SEARCH NOW FOR ALL YOUR PLA SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
PLASTIBOND
PLASTI-BOND
PRST3
KNOCKOUT HUB, 1 INCH, 40 MIL GRAY PVC EXTERIOR COATING, 2 MIL RED URETHANE INTERIOR COATING, W / O-RING GASKET SEAL
✓ IN STOCK!
£69.93
Price with VAT:
£83.91
PLASTIC CAPACITORS
OF-20-254
CAPACITOR FILTER .25MFD 2000VDC PLASTIC FILM
✓ IN STOCK!
£85.64
Price with VAT:
£102.77
PLASTIC CAPACITORS
LK150-104
DISCONTINUED BY MANUFACTURER, CAPACITOR, MFD: .1, VOLT: KDCW: 15, WIDTH: 3-3/4, DIAMETER: 1-3/4, HEIGHT: 3-3/4
✓ IN STOCK!
£58.03
Price with VAT:
£69.63
PLASTIC CAPACITORS
LK20-105
CAPACITOR, 2000VDC, 1MFD, POLYESTER W/ METAL CASE, 10% TOLERANCE, INSULATION RESISTANCE 40-80KOHM
✓ IN STOCK!
£41.91
Price with VAT:
£50.29
PLASTIC CAPACITORS
OF90-204A
CAPACITOR, .2MFD, 9000VDC, W/PLASTIC FILM
✓ IN STOCK!
£9.81
Price with VAT:
£11.77
PLASTIC CAPACITORS
LK150-504
DISCONTINUED BY MANUFACTURER, CAPACITOR--.5U, 5000VDC
✓ IN STOCK!
£84.14
Price with VAT:
£100.97
PLASTIC CAPACITORS
LQ20-254V
CAPACITOR, 254VAC, 25MFD, 2000VDCW
✓ IN STOCK!
£163.84
Price with VAT:
£196.61
PLASTIC PROCESS EQUIPMENT
IMPD15-B04
TEMPERATURE CONTROLLER, 70-999 DEGREES F RANGE, 208-240 VAC INPUT, 1 PHASE, 50/60 HZ, 15 AMP, 3600 WATT
£113.09
Price with VAT:
£135.71
PLASTIC PROCESS EQUIPMENT
WTC-272
PLASTIC PROCESS EQUIPMENT, WTC-272, SURFACE THERMOCOUPLE, 72IN LEADS TYPE-J,
✓ IN STOCK!
£12.05
Price with VAT:
£14.46
PLASTIC PROCESS EQUIPMENT
ADTP-10120
DISCONTINUED BY MANUFACTURER, THERMOCOUPLE W/ POLARIZED MALE PLUG, 120IN LEADS
✓ IN STOCK!
£4.68
Price with VAT:
£5.62
PLASTIC PROCESS EQUIPMENT
HB3121121400P
BAND HEATER, 3-1/2IN, 400W, 120V
✓ IN STOCK!
£4.46
Price with VAT:
£5.36
PLASTIC PROCESS EQUIPMENT
RTEG334138
NOZZLE TIP STEEL EXT 1/2IN RADIUS 3/8IN ORIFICE
✓ IN STOCK!
£13.39
Price with VAT:
£16.07
PLASTIC PROCESS EQUIPMENT
RTEG3341316
NOZZLE TIP STEEL EXT 1/2IN RADIUS 3/16IN ORIFICE
✓ IN STOCK!
£19.53
Price with VAT:
£23.44
PLASTIC PROCESS EQUIPMENT
T-222
LIMIT SWITCH, MAX VOLTAGE:250V 28VDC,MAX TEMP 175 DEGREE,MAX LOAD 5A RESISTIVE,4A INDUCTIVE, USE ONLY IN DRY LOCATION
✓ IN STOCK!
£88.04
Price with VAT:
£105.65
PLASTIC PROCESS EQUIPMENT
ADT-1048LR
DISCONTINUED BY MANUFACTURER, THERMOCOUPLE, ADJUSTABLE DEPTH, 48IN W/SPADE LUGS
✓ IN STOCK!
£15.33
Price with VAT:
£18.39
PLASTIC PROCESS EQUIPMENT
BP-618120
BENDABLE PROBE THERMOCOUPLE, TYPE J, 1/8" PROBE DIA, 6" PROBE LENGTH, 120" ARMORED LEAD LENGTH
£27.63
Price with VAT:
£33.16
PLASTIC PROCESS EQUIPMENT
BP-121872
BENDABLE PROBE THERMOCOUPLE, TYPE J, 1/8'' PROBE DIA, 12'' PROBE LENGTH, 72'' ARMORED LEAD LENGTH,
✓ IN STOCK!
