SEARCH NOW FOR ALL YOUR NIDEC SERVO SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
NIDEC CORP
JAPAN SERVO CO LTD
TUDC12Z4F-022
DISCONTINUED BY MANUFACTURER, DC FAN, BLOWER, BRUSHLESS, TUDC SERIES, 60X25MM,12VDC,0.14AMP,1.8W
✓ IN STOCK!
£6.49
Price with VAT:
£7.79
NIDEC CORP
JAPAN SERVO CO LTD
6H12.5N-21
GEAR HEAD, 41.67 OZ-IN, 2.9 X 10.4 NM, SINGLE SPEED, 12.5 RATIO, 110 RPM, 2.40 X 2.40 INCH, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£6.49
Price with VAT:
£7.79
NIDEC CORP
JAPAN SERVO CO LTD
CNDC24B7R
DC AXIAL FAN / BRUSHLESS, CNDC SERIES, 40 DB, 99 CFM, 2650 MIN/1, 4.8 W, 0.2 AMP, 24 VDC, 2-WIRE TERMINATION, 120 X 120 X 38 MM
✓ IN STOCK!
£8.77
Price with VAT:
£10.52
NIDEC CORP
JAPAN SERVO CO LTD
PUDC24H4C-049
FAN, 2 WIRE, 24 VDC, 0.16 AMP, 3.8 WATT, 80 X 80 X 25 MM
✓ IN STOCK!
£9.00
Price with VAT:
£10.80
NIDEC CORP
JAPAN SERVO CO LTD
D1338B12B7AZ-00
DISCONTINUED BY MANUFACTURER, DC AXIAL FAN, 54 DB, 3900 MIN/1, 16.2 W, 1350 MA, 12 VDC, 5.0 X 1.5 INCH
✓ IN STOCK!
£7.01
Price with VAT:
£8.41
NIDEC CORP
JAPAN SERVO CO LTD
6H15N-21
GEAR HEAD, 37.50 OZ-IN, 2.6 X 10.4 NM, STANDARD SHAFT, 15 RATIO, 120 RPM, 3.0 W, 60 HZ, FOR REVERSIBLE MOTORS
✓ IN STOCK!
£7.03
Price with VAT:
£8.44
NIDEC CORP
JAPAN SERVO CO LTD
6H6N-21
GEAR HEAD, 0.78 LB-IN, 6 RATIO, 300 RPM, 0.5-3 W, 1.65 X 1.65 INCH, FOR UIH SERIES INDUCTION MOTORS
✓ IN STOCK!
£7.03
Price with VAT:
£8.44
NIDEC CORP
JAPAN SERVO CO LTD
8H5N-21
GEAR HEAD, 1.8 LB-IN, 5 RATIO, 360 RPM, 2-15 W, 3.15 X 3.15 INCH, FOR USH SYNCHRONOUS MOTOR
✓ IN STOCK!
£7.03
Price with VAT:
£8.44
NIDEC CORP
JAPAN SERVO CO LTD
KH42HM2B103
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR, CONTINUOUS DUTY, 1.8 DEGREE / FULL STEP, 197 MN-M, 700 PPS, 0.58 AMP, 2 PHASE, 5.57 VDC
✓ IN STOCK!
£7.03
Price with VAT:
£8.44
NIDEC CORP
JAPAN SERVO CO LTD
KH56JM2B043
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR / HYBRID, KH56 SERIES, CONTINUOUS DUTY, 1.8 DEGREE/ STEP, 3500 PPS, 1.4 AMP, 4 PHASE, 2 PHASE EXCITATION, 2.5 VDC
✓ IN STOCK!
£7.15
Price with VAT:
£8.58
NIDEC CORP
JAPAN SERVO CO LTD
CN2B5
DISCONTINUED BY MANUFACTURER, AC AXIAL FAN, SERIES CN, 16/13 W, 200/170 MA, 115 VAC, 50/60 HZ, 120 X 38 MM
✓ IN STOCK!
£7.28
Price with VAT:
£8.74
NIDEC CORP
JAPAN SERVO CO LTD
6H30N
DISCONTINUED BY MANUFACTURER, GEAR HEAD, 30 RATIO, FOR 60 MM SQUARE, INDUCTION, REVERSIBLE
✓ IN STOCK!
£7.57
Price with VAT:
£9.09
NIDEC CORP
JAPAN SERVO CO LTD
6H1800N-21
GEAR HEAD, STANDARD SHAFT, 1800 RATIO, 1 RPM, 2 W, 60 HZ, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£7.57
Price with VAT:
£9.09
NIDEC CORP
JAPAN SERVO CO LTD
8H225N-3
DISCONTINUED BY MANUFACTURER, GEAR HEAD, 225 R/MIN, REDUCTION RATIO 1: 50/60 HZ, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£7.57
Price with VAT:
£9.09
NIDEC CORP
JAPAN SERVO CO LTD
8H6N
DISCONTINUED BY MANUFACTURER, GEAR HEAD, 6 R/MIN, REDUCTION RATIO 1:250 50 HZ, REDUCTION RATIO 1:300 60 HZ, FOR REVERSIBLE MOTORS
✓ IN STOCK!
