SEARCH NOW FOR ALL YOUR PMC SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
PMC
PT-100-V-HC-HT
DISCONTINUED BY MANUFACTURER, PRESSURE TRANSMITTER, HASTEALLOY-C, DIAPHRAGM
£36.31
Price with VAT:
£43.58
Repair Yours
Contact Us
DANAHER MOTION
PACIFIC SCIENTIFIC MOTION CTRL
STF5332-3748-61-56BC
PMDC MOTOR / WASHDOWN, 1.0 HP, 1750 RPM, 180 V, FGS2389 FGS2389 LG-I-S-19 STK
✓ IN STOCK!
£1,346.42
Price with VAT:
£1,615.70
DANAHER MOTION
PACIFIC SCIENTIFIC MOTION CTRL
SC724A-001
DISCONTINUED BY MANUFACTURER, SERVO CONTROLLER, ANALOG TORQUE/VELOCITY, 230 VAC, 3 PHASE, 50/60 HZ, 15/30 AMP
✓ IN STOCK!
£507.66
Price with VAT:
£609.19
DANAHER MOTION
PACIFIC SCIENTIFIC MOTION CTRL
S33HNNA-RNNM-00
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, BRUSHLESS, 6.9 AMP, 2.1 OHM, 5.1 NM
✓ IN STOCK!
£2,224.17
Price with VAT:
£2,669.00
DANAHER MOTION
PACIFIC SCIENTIFIC MOTION CTRL
BA3614-4648-9-56BC
DISCONTINUED BY MANUFACTURER, MOTOR, 1/4HP, 1750 RPM, 12V, TENV PMDC, FGB2010, E2-N-S-145
✓ IN STOCK!
£449.63
Price with VAT:
£539.56
DANAHER MOTION
PACIFIC SCIENTIFIC MOTION CTRL
R46SENA-TS-MD-NV-02
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, BRUSHLESS, 3.1 A, 1.7 OHMS, 7.3 NM, 283 V/KRPM, 2.70 V/RAD/SEC
✓ IN STOCK!
£1,270.95
Price with VAT:
£1,525.14
DANAHER MOTION
PACIFIC SCIENTIFIC MOTION CTRL
6410-001-N-N-N
DISCONTINUED BY MANUFACTURER, STEPPER DRIVE, 6410 MODEL, 7.1 AMP, 75 VDC
✓ IN STOCK!
£517.29
Price with VAT:
£620.74
PARKER
JM CLIPPER
11054-PD
OIL SEAL W/SPRING INLAY I.D 23MM O.D 62MM
✓ IN STOCK!
£8.09
Price with VAT:
£9.71
PARKER
JM CLIPPER
0275-10526
DISCONTINUED BY MANUFACTURER, OIL SEAL, 2-3/4IN ID, 3-3/8IN OD, 8MM WIDTH
✓ IN STOCK!
£18.02
Price with VAT:
£21.62
PARKER
JM CLIPPER
4QTR05
OIL SEAL, ROTARY LIP, 5.1813" INSIDE DIAMETER, 6.813" OUTSIDE DIAMETER, 0.438" WIDTH, NBR MATERIAL
✓ IN STOCK!
£3.85
Price with VAT:
£4.62
PARKER
JM CLIPPER
15518-H1L7
OIL SEAL, LOW SPEED, 3.938IN SHAFT DIAMETER , 4.409IN BORE, 0.354IN WIDTH, SHAFT SEAL MATERIAL RUBBER
✓ IN STOCK!
£6.98
Price with VAT:
£8.38
PARKER
JM CLIPPER
15887-LDS
OIL SEAL 83MM, 3.250" SHAFT, 4.719" BORE, 0.625" SEAL LENGTH
✓ IN STOCK!
£34.29
Price with VAT:
£41.15
PARKER
JM CLIPPER
0177-05985
OIL SEAL 2-1/2IN OUTER DIA 1-3/4IN INNER DIAMETER
✓ IN STOCK!
£6.40
Price with VAT:
£7.68
PARKER
JM CLIPPER
16794-HP
DISCONTINUED BY MANUFACTURER, OIL SEAL, 1-9/16IN ID, 2-5/16IN OD, 300PSI, 4000FPM
✓ IN STOCK!
£8.68
Price with VAT:
£10.42
PARKER
JM CLIPPER
11197
DISCONTINUED BY MANUFACTURER, OIL SEAL, 4-1/2 INCH BORE, 3-1/2 INCH SHAFT DIAMETER, 1/2 INCH WIDTH
✓ IN STOCK!
£27.80
Price with VAT:
£33.36
PARKER
JM CLIPPER
H1L5-LPD
DISCONTINUED BY MANUFACTURER, CLIPPER OIL SEAL, 2 IN BORE, 6755 LPD
✓ IN STOCK!