£22.72
Price with VAT:
£27.26
PLASTIC PROCESS EQUIPMENT
WTC-2120
WASHER TYPE SURFACE THERMOCOUPLE, TYPE J, 120'' LEAD LENGTH, 5/16'' STUD, .328 HOLE
✓ IN STOCK!
£15.47
Price with VAT:
£18.57
PLASTIC PROCESS EQUIPMENT
1890-48
NEWBURY NOZZLE THERMOCOUPLE, 48'' LENGTH OVERALL, 1/8'' PROBE DIA, 1'' LONG X 90 DEGREE BEND W / SPRING STRAIN RELIEF, 24 GA FIBERGLASS LEADS W / SS OVERBRAID
✓ IN STOCK!
£11.05
Price with VAT:
£13.26
PLASTIC PROCESS EQUIPMENT
BP-1218
BENDABLE PROBE THERMOCOUPLE, TYPE J, 1/8" PROBE DIA, 12" PROBE LENGTH, 48'' ARMORED LEAD LENGTH,
✓ IN STOCK!
£19.34
Price with VAT:
£23.21
PLASTIC PROCESS EQUIPMENT
ADTM-144
THERMOCOUPLE, METRIC ADJUSTABLA DEPTH, TYPE J, 4 METER LEAD LENGTH, FITS ALL TC HOLES 1/2'' TO 10'' DEEP
✓ IN STOCK!
£39.30
Price with VAT:
£47.15
PLASTIC PROCESS EQUIPMENT
M-33287-9
DISCONTINUED BY MANUFACTURER, HEATER BAND CLAMP, 230 VAC, 325 WATTS, 4.5 INCH INNER DIAMETER
✓ IN STOCK!
£9.95
Price with VAT:
£11.93
PLASTIC PROCESS EQUIPMENT
VF8D40G
MECHANICAL FLOW METER, WITH PRESSURE GAUGE AND THERMOMETER, 5-40 GPM, 1 INCH NPT, 150 PSI MAX
✓ IN STOCK!
£111.13
Price with VAT:
£133.36
PLASTIC PROCESS EQUIPMENT
200100
DISCONTINUED BY MANUFACTURER, AIR EXHAUST FILTER, PLEATED MEDIA, WOVEN WIRE, VINYL RUBBER ENDS, DIMENSIONS: 7-3/4" OUTER DIAMETER, 4-7/8" INNER DIAMETER, 4-3/8" HIGH
✓ IN STOCK!
£14.09
Price with VAT:
£16.91
PLASTIC PROCESS EQUIPMENT
16121
AIR HOSE, NYLON, RECOIL, 360 DEGREE SWIVEL, 3/8 IN INNER DIAMETER, 50 FT LENGTH, 3/8 IN NPT, RED
✓ IN STOCK!
£6.00
Price with VAT:
£7.19
PLASTIC PROCESS EQUIPMENT
8072
DISCONTINUED BY MANUFACTURER, DEW POINT MONITOR, LED, 3DIGIT, 2PIN CONNECTOR, PORTABLE
✓ IN STOCK!
£604.75
Price with VAT:
£725.69
PLASTIC PROCESS EQUIPMENT
VF8D20G
FLOWMETER, WITH PREASSURE GAUGE & THERMOMETER, 4-20 GMP, MAX PRESSURE:150 PSI, MAX TEMP: 240 DEGREES F, 1 INCH NPT HOLE ON BOTH ENDS
✓ IN STOCK!
£78.75
Price with VAT:
£94.50
PLASTIC PROCESS EQUIPMENT
P3100-20600
DISCONTINUED BY MANUFACTURER, CARTRIDGE HEATER, 240V, 600W, 3/8 X 10
✓ IN STOCK!
£27.80
Price with VAT:
£33.36
PLASTIC PROCESS EQUIPMENT
P3060-20500
DISCONTINUED BY MANUFACTURER, CARTRIDGE HEATER, 240V, 500W, 3/8 X 6,2 WIRE LEADS
✓ IN STOCK!
£15.99
Price with VAT:
£19.19
PLASTIC PROCESS EQUIPMENT
MFFMP2
DISCONTINUED BY MANUFACTURER, MAINFRAME, DUAL ZONE, 208-240VAC, 50AMPS, 21KVA, 50/60HZ
✓ IN STOCK!
£172.44
Price with VAT:
£206.93
PLASTIC PROCESS EQUIPMENT
MPRM-2CM
MAINFRAME, 2 ZONE, 240 VAC, 1 PHASE, 50/60HZ
✓ IN STOCK!
