SEARCH NOW FOR ALL YOUR ORIENTAL MOTOR SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
ORIENTAL MOTOR
5IK90GU-SWT
INDUCTION MOTOR, 90W, 3PHASE, 1600R/MIN, 200-230VAC
✓ IN STOCK!
£107.17
Price with VAT:
£128.60
ORIENTAL MOTOR
VEXTA
CSK268-AT
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR SYSTEM, 2 PHASE, W/ 24VDC, 36VDC INPUT BOARD
✓ IN STOCK!
£472.94
Price with VAT:
£567.53
ORIENTAL MOTOR
CSK299-ATA
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR SYSTEM, 2PH FULL/HALF STEP, 1.8IN STEP ANGLE, ROUND SHAFT NO GEARHEAD, 24/36VDC POWER SUPPLY, 38.8LB-IN MAX TORQUE
✓ IN STOCK!
£241.67
Price with VAT:
£290.01
ORIENTAL MOTOR
FPW540C-30E
DISCONTINUED BY MANUFACTURER, SINCE 4/1/2015, GEARED INDUCTION MOTOR, DUST-PROOF/WATER-PROOF, PFW SERIES, PARALLEL SHAFT GEARHEAD(GEARED), SINGLE-PHASE, 200-230 VAC, 50/60 HZ, 0.34 -0.39 AMP ...
£263.74
Price with VAT:
£316.49
ORIENTAL MOTOR
0GN18KA
GEARHEAD, PARALLEL SHAFT, 18:1 GEAR RATIO, 3/16IN SHAFT DIAMETER
✓ IN STOCK!
£50.30
Price with VAT:
£60.36
ORIENTAL MOTOR
0GN60KA
GEAR HEAD 60:1RATIO PARALLEL SHAFT 3/16IN SHAFT
✓ IN STOCK!
£63.10
Price with VAT:
£75.72
Repair Yours
Contact Us
ORIENTAL MOTOR
2GB12.5KA
GEARHEAD, 12.5:1 RATIO
✓ IN STOCK!
£32.75
Price with VAT:
£39.30
Repair Yours
Contact Us
ORIENTAL MOTOR
2GB36KA
DISCONTINUED BY MANUFACTURER, GEARHEAD, (36:1) RATIO
✓ IN STOCK!
£46.29
Price with VAT:
£55.55
ORIENTAL MOTOR
VEXTA
ASD16D-C
DISCONTINUED BY MANUFACTURER, SERVO DRIVE ,DRIVER ALPHASTEP CLOSED LOOP, 200230 VAC, 1PHASE
✓ IN STOCK!
£343.01
Price with VAT:
£411.61
ORIENTAL MOTOR
VEXTA
ASD20A-S
DISCONTINUED BY MANUFACTURER, DRIVE STEPPER, 2.4 AMP, 200-230 VAC, 50/60 HZ
✓ IN STOCK!
£542.66
Price with VAT:
£651.19
ORIENTAL MOTOR
VEXTA
ASD30A-A
DISCONTINUED BY MANUFACTURER, STEP MOTOR DRIVE, SINGLE PHASE, 110/115 VAC, 50/60 HZ
✓ IN STOCK!
£907.75
Price with VAT:
£1,089.30
ORIENTAL MOTOR
VEXTA
ASD36B-K
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR, 3.7AMP, 24VDC
✓ IN STOCK!
£618.76
Price with VAT:
£742.51
ORIENTAL MOTOR
VEXTA
BXD30A-C
DISCONTINUED BY MANUFACTURER, BRUSHLESS DC SPEED CONTROLLER, 200-230 VAC, 50/60 HZ, 0.8 AMP
✓ IN STOCK!
£287.56
Price with VAT:
£345.07
ORIENTAL MOTOR
BXM5120-A2
DISCONTINUED BY MANUFACTURER, BRUSHLESS DC MOTOR, SPEED CONTROL RANGE: 2 ~ 4000 R/MIN (DIGITAL SETTING)
✓ IN STOCK!
£223.44
Price with VAT:
£268.13
ORIENTAL MOTOR
ESMC-C2
DISCONTINUED BY MANUFACTURER, CONTROLLER, LINEAR MOTION, SINGLE PHASE, EZ LIMO SERIES, 200-230 V, 50/60 HZ, 85% OR LESS AMBIENT HUMIDITY, ROHS COMPLIANT
✓ IN STOCK!
