SEARCH NOW FOR ALL YOUR NANOTEC SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
NANOTEC
PD4-N5918X4204
MOTOR, PLUG & DRIVE, 56MM, 0.8NM; SUPPLY VOLTAGE RANGE:24V DC TO 48V DC; NO. OF PHASES:TWO; TORQUE MAX:0.537N-M; EXTERNAL HEIGHT:56.4MM; SVHC:NO SVHC
£283.49
Price with VAT:
£340.19
NANOTEC
ST6318F1004-A
STEPPER MOTOR, 2 PHASE, 3.8VDC, 1A; STEPPER MOTOR TYPE:SINGLE SHAFT; MOTOR SIZE:-; COIL TYPE:BIPOLAR, UNIPOLAR; STEP ANGLE:1.8°; TORQUE MAX:0.064N-M; CURRENT RATING:1A; VOLTAGE RATING MAX:3. ...
£70.49
Price with VAT:
£84.59
NANOTEC
ST5709L1108-B
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR, 0.9DEG, 2 PHASE; COIL TYPE:UNIPOLAR / BIPOLAR; TORQUE MAX:135N-CM; CURRENT RATING:1.1A; NO. OF PHASES:TWO; RESISTANCE:7.2OHM; INDUCTANC
£97.78
Price with VAT:
£117.34
NANOTEC
ST2818S1006-B
STEPPER MOTOR, 1.8 DEG, 2 PHASE; COIL TYPE:UNIPOLAR / BIPOLAR; TORQUE MAX:4.3N-CM; CURRENT RATING:950MA; NO. OF PHASES:TWO; RESISTANCE:2.8OHM; INDUCTA
£40.17
Price with VAT:
£48.21
NANOTEC
ST2818M1006-B
STEPPER MOTOR, 0.9DEG, 2 PHASE; COIL TYPE:UNIPOLAR / BIPOLAR; TORQUE MAX:7.5N-CM; CURRENT RATING:950MA; NO. OF PHASES:TWO; RESISTANCE:3.4OHM; INDUCTAN
£47.75
Price with VAT:
£57.31
NANOTEC
SP3575M0906-A
STEPPER MOTOR, 7.5DEG; COIL TYPE:UNIPOLAR / BIPOLAR; TORQUE MAX:5.5N-CM; CURRENT RATING:860MA; NO. OF PHASES:TWO; RESISTANCE:5.8OHM; INDUCTANCE:6.5MH;
£21.98
Price with VAT:
£26.38
NANOTEC
LSNUT-T6X2-F
NUT, T6X2; ACCESSORY TYPE:THREADED NUT; FOR USE WITH:LINEAR ACTUATORS; PRODUCT RANGE:-; SVHC:NO SVHC (27-JUN-2018) ROHS COMPLIANT: YES
£19.71
Price with VAT:
£23.65
NANOTEC
ST6018L3008-KGRA + GPLL52-4
STEPPER MOTOR W/GEARBOX, NEMA 24, SINGLE SHAFT, HIGH TORQUE, 2.5NM, 3A, KEYED SHAFT
£272.88
Price with VAT:
£327.46
NANOTEC
ST5718M2804-KVAT4
DISCONTINUED BY MANUFACTURER, MUNICH DIVISION, 1.8 DEGREE STEPPING MOTOR, 2.5V, 2.8A
£90.96
Price with VAT:
£109.15
NANOTEC
SMCI47-S-2
CLOSED LOOP STEPPER DRIVE/CONTROLLER, 10.5A, 24-48VDC INPUT, INTERFACE: RS485
£486.91
Price with VAT:
£584.30
NANOTEC
STF2818X0504-A
STEPPER MOTOR, ULTRAFLAT, DC, 0.98 N-CM, 500 MA, TWO, 3.7 OHM, 880 H ROHS COMPLIANT: YES
£69.74
Price with VAT:
£83.68
Repair Yours
Contact Us
NANOTEC
DF45S024050-A2
DC MOTOR, BLDC, THREE, 30 W, 24 V, 6500 RPM, 0.44 N-M ROHS COMPLIANT: YES
£76.56
Price with VAT:
£91.87
Repair Yours
Contact Us
NANOTEC
DB59M024035-A
DC MOTOR, BLDC, THREE, 135 W, 24 V, 5000 RPM, 3.27 N-M ROHS COMPLIANT: YES
£115.98
Price with VAT:
£139.17
NANOTEC
DB59S0124035-A
BLDC MOTOR, 24V, 3500 RPM, 84W; SUPPLY VOLTAGE V DC:24V; NO. OF PHASES:THREE PHASE; POWER RATING:84W; ROTATIONAL SPEED MAX:3500RPM; TORQUE MAX:0.69N-M; PRODUCT RANGE:DB59 SERIES; SVHC:NO SVH ...
