SEARCH NOW FOR ALL YOUR MA FORD SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
MA FORD
20510940
DRILL BIT, BRIGHT FINISH, 7/64", 135 SPIRAL FLUTE, SOLID CARBIDE, RIGHT HAND CUT, 13/16" FLUTE LENGTH, 1-13/16" OAL, SPLIT POINT, STRAIGHT SHANK
£13.35
Price with VAT:
£16.02
MA FORD
22909380
JOBBER LENGTH DRILL BIT, 3/32" DIA, 150 °, SOLID CARBIDE BRIGHT COATED, 2" OAL, RIGHT HAND CUT, PARABOLIC FLUTE, STRAIGHT-CYLINDRICAL SHANK, SERIES 229
£20.76
Price with VAT:
£24.92
MA FORD
41375150E
ABRASIVE BUR, SB-3NF, CYLINDER WITH END CUT 1/4" SHANK (MOQ=1, PKG QTY=1)
£27.44
Price with VAT:
£32.93
MA FORD
41625150
ABRASIVE BUR, SA-6NF, CYLINDER 1/4" SHANK (MOQ=1, PKG QTY=1)
£48.94
Price with VAT:
£58.73
MA FORD
43375150
ABRASIVE BUR, SD-3NF, BALL 1/4" SHANK (MOQ=1, PKG QTY=1)
£22.25
Price with VAT:
£26.70
MA FORD
41500150
ABRASIVE BUR, SA-5NF, CYLINDER 1/4" SHANK (MOQ=1, PKG QTY=1)
£35.60
Price with VAT:
£42.72
MA FORD
43500150
ABRASIVE BUR, SD-5NF, BALL 1/4" SHANK (MOQ=1, PKG QTY=1)
£28.92
Price with VAT:
£34.71
MA FORD
69130020
ABRASIVE BUR, SM-42, CONE 1/8" SHANK (MOQ=1, PKG QTY=1)
£8.16
Price with VAT:
£9.79
MA FORD
45500150
ABRASIVE BUR, SF-5NF, TREE WITH RADIUS 1/4" SHANK (MOQ=1, PKG QTY=1)
£39.30
Price with VAT:
£47.16
MA FORD
42375027
ABRASIVE BUR, SC-3-D, CYLINDER WITH RADIUS 1/4" SHANK (MOQ=1, PKG QTY=1)
£13.35
Price with VAT:
£16.02
MA FORD
43250020
ABRASIVE BUR, SD-1, BALL 1/4" SHANK (MOQ=1, PKG QTY=1)
£14.83
Price with VAT:
£17.80
MA FORD
43250027
ABRASIVE BUR, SD-1-D, BALL 1/4" SHANK (MOQ=1, PKG QTY=1)
£14.83
Price with VAT:
£17.80
MA FORD
43500027
ABRASIVE BUR, SD-5-D, BALL 1/4" SHANK (MOQ=1, PKG QTY=1)
£21.51
Price with VAT:
£25.81
MA FORD
69150027
SL-42-D, 1/8" CUT DIAM, 1/8" SHANK DIAM, CARBIDE DOUBLE CUT TAPER BURR 1-1/2" OAL, 1/2" LOC, 8° INCLUDED ANGLE, RADIUS END
£8.16
Price with VAT:
£9.79
MA FORD
41250027
SA-1-D, 1/4" CUT DIAM, 1/4" SHANK DIAM, CARBIDE DOUBLE CUT CYLINDER BURR 2" OAL, 5/8" LOC, FLAT END
£13.35
Price with VAT:
£16.02
MA FORD
41250030
SA-1, 1/4" CUT DIAM, 1/4" SHANK DIAM, CARBIDE DOUBLE CUT CYLINDER BURR UNCOATED FINISH, 2" OAL, 5/8" LOC, FLAT END
£17.80
Price with VAT:
£21.36
MA FORD
41375027
SA-3-D, 3/8" CUT DIAM, 1/4" SHANK DIAM, CARBIDE DOUBLE CUT CYLINDER BURR 2-3/4" OAL, 3/4" LOC, FLAT END
£21.51
Price with VAT:
£25.81
MA FORD
