SEARCH NOW FOR ALL YOUR NAPA SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
NIDEC CORP
JAPAN SERVO CO LTD
KA60KM2-552
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR / HYBRID, KA60 SERIES, NEMA 23, 1.8 DEGREE / STEP, 1.37 OHM, 4.5 MH, 50 MN-M, 2.2 AMP, 2 PHASE, 3.01 V, 2.36 X 2.36 INCH, 1.5 LBS.
✓ IN STOCK!
£6.04
Price with VAT:
£7.24
NIDEC CORP
JAPAN SERVO CO LTD
8H18N-21
GEAR HEAD, 8H10XN DECIMAL GEAR, 6.3 LB-IN, 18 RATIO, 100 RPM, 2-15 W, 3.15 X 3.15 INCH, FOR USH SYNCHRONOUS MOTOR
✓ IN STOCK!
£6.04
Price with VAT:
£7.24
NIDEC CORP
JAPAN SERVO CO LTD
CB52B3
AC CENTRIFUGAL BLOWER, 125X126X41MM, 208-230V, CB SERIES
✓ IN STOCK!
£6.26
Price with VAT:
£7.51
NIDEC CORP
JAPAN SERVO CO LTD
KH56JM2B043
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR / HYBRID, KH56 SERIES, CONTINUOUS DUTY, 1.8 DEGREE/ STEP, 3500 PPS, 1.4 AMP, 4 PHASE, 2 PHASE EXCITATION, 2.5 VDC
✓ IN STOCK!
£6.40
Price with VAT:
£7.68
NIDEC CORP
JAPAN SERVO CO LTD
TUDC12D4-929
BOX FAN DC BRUSHLESS 12VDC 0.9W DCTINY 25III
✓ IN STOCK!
£6.51
Price with VAT:
£7.81
NIDEC CORP
JAPAN SERVO CO LTD
CNDC24B7R
DC AXIAL FAN / BRUSHLESS, CNDC SERIES, 40 DB, 99 CFM, 2650 MIN/1, 4.8 W, 0.2 AMP, 24 VDC, 2-WIRE TERMINATION, 120 X 120 X 38 MM
✓ IN STOCK!
£8.77
Price with VAT:
£10.52
NIDEC CORP
JAPAN SERVO CO LTD
6H15N-21
GEAR HEAD, 37.50 OZ-IN, 2.6 X 10.4 NM, STANDARD SHAFT, 15 RATIO, 120 RPM, 3.0 W, 60 HZ, FOR REVERSIBLE MOTORS
✓ IN STOCK!
£6.59
Price with VAT:
£7.91
NIDEC CORP
JAPAN SERVO CO LTD
FBDC24H7
BLOWER / DC, FBDC MARK 3 SERIES, 52 DB, 26.5 CFM, 3700 R/MIN, 340 MA, 24 VDC
✓ IN STOCK!
£6.70
Price with VAT:
£8.04
NAPA
C81
V-BELT, CLASSICAL REPLACEMENT, 85IN CIRCUMFERENCE, 0.875IN TOP WIDTH, 0.531IN DEPTH
✓ IN STOCK!
£6.74
Price with VAT:
£8.09
NIDEC CORP
JAPAN SERVO CO LTD
E1033X12BYAP-26
DISCONTINUED BY MANUFACTURER, BLOWER 12VDC, 1.2AMP, BW123X94X33, W300X4X4, AS49198-01
✓ IN STOCK!
£6.74
Price with VAT:
£8.09
NAPA
NAPA BELTS & HOSES
B83
TIMING BELT INDUSTRIAL 21/32X86INCH
✓ IN STOCK!
£9.09
Price with VAT:
£10.91
Repair Yours
Contact Us
NAPA
NAPA GOLD FILTERS
1261
OIL FILTER, 25MICRON, 12-16GPM FLOW RATE, SPIN-ON
£6.82
Price with VAT:
£8.18
NIDEC CORP
JAPAN SERVO CO LTD
PUDC24H4C-049
DISCONTINUED BY MANUFACTURER, FAN, 24V, .16A, 3.8W, 80X25 MM, 2 WIRES
✓ IN STOCK!
£9.18
Price with VAT:
£11.02
NIDEC CORP
JAPAN SERVO CO LTD
8H9N-21
GEAR HEAD, STANDARD SHAFT, 93.06 OZ-IN, 9 RATIO, 200 RPM, 15 W, 60 HZ, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£6.94
Price with VAT:
£8.33
NIDEC CORP
JAPAN SERVO CO LTD
SCUDM24B4
FAN, SILENT FAN, 24VDC, 0.2A, 4.5W, 12CM
✓ IN STOCK!
£6.95
Price with VAT:
£8.34
NAPA
NAPA FILTERS
1500
DISCONTINUED BY MANUFACTURER, OIL FILTER, GOLD SERIES, 1500 1/2 TON FILTERS, SAFETY BY-PASS VALVE
£7.01
Price with VAT:
£8.41
NAPA
B140
BELT, SUPER GRIP, HEAVY DUTY V-BELT, B DESIGN, 3632MM OUTER CIRCUMFERENCE, 17MM WIDTH
✓ IN STOCK!
£7.03
Price with VAT:
£8.43
NIDEC CORP
JAPAN SERVO CO LTD
8H375N-21
GEAR HEAD, 8H10XN DECIMAL GEAR 1 / 35 LB-IN, 375 RATIO, 4.8 RPM, 2-15 W, FOR USH SYNCHRONOUS MOTOR
✓ IN STOCK!
£7.06
Price with VAT:
£8.48
NAPA
NAPA 4073
NAPA 4073, COOLANT FILTER / CONDITIONER, 200PSI BURST PRESURE, 30MICRON RATING,THREAD SIZE 11/16-16, HEIGHT 5.214INCH, DIAMETER TOP 3.694INCH
£7.13
Price with VAT:
£8.56
NAPA
25-9500
V-BELT, 9500 SERIES, COGGED AUTOMOTIVE, 50.27" OUTSIDE CIRCUMFERENCE, 0.53" TOP WIDTH, 8.73" BELT DEPTH, AW-17 BELT SECTION
✓ IN STOCK!
£7.23
Price with VAT:
£8.67
NIDEC CORP
JAPAN SERVO CO LTD
CN2B5
DISCONTINUED BY MANUFACTURER, AC AXIAL FAN, SERIES CN, 16/13 W, 200/170 MA, 115 VAC, 50/60 HZ, 120 X 38 MM
✓ IN STOCK!
£7.28
Price with VAT:
£8.74
NIDEC CORP
JAPAN SERVO CO LTD
6H50N-21
GEAR HEAD, 138.89 OZ-IN, 9.8 X 10.4 NM, SINGLE SPEED, 50 RATIO, 28 RPM, FOR REVERSIBLE MOTORS
✓ IN STOCK!
£7.32
Price with VAT:
£8.78
