Product Search

    SEARCH NOW FOR ALL YOUR KENNAMETAL SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Filter Results
    Results 501-550 of 993.
    KENNAMETAL CH-30607

    KENNAMETAL

    HERTEL

    CH-30607

    STANDARD STRAIGHT LINE ACTION CLAMP, 700 LB LOAD CAPACITY, 1.626" PLUNGER TRAVEL, FLANGED BASE, STEEL 6 MOUNTING HOLE, 0.28" HOLE, 0.5" PLUNGER DIA, STRAIGHT HANDLECH-30607
    £33.59 Price with VAT: £40.31 Buy Surplus As Low As £20.16 Price with VAT: £24.19
    £20.16 Price with VAT: £24.19
    KENNAMETAL 1261788

    KENNAMETAL

    1261788

    5/64" X 1" CAT50 TAPER SHANK SINGLE ANGLE TG/PG 100 COLLET CHUCK 7" OAL, 3" PROJECTION, BALANCED TO 12_000 RPM, THROUGH-SPINDLE & DIN FLANGE COOLANT
    £257.54 Price with VAT: £309.05 Buy Surplus As Low As £154.53 Price with VAT: £185.43
    £154.53 Price with VAT: £185.43
    KENNAMETAL 1274800

    KENNAMETAL

    1274800

    SHIM FOR INDEXABLES: 1/2" INSCRIBED CIRCLE, BORING BAR, (MOQ=10, PKG QTY=1)1274800
    £33.59 Price with VAT: £40.31 Buy Surplus As Low As £20.16 Price with VAT: £24.19
    £20.16 Price with VAT: £24.19
    KENNAMETAL 1260385

    KENNAMETAL

    1260385

    SERIES KGSP, CM CLAMP FOR INDEXABLES
    £57.48 Price with VAT: £68.98 Buy Surplus As Low As £35.09 Price with VAT: £42.10
    £35.09 Price with VAT: £42.10
    KENNAMETAL 1261618

    KENNAMETAL

    1261618

    COLLET CHUCK: 0.51 TO 13 MM CAPACITY, ER COLLET, TAPER SHANK, (MOQ=1, PKG QTY=1)1261618
    £217.23 Price with VAT: £260.68 Buy Surplus As Low As £130.64 Price with VAT: £156.77
    £130.64 Price with VAT: £156.77
    KENNAMETAL 1260380

    KENNAMETAL

    1260380

    SERIES SEPARATOR, CM CLAMP FOR INDEXABLES LEFT HAND CUT
    £57.48 Price with VAT: £68.98 Buy Surplus As Low As £35.09 Price with VAT: £42.10
    £35.09 Price with VAT: £42.10
    KENNAMETAL 1260087

    KENNAMETAL

    1260087

    CAP SCREW FOR INDEXABLES: T6 TORX, #1-72 THREAD, (MOQ=20, PKG QTY=1)1260087
    £3.50 Price with VAT: £4.20 Buy Surplus As Low As £2.10 Price with VAT: £2.52
    £2.10 Price with VAT: £2.52
    KENNAMETAL 1319470

    KENNAMETAL

    1319470

    SHIM FOR INDEXABLES: 3/8" INSCRIBED CIRCLE, BORING BAR, (MOQ=10, PKG QTY=1)1319470
    £24.63 Price with VAT: £29.56 Buy Surplus As Low As £14.93 Price with VAT: £17.92
    £14.93 Price with VAT: £17.92
    KENNAMETAL 1243779

    KENNAMETAL

    1243779

    CAP SCREW FOR INDEXABLES, (MOQ=:1, PKG QTY=1)
    £39.56 Price with VAT: £47.48 Buy Surplus As Low As £23.89 Price with VAT: £28.67
    £23.89 Price with VAT: £28.67
    KENNAMETAL 1243781

    KENNAMETAL

    1243781

    CAP SCREW FOR INDEXABLES, (MOQ=:1, PKG QTY=1)
    £39.56 Price with VAT: £47.48 Buy Surplus As Low As £23.89 Price with VAT: £28.67
    £23.89 Price with VAT: £28.67
    KENNAMETAL 1243777

    KENNAMETAL

    1243777

    CAP SCREW FOR INDEXABLES, (MOQ=:1, PKG QTY=1)
    £39.56 Price with VAT: £47.48 Buy Surplus As Low As £23.89 Price with VAT: £28.67
    £23.89 Price with VAT: £28.67
    KENNAMETAL 1288963

    KENNAMETAL

    1288963

    17 PIECE, 1/4 TO 3/4" CAPACITY, DA180 DOUBLE ANGLE COLLET SET INCREMENTS OF 1/32"
    £405.35 Price with VAT: £486.42 Buy Surplus As Low As £243.36 Price with VAT: £292.03
    £243.36 Price with VAT: £292.03
    KENNAMETAL 1274818