£228.00
Price with VAT:
£273.60
ORIENTAL MOTOR
ESMC-K2
DISCONTINUED BY MANUFACTURER, MOTION CONTROLLER, EZ II SERIES, LINEAR, 24 VDC SUPPLY, CLASS III PROTECTION, IP10 ENCLOSURE PROTECTION
✓ IN STOCK!
£431.21
Price with VAT:
£517.45
ORIENTAL MOTOR
EZSM3D030A
DISCONTINUED BY MANUFACTURER, MOTORIZED LINEAR SLIDE, BALL SCREW DRIVE METHOD, 11.81 INCH STROKE
✓ IN STOCK!
£630.32
Price with VAT:
£756.38
ORIENTAL MOTOR
FSP200-3
DISCONTINUED BY MANUFACTURER, MOTOR SPEED CONTROL, 3-PHASE, 200-230 V AC, 50/60 HZ, 1.75 A
✓ IN STOCK!
£219.90
Price with VAT:
£263.88
ORIENTAL MOTOR
VEXTA
GFH5G20
DISCONTINUED BY MANUFACTURER, REDUCTION DRIVE GEARBOX, SPEED REDUCER, GEAR HEAD PARALLEL SHAFT, 20:1 RATIO
✓ IN STOCK!
£221.26
Price with VAT:
£265.51
ORIENTAL MOTOR
GFS2G5
GEARHEAD, PARALLEL SHAFT, 5:1 RATIO, 10MM SHAFT, 2.36 INCH FRAME
✓ IN STOCK!
£84.91
Price with VAT:
£101.89
Repair Yours
Contact Us
ORIENTAL MOTOR
PAVR-20KZ
POTENTIOMETER SPEED CONTROL, EXTERNAL 20K
✓ IN STOCK!
£10.21
Price with VAT:
£12.25
ORIENTAL MOTOR
PK223PA-SG7.2
DISCONTINUED BY MANUFACTURER, STEPPING MOTOR, 2 PHASE, 0.95A, 2.8 OHMS
✓ IN STOCK!
£122.40
Price with VAT:
£146.88
ORIENTAL MOTOR
VEXTA
PK268M-E2.0A
DISCONTINUED BY MANUFACTURER,STEPPER MOTO, 2 PHASE,0.9/STEP,DC,2AMP,2.25OHM,PANEL MOUNT
✓ IN STOCK!
£86.15
Price with VAT:
£103.38
ORIENTAL MOTOR
SOL5UA
BRACKET, MOTOR AND GEARHEAD MOUNTING BRACKET, FOR 3.54 INCH FRAME SIZE
✓ IN STOCK!
£29.70
Price with VAT:
£35.64
ORIENTAL MOTOR
MD825B-12
DC AXIAL FLOW FAN, ORIX, 12 V DC, 0.25 AMP, 3.15 INCHES (80 MM), 3800 R/MIN
✓ IN STOCK!
£16.77
Price with VAT:
£20.12
ORIENTAL MOTOR
ORIX
MRS16-DUL
FAN, 200/230VAC, 50/60HZ, 6.30IN, SINGLE PHASE, 0.25AMP, 51WATT INPUT, CONNECTION TYPE - TERMINAL BOX
✓ IN STOCK!
£82.41
Price with VAT:
£98.89
ORIENTAL MOTOR
PK513PA
5-PHASE STEP MOTOR, HIGH-TORQUE, 0.35A CURRENT, ROUND SHAFT, NO GEAR HEAD, 5 LEAD WIRES
✓ IN STOCK!
£101.50
Price with VAT:
£121.80
Repair Yours
Contact Us
ORIENTAL MOTOR
2GB9KA
DISCONTINUED BY MANUFACTURER, GEARHEAD, SPEED REDUCTION, (9:1) RATIO
✓ IN STOCK!
£23.15
Price with VAT:
£27.78
ORIENTAL MOTOR
2GN120KA
GN GEARHEAD, PARALLEL SHAFT, 120:1 GEAR RATIO, 2.36 INCH FRAME, 5/16 INCH OUTPUT SHAFT DIAMETER, BOX TYPE GEARHEAD
✓ IN STOCK!
