Product Search

    SEARCH NOW FOR ALL YOUR SANDVIK SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 51-100 of 496.
    SANDVIK 5757121

    SANDVIK

    5757121

    HYDRAULIC CHUCK SLEEVE: 3/4" ID, 1-1/4" OD, 1.4882" HEAD DIA
    £314.43 Price with VAT: £377.32 Buy Surplus As Low As £189.10 Price with VAT: £226.92
    £189.10 Price with VAT: £226.92
    SANDVIK SL70-R123H05LC-HP

    SANDVIK

    SL70-R123H05LC-HP

    COROCUT® 1-2 HEAD FOR PROFILING
    ✓ IN STOCK!
    £313.44 Price with VAT: £376.13 Buy Surplus As Low As £184.07 Price with VAT: £220.88
    £184.07 Price with VAT: £220.88
    SANDVIK 5721512

    SANDVIK

    5721512

    REPLACEABLE TIP MILLING SHANK: SERIES COROMILL 316, 6-1/2" PROJECTION, 5/8" STRAIGHT SHANK
    £312.21 Price with VAT: £374.65 Buy Surplus As Low As £187.62 Price with VAT: £225.14
    £187.62 Price with VAT: £225.14
    SANDVIK 5724508

    SANDVIK

    5724508

    HYDRAULIC CHUCK SLEEVE: 1" ID, 1.2598" OD, 1.4173" HEAD DIA
    £297.37 Price with VAT: £356.85 Buy Surplus As Low As £178.72 Price with VAT: £214.47
    £178.72 Price with VAT: £214.47
    SANDVIK 5722995

    SANDVIK

    5722995

    HYDRAULIC CHUCK SLEEVE: 1/8" ID, 0.7874" OD, 0.9843" HEAD DIA
    £289.96 Price with VAT: £347.95 Buy Surplus As Low As £174.27 Price with VAT: £209.13
    £174.27 Price with VAT: £209.13
    SANDVIK 5723012

    SANDVIK

    5723012

    HYDRAULIC CHUCK SLEEVE: 5/16" ID, 0.7874" OD, 0.9843" HEAD DIA
    £289.96 Price with VAT: £347.95 Buy Surplus As Low As £174.27 Price with VAT: £209.13
    £174.27 Price with VAT: £209.13
    SANDVIK 5723000

    SANDVIK

    5723000

    HYDRAULIC CHUCK SLEEVE: 3/16" ID, 0.7874" OD, 0.9843" HEAD DIA
    £289.96 Price with VAT: £347.95 Buy Surplus As Low As £174.27 Price with VAT: £209.13
    £174.27 Price with VAT: £209.13
    SANDVIK 5759484

    SANDVIK

    5759484

    HYDRAULIC CHUCK SLEEVE:
    £289.96 Price with VAT: £347.95 Buy Surplus As Low As £174.27 Price with VAT: £209.13
    £174.27 Price with VAT: £209.13
    SANDVIK 5760304

    SANDVIK

    5760304

    HYDRAULIC CHUCK SLEEVE: 8 MM ID, 20 MM OD, 25 MM HEAD DIA
    £289.96 Price with VAT: £347.95 Buy Surplus As Low As £174.27 Price with VAT: £209.13
    £174.27 Price with VAT: £209.13
    SANDVIK 5759527

    SANDVIK

    5759527

    HYDRAULIC CHUCK SLEEVE:
    £289.96 Price with VAT: £347.95 Buy Surplus As Low As £174.27 Price with VAT: £209.13
    £174.27 Price with VAT: £209.13
    SANDVIK 5759523

    SANDVIK

    5759523

    HYDRAULIC CHUCK SLEEVE:
    £289.96 Price with VAT: £347.95 Buy Surplus As Low As £174.27 Price with VAT: £209.13
    £174.27 Price with VAT: £209.13
    SANDVIK 5759633

    SANDVIK

    5759633

    ASSEMBLY FIXTURE BODY
    £287.73 Price with VAT: £345.28 Buy Surplus As Low As £172.79 Price with VAT: £207.35
    £172.79 Price with VAT: £207.35
    SANDVIK 5757285

    SANDVIK

    5757285

    16MM ID, 31.4MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 55MM LENGTH UNDER HEAD, THROUGH COOLANT
    £285.51 Price with VAT: £342.61 Buy Surplus As Low As £171.31 Price with VAT: £205.57
    £171.31 Price with VAT: £205.57
    SANDVIK 5723354