£7.57
Price with VAT:
£9.09
NIDEC CORP
JAPAN SERVO CO LTD
SCNDM48B4
FAN, 120X120X38MM, 48VDC, 106CFM
✓ IN STOCK!
£7.96
Price with VAT:
£9.55
NIDEC CORP
JAPAN SERVO CO LTD
SCUDM24B4
FAN, SILENT FAN, 24VDC, 0.2A, 4.5W, 12CM
✓ IN STOCK!
£8.10
Price with VAT:
£9.72
NIDEC CORP
JAPAN SERVO CO LTD
6H120N-21
GEAR HEAD, STANDARD SHAFT, 120 RATIO, 15 RPM, 2 W, 60 HZ, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£8.11
Price with VAT:
£9.74
NIDEC CORP
JAPAN SERVO CO LTD
6H90N-21
GEAR HEAD, STANDARD SHAFT, 90 RATIO, 20 RPM, 2 W, 60 HZ, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£8.11
Price with VAT:
£9.74
NIDEC CORP
JAPAN SERVO CO LTD
PUDC24B4RS
DC AXIAL FAN, 33 CFM, 38 PA, 70 MA, 24 VDC, 3.15 X 3.15 INCH
✓ IN STOCK!
£8.11
Price with VAT:
£9.74
NIDEC CORP
JAPAN SERVO CO LTD
D1238T24B6AZ-00
DISCONTINUED BY MANUFACTURER, DC AXIAL FAN, 24 VDC
✓ IN STOCK!
£8.11
Price with VAT:
£9.74
NIDEC CORP
JAPAN SERVO CO LTD
TUDC12D4-929
BOX FAN DC BRUSHLESS 12VDC 0.9W DCTINY 25III
✓ IN STOCK!
£8.38
Price with VAT:
£10.06
NIDEC CORP
JAPAN SERVO CO LTD
KP6AP8-701
STEPPER MOTOR, KP6AP8 SEREIS, 20 OHM, 49 MH, 196 MN-M, 7.5 DEGREE / STEP, 0.6 AMP, 12 VDC
✓ IN STOCK!
£8.41
Price with VAT:
£10.09
NIDEC CORP
JAPAN SERVO CO LTD
SCNDM24Z4
DIRECT VIEW AXIAL SILENT FAN, 24VDC
✓ IN STOCK!
£8.45
Price with VAT:
£10.14
NIDEC CORP
JAPAN SERVO CO LTD
CUJ55B5
FAN, AXIAL, 100VAC, 50/60HZ, 12/11W, 120X25MM, CENTAUR25
✓ IN STOCK!
£11.47
Price with VAT:
£13.76
NIDEC CORP
JAPAN SERVO CO LTD
PUDC24B4
DC AXIAL FAN, 30 DB, 2800 MIN/1, 1.5 W, 70 MA, 24 VDC, 3.2 X 1.0 INCH
✓ IN STOCK!
£8.55
Price with VAT:
£10.26
NIDEC CORP
JAPAN SERVO CO LTD
6H60N-21
GEAR HEAD, 7.0 LB-IN, 60 RATIO, 30 RPM, 0.5-3 W, 1.65 X 1.65 INCH, FOR UIH SERIES INDUCTION MOTORS
✓ IN STOCK!
£8.65
Price with VAT:
£10.38
NIDEC CORP
JAPAN SERVO CO LTD
6H180N-21
GEAR HEAD, 138.89 OZ-IN, 9.8 X 10.4 NM, STANDARD SHAFT, 180 RATIO, 10 RPM, 3.0 W, 60 HZ, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£8.65
Price with VAT:
£10.38
NIDEC CORP
JAPAN SERVO CO LTD
8H90N
DISCONTINUED BY MANUFACTURER, GEAR HEAD, 34 LB-IN, RATIO 90, 20 RPM, 6-15 W, 3.15 X 3.15 INCH, FOR UIH SERIES INDUCTION MOTORS
✓ IN STOCK!
£8.65
Price with VAT:
£10.38
NIDEC CORP
JAPAN SERVO CO LTD
G1238C24B8ZP-C6
DISCONTINUED BY MANUFACTURER, DC FAN / VARIABLE-SPEED, G1238C SERIES, MAX AIRFLOW / M3/MIN, MAX STATIC PRESSURE PA, 24 V, 12012038 MM
✓ IN STOCK!
£8.65
Price with VAT:
£10.38
NIDEC CORP
JAPAN SERVO CO LTD
CNDC12Z4P-X
SERVO FAN, 12VDC, 0.8 AMP, 9.5 WATT, 12 CM, 3 WIRE
✓ IN STOCK!
£8.77
Price with VAT:
£10.52
NIDEC CORP
JAPAN SERVO CO LTD
KH42KM2-951
STEPPER MOTOR / HYBRID, BIPOLAR TYPE, 2.3 OHM, 4 MH, 57 OZ-IN, 403 MN-M, 1.8 DEGREE / STEP, 1.2 AMP, 2 PHASE, 2.76 V, 1.65 X 1.65 INCH
£8.99
Price with VAT:
£10.79
NIDEC CORP
JAPAN SERVO CO LTD
KH56KM2-903J
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR / HYBRID, KH56 SERIES, CONTINUOUS DUTY, 1.8 DEGREE/ STEP, 833.6 MN-M, 800 PPS, 1.0 AMP, 4 PHASE, 2 PHASE EXCITATION, 6.71 VDC
✓ IN STOCK!