    KENNAMETAL

    1274818

    SHIM FOR INDEXABLES: 1/2" INSCRIBED CIRCLE, BORING BAR, (MOQ=10, PKG QTY=1)1274818
    £27.62 Price with VAT: £33.14 Buy Surplus As Low As £17.17 Price with VAT: £20.60
    £17.17 Price with VAT: £20.60
    KENNAMETAL 1191845

    KENNAMETAL

    1191845

    SERIES SEPARATOR, CM CLAMP FOR INDEXABLES RIGHT HAND CUT
    £54.49 Price with VAT: £65.39 Buy Surplus As Low As £32.85 Price with VAT: £39.42
    £32.85 Price with VAT: £39.42
    KENNAMETAL 1191842

    KENNAMETAL

    1191842

    SERIES KGSP, CM CLAMP FOR INDEXABLES
    £46.28 Price with VAT: £55.54 Buy Surplus As Low As £28.37 Price with VAT: £34.04
    £28.37 Price with VAT: £34.04
    KENNAMETAL 1191837

    KENNAMETAL

    1191837

    SERIES KGSP, CM CLAMP FOR INDEXABLES, (MOQ=1, PKG QTY=1)1191837
    £59.72 Price with VAT: £71.66 Buy Surplus As Low As £35.83 Price with VAT: £43.00
    £35.83 Price with VAT: £43.00
    KENNAMETAL 1261787

    KENNAMETAL

    1261787

    3/64" X 3/4" CAT50 TAPER SHANK SINGLE ANGLE TG/PG 75 COLLET CHUCK 10" OAL, 6" PROJECTION, BALANCED TO 12_000 RPM, THROUGH-SPINDLE & DIN FLANGE COOLANT
    £306.07 Price with VAT: £367.28 Buy Surplus As Low As £183.64 Price with VAT: £220.37
    £183.64 Price with VAT: £220.37
    KENNAMETAL 1260396

    KENNAMETAL

    1260396

    SERIES SEPARATOR, CM CLAMP FOR INDEXABLES LEFT HAND CUT
    £52.26 Price with VAT: £62.71 Buy Surplus As Low As £31.35 Price with VAT: £37.62
    £31.35 Price with VAT: £37.62
    KENNAMETAL 8000170

    KENNAMETAL

    HERTEL

    8000170

    1/2" INSCRIBED CIRCLE, SQUARE EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, ISSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT8000170
    £29.11 Price with VAT: £34.94 Buy Surplus As Low As £17.92 Price with VAT: £21.50
    £17.92 Price with VAT: £21.50
    KENNAMETAL 750624

    KENNAMETAL

    HERTEL

    750624

    3/8", 5/8" LOC, 3/8" SHANK DIAM, 2" OAL, 2 FLUTE, SOLID CARBIDE SQUARE END MILL SINGLE END, TIN FINISH, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT
    £35.83 Price with VAT: £43.00 Buy Surplus As Low As £21.65 Price with VAT: £25.98
    £21.65 Price with VAT: £25.98
    KENNAMETAL 2292258

    KENNAMETAL

    HERTEL

    2292258

    LETTER Y 6-FLUTE STRAIGHT SHANK STRAIGHT FLUTE HIGH SPEED STEEL CHUCKING REAMER BRIGHT FINISH, 7" OAL, 1-3/4" FLUTE LENGTH, RH CUT
    £98.54 Price with VAT: £118.25 Buy Surplus As Low As £49.76 Price with VAT: £59.71
    £49.76 Price with VAT: £59.71
    KENNAMETAL 1-202-0300

    KENNAMETAL

    HERTEL

    1-202-0300

    MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 3 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 0.6299 ; BODY MATERIAL: CAST IRON (SEM ...
    £488.21 Price with VAT: £585.85 Buy Surplus As Low As £293.37 Price with VAT: £352.05
    £293.37 Price with VAT: £352.05
    KENNAMETAL 1-202-0801

    KENNAMETAL

    HERTEL

    1-202-0801

    MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 3 ; MOUNT: FRONT MOUNT PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): .2.1654 ; BODY MATERIAL: C ...
    £593.47 Price with VAT: £712.16 Buy Surplus As Low As £356.08 Price with VAT: £427.30
    £356.08 Price with VAT: £427.30
    KENNAMETAL 1-202-0400

    KENNAMETAL

    HERTEL

    1-202-0400

    MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 4 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 0.7874 ; BODY MATERIAL: CAST IRON (SEM ...
    £557.64 Price with VAT: £669.16 Buy Surplus As Low As £335.18 Price with VAT: £402.21
    £335.18 Price with VAT: £402.21
    KENNAMETAL 6694024

