SEARCH NOW FOR ALL YOUR KENNAMETAL SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
KENNAMETAL
HERTEL
CH-SA-56212
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: FLAT TIP ; FOR SPINDLE DIAMETER (INCH): 5/16 ; THREAD SIZE: 5/16-18 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (INCH): ...
£1.07
Price with VAT:
£1.28
KENNAMETAL
HERTEL
CH-SA-38300
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: FLAT TIP ; FOR SPINDLE DIAMETER (INCH): 3/8 ; THREAD SIZE: 3/8-16 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (INCH): 3 ...
£4.90
Price with VAT:
£5.88
KENNAMETAL
HERTEL
CH-SA-14134
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: FLAT TIP ; FOR SPINDLE DIAMETER (INCH): 1/4 ; THREAD SIZE: 1/4-20 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (INCH): 1- ...
£1.04
Price with VAT:
£1.25
KENNAMETAL
HERTEL
CH-FC-053508 PB
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: CAP; TYPE: CAP; FOR SPINDLE DIAMETER (MM): M5; FOR SPINDLE DIAMETER (MM - 0 DECIMALS): M5; THREAD SIZE: M5 X 0.8; THREAD SIZE: M5 X 0.8; MATE ...
£3.95
Price with VAT:
£4.74
KENNAMETAL
HERTEL
CH-FC-108515 PB
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: CAP ; FOR SPINDLE DIAMETER (MM - 0 DECIMALS): M10 ; THREAD SIZE: M10X1.5 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (MM ...
£2.92
Price with VAT:
£3.50
KENNAMETAL
HERTEL
CH-FW-120
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; OVERALL WIDTH (DECIMAL INCH - 4 DECIMALS): 0.9720 ; MATERIAL: CARBON STEEL ; HOLE DIAMETER: 0.5100 ; FINISH COATING: ZINC ; UNSPSC CODE: 31161800 ( ...
£8.91
Price with VAT:
£10.69
KENNAMETAL
HERTEL
CH-FW-380
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; OVERALL WIDTH (DECIMAL INCH - 4 DECIMALS): 0.7500 ; MATERIAL: CARBON STEEL ; HOLE DIAMETER: 0.4000 ; FINISH COATING: ZINC ; UNSPSC CODE: 31161800 ( ...
£0.31
Price with VAT:
£0.37
KENNAMETAL
HERTEL
CH-FW-080
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; OVERALL WIDTH (DECIMAL INCH - 4 DECIMALS): 0.3260 ; MATERIAL: CARBON STEEL ; HOLE DIAMETER: 0.1690 ; FINISH COATING: ZINC ; UNSPSC CODE: 31161800 ( ...
£0.43
Price with VAT:
£0.52
KENNAMETAL
HERTEL
CH-FC-086312
CLAMP SPINDLE RETAINERS & FLANGED WASHERS, TYPE, CAP, TYPE, CAP, FOR SPINDLE DIAMETER (MM), M8, FOR SPINDLE DIAMETER (MM - 0 DECIMALS), M8, THREAD SIZE, M8 X 1.25, THREAD SIZE, M8 X 1.25, MA ...
£1.01
Price with VAT:
£1.21
KENNAMETAL
HERTEL
CH-FC-064410
CLAMP SPINDLE RETAINERS & FLANGED WASHERS, TYPE, CAP, TYPE, CAP, FOR SPINDLE DIAMETER (MM), M6, FOR SPINDLE DIAMETER (MM - 0 DECIMALS), M6, THREAD SIZE, M6 X 1.0, THREAD SIZE, M6 X 1.0, MATE ...
£3.45
Price with VAT:
£4.14
KENNAMETAL
HERTEL
CH-FC-121017
CLAMP SPINDLE RETAINERS & FLANGED WASHERS, TYPE, CAP, TYPE, CAP, FOR SPINDLE DIAMETER (MM), M12, FOR SPINDLE DIAMETER (MM - 0 DECIMALS), M12, THREAD SIZE, M12X1.75, THREAD SIZE, M12X1.75, MA ...
£2.07
Price with VAT:
£2.49
KENNAMETAL
HERTEL
CH-SA-08034-T2
CLAMP SPINDLE ASSEMBLIES; APPLICATION: TOGGLE CLAMPS ; SPINDLE MATERIAL: NYLON ; THREAD SIZE: #5-32 ; THREAD LENGTH (MM): 0.7500 ; TIP TYPE: HEX ; TIP SURFACE DIAMETER (DECIMAL INCH): 0.1563 ...
£0.48
Price with VAT:
£0.57
KENNAMETAL
HERTEL
CH-SA-08034-T1
CLAMP SPINDLE ASSEMBLIES; APPLICATION: TOGGLE CLAMPS ; SPINDLE MATERIAL: NYLON ; THREAD SIZE: #5-32 ; THREAD LENGTH (MM): 0.7500 ; TIP TYPE: HEX ; TIP SURFACE DIAMETER (DECIMAL INCH): 0.1563 ...
