Product Search

    SEARCH NOW FOR ALL YOUR SANDVIK SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 151-200 of 496.
    SANDVIK C6-DCLNL-45065-16

    SANDVIK

    C6-DCLNL-45065-16

    CUTTING UNIT FOR TURNING, MINIMUM BORE DIAMETER (DMIN1)4.921IN, MAXIMUM OVERHANG (OHX)2.559IN, TOOL CUTTING EDGE ANGLE (KAPR) 95DEG
    £187.25 Price with VAT: £224.70 Buy Surplus As Low As £93.62 Price with VAT: £112.35
    £93.62 Price with VAT: £112.35
    SANDVIK 5727060

    SANDVIK

    5727060

    CXR/L CLAMP FOR INDEXABLES
    £14.83 Price with VAT: £17.80 Buy Surplus As Low As £8.90 Price with VAT: £10.68
    £8.90 Price with VAT: £10.68
    SANDVIK 5726977

    SANDVIK

    5726977

    CXR/L CLAMP FOR INDEXABLES
    £19.28 Price with VAT: £23.14 Buy Surplus As Low As £11.87 Price with VAT: £14.24
    £11.87 Price with VAT: £14.24
    SANDVIK 5727020

    SANDVIK

    5727020

    CXR/L CLAMP FOR INDEXABLES
    £14.83 Price with VAT: £17.80 Buy Surplus As Low As £8.90 Price with VAT: £10.68
    £8.90 Price with VAT: £10.68
    SANDVIK 393-CGS-12-08-40

    SANDVIK

    393-CGS-12-08-40

    CYLINDRICAL COLLET FOR HYDRAULIC MEMBRANE CHUCKS, WITH FLANGE -SIZE 12
    ✓ IN STOCK!
    £154.81 Price with VAT: £185.77 Buy Surplus As Low As £75.22 Price with VAT: £90.26
    £75.22 Price with VAT: £90.26
    SANDVIK 393.CGS-12 06 40

    SANDVIK

    393.CGS-12 06 40

    CYLINDRICAL COLLET FOR HYDRAULIC MEMBRANE CHUCKS, WITH FLANGE -SIZE 12
    £233.60 Price with VAT: £280.32 Buy Surplus As Low As £140.16 Price with VAT: £168.19
    £140.16 Price with VAT: £168.19
    SANDVIK 132P-321049-B

    SANDVIK

    132P-321049-B

    CYLINDRICAL SLEEVE
    £206.90 Price with VAT: £248.28 Buy Surplus As Low As £103.82 Price with VAT: £124.59
    £103.82 Price with VAT: £124.59
    SANDVIK 393.CG-12 06 40

    SANDVIK

    393.CG-12 06 40

    CYLINDRICAL SLITTED COLLET
    ✓ IN STOCK!
    £180.10 Price with VAT: £216.12 Buy Surplus As Low As £99.54 Price with VAT: £119.44
    £99.54 Price with VAT: £119.44
    SANDVIK A-5818

    SANDVIK

    A-5818

    DISCONTINUED BY MANUFACTURER, 949211302, SHELL MILLING HEAD, INDEXABLE
    ✓ IN STOCK!
    Buy Surplus As Low As £110.98 Price with VAT: £133.17
    £110.98 Price with VAT: £133.17
    SANDVIK 912.0155-00

    SANDVIK

    912.0155-00

    DISCONTINUED BY MANUFACTURER, AIR FILTER CARTRIDGE, HIGH-EFFICIENCY
    ✓ IN STOCK!
    Buy Surplus As Low As £19.79 Price with VAT: £23.74
    £19.79 Price with VAT: £23.74
    SANDVIK FK1500

    SANDVIK

    FK1500

    DISCONTINUED BY MANUFACTURER, AIR FILTER,FLOW DIRECTION: FROM OUTSIDE, PAPER,TYPE OF FLUID: OIL
    ✓ IN STOCK!
    Buy Surplus As Low As £238.71 Price with VAT: £286.45
    £238.71 Price with VAT: £286.45
    SANDVIK N260.8-1204-F-3020

    SANDVIK

    N260.8-1204-F-3020

    DISCONTINUED BY MANUFACTURER, CARBIDE INSERT, AUTO , AF, FOR MILLING , PRICE/BOX
    £95.87 Price with VAT: £115.05 Buy Surplus As Low As £57.67 Price with VAT: £69.21
    £57.67 Price with VAT: £69.21
    SANDVIK LF123E032-16B