    KENNAMETAL

    6694024

    ER11 COLLET LOCKNUT (MOQ=1, PKG QTY=1)6694024
    £30.61 Price with VAT: £36.73 Buy Surplus As Low As £18.66 Price with VAT: £22.40
    £18.66 Price with VAT: £22.40
    KENNAMETAL 6371979

    KENNAMETAL

    6371979

    REPLACEABLE-TIP DRILL: STRAIGHT SHANK, 14.00 MM SHANK DIA (MOQ=1, PKG QTY=1)6371979
    £324.73 Price with VAT: £389.67 Buy Surplus As Low As £194.84 Price with VAT: £233.80
    £194.84 Price with VAT: £233.80
    Repair Yours Contact Us
    KENNAMETAL 6371974

    KENNAMETAL

    6371974

    REPLACEABLE-TIP DRILL: STRAIGHT SHANK, 12.00 MM SHANK DIA (MOQ=1, PKG QTY=1)6371974
    £292.63 Price with VAT: £351.15 Buy Surplus As Low As £176.17 Price with VAT: £211.41
    £176.17 Price with VAT: £211.41
    Repair Yours Contact Us
    KENNAMETAL 6371064

    KENNAMETAL

    6371064

    KTFST04688HPL KCMS15 CARBIDE REPLACEABLE TIP DRILL ALTIN FINISH, 140° INCLUDED ANGLE, 15/32" DIAM, THROUGH COOLANT, SERIES KTFS6371064
    £129.89 Price with VAT: £155.87 Buy Surplus As Low As £78.38 Price with VAT: £94.06
    £78.38 Price with VAT: £94.06
    Repair Yours Contact Us
    KENNAMETAL 6370989

    KENNAMETAL

    6370989

    KTFST14800HPCM KC7410 CARBIDE REPLACEABLE TIP DRILL ALCR FINISH, 143° INCLUDED ANGLE, 14.8MM DIAM, THROUGH COOLANT, SERIES KTFS (MOQ=10, PKG QTY=1)6370989
    £143.33 Price with VAT: £171.99 Buy Surplus As Low As £86.59 Price with VAT: £103.91
    £86.59 Price with VAT: £103.91
    Repair Yours Contact Us
    KENNAMETAL 6370985

    KENNAMETAL

    6370985

    KTFST21500HPLM KCMS15 CARBIDE REPLACEABLE TIP DRILL ALTIN FINISH, 140° INCLUDED ANGLE, 21.5MM DIAM, THROUGH COOLANT, SERIES KTFS6370985
    £195.58 Price with VAT: £234.70 Buy Surplus As Low As £117.95 Price with VAT: £141.54
    £117.95 Price with VAT: £141.54
    Repair Yours Contact Us
    KENNAMETAL 6370951

    KENNAMETAL

    6370951

    KTFST07656HPL KCMS15 CARBIDE REPLACEABLE TIP DRILL ALTIN FINISH, 140° INCLUDED ANGLE, 49/64" DIAM, THROUGH COOLANT, SERIES KTFS6370951
    £176.17 Price with VAT: £211.41 Buy Surplus As Low As £106.00 Price with VAT: £127.20
    £106.00 Price with VAT: £127.20
    Repair Yours Contact Us
    KENNAMETAL 5981591

    KENNAMETAL

    5981591

    KSEM2550FEGM CARBIDE REPLACEABLE TIP DRILL TIALN FINISH, 150° INCLUDED ANGLE, 25.5MM DIAM, SERIES KSEM5981591
    £250.08 Price with VAT: £300.09 Buy Surplus As Low As £150.05 Price with VAT: £180.06
    £150.05 Price with VAT: £180.06
    Repair Yours Contact Us
    KENNAMETAL 5515226

    KENNAMETAL

    5515226

    KSEM2900HPGM KCPM45 CARBIDE REPLACEABLE TIP DRILL TIALN FINISH, 140° INCLUDED ANGLE, 29MM DIAM, SERIES KSEM PLUS5515226
    £275.46 Price with VAT: £330.55 Buy Surplus As Low As £165.72 Price with VAT: £198.87
    £165.72 Price with VAT: £198.87
    Repair Yours Contact Us
    KENNAMETAL 5515225

    KENNAMETAL

    5515225

    INDEXABLE INSERT DRILL (MOQ=1, PKG QTY=1)5515225
    £325.47 Price with VAT: £390.57 Buy Surplus As Low As £195.58 Price with VAT: £234.70
    £195.58 Price with VAT: £234.70
    Repair Yours Contact Us
    KENNAMETAL 2499891

    KENNAMETAL

    2499891

    KSEM1514HPG KC7315 CARBIDE REPLACEABLE TIP DRILL, (MOQ=1, PKG QTY=1)2499891
    £333.69 Price with VAT: £400.42 Buy Surplus As Low As £200.81 Price with VAT: £240.97
    £200.81 Price with VAT: £240.97
    Repair Yours Contact Us
    KENNAMETAL 2047429