£9.19
Price with VAT:
£11.03
NIDEC CORP
JAPAN SERVO CO LTD
6H25N-21
GEAR HEAD, 76.39 OZ-IN, 5.4 X 10.4 NM, SINGLE SPEED, 25 RATIO, 56 RPM, 2.40 X 2.40 INCH, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£9.61
Price with VAT:
£11.53
NIDEC CORP
JAPAN SERVO CO LTD
IH6PF6BG-6
GEAR MOTOR 285RPM 115VAC 1:6 RATIO
£9.64
Price with VAT:
£11.57
NIDEC CORP
JAPAN SERVO CO LTD
6H6FB-1
GEAR HEAD
£9.64
Price with VAT:
£11.57
Repair Yours
Contact Us
NIDEC CORP
JAPAN SERVO CO LTD
8H15N-21
GEAR HEAD, STANDARD SHAFT, 152.78 OZ-IN, 10 X 10.4 NM, 15 RATIO, 15 W, 120 RPM, 60 HZ, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£9.73
Price with VAT:
£11.68
NIDEC CORP
JAPAN SERVO CO LTD
G1238B48BAZQ-20
DISCONTINUED BY MANUFACTURER, FAN / DC, 4700 MIN/1, 0.66 AMP, 3 PHASE, 8 POLE, 48 VDC
✓ IN STOCK!
£10.27
Price with VAT:
£12.33
NIDEC CORP
JAPAN SERVO CO LTD
MADC48K7Q-965
DISCONTINUED BY MANUFACTURER, DC AXIAL FAN, MADC SERIES, DC MAXI III, 1.02 AMP, SINGLE PHASE, 6 PLE, 48 VDC, WITH SENSOR
✓ IN STOCK!
£10.27
Price with VAT:
£12.33
NIDEC CORP
JAPAN SERVO CO LTD
PUDC24Z4
DISCONTINUED BY MANUFACTURER, AXIAL FAN, DC PIXIE 25 III, 7 BLADE, 24VDC, 0.1AMP, 2.4W, OPEN FLANGE, 80X80X25MM, 2 WIRE
✓ IN STOCK!
£10.32
Price with VAT:
£12.38
NIDEC CORP
JAPAN SERVO CO LTD
CNDC24Z7C-042
FAN, AXIAL, 24V, .37A, 9W, 120X38 MM, 2 WIRES
✓ IN STOCK!
£14.00
Price with VAT:
£16.80
NIDEC CORP
JAPAN SERVO CO LTD
6H50N-21
GEAR HEAD, 138.89 OZ-IN, 9.8 X 10.4 NM, SINGLE SPEED, 50 RATIO, 28 RPM, FOR REVERSIBLE MOTORS
✓ IN STOCK!
£10.56
Price with VAT:
£12.67
NIDEC CORP
JAPAN SERVO CO LTD
8H18N-21
GEAR HEAD, 8H10XN DECIMAL GEAR, 6.3 LB-IN, 18 RATIO, 100 RPM, 2-15 W, 3.15 X 3.15 INCH, FOR USH SYNCHRONOUS MOTOR
✓ IN STOCK!
£10.81
Price with VAT:
£12.97
NIDEC CORP
JAPAN SERVO CO LTD
KA60KM2-552
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR / HYBRID, KA60 SERIES, NEMA 23, 1.8 DEGREE / STEP, 1.37 OHM, 4.5 MH, 50 MN-M, 2.2 AMP, 2 PHASE, 3.01 V, 2.36 X 2.36 INCH, 1.5 LBS.
✓ IN STOCK!
£10.81
Price with VAT:
£12.97
NIDEC CORP
JAPAN SERVO CO LTD
KH56JM2U-079
STEPPER MOTOR, 6 PIN CONNECTOR
✓ IN STOCK!
£15.28
Price with VAT:
£18.34
NIDEC CORP
JAPAN SERVO CO LTD
CUDC12D4
BRUSHLESS DC FAN, 12VDC, 0.37AMP, 3 W3ATT
✓ IN STOCK!
£11.70
Price with VAT:
£14.04
NIDEC CORP
JAPAN SERVO CO LTD
CB52B3
AC CENTRIFUGAL BLOWER, 125X126X41MM, 208-230V, CB SERIES
✓ IN STOCK!
£11.81
Price with VAT:
£14.18
NIDEC CORP
JAPAN SERVO CO LTD
E1540H12B7ZP-40
DISCONTINUED BY MANUFACTURER, BLOWER / DC BRUSHLESS, E1540H SERIES, SUPER SILENT, 56 DB, 71 CFM, 1.5 AMP, SINGLE PHASE, 4 POLE, 12 VDC
✓ IN STOCK!
£11.90
Price with VAT:
£14.27
