SEARCH NOW FOR ALL YOUR KENNAMETAL SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
KENNAMETAL
1080543
TG/PG 100 8MM COOLANT SINGLE ANGLE COLLET 8MM TIR, 60.33MM OAL, 8MM OVERALL DIAM
£77.12
Price with VAT:
£92.55
KENNAMETAL
1086425
0.51MM X 10.41MM HSK63 HOLLOW TAPER ER ER16 COLLET CHUCK 132MM OAL, 100MM PROJECTION, BALANCED TO 15,000 RPM, THROUGH-SPINDLE COOLANT
£348.54
Price with VAT:
£418.25
KENNAMETAL
1105159
TG/PG 75 3/4" COOLANT SINGLE ANGLE COLLET 19.05MM TIR, 46.81MM OAL, 19.05MM OVERALL DIAM
£77.12
Price with VAT:
£92.55
KENNAMETAL
1288285
0.51MM X 7.11MM STRAIGHT SHANK ER11 COLLET CHUCK 132MM OAL, 32MM PROJECTION, 0.0025MM TIR, BALANCED TO 8,000 RPM, THROUGH-SPINDLE COOLANT
£153.51
Price with VAT:
£184.21
KENNAMETAL
1297414
2.5MM DA300 DA COLLET 1" OAL, 9.53MM OVERALL DIAM, 0.03MM TIR
£24.47
Price with VAT:
£29.37
KENNAMETAL
2018679
INSERT SCREW FOR INDEXABLES: T8 TORX, (MOQ=1, PKG QTY=1)
£6.23
Price with VAT:
£7.48
KENNAMETAL
2637154
HSK100, 3 TO 15.88MM CAPACITY, TAPERED MOUNT DRILL CHUCK KEYED, 52MM SLEEVE DIAM, 125MM OPEN LENGTH
£1,021.90
Price with VAT:
£1,226.28
KENNAMETAL
3587212
CAP SCREW FOR INDEXABLES 3MM SOCKET HEX, BUTTON HEAD, CARTRIDGE COMPATIBLE, SERIES MODBORE
£12.61
Price with VAT:
£15.13
KENNAMETAL
5525688
100MM HSK100A TAPER SHANK DIAM TENSION & COMPRESSION TAPPING CHUCK M10 TO M20 TAP CAPACITY, 118.9MM PROJECTION, THROUGH COOLANT
£1,374.15
Price with VAT:
£1,648.98
KENNAMETAL
6135417
ROTARY TOOL HOLDER TORQUE WRENCH INSERT COMPATIBLE WITH DL20 CONNECTION SIZE
£88.99
Price with VAT:
£106.79
KENNAMETAL
HERTEL
300-001503
#1 60° 1/8" BODY DIAM SOLID CARBIDE COMBO DRILL & COUNTERSINK TIN FINISH, 1-1/2" OAL, DOUBLE END, RH CUT, PLAIN EDGE, 3/64" DRILL POINT DIAM, 3/64" DRILL POINT LENGTH
✓ IN STOCK!
£14.50
Price with VAT:
£17.40
KENNAMETAL
HERTEL
MCLNR124B
INDEXABLE TURNING TOOLHOLDER, 3/4IN X 3/4IN SHANK, SCREW CLAMP, RIGHT HAND,
✓ IN STOCK!
£87.70
Price with VAT:
£105.24
KENNAMETAL
HERTEL
1-201-1001
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 3 ; MOUNT: FRONT MOUNT PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.9921 ; BODY MATERIAL: C ...
£451.62
Price with VAT:
£541.95
KENNAMETAL
HERTEL
1-221-0604
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 6 ; NUMBER OF JAWS: 3 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.1635 ; BODY MATERIAL: CAST IRON (SEMI-STEE ...
£558.41
Price with VAT:
£670.09
KENNAMETAL
HERTEL
1-221-0804
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 3 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: CAST IRON (SEMI-STEE ...
£886.19
Price with VAT:
£1,063.43
KENNAMETAL
HERTEL
1-312-1006
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 4 ; MOUNT: A2-6 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.5590 ; BODY MATERIAL: CAST IRON (SEMI-STEEL) ...
£918.08
Price with VAT:
£1,101.70
KENNAMETAL
HERTEL
1-322-1006
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 4 ; MOUNT: D1-6 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.5990 ; BODY MATERIAL: CAST IRON (SEMI-STEEL)
£741.58
Price with VAT:
£889.90
KENNAMETAL
HERTEL
1-322-1206
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 12 ; NUMBER OF JAWS: 4 ; MOUNT: D1-6 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 3.1500 ; BODY MATERIAL: CAST IRON (SEMI-STEEL) ...
£1,223.61
Price with VAT:
£1,468.33
KENNAMETAL
HERTEL
1-201-0601
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 6 ; NUMBER OF JAWS: 3 ; MOUNT: FRONT MOUNT PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.6535 ; BODY MATERIAL: CA ...
£411.58
Price with VAT:
£493.89
KENNAMETAL
HERTEL
1-203-0800
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 4 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: CAST IRON (SEM ...
