SEARCH NOW FOR ALL YOUR KENNAMETAL SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
KENNAMETAL
1297415
3MM DA300 DA COLLET 1" OAL, 9.53MM OVERALL DIAM, 0.03MM TIR
£24.47
Price with VAT:
£29.37
KENNAMETAL
1297411
1MM DA300 DA COLLET 1" OAL, 9.53MM OVERALL DIAM, 0.03MM TIR
£47.46
Price with VAT:
£56.95
KENNAMETAL
1606064
10MM ID X 1/2" OD, 16MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 40.01MM LENGTH UNDER HEAD, THROUGH COOLANT
£106.79
Price with VAT:
£128.15
KENNAMETAL
1260391
SERIES SEPARATOR, CM CLAMP FOR INDEXABLES RIGHT HAND CUT
£39.30
Price with VAT:
£47.16
KENNAMETAL
1295604
1 TO 1.5MM ER16 COLLET 0.0152MM TIR, 27.51MM OAL, 16.99MM OVERALL DIAM
£28.18
Price with VAT:
£33.82
KENNAMETAL
1297412
1.5MM DA300 DA COLLET 1" OAL, 9.53MM OVERALL DIAM, 0.03MM TIR
£24.47
Price with VAT:
£29.37
KENNAMETAL
1931561
M3 TORX PLUS CAP SCREW FOR INDEXABLES INSERT COMPATIBLE
£4.07
Price with VAT:
£4.88
KENNAMETAL
2248952
13/16" ID X 1-1/4" OD, 35.99MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 59.99MM LENGTH UNDER HEAD, THROUGH COOLANT
£126.81
Price with VAT:
£152.17
KENNAMETAL
2975402
TP9 TORX PLUS CAP SCREW FOR INDEXABLES INSERT COMPATIBLE, DT9IP KEY DRIVER
£3.32
Price with VAT:
£3.99
KENNAMETAL
3964133
KM50TS MODULAR CONNECTION TAP CHUCK ADAPTER 50MM PROJECTION, SIZE 1 ADAPTER, QUICK CHANGE
£593.27
Price with VAT:
£711.92
KENNAMETAL
3964134
KM50TS MODULAR CONNECTION TAP CHUCK ADAPTER 75MM PROJECTION, SIZE 2 ADAPTER, QUICK CHANGE
£593.27
Price with VAT:
£711.92
KENNAMETAL
SNMA643
INSERT, KCK20 CARBIDE TURNING INSERT, TICN/AL2O3 FINISH, 3/4" INSCRIBED CIRCLE, 3/64" CORNER RADIUS, 90 SQUARE, SERIES KENLOC, 3758154
£39.30
Price with VAT:
£47.16
KENNAMETAL
3795029
1MM X 16MM KM50TS MODULAR CONNECTION ER25 COLLET CHUCK 50MM PROJECTION, THROUGH-SPINDLE COOLANT
£299.60
Price with VAT:
£359.52
KENNAMETAL
5673343
TORX PLUS INSERT SCREW FOR INDEXABLES SHANK COMPATIBLE
£4.39
Price with VAT:
£5.26
KENNAMETAL
HERTEL
1-201-1001
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 3 ; MOUNT: FRONT MOUNT PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.9921 ; BODY MATERIAL: C ...
£451.62
Price with VAT:
£541.95
KENNAMETAL
HERTEL
1-221-0604
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 6 ; NUMBER OF JAWS: 3 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.1635 ; BODY MATERIAL: CAST IRON (SEMI-STEE ...
£558.41
Price with VAT:
£670.09
KENNAMETAL
HERTEL
1-221-0804
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 3 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: CAST IRON (SEMI-STEE ...
£886.19
Price with VAT:
£1,063.43
KENNAMETAL
HERTEL
1-312-1006
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 4 ; MOUNT: A2-6 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.5590 ; BODY MATERIAL: CAST IRON (SEMI-STEEL) ...
£918.08
Price with VAT:
£1,101.70
KENNAMETAL
HERTEL
1-322-1006
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 4 ; MOUNT: D1-6 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.5990 ; BODY MATERIAL: CAST IRON (SEMI-STEEL)
£741.58
Price with VAT:
£889.90
KENNAMETAL
HERTEL
1-322-1206
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 12 ; NUMBER OF JAWS: 4 ; MOUNT: D1-6 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 3.1500 ; BODY MATERIAL: CAST IRON (SEMI-STEEL) ...
£1,223.61
Price with VAT:
£1,468.33
KENNAMETAL
HERTEL
1-201-0601
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 6 ; NUMBER OF JAWS: 3 ; MOUNT: FRONT MOUNT PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.6535 ; BODY MATERIAL: CA ...
£411.58
Price with VAT:
£493.89
KENNAMETAL
HERTEL
1-203-0800
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 4 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: CAST IRON (SEM ...
