SEARCH NOW FOR ALL YOUR PARKER SOLUTIONS
Find valves / solenoids, power supplies, servo drives and more.
Machine Parts / Seal
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
PARKER
PK1002AN01
DISCONTINUED BY MANUFACTURER, SEAL KIT, PISTON, 1IN BORE, RSK, TYPE 2AN
✓ IN STOCK!
£44.03
Price with VAT:
£52.84
PARKER
VM100-75
DISCONTINUED BY MANUFACTURER, SEAL - O-RINGS, (75 VITON), FLUOROCARBON 75 DUROMETER O-RING, LOW COMPRESSION, HIGH TEMPERATURE (260F-400F) F, O-RINGS ARE COMPATIBLE WITH OILS AND GASES, HYDRA ...
✓ IN STOCK!
£22.62
Price with VAT:
£27.14
PARKER
JM CLIPPER
19731-SS
OIL SEAL, SPRINGLESS, 82 X 92 X 5MM
✓ IN STOCK!
£8.90
Price with VAT:
£10.68
PARKER
HANNIFIN
RG2AHL131
DISCONTINUED BY MANUFACTURER, GLAND CARTRIDGE SERVICE KIT
✓ IN STOCK!
£183.25
Price with VAT:
£219.90
PARKER
RPH-PK602HLL01
PISTON SEAL KIT, 6" BORE, MATERIAL: NBR, TYPE: 3L, PRIMARY SEAL MATERIAL: BUNA-N (NITRILE), SEAL CLASS: CLASS 1, SERIES: 2HL 3LL VHL
✓ IN STOCK!
£88.42
Price with VAT:
£106.11
PARKER
MILLER FLUID POWER
008-RG006-75
DISCONTINUED BY MANUFACTURER, SEAL RING, 3/4, 7/8, 1/16
✓ IN STOCK!
£2.45
Price with VAT:
£2.94
PARKER
CYLINDER DIVISION
PK402HLF05
DISCONTINUED BY MANUFACTURER, PISTON SEAL KIT, 4", LO-FRI
✓ IN STOCK!
£61.41
Price with VAT:
£73.69
PARKER
9082 414
DISCONTINUED BY MANUFACTURER, ROTARY SHAFT DEFLECTOR SEAL, 5.438IN BORE, 4.438 SHAFT DIA, 0.250IN WIDTH, NBR POLYMER, 250F MAX TEMP
✓ IN STOCK!
£38.16
Price with VAT:
£45.79
PARKER
12020 H1L5
OIL SEAL, 1.375 IN SHAFT DIA, 3.15 IN BORE DIA, 0.313 IN SEAL WIDTH, LUP SEAL TYPE
✓ IN STOCK!
£9.74
Price with VAT:
£11.69
PARKER
9857 H1L5
ROTARY LIP SEAL, SEAL TYPE: RUP, MATERIAL: NBR, SHAFT DIAMETER: 8.750, BORE DIAMETER: 10.000, SEAL WIDTH: .625, MANUFACTURER UPC NUMBER: 827834167842
✓ IN STOCK!
£76.79
Price with VAT:
£92.15
PARKER
ATLAS CYLINDERS
PH00LH025
PISTON SEAL KIT, 2-1/2" BORE, NITRILE
✓ IN STOCK!
£16.13
Price with VAT:
£19.36
PARKER
3QTR07
DISCONTINUED BY MANUFACTURER, CLIPPER OIL SEAL, 2-1/2 X 1-5/16 X 3/8 INCH
✓ IN STOCK!
£20.28
Price with VAT:
£24.33
PARKER
JM CLIPPER
0250 09790
DISCONTINUED BY MANUFACTURER, OIL SEAL, ROUND, 9790-LUP-2, 3.25IN OD, 2.5IN BORE
✓ IN STOCK!
£30.15
Price with VAT:
£36.18
PARKER
HYDRAULIC VALVE DIVISION
N0674 2-111-EACH
(PRICE/EACH) O-RING, NITRILE RUBBER, 70 DUROMETER, GENERAL PURPOSE, .424" INSIDE DIAMETER, STANDARD THERMAL APPLICATION (-30 / 250 DEGRESS FAHRENHEIT, FOR OILS, GENERAL INDUSTRY, BLACK
✓ IN STOCK!