£499.83
Price with VAT:
£599.79
KENNAMETAL
HERTEL
1-221-1008
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 3 ; MOUNT: D1-8 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.9921 ; BODY MATERIAL: CAST IRON (SEMI-STE ...
£818.71
Price with VAT:
£982.45
KENNAMETAL
HERTEL
1-302-0600
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 6 ; NUMBER OF JAWS: 4 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.7720 ; BODY MATERIAL: CAST IRON (SEMI-S ...
£415.29
Price with VAT:
£498.34
KENNAMETAL
HERTEL
1-202-0400
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 4 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 0.7874 ; BODY MATERIAL: CAST IRON (SEM ...
£324.07
Price with VAT:
£388.89
KENNAMETAL
HERTEL
1-202-0801
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 3 ; MOUNT: FRONT MOUNT PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): .2.1654 ; BODY MATERIAL: C ...
£353.74
Price with VAT:
£424.48
KENNAMETAL
HERTEL
1-203-1200
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 12 ; NUMBER OF JAWS: 4 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 4.0551 ; BODY MATERIAL: CAST IRON (SE ...
£1,261.43
Price with VAT:
£1,513.72
KENNAMETAL
HERTEL
1-322-0804
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 4 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.2050 ; BODY MATERIAL: CAST IRON (SEMI-STEEL)
£608.84
Price with VAT:
£730.61
KENNAMETAL
HERTEL
1-322-1004
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 4 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.2360 ; BODY MATERIAL: CAST IRON (SEMI-STEEL) ...
£872.10
Price with VAT:
£1,046.52
KENNAMETAL
HERTEL
1-201-1000
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.9921 ; BODY MATERIAL: CAST IRON (SE ...
£450.14
Price with VAT:
£540.17
KENNAMETAL
HERTEL
1-103-0800
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8IN ; NUMBER OF JAWS: 6 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: FORGED STEEL ...
£834.28
Price with VAT:
£1,001.14
KENNAMETAL
HERTEL
1-202-0500
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 5 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.2598 ; BODY MATERIAL: CAST IRON (SEM ...
£350.77
Price with VAT:
£420.92
KENNAMETAL
HERTEL
1-203-0500
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 5 ; NUMBER OF JAWS: 4 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.2598 ; BODY MATERIAL: CAST IRON (SEM ...
£394.52
Price with VAT:
£473.43
KENNAMETAL
HERTEL
1-203-0600
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 6 ; NUMBER OF JAWS: 4 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.6535 ; BODY MATERIAL: CAST IRON (SEM ...
£336.68
Price with VAT:
£404.01
KENNAMETAL
HERTEL
1-203-1000
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.9921 ; BODY MATERIAL: CAST IRON (SE ...
£708.21
Price with VAT:
£849.85
KENNAMETAL
HERTEL
1-103-1200
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 12IN ; NUMBER OF JAWS: 6 ; MATERIAL: FORGED STEEL ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER: 4.0551IN1-103-1200
£1,879.91
Price with VAT:
£2,255.90
KENNAMETAL
HERTEL
1-201-0500
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 5 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.2598 ; BODY MATERIAL: CAST IRON (SEM ...
£347.06
Price with VAT:
£416.47
KENNAMETAL
HERTEL
1-322-1208
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 12 ; NUMBER OF JAWS: 4 ; MOUNT: D1-8 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 3.1500 ; BODY MATERIAL: CAST IRON (SEMI-STEEL)
£1,079.00
Price with VAT:
£1,294.80
KENNAMETAL
HERTEL
1-101-0600
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 6IN ; NUMBER OF JAWS: 3 ; MATERIAL: FORGED STEEL ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER: 1.6535IN
£491.67
Price with VAT:
£590.00
KENNAMETAL
HERTEL
1-101-1000
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10IN ; NUMBER OF JAWS: 3 ; MATERIAL: FORGED STEEL ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER: 2.9921IN
£737.88
Price with VAT:
£885.45
KENNAMETAL
HERTEL
1-201-0800
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: CAST IRON (SEM ...
£470.91
Price with VAT:
£565.09
KENNAMETAL
HERTEL
1-201-0801
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 3 ; MOUNT: FRONT MOUNT PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: CA ...
£579.18
Price with VAT:
£695.01
KENNAMETAL
HERTEL
1-202-0600
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 6 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.1635 ; BODY MATERIAL: CAST IRON (SEM ...
£496.12
Price with VAT:
£595.34
KENNAMETAL
HERTEL
1-221-1006
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 3 ; MOUNT: D1-6 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.9921 ; BODY MATERIAL: CAST IRON (SEMI-STE ...
£783.11
Price with VAT:
£939.73
KENNAMETAL
HERTEL
8000161
3/8" INSCRIBED CIRCLE, DIAMOND (SHAPE) EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, ICSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£14.83
Price with VAT:
£17.80
KENNAMETAL
HERTEL
8000169
3/8" INSCRIBED CIRCLE, SQUARE EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, ISSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£8.90
Price with VAT:
£10.68