.05
    £33.37 Price with VAT: £40.05
    KENNAMETAL MVJNR-123B

    KENNAMETAL

    MVJNR-123B

    TOOL HOLDER INSERT L1/4.50 L2/1.66 RIGHT HAND
    Buy Surplus As Low As £77.87 Price with VAT: £93.44
    £77.87 Price with VAT: £93.44
    KENNAMETAL MVJNR243D

    KENNAMETAL

    MVJNR243D

    TOOL HOLDER, H 1.50, B 1.50, F 2.000, L 16.00, LH 1.66, GAGE INSERT VN..332, HEX5/64, HEX5/32
    ✓ IN STOCK!
    £168.52 Price with VAT: £202.23 Buy Surplus As Low As £93.91 Price with VAT: £112.70
    £93.91 Price with VAT: £112.70
    KENNAMETAL MWLNL204D

    KENNAMETAL

    MWLNL204D

    KENNAMETAL ,MWLNL204D , TOOL BIT HOLDER, KL SERIES
    ✓ IN STOCK!
    £75.92 Price with VAT: £91.11 Buy Surplus As Low As £46.74 Price with VAT: £56.09
    £46.74 Price with VAT: £56.09
    KENNAMETAL NRL-163C

    KENNAMETAL

    NRL-163C

    TOOL HOLDER 1IN
    £63.03 Price with VAT: £75.64 Buy Surplus As Low As £37.82 Price with VAT: £45.38
    £37.82 Price with VAT: £45.38
    Repair Yours Contact Us
    KENNAMETAL NSR-162C

    KENNAMETAL

    NSR-162C

    TOOL HOLDER TOP NOTCH TURN 1IN SHANK
    £78.61 Price with VAT: £94.33 Buy Surplus As Low As £47.46 Price with VAT: £56.95
    £47.46 Price with VAT: £56.95
    KENNAMETAL NSR-163C

    KENNAMETAL

    NSR-163C

    GROOVING TOOL HOLDER 1INX1IN SHANK
    £71.19 Price with VAT: £85.43 Buy Surplus As Low As £43.01 Price with VAT: £51.61
    £43.01 Price with VAT: £51.61
    Repair Yours Contact Us
    KENNAMETAL NVLCL 163D

    KENNAMETAL

    NVLCL 163D

    EXTERNAL LEFT HAND, NVLC, -5° LEAD ANGLE, VP COMPATIBLE, INDEXABLE PROFILING TOOLHOLDER - 1 INCH SHANK HEIGHT, 1 INCH SHANK WIDTH, 6 INCH OVERALL LENGTH, STEEL
    £126.07 Price with VAT: £151.28 Buy Surplus As Low As £75.64 Price with VAT: £90.77
    £75.64 Price with VAT: £90.77
    KENNAMETAL RNMG-43SGP

    KENNAMETAL

    RNMG-43SGP

    INSERT CARBIDE STYLE RNMG 43
    £12.61 Price with VAT: £15.13 Buy Surplus As Low As £8.16 Price with VAT: £9.79
    £8.16 Price with VAT: £9.79
    KENNAMETAL SM120

    KENNAMETAL

    SM120

    CARBIDE INSERT SHIM
    £2.75 Price with VAT: £3.30 Buy Surplus As Low As £1.65 Price with VAT: £1.98
    £1.65 Price with VAT: £1.98
    KENNAMETAL SM310

    KENNAMETAL

    SM310

    SHIM SEAT
    ✓ IN STOCK!
    £6.37 Price with VAT: £7.64 Buy Surplus As Low As £3.00 Price with VAT: £3.60
    £3.00 Price with VAT: £3.60
    KENNAMETAL SNMA643

    KENNAMETAL

    SNMA643

    INSERT, KCK20 CARBIDE TURNING INSERT, TICN/AL2O3 FINISH, 3/4" INSCRIBED CIRCLE, 3/64" CORNER RADIUS, 90 SQUARE, SERIES KENLOC, 3758154
    £65.26 Price with VAT: £78.31 Buy Surplus As Low As £39.30 Price with VAT: £47.16
    £39.30 Price with VAT: £47.16
    KENNAMETAL SNMG-2523-EACH