£0.50
Price with VAT:
£0.60
KENNAMETAL
HERTEL
CH-36202-05
CLAMP NUTS; THREAD SIZE: 5/8-18 ; PRODUCT COMPATIBILITY: TOGGLE CLAMPS ; UNSPSC CODE: 27112100 (MOQ=1, PKG QTY=1)CH-36202-05
£1.51
Price with VAT:
£1.81
KENNAMETAL
HERTEL
CH-36204-05
CLAMP NUTS; THREAD SIZE: 3/4-16 ; PRODUCT COMPATIBILITY: TOGGLE CLAMPS (MOQ=1, PKG QTY=1)CH-36204-05
£1.66
Price with VAT:
£1.99
KENNAMETAL
HERTEL
CH-36224-05
CLAMP NUTS; THREAD SIZE: 1-14 ; PRODUCT COMPATIBILITY: TOGGLE CLAMPS ; UNSPSC CODE: 27112100 (MOQ=1, PKG QTY=1)CH-36224-05
£1.97
Price with VAT:
£2.36
KENNAMETAL
HERTEL
MR34-0433.406
CHUCKING REAMER, 1 - 2 MM DIAMETER RANGE, 1.1 MM DIAMETER, SOLID CARBIDE, SPIRAL FLUTE, LEFT HAND SPIRAL, BRIGHT/UNCOATED, STRAIGHT-CLYINDRICAL SHANK, NO DOWELL PIN REAMER, 50 MM LENGTH, 4 F ...
£51.97
Price with VAT:
£62.36
KENNAMETAL
SNMG434
CHIP CONTROL INSERT, SNMG120416B, PRICE/EACH
✓ IN STOCK!
£10.02
Price with VAT:
£12.02
KENNAMETAL
1130303
CENTRAL LOCK SCREW FOR INDEXABLES: M5/M4X23", (MOQ=10, PKG QTY=1)1130303
£14.85
Price with VAT:
£17.82
KENNAMETAL
1130313
CENTRAL LOCK SCREW FOR INDEXABLES: 1/4-18 THREAD, (MOQ=10, PKG QTY=1)1130313
£14.85
Price with VAT:
£17.82
KENNAMETAL
1130295
CENTRAL LOCK SCREW FOR INDEXABLES: 1/4-18 THREAD, (MOQ=10, PKG QTY=1)1130295
£14.85
Price with VAT:
£17.82
KENNAMETAL
4.81501R631/241-EACH
CARBONE INSERT .625DECIMALS BLACK ( PACK OF 10 )
✓ IN STOCK!
£0.50
Price with VAT:
£0.60
KENNAMETAL
HERTEL
CH-FW-141
CARBON STEEL, FLANGED WASHER FOR M6 DIAM CLAMP SPINDLE (MOQ=1, PKG QTY=1)CH-FW-141
£7.13
Price with VAT:
£8.55
KENNAMETAL
6151567
CARBIDE TURNING INSERT, 3/4IN INSCRIBED CIRCLE, RCMH64 K GRADE,
✓ IN STOCK!
£16.79
Price with VAT:
£20.14
KENNAMETAL
IB1913416-TN6515
CARBIDE INSERT SCREW-ON MILLING GRADE TN6515
✓ IN STOCK!
£5.52
Price with VAT:
£6.63
KENNAMETAL
IB1913417-SP1RVL
CARBIDE INSERT SCREW-IN TURNING GROOVING, PRICE/EACH
✓ IN STOCK!
£1.70
Price with VAT:
£2.04
KENNAMETAL
1023244
CAP SCREW FOR INDEXABLES: TP9 TORX PLUS, (MOQ=10, PKG QTY=1)1023244
£1.38
Price with VAT:
£1.66
KENNAMETAL
1023315
CAP SCREW FOR INDEXABLES: TP15 TORX PLUS, (MOQ=20, PKG QTY=1)1023315
£6.24
Price with VAT:
£7.48
KENNAMETAL
1122180
CAP SCREW FOR INDEXABLES: TORX, (MOQ=10, PKG QTY=1)1122180
£5.79
Price with VAT:
£6.95
KENNAMETAL
1021047
CAP SCREW FOR INDEXABLES: T8 TORX, M3 X 0.5 THREAD, (MOQ=1, PKG QTY=1)
£2.51
Price with VAT:
£3.02
KENNAMETAL
1020941
CAP SCREW FOR INDEXABLES: T8 TORX, M2.6 X 0.45 THREAD, (MOQ=10, PKG QTY=1)1020941
£2.28
Price with VAT:
£2.74
KENNAMETAL
1099615
CAP SCREW FOR INDEXABLES: T7 TORX, M2.5 X 0.45 THREAD, (MOQ=10, PKG QTY=1)1099615
£6.24
Price with VAT:
£7.48
KENNAMETAL
1023257
CAP SCREW FOR INDEXABLES: T7 TORX, M2.5 X 0.45 THREAD, (MOQ=1, PKG QTY=10)1023257
£22.27
Price with VAT:
£26.73
KENNAMETAL
1092070
CAP SCREW FOR INDEXABLES: T7 TORX, (MOQ=20, PKG QTY=1)1092070
£5.79
Price with VAT:
£6.95
KENNAMETAL
1021337
CAP SCREW FOR INDEXABLES: T7 TORX, (MOQ=10, PKG QTY=1)1021337
£3.35
Price with VAT:
£4.02
KENNAMETAL
1130990
CAP SCREW FOR INDEXABLES: T6 TORX, (MOQ=10, PKG QTY=1)1130990
£6.24
Price with VAT:
£7.48
KENNAMETAL
1094300
CAP SCREW FOR INDEXABLES: T30 TORX, M6 X 1 THREAD, 0.87" OAL, (MOQ=10, PKG QTY=1)1094300
£9.65
Price with VAT:
£11.58
KENNAMETAL
1106668
CAP SCREW FOR INDEXABLES: T30 TORX, M6 X 1 THREAD, (MOQ=20, PKG QTY=1)1106668
£10.39
Price with VAT:
£12.47
KENNAMETAL
1915629
CAP SCREW FOR INDEXABLES: T25 TORX, (MOQ=10, PKG QTY=1)
£6.24
Price with VAT:
£7.48