£0.20
Price with VAT:
£0.24
PARKER
PK502HLLU1
DISCONTINUED BY MANUFACTURER, PISTON SEAL KIT, 5" BORE
✓ IN STOCK!
£12.76
Price with VAT:
£15.32
PARKER
17063-H-1
DISCONTINUED BY MANUFACTURER, OIL SEAL, CLIPPER OIL SEAL, LUP SEAL TYPE, MATERIAL: NBR, BORE DIAMETER 5 INCHES
✓ IN STOCK!
£14.24
Price with VAT:
£17.08
PARKER
MILLER FLUID POWER
090-KB004-250
PISTON SEAL KIT, 2-1/2-INCH BORE, NITRILE / TEFLON, SERIES A,
✓ IN STOCK!
£53.77
Price with VAT:
£64.53
PARKER
JM CLIPPER
0168-10250
DISCONTINUED BY MANUFACTURER, OIL SEAL
✓ IN STOCK!
£4.14
Price with VAT:
£4.97
PARKER
426325001500-375
1-1/2" ID X 2" OD, 3/8" THICK, POLYPAK SEAL
✓ IN STOCK!
£62.57
Price with VAT:
£75.08
PARKER
9639 H1L5
DISCONTINUED BY MANUFACTURER, ROTARY LIP SEAL, 33MM SHAFT, 46MM BORE DIA, 6MM WIDTH, LUP TYPE, NBR LIP
✓ IN STOCK!
£30.56
Price with VAT:
£36.67
PARKER
134-024P
DISCONTINUED BY MANUFACTURER, SEAL, ORING, RUBBER MATERIAL, BLACK, PACK OF 3
✓ IN STOCK!
£5.90
Price with VAT:
£7.08
PARKER
HANNIFIN
6336 H1L5
OIL SEAL, ROTARY SHAFT, SINGLE LIP, 2-1/4" SHAFT DIA, 3-1/4" HOUSING BORE, 3/8" NOMINAL WIDTH
✓ IN STOCK!
£25.95
Price with VAT:
£31.14
PARKER
JM CLIPPER
0712-16413
OIL SEAL, 8.625 INCH OUTER DIAMETER, 0.625 INCH SEAL WIDTH, KEVLAR REINFORCED HEEL, THIS SEAL CAN BE USED AS A SOLID OR A SPLIT SEAL., NITRILE / VITON MATERIAL
✓ IN STOCK!
£153.00
Price with VAT:
£183.60
PARKER
S1138
O-RING, 70-DUROMETER, SILICONE, SIZE 002, INSIDE DIAMETER 0.042 INCHES, CROSS SECTION 0.050 INCHES
✓ IN STOCK!
£0.54
Price with VAT:
£0.65
PARKER
16467H1L5
DISCONTINUED BY MANUFACTURER, CLIPPER OIL SEAL, GENERAL PURPOSE DOUBLE LIP FEATURE, NBR SOLID, 1.68 INCH SHAFT X 2.63 INCH BORE X 05 INCH SEAL, PRIMARY SPRING-LOADED LIP
✓ IN STOCK!
£11.11
Price with VAT:
£13.33
PARKER
MILLER FLUID POWER
052-PS003-250
DISCONTINUED BY MANUFACTURER, CUP SEALS, LEATHER, 2-1/2 INCH BORE, TWO-PACK
✓ IN STOCK!
£13.95
Price with VAT:
£16.74
PARKER
JM CLIPPER
0625-04548
DISCONTINUED BY MANUFACTURER, GENERAL PURPOSE SPRING-LOADED SINGLE LIP SEAL, FEATURES NONMETALLIC COMPOSITE OD FOR DAMAGE-FREE INSTALLTION, DESIGN RUP, MATERIAL NITRILE/ VITON
✓ IN STOCK!
£8.34
Price with VAT:
£10.00
PARKER
9963 H1L5
GENERAL PURPOSE SPRING-LOADED SINGLE LIP SEAL, W/ NONMETALLIC COMPOSITE OD DAMAGE-FREE INSTALLATION, 4.750" SHAFT, 5.750" BORE, 0.562" SEAL LENGHT
✓ IN STOCK!