    SANDVIK

    5723354

    HYDRAULIC CHUCK SLEEVE: 1/2" ID, 0.9843" OD, 1.1811" HEAD DIA
    £279.58 Price with VAT: £335.49 Buy Surplus As Low As £168.34 Price with VAT: £202.01
    £168.34 Price with VAT: £202.01
    SANDVIK 5759942

    SANDVIK

    5759942

    COLLET CHUCK: ER COLLET, MODULAR CONNECTION SHANK 3.937" PROJECTION, THROUGH COOLANT
    £278.09 Price with VAT: £333.71 Buy Surplus As Low As £166.86 Price with VAT: £200.23
    £166.86 Price with VAT: £200.23
    SANDVIK 5759941

    SANDVIK

    5759941

    COLLET CHUCK: ER COLLET, MODULAR CONNECTION SHANK 3.937" PROJECTION, THROUGH COOLANT
    £278.09 Price with VAT: £333.71 Buy Surplus As Low As £166.86 Price with VAT: £200.23
    £166.86 Price with VAT: £200.23
    SANDVIK 570-DCLNL-32-12-L

    SANDVIK

    570-DCLNL-32-12-L

    T-MAX P TURNING TOOL 95 DEGREE CUTTING EDGE ANGLE
    £275.13 Price with VAT: £330.15 Buy Surplus As Low As £137.93 Price with VAT: £165.52
    £137.93 Price with VAT: £165.52
    SANDVIK 5722698

    SANDVIK

    5722698

    HYDRAULIC CHUCK SLEEVE: 1/8" ID, 0.4724" OD, 0.6299" HEAD DIA
    £261.04 Price with VAT: £313.24 Buy Surplus As Low As £157.22 Price with VAT: £188.66
    £157.22 Price with VAT: £188.66
    SANDVIK 5723349

    SANDVIK

    5723349

    HYDRAULIC CHUCK SLEEVE: 3/8" ID, 0.7874" OD, 0.9843" HEAD DIA
    £261.04 Price with VAT: £313.24 Buy Surplus As Low As £157.22 Price with VAT: £188.66
    £157.22 Price with VAT: £188.66
    SANDVIK 5722705

    SANDVIK

    5722705

    HYDRAULIC CHUCK SLEEVE: 1/4" ID, 0.4724" OD, 0.6299" HEAD DIA
    £261.04 Price with VAT: £313.24 Buy Surplus As Low As £157.22 Price with VAT: £188.66
    £157.22 Price with VAT: £188.66
    SANDVIK 5722702

    SANDVIK

    5722702

    HYDRAULIC CHUCK SLEEVE: 3/16" ID, 0.4724" OD, 0.6299" HEAD DIA
    £261.04 Price with VAT: £313.24 Buy Surplus As Low As £157.22 Price with VAT: £188.66
    £157.22 Price with VAT: £188.66
    SANDVIK 5760286

    SANDVIK

    5760286

    HYDRAULIC CHUCK SLEEVE: 3 MM ID, 12 MM OD, 16 MM HEAD DIA
    £261.04 Price with VAT: £313.24 Buy Surplus As Low As £157.22 Price with VAT: £188.66
    £157.22 Price with VAT: £188.66
    SANDVIK 5760296

    SANDVIK

    5760296

    HYDRAULIC CHUCK SLEEVE: 6 MM ID, 12 MM OD, 16 MM HEAD DIA
    £261.04 Price with VAT: £313.24 Buy Surplus As Low As £157.22 Price with VAT: £188.66
    £157.22 Price with VAT: £188.66
    SANDVIK 5757279

    SANDVIK

    5757279

    HYDRAULIC CHUCK SLEEVE: 8 MM ID, 31.4 MM HEAD DIA COOLANT THROUGH, 1.9685" LENGTH UNDER HEAD, STEEL
    £261.04 Price with VAT: £313.24 Buy Surplus As Low As £157.22 Price with VAT: £188.66
    £157.22 Price with VAT: £188.66
    SANDVIK 5723373

    SANDVIK

    5723373

    HYDRAULIC CHUCK SLEEVE: 7/16" ID, 0.7874" OD, 0.9843" HEAD DIA
    £261.04 Price with VAT: £313.24 Buy Surplus As Low As £157.22 Price with VAT: £188.66
    £157.22 Price with VAT: £188.66
    SANDVIK 5721454