£499.83
Price with VAT:
£599.79
KENNAMETAL
HERTEL
1-221-1008
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 3 ; MOUNT: D1-8 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.9921 ; BODY MATERIAL: CAST IRON (SEMI-STE ...
£818.71
Price with VAT:
£982.45
KENNAMETAL
HERTEL
1-302-0600
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 6 ; NUMBER OF JAWS: 4 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.7720 ; BODY MATERIAL: CAST IRON (SEMI-S ...
£415.29
Price with VAT:
£498.34
KENNAMETAL
6694046
2MM X 20MM HSK100A TAPER SHANK ER32 COLLET CHUCK 209.9MM OAL, 160MM PROJECTION
£427.15
Price with VAT:
£512.58
KENNAMETAL
HERTEL
1-202-0400
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 4 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 0.7874 ; BODY MATERIAL: CAST IRON (SEM ...
£324.07
Price with VAT:
£388.89
KENNAMETAL
HERTEL
1-202-0801
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 3 ; MOUNT: FRONT MOUNT PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): .2.1654 ; BODY MATERIAL: C ...
£353.74
Price with VAT:
£424.48
KENNAMETAL
HERTEL
1-203-1200
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 12 ; NUMBER OF JAWS: 4 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 4.0551 ; BODY MATERIAL: CAST IRON (SE ...
£1,261.43
Price with VAT:
£1,513.72
KENNAMETAL
HERTEL
1-322-0804
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 4 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.2050 ; BODY MATERIAL: CAST IRON (SEMI-STEEL)
£608.84
Price with VAT:
£730.61
KENNAMETAL
HERTEL
1-322-1004
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 4 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.2360 ; BODY MATERIAL: CAST IRON (SEMI-STEEL) ...
£872.10
Price with VAT:
£1,046.52
KENNAMETAL
HERTEL
1-201-1000
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.9921 ; BODY MATERIAL: CAST IRON (SE ...
£450.14
Price with VAT:
£540.17
KENNAMETAL
1014175
9MM DA100 DA COLLET 36.53MM OAL, 19.53MM OVERALL DIAM, 0.03MM TIR
£17.80
Price with VAT:
£21.36
KENNAMETAL
1014721
TG/PG 100 14MM STANDARD SINGLE ANGLE COLLET 14MM TIR, 60.33MM OAL, 14MM OVERALL DIAM
£32.63
Price with VAT:
£39.16
KENNAMETAL
1014731
17/64" DA180 DA COLLET 41.28MM OAL, 26.29MM OVERALL DIAM, 0.03MM TIR
£20.76
Price with VAT:
£24.92
KENNAMETAL
1014753
TG/PG 100 20MM STANDARD SINGLE ANGLE COLLET 20MM TIR, 60.33MM OAL, 20MM OVERALL DIAM
£32.63
Price with VAT:
£39.16
KENNAMETAL
1014754
9/32" DA180 DA COLLET 41.28MM OAL, 26.29MM OVERALL DIAM, 0.03MM TIR
£20.76
Price with VAT:
£24.92
KENNAMETAL
1014800
11/32" DA200 DA COLLET 30.18MM OAL, 13.69MM OVERALL DIAM, 0.03MM TIR
£15.57
Price with VAT:
£18.69
KENNAMETAL
1014803
23/64" DA180 DA COLLET 41.28MM OAL, 26.29MM OVERALL DIAM, 0.03MM TIR
£20.76
Price with VAT:
£24.92
KENNAMETAL
1014824
23/64" DA200 DA COLLET 30.18MM OAL, 13.69MM OVERALL DIAM, 0.03MM TIR
£15.57
Price with VAT:
£18.69
KENNAMETAL
1014827
3/8" DA180 DA COLLET 41.28MM OAL, 26.29MM OVERALL DIAM, 0.03MM TIR
£20.76
Price with VAT:
£24.92
KENNAMETAL
1014251
4.5MM DA300 DA COLLET 1" OAL, 9.53MM OVERALL DIAM, 0.03MM TIR
£15.57
Price with VAT:
£18.69
KENNAMETAL
1014475
8MM DA180 DA COLLET 41.28MM OAL, 26.29MM OVERALL DIAM, 0.03MM TIR
£20.76
Price with VAT:
£24.92
KENNAMETAL
1014540
5/64" DA200 DA COLLET 30.18MM OAL, 13.69MM OVERALL DIAM, 0.03MM TIR
£28.18
Price with VAT:
£33.82
KENNAMETAL
1014608
5/32" DA100 DA COLLET 36.53MM OAL, 19.53MM OVERALL DIAM, 0.03MM TIR
£26.70
Price with VAT:
£32.04
KENNAMETAL
1014611
5/32" DA300 DA COLLET 1" OAL, 9.53MM OVERALL DIAM, 0.03MM TIR
£15.57
Price with VAT:
£18.69