£148.82
Price with VAT:
£178.58
PLASTIC PROCESS EQUIPMENT
WTC-160
SURFACE THERMOCOUPLE WASHER TYPE
✓ IN STOCK!
£8.42
Price with VAT:
£10.11
PLASTIC PROCESS EQUIPMENT
CBHL1
HOPPER LOADER CONTROL BOX, FOR HL-1 VACUUM HOPPER LOADER
✓ IN STOCK!
£163.05
Price with VAT:
£195.66
PLASTIC PROCESS EQUIPMENT
RTEG434114
NOZZLE TIP STEEL EXT 1/2IN RADIUS 1/4IN ORIFICE
✓ IN STOCK!
£16.81
Price with VAT:
£20.17
PLASTIC PROCESS EQUIPMENT
M-11513-3A
BAND HEATER 180W 230V
✓ IN STOCK!
£13.64
Price with VAT:
£16.37
PLASTIC PROCESS EQUIPMENT
ADT-1072
DISCONTINUED BY MANUFACTURER, HVAC CONTROL SENSOR ASSEMBLY
✓ IN STOCK!
£51.03
Price with VAT:
£61.23
PLASTIC PROCESS EQUIPMENT
ADTA-2048
THERMOCOUPLE TYPE J GROUNDED 48IN LEAD
✓ IN STOCK!
£7.19
Price with VAT:
£8.63
PLASTIC PROCESS EQUIPMENT
HMTC-F
THERMOCOUPLE TYPE J STYLE F HOT MELT NOZZLE
✓ IN STOCK!
£9.85
Price with VAT:
£11.82
PLASTIC PROCESS EQUIPMENT
NTC-348
THERMOCOUPLE, SHALLOW NOZZLE, 1/4-28 NF
✓ IN STOCK!
£9.06
Price with VAT:
£10.87
PLASTIC PROCESS EQUIPMENT
NTC-372
THERMOCOUPLE, TYPE J, GROUNDED, 72IN LEAD, 1/4-28 NF
✓ IN STOCK!
£18.31
Price with VAT:
£21.97
PLASTIC PROCESS EQUIPMENT
WTC-260
DISCONTINUED BY MANUFACTURER, SURFACE THERMOCOUPLE, WASHER TYPE
✓ IN STOCK!
£4.82
Price with VAT:
£5.79
PLASTIC PROCESS EQUIPMENT
TALBX612FX
CONTROL BOX FOR TAL-FX HOPPER LOADER, VACUUM LOADER, VOLTAGE: 115 VOLT, FREQUENCY: 60 HZ
✓ IN STOCK!
£64.20
Price with VAT:
£77.04
Repair Yours
Contact Us
PLASTIC PROCESS EQUIPMENT
P3080-20600
DISCONTINUED BY MANUFACTURER, CARTRIDGE HEATER, 240V, 600W, 3/8 X 8, 2 WIRE LEADS
✓ IN STOCK!
£23.16
Price with VAT:
£27.80
PLASTIC PROCESS EQUIPMENT
HR37100EU
DISCONTINUED BY MANUFACTURER, CARTRIDGE HEATER, 24VOLT, 600WATT, 2 WIRE LEADS
✓ IN STOCK!
£23.16
Price with VAT:
£27.80
PLASTIC PROCESS EQUIPMENT
STC-272
DISCONTINUED BY MANUFACTURER, THERMOCOUPLE
✓ IN STOCK!
£22.32
Price with VAT:
£26.78
PLASTIC PROCESS EQUIPMENT
1890-72
NEWBURY NOZZLE THERMOCOUPLE, 72'' LENGTH, 1/8 '' PROBE DIA, 1'' X 90 DEGREE BEND, W / SPRING STRAIN RELIEF
✓ IN STOCK!
£15.35
Price with VAT:
£18.42
PLASTIC PROCESS EQUIPMENT
FP700010
DISCONTINUED BY MANUFACTURER, BALL VALVE, FORGED BRASS, FULL PORT, 1 INCH NPT, FEMALE X FEMALE, OIL/GAS/WATER, LEVER ACTUATION, PTFE SEALS
✓ IN STOCK!
£5.04
Price with VAT:
£6.05
PLASTIC PROCESS EQUIPMENT
RMB30
HOT RUNNER CONTROL, RMB SERIES, 30 AMP, 50/60 HZ, AUTO-TUNING, ADJUSTABLE PROPORTIONAL BAND / RATE
✓ IN STOCK!
£621.26
Price with VAT:
£745.51