    SANDVIK

    5721454

    COLLET CHUCK: ER COLLET, TAPER SHANK
    £260.30 Price with VAT: £312.35 Buy Surplus As Low As £156.47 Price with VAT: £187.77
    £156.47 Price with VAT: £187.77
    SANDVIK 5721402

    SANDVIK

    5721402

    INDEXABLE BORING BAR: A20S-SDUCR11, 25 MM MIN BORE DIA, RIGHT HAND CUT, 20 MM SHANK DIA, -3 ° LEAD ANGLE, STEEL
    £260.30 Price with VAT: £312.35 Buy Surplus As Low As £156.47 Price with VAT: £187.77
    £156.47 Price with VAT: £187.77
    SANDVIK 5721836

    SANDVIK

    5721836

    INDEXABLE BORING BAR: A12S-SVUBR2-EB1, 1.0118" MIN BORE DIA, RIGHT HAND CUT, 3/4" SHANK DIA, -3 ° LEAD ANGLE, STEEL
    £260.30 Price with VAT: £312.35 Buy Surplus As Low As £156.47 Price with VAT: £187.77
    £156.47 Price with VAT: £187.77
    SANDVIK A8514

    SANDVIK

    A8514

    END MILL INDECABLE INSERT COOLANT BULL NOSE
    £254.96 Price with VAT: £305.95 Buy Surplus As Low As £123.91 Price with VAT: £148.69
    £123.91 Price with VAT: £148.69
    SANDVIK 5762829

    SANDVIK

    5762829

    5412.120 CLAMP FOR INDEXABLES (MOQ=1, PKG QTY=1)
    £251.40 Price with VAT: £301.68 Buy Surplus As Low As £151.28 Price with VAT: £181.54
    £151.28 Price with VAT: £181.54
    SANDVIK 6241312

    SANDVIK

    6241312

    SCREW MACHINE LENGTH DRILL BIT: 12.00 MM (0.4724) DIA, 140 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)
    £243.98 Price with VAT: £292.78 Buy Surplus As Low As £146.83 Price with VAT: £176.20
    £146.83 Price with VAT: £176.20
    SANDVIK 5721622

    SANDVIK

    5721622

    INDEXABLE BORING BAR: A08M-SWLPR2, 0.5984" MIN BORE DIA, RIGHT HAND CUT, 1/2" SHANK DIA, -5 ° LEAD ANGLE, STEEL
    £238.05 Price with VAT: £285.66 Buy Surplus As Low As £143.13 Price with VAT: £171.75
    £143.13 Price with VAT: £171.75
    SANDVIK 5721750

    SANDVIK

    5721750

    INDEXABLE BORING BAR: A06M-SDUPR2-E, 0.5591" MIN BORE DIA, RIGHT HAND CUT, 3/8" SHANK DIA, -3 ° LEAD ANGLE, STEEL
    £238.05 Price with VAT: £285.66 Buy Surplus As Low As £143.13 Price with VAT: £171.75
    £143.13 Price with VAT: £171.75
    SANDVIK 5721272

    SANDVIK

    5721272

    INDEXABLE BORING BAR: A08M-SDXCR2, 0.6811" MIN BORE DIA, RIGHT HAND CUT, 1/2" SHANK DIA, 27.5 ° LEAD ANGLE, STEEL
    £238.05 Price with VAT: £285.66 Buy Surplus As Low As £143.13 Price with VAT: £171.75
    £143.13 Price with VAT: £171.75
    SANDVIK 5721579

    SANDVIK

    5721579

    INDEXABLE BORING BAR: A10K-SDXCL2-R, 0.7874" MIN BORE DIA, LEFT HAND CUT, 5/8" SHANK DIA, -27.5 ° LEAD ANGLE, STEEL
    £235.82 Price with VAT: £282.99 Buy Surplus As Low As £141.64 Price with VAT: £169.97
    £141.64 Price with VAT: £169.97
    SANDVIK 5721392

    SANDVIK

    5721392

    INDEXABLE BORING BAR: A16R-SDXCR07, 20 MM MIN BORE DIA, RIGHT HAND CUT, 16 MM SHANK DIA, 27.5 ° LEAD ANGLE, STEEL
    £235.82 Price with VAT: £282.99 Buy Surplus As Low As £141.64 Price with VAT: £169.97
    £141.64 Price with VAT: £169.97
    SANDVIK 5721364

    SANDVIK

    5721364

    INDEXABLE BORING BAR: A06F-STUCR05-GR, 7 MM MIN BORE DIA, RIGHT HAND CUT, 6 MM SHANK DIA, -3 ° LEAD ANGLE, STEEL
    £235.82 Price with VAT: £282.99 Buy Surplus As Low As £141.64 Price with VAT: £169.97
    £141.64 Price with VAT: £169.97
    SANDVIK 393.CGS-12 06 40