£55.33
Price with VAT:
£66.40
Repair Yours
Contact Us
NANOTEC
ST5918M3008-A
STEPPER MOTOR, HIGH TORQUE, DC, 0.88 N-M, 3 A, TWO, 0.7 OHM, 1.3 MH ROHS COMPLIANT: YES
£51.54
Price with VAT:
£61.85
Repair Yours
Contact Us
NANOTEC
ST4118X1404-A
STEPPER MOTOR, HIGH TORQUE, DC, 0.09 N-M, 1.4 A, TWO, 2 OHM, 1.6 MH ROHS COMPLIANT: YES
£28.80
Price with VAT:
£34.57
Repair Yours
Contact Us
NANOTEC
ST5709S1208-B
STEPPING MOTOR, STEPPER MOTOR TYPE:DUAL SHAFT, MOTOR SIZE:56.4MM, COIL TYPE:UNIPOLAR, STEP ANGLE:0.9, TORQUE MAX:0.75N-M, CURRENT RATING:1.2A, VOLTAGE RATING MAX:6VDC, NO. OF WIRES:8, EXTERN ...
£46.24
Price with VAT:
£55.49
NANOTEC
ST11018L8004-B
STEPPER MOTOR, 5.5-8 AMP, 500.67-1702.29 OZ-IN HOLDING TORQUE, 110 MM FLANGE
£162.12
Price with VAT:
£194.54
NANOTEC
APA-5618-C4004-A
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR, 5-PIN CABLE
£880.29
Price with VAT:
£1,056.35
NANOTEC
PD6-N8918M9504
PLUG & DRIVE MOTOR, RS485/CANOPEN, 6NM, 48V, 9.4A, CLOSED LOOP
£458.00
Price with VAT:
£549.60
NANOTEC
PD4-N5918L4204
DISCONTINUED BY MANUFACTURER, MOTOR, PLUG & DRIVE MOTOR, PD4-N SERIES, OPERATING VOLTAGE: 24/48 V, HOLDING TORQUE: 1.98 NM, LENGTH: 101 MM, NEMA 23 FRAME SIZE, RS485 OR CANOPEN INTERFACE
£410.00
Price with VAT:
£492.00
NANOTEC
ST6018L3008-A
STEPPER MOTOR, HIGH TORQUE, DC, 2.5 N-M, 3 A, TWO, 1.3 OHM, 3.2 MH, ROHS COMPLIANT: YES
£96.10
Price with VAT:
£115.32
Repair Yours
Contact Us
NANOTEC
AD8918L9504-EB
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR
£1,320.43
Price with VAT:
£1,584.52
NANOTEC
GPLE60-1S-8
DISCONTINUED BY MANUFACTURER, PRECISION PLANETARY GEARBOX, REDUCTION RATIO-8, MAX. OUTPUT TORQUE: 29 NM, RATED OUTPUT TORQUE: 18 NM, MAX. INPUT SPEED: 13000 RPM, ADMISSIBLE RADIAL SHAFT LOAD ...
£123.23
Price with VAT:
£147.88
NANOTEC
SP2575M0206-A
STEPPER MOTOR, 2 PHASE, 12 VDC, 240 MA, TORQUE MAX. 1.6N-CM, RESISTANCE: 50 OHM, INDUCTANCE: 16 MH, 6 WIRES, SINGLE SHAFT, COIL TYPE: BIPOLAR/UNIPOLAR, STEP ANGLE: 7.5", SHAFT DIAMETER: 2 MM ...
£14.00
Price with VAT:
£16.80
NANOTEC
SMCI12
CONTROLLER, STEPPER, 24V, 2.7A, SUPPLY VOLTAGE MIN:12VDC, SUPPLY VOLTAGE MAX:24VDC, NO. OF PHASES:-, POWER RATING:-, OUTPUT VOLTAGE MAX:30V, OUTPUT CURRENT:500MA, PRODUCT RANGE:-, SVHC:NO SV ...
£130.40
Price with VAT:
£156.48
NANOTEC
ASA8918M9504-KGAL
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR, WITH INTEGRATED CONTROLLER, ROUND FLANGE
£897.98
Price with VAT:
£1,077.58
NANOTEC
GPLE60-2S-12
PRECISION PLANETARY GEARBOXES, REDUCTION RATIO 12
RATED OUTPUT TORQUE 44 NM, MAX. INPUT SPEED 13000 RPM,
LENGTH "L" 59.5 MM, IP54 , FOR MOTOR SIZE NEMA 23, NEMA 24, OPERATING TEMPERATURE ...