    KENNAMETAL

    SNMG-2523-EACH

    CARBIDE TURNING INSERT SQUARE METAL PRICE/EACH
    £4.72 Price with VAT: £5.66 Buy Surplus As Low As £2.83 Price with VAT: £3.40
    £2.83 Price with VAT: £3.40
    KENNAMETAL SNMG434

    KENNAMETAL

    SNMG434

    CHIP CONTROL INSERT, SNMG120416B, PRICE/EACH
    ✓ IN STOCK!
    £19.59 Price with VAT: £23.50 Buy Surplus As Low As £11.12 Price with VAT: £13.34
    £11.12 Price with VAT: £13.34
    KENNAMETAL SS100DA104488

    KENNAMETAL

    SS100DA104488

    COLLET CHUCK, DOUBLE ANGLE, STRAIGHT SHANK, GRIP 1:1
    ✓ IN STOCK!
    £160.14 Price with VAT: £192.17 Buy Surplus As Low As £55.96 Price with VAT: £67.15
    £55.96 Price with VAT: £67.15
    KENNAMETAL T-121-5P

    KENNAMETAL

    T-121-5P

    KENNAMETAL , T-121-5P, T1215P, TUNGSTEN CARB
    ✓ IN STOCK!
    £92.04 Price with VAT: £110.45 Buy Surplus As Low As £50.99 Price with VAT: £61.19
    £50.99 Price with VAT: £61.19
    KENNAMETAL TNMG 222 K68

    KENNAMETAL

    TNMG 222 K68

    CARBIDE INSERTS, 10 PIECE, KENNAMETAL TNMG 222, GRADE: K68, (PRICE FOR PACK OF 10)
    £36.31 Price with VAT: £43.57 Buy Surplus As Low As £22.47 Price with VAT: £26.96
    £22.47 Price with VAT: £26.96
    KENNAMETAL TNMM432RP-KC9110

    KENNAMETAL

    TNMM432RP-KC9110

    KENNAMETAL, TNMM432RP-KC9110, TNMM432RPKC9110, TURNING INSERT, T STYLE, CARBIDE CVD COATED, MULTI-LAYER AI2O3 TICN,
    £19.28 Price with VAT: £23.14 Buy Surplus As Low As £9.64 Price with VAT: £11.57
    £9.64 Price with VAT: £11.57
    KENNAMETAL TPG431-K68

    KENNAMETAL

    TPG431-K68

    CARBIDE INSERT TURNING TOOL GRADE K68
    £9.74 Price with VAT: £11.68 Buy Surplus As Low As £5.72 Price with VAT: £6.86
    £5.72 Price with VAT: £6.86
    KENNAMETAL VBMT-16-04-12LF

    KENNAMETAL

    VBMT-16-04-12LF

    CARBIDE TOOLS PACK/5
    ✓ IN STOCK!
    £8.98 Price with VAT: £10.78 Buy Surplus As Low As £5.47 Price with VAT: £6.56
    £5.47 Price with VAT: £6.56
    KENNAMETAL WB-62498

    KENNAMETAL

    WB-62498

    TOOL HOLDER
    Buy Surplus As Low As £44.50 Price with VAT: £53.39
    £44.50 Price with VAT: £53.39
    KENNAMETAL WNMG080408RP

    KENNAMETAL

    WNMG080408RP

    KENNAMETAL,WNMG080408RP, ISO CARBIDE INSERT, KENLOC, ROUGHING POSITIVE INSERT, GRADE KCPK05
    £11.87 Price with VAT: £14.24 Buy Surplus As Low As £5.90 Price with VAT: £7.07
    £5.90 Price with VAT: £7.07
    KENNAMETAL WNMG431FP

    KENNAMETAL

    WNMG431FP

    KENNAMETAL, WNMG431FP, CARBIDE INSERT, M-CLAMP INSERT,
    ✓ IN STOCK!
    £16.69 Price with VAT: £20.02 Buy Surplus As Low As £9.56 Price with VAT: £11.47
    £9.56 Price with VAT: £11.47
    Previous
    1 2 3 4 5 6 7 8 9 10