    SANDVIK

    LF123E032-16B

    DISCONTINUED BY MANUFACTURER, COROCUT TOOL HOLDER, 127MM LENGTH, 25.4MM SHANK HEIGHT, 8.128 MAX CUTTING DEPTH
    ✓ IN STOCK!
    Buy Surplus As Low As £77.07 Price with VAT: £92.48
    £77.07 Price with VAT: £92.48
    SANDVIK 930-C4-S-12-080

    SANDVIK

    930-C4-S-12-080

    DISCONTINUED BY MANUFACTURER, COROMANT CAPTO TO COROCHUCK 930 CAPTO, BOLT AND SEGMENT CLAMPING, SIZE C4
    Buy Surplus As Low As £487.22 Price with VAT: £584.66
    £487.22 Price with VAT: £584.66
    SANDVIK PTFNL2020

    SANDVIK

    PTFNL2020

    DISCONTINUED BY MANUFACTURER, CUTTING INDEXABLE, TURNING TOOL HOLDER, LEVER LOCK STYLE, FOR FACING 91 DEGREE APPROACH ANGLE, NEGATIVE TRIANGLE INSERTS, LEFT HANDED
    Buy Surplus As Low As £39.70 Price with VAT: £47.65
    £39.70 Price with VAT: £47.65
    SANDVIK C4-DDHNR-27055-15

    SANDVIK

    C4-DDHNR-27055-15

    DISCONTINUED BY MANUFACTURER, CUTTING UNIT, 107.5 DEGREE ANGLE, CABLE CLAMP, 27 MM WIDTH, 55 MM LENGTH
    ✓ IN STOCK!
    Buy Surplus As Low As £73.96 Price with VAT: £88.75
    £73.96 Price with VAT: £88.75
    SANDVIK 392.45520-50 25 100

    SANDVIK

    392.45520-50 25 100

    DISCONTINUED BY MANUFACTURER, END MILL. COROMANT, 25 MM
    ✓ IN STOCK!
    Buy Surplus As Low As £78.36 Price with VAT: £94.04
    £78.36 Price with VAT: £94.04
    SANDVIK BT25-TLSR-2545A-2I4M

    SANDVIK

    BT25-TLSR-2545A-2I4M

    DISCONTINUED BY MANUFACTURER, INSERT HOLDER CLAMP TYPE, BLACK
    Buy Surplus As Low As £40.05 Price with VAT: £48.05
    £40.05 Price with VAT: £48.05
    SANDVIK BT25-STGCR-2532-16

    SANDVIK

    BT25-STGCR-2532-16

    DISCONTINUED BY MANUFACTURER, INSERT HOLDER, CLAMP TYPE
    Buy Surplus As Low As £44.50 Price with VAT: £53.39
    £44.50 Price with VAT: £53.39
    SANDVIK 431-220142R59

    SANDVIK

    431-220142R59

    DISCONTINUED BY MANUFACTURER, MILL CUTTER, 2-1/4IN BORE, 6-1/4IN OD
    ✓ IN STOCK!
    Buy Surplus As Low As £44.37 Price with VAT: £53.24
    £44.37 Price with VAT: £53.24
    SANDVIK N331.1A-14-50-08M-KM-3040

    SANDVIK

    N331.1A-14-50-08M-KM-3040

    DISCONTINUED BY MANUFACTURER, MILLING INSERT, PACK OF 10
    Buy Surplus As Low As £55.62 Price with VAT: £66.74
    £55.62 Price with VAT: £66.74
    SANDVIK 930-HA06-HD-25-110

    SANDVIK

    930-HA06-HD-25-110

    DISCONTINUED BY MANUFACTURER, MODULAR CONNECTION, 1 AXIAL CONCENTRIC ENTRY / EXIT, 1.8902 INCH FUNCTIONAL DIAMETER, 2.4803 INCH CONNECTION DIAMETER, STEEL, REPLACED BY 8107455
    Buy Surplus As Low As £369.31 Price with VAT: £443.17
    £369.31 Price with VAT: £443.17
    SANDVIK TM200-021/6-FRONT-PANEL

    SANDVIK

    TM200-021/6-FRONT-PANEL

    DISCONTINUED BY MANUFACTURER, OPERATOR INTERFACE, FOR TM200 PROCESS CONTROLLER, 6 SLOTS, WITH RESET BUTTON
    Buy Surplus As Low As £889.90 Price with VAT: £1,067.88
    £889.90 Price with VAT: £1,067.88
    Repair Yours £741.58 Price with VAT: £889.90
    SANDVIK VDO