£285.00
Price with VAT:
£342.00
NANOTEC
PGB-5618-L3204-A
STEPPER MOTOR ELECTRIC DC
£101.97
Price with VAT:
£122.36
Repair Yours
Contact Us
NANOTEC
C5-01
STEPPER MOTOR CTRL, BLDC, 48VDC; SUPPLY VOLTAGE MIN:12VDC; SUPPLY VOLTAGE MAX:48VDC; NO. OF PHASES:-; POWER RATING:-; OUTPUT VOLTAGE MAX:24V; OUTPUT CURRENT:100MA; PRODUCT RANGE:C5 SERIES; S ...
£177.08
Price with VAT:
£212.50
NANOTEC
AS4118L1804
STEPPER MOTOR, NEMA 17, IP65, SIZE 42 MM, 1.75 OHM, 50 NCM HOLDING TORQUE, 1.8 AMP, M12 CONNECTOR
£84.36
Price with VAT:
£101.23
Repair Yours
Contact Us
NANOTEC
AS2818L0604
STEPPER MOTOR, 2PHASE, M12 CONNECTOR, 1.1IN, IP65, 18OZ-IN, 7.2MH, NEMA 11, 0.67A PER WINDING, 9.2OHM PER WINDING, 18GCM2
£99.03
Price with VAT:
£118.84
Repair Yours
Contact Us
NANOTEC
ST4209S1006-B
STEPPER MOTOR, 0.9DEG, 2 PHASE; COIL TYPE:UNIPOLAR / BIPOLAR; TORQUE MAX:15N-CM; CURRENT RATING:950MA; NO. OF PHASES:TWO; RESISTANCE:4.2OHM; INDUCTANC
£31.54
Price with VAT:
£37.85
Repair Yours
Contact Us
NANOTEC
SMC42-2,0-1
DISCONTINUED BY MANUFACTURER, DRIVER, MICROSTEP, COMPACT, SUPPLY VOLTAGE RANGE: 21V DC TO 37 VDC, FREQUENCY RANGE: 0 HZ TO 50 KHZ, OUTPUT CURRENT: 2 A, SVHC:NO SVHC (19-DEC-2011)
£202.27
Price with VAT:
£242.72
NANOTEC
SMC42-1,0-1
DISCONTINUED BY MANUFACTURER, DRIVER, MICROSTEP, COMPACT; SUPPLY VOLTAGE RANGE:21V DC TO 37V DC; FREQUENCY RANGE:0HZ TO 50KHZ; OUTPUT CURRENT:1A; SVHC:NO SVHC (19-DEC-2011) ; EXTER
£198.06
Price with VAT:
£237.67
NANOTEC
LS4118S1404-T6X2-150
MOTOR, STEPPER, 41MM, 150MM; COIL TYPE:DC; TORQUE MAX:0.2N-M; CURRENT RATING:1.4A; NO. OF PHASES:TWO; RESISTANCE:2OHM; INDUCTANCE:3.6MH; SVHC:NO SVHC
£63.09
Price with VAT:
£75.71
Repair Yours
Contact Us
NANOTEC
4T5718M3308
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR 2.5V 3AMP
£82.16
Price with VAT:
£98.59
Repair Yours
Contact Us
NANOTEC
SH4018L1704-B
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR, 1.7 AMP, 2.9 V, FLANGE MOUNTED
£51.34
Price with VAT:
£61.61
Repair Yours
Contact Us
NANOTEC
PD4-N5918L4204-IP-2
STEPPER MOTOR, INTEGRAL DRIVE/CONTROLLER, NEMA 23, IP65, RS485 COMMUNICATION
£611.25
Price with VAT:
£733.50
NANOTEC
GPLE80-1S-3-F87
PRECISION PLANETARY GEARBOX, REDUCTION RATIO: 3, RATED OUTPUT TORQUE: 85NM, MAX OUTPUT TORQUE: 136NM, FOR NEMA34 MOTOR, 98% EFFICIENCY, MAX BACKLASH: 7 (ARC MINUTES), 4", IP54, 1.6" FLANGE L ...
£314.15
Price with VAT:
£376.98
NANOTEC
PD4-C5918M4204-E-08
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR, WITH INTEGRATED CONTROLLER, 4.2 AMPS-5.4 AMPS, 12-48 VDC, 4 DIGITIAL INPUTS, 1 ANALOG INPPUT, 2 DIGITAL OUTPUTS
£453.35
Price with VAT:
£544.02