69050020
ABRASIVE BUR, SD-42, BALL 1/8" SHANK (MOQ=1, PKG QTY=1)
£8.16
Price with VAT:
£9.79
MA FORD
45500020
SF-5, 1/2" CUT DIAM, 1/4" SHANK DIAM, CARBIDE SINGLE CUT TREE WITH RADIUS BURR 3" OAL, 1" LOC, RADIUS END
£33.37
Price with VAT:
£40.05
MA FORD
48375027
SL-3-D, 3/8" CUT DIAM, 1/4" SHANK DIAM, CARBIDE DOUBLE CUT TAPER BURR 3-3/16" OAL, 1-1/8" LOC, 14° INCLUDED ANGLE, RADIUS END
£22.25
Price with VAT:
£26.70
MA FORD
48500020
SL-4, 1/2" CUT DIAM, 1/4" SHANK DIAM, CARBIDE SINGLE CUT TAPER BURR 3-1/4" OAL, 1-3/16" LOC, 14° INCLUDED ANGLE, RADIUS END
£28.92
Price with VAT:
£34.71
MA FORD
69140030
SM-43, 1/8" CUT DIAM, 1/8" SHANK DIAM, CARBIDE DOUBLE CUT CONE BURR UNCOATED FINISH, 1-1/2" OAL, 5/8" LOC, 14° INCLUDED ANGLE, POINT END
£11.12
Price with VAT:
£13.35
MA FORD
44375150
ABRASIVE BUR, SE-3NF, OVAL 1/4" SHANK (MOQ=1, PKG QTY=1)
£28.18
Price with VAT:
£33.82
MA FORD
48375150
SL-3NF, 3/8" CUT DIAM, 1/4" SHANK DIAM, CARBIDE SINGLE CUT TAPER BURR 3-3/16" OAL, 1-1/8" LOC, 14° INCLUDED ANGLE, RADIUS END
£23.73
Price with VAT:
£28.48
MA FORD
42250027
ABRASIVE BUR, SC-1-D, CYLINDER WITH RADIUS 1/4" SHANK (MOQ=1, PKG QTY=1)
£11.87
Price with VAT:
£14.24
MA FORD
69150020
SL-42, 1/8" CUT DIAM, 1/8" SHANK DIAM, CARBIDE SINGLE CUT TAPER BURR 1-1/2" OAL, 1/2" LOC, 8° INCLUDED ANGLE, RADIUS END
£8.16
Price with VAT:
£9.79
MA FORD
41625150E
ABRASIVE BUR, SB-6NF, CYLINDER WITH END CUT 1/4" SHANK (MOQ=1, PKG QTY=1)
£59.33
Price with VAT:
£71.19
MA FORD
78125003
COUNTERSINK, 90.00 DEG INCLUDED ANGLE, 6 FLUTE, SOLID CARBIDE, RIGHT HAND 1/2 SHANK DIA, 3 OAL, BRIGHT/UNCOATED FINISH (MOQ=1, PKG QTY=1)
£132.74
Price with VAT:
£159.29
MA FORD
67150002
COUNTERSINK, 82.00 DEG INCLUDED ANGLE, 0 FLUTE, HIGH-SPEED STEEL, RIGHT HAND 1/2 SHANK DIA, 3-1/2 OAL, BRIGHT/UNCOATED FINISH
£77.90
Price with VAT:
£93.48
MA FORD
42312530
SC-2, 5/16" CUT DIAM, 1/4" SHANK DIAM, CARBIDE DOUBLE CUT CYLINDER WITH RADIUS BURR UNCOATED FINISH, 2-3/4" OAL, 3/4" LOC, RADIUS END
£23.73
Price with VAT:
£28.48
MA FORD
45375027M
SF-3M-D, 9.5MM CUT DIAM, 6MM SHANK DIAM, CARBIDE DOUBLE CUT TREE WITH RADIUS BURR UNCOATED FINISH, 64MM OAL, 19MM LOC, RADIUS END
£13.35
Price with VAT:
£16.02
MA FORD
69010027L3
ABRASIVE BUR, SA-43L3-D,BALL CYLINDER OVAL & TREE 1/8" SHANK (MOQ=1, PKG QTY=1)
£11.12
Price with VAT:
£13.35
MA FORD