    SANDVIK

    393.CGS-12 06 40

    CYLINDRICAL COLLET FOR HYDRAULIC MEMBRANE CHUCKS, WITH FLANGE -SIZE 12
    £233.60 Price with VAT: £280.32 Buy Surplus As Low As £140.16 Price with VAT: £168.19
    £140.16 Price with VAT: £168.19
    SANDVIK 5722707

    SANDVIK

    5722707

    HYDRAULIC CHUCK SLEEVE: 5/16" ID, 0.4724" OD, 0.6299" HEAD DIA
    £230.63 Price with VAT: £276.76 Buy Surplus As Low As £138.68 Price with VAT: £166.41
    £138.68 Price with VAT: £166.41
    SANDVIK 6766945

    SANDVIK

    6766945

    16MM ID X 20MM OD, 25MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 50MM LENGTH UNDER HEAD, THROUGH COOLANT
    £230.63 Price with VAT: £276.76 Buy Surplus As Low As £138.68 Price with VAT: £166.41
    £138.68 Price with VAT: £166.41
    SANDVIK 570-32R123J18B

    SANDVIK

    570-32R123J18B

    BLADE 18MM 90DEGREE
    £212.83 Price with VAT: £255.40 Buy Surplus As Low As £106.79 Price with VAT: £128.15
    £106.79 Price with VAT: £128.15
    SANDVIK C4-DCLNL-27050-12

    SANDVIK

    C4-DCLNL-27050-12

    TURNING TOOL T MAX P HOLDS RHOMBIC 80 INSERT
    £212.83 Price with VAT: £255.40 Buy Surplus As Low As £127.55 Price with VAT: £153.06
    £127.55 Price with VAT: £153.06
    SANDVIK 5722028

    SANDVIK

    5722028

    INDEXABLE BORING BAR: A16R-SCLCR09, 20 MM MIN BORE DIA, RIGHT HAND CUT, 16 MM SHANK DIA, -5 ° LEAD ANGLE, STEEL
    £212.83 Price with VAT: £255.40 Buy Surplus As Low As £128.29 Price with VAT: £153.95
    £128.29 Price with VAT: £153.95
    SANDVIK 132P-321049-B

    SANDVIK

    132P-321049-B

    CYLINDRICAL SLEEVE
    £206.90 Price with VAT: £248.28 Buy Surplus As Low As £103.82 Price with VAT: £124.59
    £103.82 Price with VAT: £124.59
    SANDVIK 5721245

    SANDVIK

    5721245

    COLLET CHUCK: ER COLLET, TAPER SHANK
    £198.74 Price with VAT: £238.49 Buy Surplus As Low As £119.39 Price with VAT: £143.27
    £119.39 Price with VAT: £143.27
    SANDVIK 5721250

    SANDVIK

    5721250

    COLLET CHUCK: ER COLLET, TAPER SHANK
    £198.74 Price with VAT: £238.49 Buy Surplus As Low As £119.39 Price with VAT: £143.27
    £119.39 Price with VAT: £143.27
    SANDVIK 5721242

    SANDVIK

    5721242

    COLLET CHUCK: ER COLLET, TAPER SHANK
    £198.74 Price with VAT: £238.49 Buy Surplus As Low As £119.39 Price with VAT: £143.27
    £119.39 Price with VAT: £143.27
    SANDVIK 5721240

    SANDVIK

    5721240

    COLLET CHUCK: ER COLLET, TAPER SHANK
    £198.74 Price with VAT: £238.49 Buy Surplus As Low As £119.39 Price with VAT: £143.27
    £119.39 Price with VAT: £143.27
    SANDVIK 5721237

    SANDVIK

    5721237

    COLLET CHUCK: ER COLLET, TAPER SHANK
    £198.74 Price with VAT: £238.49 Buy Surplus As Low As £119.39 Price with VAT: £143.27
    £119.39 Price with VAT: £143.27
    SANDVIK 5721438

    SANDVIK

    5721438

    COLLET CHUCK: ER COLLET, TAPER SHANK
    £198.74 Price with VAT: £238.49 Buy Surplus As Low As £119.39 Price with VAT: £143.27
    £119.39 Price with VAT: £143.27
    Previous Next
    1 2 3 4 5 6 7 8 9 10