    SANDVIK

    VDO

    DISCONTINUED BY MANUFACTURER, PRESSURE GAUGE, CANCOCKPIT SLAVE, 0-250 BAR
    Buy Surplus As Low As £90.00 Price with VAT: £108.00
    £90.00 Price with VAT: £108.00
    SANDVIK TM-2000-012/2

    SANDVIK

    TM-2000-012/2

    DISCONTINUED BY MANUFACTURER, PROCESS CONTROLLER
    Buy Surplus As Low As £660.00 Price with VAT: £792.00
    £660.00 Price with VAT: £792.00
    SANDVIK TM2000-021/2

    SANDVIK

    TM2000-021/2

    DISCONTINUED BY MANUFACTURER, PROCESS CONTROLLER
    Buy Surplus As Low As £1,078.35 Price with VAT: £1,294.02
    £1,078.35 Price with VAT: £1,294.02
    Repair Yours £962.82 Price with VAT: £1,155.38
    SANDVIK 5680-046-03

    SANDVIK

    5680-046-03

    DISCONTINUED BY MANUFACTURER, SCREWDRIVER, 7 IP, TORX PLUS
    ✓ IN STOCK!
    Buy Surplus As Low As £20.00 Price with VAT: £24.00
    £20.00 Price with VAT: £24.00
    SANDVIK A392.45277-50 02 055A

    SANDVIK

    A392.45277-50 02 055A

    DISCONTINUED BY MANUFACTURER, TOOL HOLDER, CORODRILL, ADJUSTABLE CAT50 TO ISO9766
    ✓ IN STOCK!
    Buy Surplus As Low As £346.19 Price with VAT: £415.43
    £346.19 Price with VAT: £415.43
    SANDVIK TM-SU-100

    SANDVIK

    TM-SU-100

    DISCONTINUED BY MANUFACTURER, TOOL MONITOR, 100/115/230VAC
    Buy Surplus As Low As £308.10 Price with VAT: £369.72
    £308.10 Price with VAT: £369.72
    Repair Yours £269.59 Price with VAT: £323.51
    SANDVIK TCMT-16-T3 02-UF-4025

    SANDVIK

    TCMT-16-T3 02-UF-4025

    DISCONTINUED BY MANUFACTURER, TURNING INSERT, INSERT SIZE AND SHAPE: TC16T3, GRADE: 4025, P25,K20, 10/PKG
    Buy Surplus As Low As £10.38 Price with VAT: £12.46
    £10.38 Price with VAT: £12.46
    SANDVIK C5PCLNL2211012

    SANDVIK

    C5PCLNL2211012

    DISCONTINUED BY MANUFACTURER, TURNING TOOL CUTTING UNIT, 110MM FUNCTIONAL LENGTH
    ✓ IN STOCK!
    Buy Surplus As Low As £90.59 Price with VAT: £108.71
    £90.59 Price with VAT: £108.71
    Repair Yours Contact Us
    SANDVIK A8514

    SANDVIK

    A8514

    END MILL INDECABLE INSERT COOLANT BULL NOSE
    £254.96 Price with VAT: £305.95 Buy Surplus As Low As £123.91 Price with VAT: £148.69
    £123.91 Price with VAT: £148.69
    SANDVIK 393.14-16 0300

    SANDVIK

    393.14-16 0300

    ER COLLET, CYLINDRICAL CLAMPING -METRIC: 3.0 - 2.0
    ✓ IN STOCK!
    £70.95 Price with VAT: £85.14 Buy Surplus As Low As £31.67 Price with VAT: £38.00
    £31.67 Price with VAT: £38.00
    SANDVIK 5722934

    SANDVIK

    5722934

    ER COLLET: ER20, 0.8189" COLLET SIZE, COOLANT
    £197.26 Price with VAT: £236.71 Buy Surplus As Low As £118.65 Price with VAT: £142.38
    £118.65 Price with VAT: £142.38
    SANDVIK 5760511

    SANDVIK

    5760511

    ER: ER25, 5 MM
    £93.44 Price with VAT: £112.13 Buy Surplus As Low As £56.36 Price with VAT: £67.63
    £56.36 Price with VAT: £67.63
    SANDVIK 5763406

    SANDVIK

    5763406

    ER32 COLLET NUT
    £52.65 Price with VAT: £63.18 Buy Surplus As Low As £31.89 Price with VAT: £38.27
    £31.89 Price with VAT: £38.27
    SANDVIK A-5804