72090020
ABRASIVE BUR, SG-53, TREE 1/8" SHANK (MOQ=1, PKG QTY=1)
£13.35
Price with VAT:
£16.02
MA FORD
41250027E
SB-1-D, 1/4" CUT DIAM, 1/4" SHANK DIAM, CARBIDE DOUBLE CUT CYLINDER WITH END CUT BURR 2" OAL, 5/8" LOC, END CUT
£19.28
Price with VAT:
£23.14
MA FORD
41500027
ABRASIVE BUR, SA-5-D, CYLINDER 1/4" SHANK (MOQ=1, PKG QTY=1)
£26.70
Price with VAT:
£32.04
MA FORD
46250020
ABRASIVE BUR, SG-1, TREE 1/4" SHANK (MOQ=1, PKG QTY=1)
£16.31
Price with VAT:
£19.58
MA FORD
69030020
ABRASIVE BUR, SC-42, CYLINDER WITH RADIUS 1/8" SHANK (MOQ=1, PKG QTY=1)
£8.16
Price with VAT:
£9.79
MA FORD
29605007A
SJ-5-D, 1/2" CUT DIAM, 1/4" SHANK DIAM, CARBIDE DOUBLE CUT 60° ANGLE TOOL BURR ALTIN FINISH, 2.7609" OAL, 7/16" LOC, 60° INCLUDED ANGLE, 1/2" HEAD THICKNESS, POINT END
£28.18
Price with VAT:
£33.82
MA FORD
48312527
ABRASIVE BUR, SL-2-D, 5/16" CUT DIA, CONICAL RADIUS END, DOUBLE CUT 1/4" SHANK DIA, 15/16" LOC, 3" OAL (MOQ=1, PKG QTY=1)
£20.02
Price with VAT:
£24.03
MA FORD
70030020
ABRASIVE BUR, SD-51, BALL 1/8" SHANK (MOQ=1, PKG QTY=1)
£8.90
Price with VAT:
£10.68
MA FORD
71020027
6 PC DIAMOND CUT BURR SET WITH BALL, CYLINDER, CYLINDER W/RAD END, TAPER, TREE W/POINTED END, TREE W/RAD END 1/8" CUT DIAM, TUNGSTEN CARBIDE, 1/8" SHANK DIAM (MOQ=1, PKG QTY=1)
£31.89
Price with VAT:
£38.27
MA FORD
71030027
10 PC DIAMOND CUT BURR SET WITH BALL, CONE, CYLINDER, CYLINDER W/RAD END, INVERTED TAPER, OVAL, TAPER, TREE W/POINTED END, TREE W/RAD END 1/8" CUT DIAM, TUNGSTEN CARBIDE, 1/8" SHANK DIAM
£84.54
Price with VAT:
£101.45
MA FORD
43500020
ABRASIVE BUR, SD-5, BALL 1/4" SHANK (MOQ=1, PKG QTY=1)
£21.51
Price with VAT:
£25.81
MA FORD
69130030
ABRASIVE BUR, SM-42, CONE 1/8" SHANK (MOQ=1, PKG QTY=1)
£6.23
Price with VAT:
£7.48
MA FORD
11104000A
SQUARE END MILL: 0.04'' DIA, 0.12'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 4 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)
£15.57
Price with VAT:
£18.69
MA FORD
135B12501
BALL END MILL: 1/8" DIA, 19/64" LOC, 2 FLUTE(S), SOLID CARBIDE (MOQ=1, PKG QTY=1)
£22.25
Price with VAT:
£26.70
MA FORD
135B25000
BALL END MILL: 0.25" DIA, 0.5" LOC, 2 FLUTE, SOLID CARBIDE (MOQ=1, PKG QTY=1)
£23.73
Price with VAT:
£28.48
MA FORD
135B25001
BALL END MILL: 0.25" DIA, 0.75" LOC, 2 FLUTE, SOLID CARBIDE (MOQ=1, PKG QTY=1)
£24.47
Price with VAT:
£29.37