£5.36
Price with VAT:
£6.43
PARKER
JM CLIPPER
16601 H1L5
SEAL, LIP NBR SOLID, 10.938 SHAFT X 12.688 BORE X 0.563 SEAL LENGTH INCH
✓ IN STOCK!
£439.54
Price with VAT:
£527.45
PARKER
JM CLIPPER
18329
OIL SEAL, 1.575 IN SHAFT, 2.677 IN BORE, 0.433 IN SEAL LENGTH
✓ IN STOCK!
£12.50
Price with VAT:
£15.00
PARKER
JM CLIPPER
2-326
DISCONTINUED BY MANUFACTURER, O-RING, SILICONE,1.6IN DIAMETER
✓ IN STOCK!
£0.25
Price with VAT:
£0.30
PARKER
JM CLIPPER
11014 H1L5
CLIPPER OIL SEAL, GENERAL PURPOSE, SINGLE LIP ROTARY SHAFT, 3.250 INCH BORE DIAMETER, NITRILE BUTADIENE RUBBER
✓ IN STOCK!
£46.15
Price with VAT:
£55.38
PARKER
JM CLIPPER
9398-LUP-1
OIL SEAL, 2.188 INCH SHAFT, 3.250 INCH BORE, 0.438 INCH LENGTH, SPRING LOADED, GENERAL PURPOSE, SOLID, NITRILE
✓ IN STOCK!
£11.25
Price with VAT:
£13.50
PARKER
JM CLIPPER
0300-15632
JM CLIPPER, 0300-15632, 030015632, OIL SEAL, FLEXIBLE, WITH SPRING, 3 INCH SEAL ID
✓ IN STOCK!
£13.58
Price with VAT:
£16.30
PARKER
JM CLIPPER
4QTR13
DISCONTINUED BY MANUFACTURER, OIL SEAL, 5.5 X 6.62 X 438
✓ IN STOCK!
£6.87
Price with VAT:
£8.24
PARKER
JM CLIPPER
0250 09790
DISCONTINUED BY MANUFACTURER, OIL SEAL, ROUND, 9790-LUP-2, 3.25IN OD, 2.5IN BORE
✓ IN STOCK!
£24.45
Price with VAT:
£29.34
PARKER
JM CLIPPER
0487-4484
OIL SEAL, SPLIT, 4.875 INNER DIAMETER, 6.0 OUTER DIAMETER, 0.625 HEIGHT, NITRILE, SPRING
✓ IN STOCK!
£15.57
Price with VAT:
£18.68
PARKER
JM CLIPPER
9708-RPD
OIL SEAL,2-7/16IN ID,3.312IN OD,1/2IN WIDE
✓ IN STOCK!
£3.98
Price with VAT:
£4.78
PARKER
JM CLIPPER
0725-8847
DISCONTINUED BY MANUFACTURER,OIL SEAL, 0.725IN SHAFT,SPLIT
✓ IN STOCK!
£89.78
Price with VAT:
£107.73
PARKER
JM CLIPPER
8874-H1L5
SHAFT SEAL,1.938IN ID,2.875IN OD,0.438IN WIDTH,W/SPRING
✓ IN STOCK!
£25.62
Price with VAT:
£30.75
PARKER
JM CLIPPER
4976-H1L5
DISCONTINUED BY MANUFACTURER, OIL SEAL, 3IN BORE
✓ IN STOCK!
£9.73
Price with VAT:
£11.67
PARKER
JM CLIPPER
0168-10250
DISCONTINUED BY MANUFACTURER, OIL SEAL
✓ IN STOCK!
£3.54
Price with VAT:
£4.25
PARKER
JM CLIPPER
10100 H1L5
SEAL, LIP NBR SOLID, 3.250 SHAFT X 4.000 BORE X 0.438 SEAL LENGTH INCH
✓ IN STOCK!
£90.03
Price with VAT:
£108.03
PARKER
JM CLIPPER
10251-LUP
DISCONTINUED BY MANUFACTURER, OIL SEAL, 2.250 INCHSHAFT, 2.875 INCH BORE, 0.313 SEAL LENGTH
✓ IN STOCK!
£5.10
Price with VAT:
£6.12
PARKER
JM CLIPPER
9360-H1L5
OIL SEAL 9-1/8X7-5/8X5/8IN LUP0762
✓ IN STOCK!
£31.00
Price with VAT:
£37.20
PARKER
JM CLIPPER
9366-H1L5
OIL SEAL, 1.875" SHAFT DIA, 2.375" BORE DIA, SINGLE LIP, SPRING LOADED, 5,000 FT/MIN
✓ IN STOCK!
£57.50
Price with VAT:
£68.99
PARKER
JM CLIPPER
16677-H1L7
DISCONTINUED BY MANUFACTURER, OIL SEAL, SPRING-LESS
✓ IN STOCK!
£5.35
Price with VAT:
£6.42