£19.85
Price with VAT:
£23.82
PARKER
4BVH-SS
DISCONTINUED BY MANUFACTURER, GASKET FACE SEAL, DESIGNED FOR ULTRA-HIGH PURITY GAS DISTRIBUTION SYSTEMS
✓ IN STOCK!
£3.13
Price with VAT:
£3.75
PARKER
MILLER FLUID POWER
091-KB001-325
PISTON SEAL KIT, J SERIES, 3 1/4 IN BORE, NITRILE/TEFLON, 2 TEFLON U-SEALS, 1 WEAR RING, 2 TEFLON TUBE END SEALS
✓ IN STOCK!
£84.17
Price with VAT:
£101.00
PARKER
MILLER FLUID POWER
052-AG101-400
ANTI-ROLL RING, 4 INCH, PISTON, STEEL
✓ IN STOCK!
£25.39
Price with VAT:
£30.47
PARKER
JM CLIPPER
19335 H1L5
OIL SEAL, LIP MATERIAL NBR, SOLID, NONMETALLIC COMPOSITE OD
✓ IN STOCK!
£49.54
Price with VAT:
£59.44
PARKER
JM CLIPPER
9398-LUP-1
OIL SEAL, 2.188 INCH SHAFT, 3.250 INCH BORE, 0.438 INCH LENGTH, SPRING LOADED, GENERAL PURPOSE, SOLID, NITRILE
✓ IN STOCK!
£11.24
Price with VAT:
£13.48
PARKER
S1138 AS568-013
DISCONTINUED BY MANUFACTURER, O-RING, SILICONE, 7/16 X 9/16 X 1/6 INCH (PRICE PER 50 PACK)
✓ IN STOCK!
£8.33
Price with VAT:
£9.99
PARKER
2-281-UHP
DISCONTINUED BY MANUFACTURER, FLUOROELASTOMER SEAL, O RING
✓ IN STOCK!
£25.34
Price with VAT:
£30.41
PARKER
ATLAS CYLINDERS
5B00S040S
SEAL KIT, FOR PISTON LIP, 4.000", NBR, TYPE A
✓ IN STOCK!
£141.31
Price with VAT:
£169.57
PARKER
ATLAS CYLINDERS
BH10SL000
SEAL KIT, AL ROD, 1.00 BUNA
✓ IN STOCK!
£102.22
Price with VAT:
£122.67
PARKER
41150000TR052
DISCONTINUED BY MANUFACTURER, ROD T SEAL
✓ IN STOCK!
£12.67
Price with VAT:
£15.21
PARKER
2-030 N674-70
DISCONTINUED BY MANUFACTURER, O-RING, 1-5/8" I.D., 1-3/4" O.D., 1/16"W
✓ IN STOCK!
£3.64
Price with VAT:
£4.37
PARKER
JM CLIPPER
16677-H1L7
DISCONTINUED BY MANUFACTURER, OIL SEAL, SPRING-LESS
✓ IN STOCK!
£5.34
Price with VAT:
£6.41
PARKER
PROTECH BEARING ISOLATOR
FSM-0360-0550-1-1
DISCONTINUED BY MANUFACTURER, BEARING ISOLATOR, 36 MM ID, 55 MM OD, FLANGED, 8 MM BORE DEPTH, 5 PSI MAX, 15 M/S MAX, -40 TO 121°C OPERATING TEMP., PTFE SEALS, FKM O-RING
✓ IN STOCK!
£41.49
Price with VAT:
£49.78
PARKER
PROTECH BEARING ISOLATOR
FSM-0360-0650-1-1
DISCONTINUED BY MANUFACTURER, BEARING ISOLATOR, 36 MM ID, 65 MM OD, FLANGED, 5 PSI MAX, 15 M/S MAX, -40-121 C OPERATING TEMP, PTFE SEALS, FKM O-RING
✓ IN STOCK!
£41.49
Price with VAT:
£49.78
PARKER
JM CLIPPER
11014 H1L5
CLIPPER OIL SEAL, GENERAL PURPOSE, SINGLE LIP ROTARY SHAFT, 3.250 INCH BORE DIAMETER, NITRILE BUTADIENE RUBBER
✓ IN STOCK!
£46.10
Price with VAT:
£55.32