    KENNAMETAL

    2047429

    KSEM0875HP KC7315 CARBIDE REPLACEABLE TIP DRILL, (MOQ=1, PKG QTY=1)2047429
    £232.16 Price with VAT: £278.59 Buy Surplus As Low As £139.60 Price with VAT: £167.51
    £139.60 Price with VAT: £167.51
    Repair Yours Contact Us
    KENNAMETAL DDPNN-164D

    KENNAMETAL

    DDPNN-164D

    TOOL HOLDER TYPE D 6IN LENGTH 1IN SHANK
    £47.78 Price with VAT: £57.33 Buy Surplus As Low As £29.11 Price with VAT: £34.94
    £29.11 Price with VAT: £34.94
    KENNAMETAL NRL-163C

    KENNAMETAL

    NRL-163C

    TOOL HOLDER 1IN
    £63.45 Price with VAT: £76.14 Buy Surplus As Low As £38.07 Price with VAT: £45.69
    £38.07 Price with VAT: £45.69
    Repair Yours Contact Us
    KENNAMETAL 047-3-020DET2

    KENNAMETAL

    047-3-020DET2

    CARBDE INSERT 1-1/4IN LATHE GROOVING TOOL HOLDER
    £35.09 Price with VAT: £42.10 Buy Surplus As Low As £21.65 Price with VAT: £25.98
    £21.65 Price with VAT: £25.98
    KENNAMETAL MS1200

    KENNAMETAL

    MS1200

    CLAMP SCREW PRICE/EACH
    Buy Surplus As Low As £0.22 Price with VAT: £0.27
    £0.22 Price with VAT: £0.27
    KENNAMETAL RNMG-43SGP

    KENNAMETAL

    RNMG-43SGP

    INSERT CARBIDE STYLE RNMG 43
    £12.69 Price with VAT: £15.23 Buy Surplus As Low As £8.21 Price with VAT: £9.85
    £8.21 Price with VAT: £9.85
    KENNAMETAL 241182R02-KC720

    KENNAMETAL

    241182R02-KC720

    INSERT HSS GRADE KC720 MACHINE TOOL THREADER
    £17.17 Price with VAT: £20.60 Buy Surplus As Low As £8.96 Price with VAT: £10.75
    £8.96 Price with VAT: £10.75
    KENNAMETAL SM310

    KENNAMETAL

    SM310

    SHIM SEAT
    £6.41 Price with VAT: £7.69 Buy Surplus As Low As £1.95 Price with VAT: £2.34
    £1.95 Price with VAT: £2.34
    KENNAMETAL CBT60

    KENNAMETAL

    CBT60

    TRIANGLE SHIM INDEXABLE TOOLING SPARE PART
    Buy Surplus As Low As £5.37 Price with VAT: £6.45
    £5.37 Price with VAT: £6.45
    KENNAMETAL A3SSR200832

    KENNAMETAL

    A3SSR200832

    GROOVING TOOLHOLDER 1-1/4X1-1/4X6-1.8
    £121.13 Price with VAT: £145.35 Buy Surplus As Low As £64.78 Price with VAT: £77.74
    £64.78 Price with VAT: £77.74
    KENNAMETAL BT1872781

    KENNAMETAL

    BT1872781

    LATHE INSERT TOOL HOLDER
    £16.50 Price with VAT: £19.80 Buy Surplus As Low As £10.23 Price with VAT: £12.28
    £10.23 Price with VAT: £12.28
    KENNAMETAL DNMG432LF-KC9010

    KENNAMETAL

    DNMG432LF-KC9010

    TURNIG TOOL HOLDER
    £47.78 Price with VAT: £57.33 Buy Surplus As Low As £29.11 Price with VAT: £34.94
    £29.11 Price with VAT: £34.94
    KENNAMETAL CNMG433PG-RC8025

    KENNAMETAL

    CNMG433PG-RC8025

    CARBON STEEL INSERT
    £35.09 Price with VAT: £42.10 Buy Surplus As Low As £21.65 Price with VAT: £25.98
    £21.65 Price with VAT: £25.98
    KENNAMETAL DNMG432UN-KC9315

    KENNAMETAL

    DNMG432UN-KC9315

    TURNIG TOOL HOLDER
    £47.78 Price with VAT: £57.33 Buy Surplus As Low As £29.11 Price with VAT: £34.94
    £29.11 Price with VAT: £34.94
    KENNAMETAL DNMA433-KC910

    KENNAMETAL

    DNMA433-KC910

    TURNIG TOOL HOLDER
    £47.78 Price with VAT: £57.33 Buy Surplus As Low As £29.11 Price with VAT: £34.94
    £29.11 Price with VAT: £34.94
    Previous Next
    6 7 8 9 10 11 12 13 14 15 16