    SANDVIK

    A-5804

    FACE MILL ADAPTER
    ✓ IN STOCK!
    Buy Surplus As Low As £87.31 Price with VAT: £104.78
    £87.31 Price with VAT: £104.78
    SANDVIK A-5808

    SANDVIK

    A-5808

    FACE MILL ADAPTER
    Buy Surplus As Low As £100.11 Price with VAT: £120.14
    £100.11 Price with VAT: £120.14
    SANDVIK R390-050Q22-11M

    SANDVIK

    R390-050Q22-11M

    FACE MILL CUTTER SQUARE SHOULDER 50MM MM DIA
    £330.75 Price with VAT: £396.90 Buy Surplus As Low As £198.74 Price with VAT: £238.49
    £198.74 Price with VAT: £238.49
    Repair Yours £165.37 Price with VAT: £198.45
    SANDVIK 431-221142-R13

    SANDVIK

    431-221142-R13

    FACE MILL SHOULDER CUTTER
    ✓ IN STOCK!
    £34.04 Price with VAT: £40.85 Buy Surplus As Low As £16.13 Price with VAT: £19.36
    £16.13 Price with VAT: £19.36
    SANDVIK 431-220142-L53

    SANDVIK

    431-220142-L53

    FACE MILLING CUTTER 2-1/4INCH ARBOR
    ✓ IN STOCK!
    £38.04 Price with VAT: £45.65 Buy Surplus As Low As £14.14 Price with VAT: £16.97
    £14.14 Price with VAT: £16.97
    SANDVIK 946260005

    SANDVIK

    946260005

    FACE MILLING CUTTING TOOL, MILLING ADAPTER
    Buy Surplus As Low As £35.41 Price with VAT: £42.49
    £35.41 Price with VAT: £42.49
    SANDVIK 431-220142R60

    SANDVIK

    431-220142R60

    FACE/SHOULDER MILL
    £71.19 Price with VAT: £85.43 Buy Surplus As Low As £43.01 Price with VAT: £51.61
    £43.01 Price with VAT: £51.61
    SANDVIK 431-220142R60-1

    SANDVIK

    431-220142R60-1

    FACE/SHOULDER MILL
    £69.98 Price with VAT: £83.98 Buy Surplus As Low As £38.26 Price with VAT: £45.91
    £38.26 Price with VAT: £45.91
    Repair Yours Contact Us
    SANDVIK 266RG-16NT01C080M 1125

    SANDVIK

    266RG-16NT01C080M 1125

    FULL THREAD PROFILE INSERT, EXTERNAL THREAD, 8 THREADS PER INCH, 1 TOOTH, 3 CUTTING EDGE, 4.4 MM FIXING HOLE DIAMETER, RIGHT HAND, T-MAX U-LOCK, T-MAX TWIN-LOCK
    £40.00 Price with VAT: £48.00 Buy Surplus As Low As £24.00 Price with VAT: £28.80
    £24.00 Price with VAT: £28.80
    SANDVIK 5564001-071

    SANDVIK

    5564001-071

    GAS SPRING
    £4,552.58 Price with VAT: £5,463.09 Buy Surplus As Low As £2,731.99 Price with VAT: £3,278.39
    £2,731.99 Price with VAT: £3,278.39
    SANDVIK 20625-A

    SANDVIK

    20625-A

    GASKET ASSEMBLY
    £9.64 Price with VAT: £11.57 Buy Surplus As Low As £5.66 Price with VAT: £6.79
    £5.66 Price with VAT: £6.79
    SANDVIK 5726420

    SANDVIK

    5726420

    GROOVING TOOL:
    £51.91 Price with VAT: £62.29 Buy Surplus As Low As £31.15 Price with VAT: £37.38
    £31.15 Price with VAT: £37.38
    SANDVIK 5726702

    SANDVIK

    5726702

    GROOVING TOOL:
    £56.36 Price with VAT: £67.63 Buy Surplus As Low As £34.11 Price with VAT: £40.94
    £34.11 Price with VAT: £40.94
    SANDVIK 5726616

    SANDVIK

    5726616

    GROOVING TOOL:
    £74.16 Price with VAT: £88.99 Buy Surplus As Low As £44.50 Price with VAT: £53.39
    £44.50 Price with VAT: £53.39
    Previous Next
    1 2 3 4 5 6 7 8 9 10