£27.20
Price with VAT:
£32.63
ORIENTAL MOTOR
5GE60SA
GEARHEAD, PARALLEL SHAFT, (60:1), 4 BOLT MOUNT
✓ IN STOCK!
£95.56
Price with VAT:
£114.67
Repair Yours
Contact Us
ORIENTAL MOTOR
5GN100S
GN GEARHEAD PARALLEL SHAFT (100:1)
✓ IN STOCK!
£91.03
Price with VAT:
£109.24
ORIENTAL MOTOR
VEXTA
5GN10XK
DECIMAL GEARHEAD, PARALLEL SHAFT, GN-K GEARHEAD, GEAR RATIO: 10, 90MM FRAME SIZE
✓ IN STOCK!
£51.40
Price with VAT:
£61.68
ORIENTAL MOTOR
5GN15RH
GEAR HEAD, GN SERIES, RIGHT ANGLE, HOLLOW SHAFT, 15:1 RATIO, FLANGE MOUNTED, FRAME SIZE 5
✓ IN STOCK!
£65.63
Price with VAT:
£78.76
Repair Yours
Contact Us
ORIENTAL MOTOR
5GN36K
GEAR HEAD, PARALLEL SHAFT, 36:1 RATIO, SOLID SHAFT, 3.54 INCH FRAME SIZE, 12 MM OUTPUT SHAFT DIAMETER, ROHS COMPLIANT
✓ IN STOCK!
£53.24
Price with VAT:
£63.89
ORIENTAL MOTOR
5GU120RH
GU GEARHEAD, RIGHT-ANGLE, HOLLOW SHAFT, 120:1 RATIO, 17 MM OUTPUT SHAFT DIAMETER
✓ IN STOCK!
£95.49
Price with VAT:
£114.58
ORIENTAL MOTOR
VEXTA
5GU15KB
GEAR HEAD, PARALLEL SHAFT, 15:1 RATIO
✓ IN STOCK!
£47.00
Price with VAT:
£56.40
ORIENTAL MOTOR
5GU7.5KB
GEARHEAD PARALLEL SHAFT, 75:1 RATIO, 3.54 IN FRAME SIZE, 15 MM OUTPUT SHAFT DIAMETER
✓ IN STOCK!
£51.96
Price with VAT:
£62.35
ORIENTAL MOTOR
VEXTA
AXHM230KC-A
DISCONTINUED BY MANUFACTURER, DC MOTOR, BRUSHLESS, 2500 RPM, 30W (1/25HP), ROUND SHAFT, FRAME SIZE: 2.36 IN. SQ., IP54
✓ IN STOCK!
£232.01
Price with VAT:
£278.42
ORIENTAL MOTOR
BLHD50K
DISCONTINUED BY MANUFACTURER, BRUSHLESS DC MOTOR DRIVER, 24 VDC SUPPLY POWER, 50 WATT (1/15 HP) OUTPUT POWER, COMPACT BOARD-TYPE, ROHS COMPLIANT, NO REPLACEMENT
✓ IN STOCK!
£326.62
Price with VAT:
£391.94
ORIENTAL MOTOR
CH40BFAUL-C
CAPACITOR, FOR AC MOTORS, 4.0 UF, 10000AFC, 50/60 HZ, 25/85/21
✓ IN STOCK!
£8.88
Price with VAT:
£10.66
ORIENTAL MOTOR
4IK25GN-SWT
DISCONTINUED BY MANUFACTURER, INDUCTION MOTOR
✓ IN STOCK!
£555.56
Price with VAT:
£666.67
ORIENTAL MOTOR
4TK10A-AULA
DISCONTINUED BY MANUFACTURER, TORQUE MOTOR, 1 PH, 115 V, 60 HZ, 2.8 W, 900 RPM
✓ IN STOCK!
£78.79
Price with VAT:
£94.55
Repair Yours
Contact Us
ORIENTAL MOTOR
5GE18RA
GE GEARHEAD RIGHT-ANGLE SOLID SHAFT (18:1)
✓ IN STOCK!
£89.15
Price with VAT:
£106.98
ORIENTAL MOTOR
CC01EMP1T
DISCONTINUED BY MANUFACTURER ,I/O CABLE WITH TERMINAL BLOCK
✓ IN STOCK!
£110.76
Price with VAT:
£132.92
