Product Search

    SEARCH NOW FOR ALL YOUR SANDVIK SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 151-200 of 496.
    SANDVIK 5727131

    SANDVIK

    5727131

    COLLET CHUCK: ER COLLET, MODULAR CONNECTION SHANK
    £499.83 Price with VAT: £599.79 Buy Surplus As Low As £300.34 Price with VAT: £360.41
    £300.34 Price with VAT: £360.41
    SANDVIK 5723349

    SANDVIK

    5723349

    HYDRAULIC CHUCK SLEEVE: 3/8" ID, 0.7874" OD, 0.9843" HEAD DIA
    £261.04 Price with VAT: £313.24 Buy Surplus As Low As £157.22 Price with VAT: £188.66
    £157.22 Price with VAT: £188.66
    SANDVIK 5726723

    SANDVIK

    5726723

    GROOVING TOOL: INTERIOR, LEFT HAND, 7 MM SHANK DIA, 2.50 MM GROOVE WIDTH
    £64.52 Price with VAT: £77.42 Buy Surplus As Low As £39.30 Price with VAT: £47.16
    £39.30 Price with VAT: £47.16
    SANDVIK 5721242

    SANDVIK

    5721242

    COLLET CHUCK: ER COLLET, TAPER SHANK
    £198.74 Price with VAT: £238.49 Buy Surplus As Low As £119.39 Price with VAT: £143.27
    £119.39 Price with VAT: £143.27
    SANDVIK 5694368

    SANDVIK

    5694368

    A170.38 CLAMP SET FOR INDEXABLES
    £36.34 Price with VAT: £43.61 Buy Surplus As Low As £22.25 Price with VAT: £26.70
    £22.25 Price with VAT: £26.70
    SANDVIK 5722995

    SANDVIK

    5722995

    HYDRAULIC CHUCK SLEEVE: 1/8" ID, 0.7874" OD, 0.9843" HEAD DIA
    £289.96 Price with VAT: £347.95 Buy Surplus As Low As £174.27 Price with VAT: £209.13
    £174.27 Price with VAT: £209.13
    SANDVIK 440-009263R1663

    SANDVIK

    440-009263R1663

    CUTTING INSERT, CARBIDE, TRIANGULAR SHAPE, GRAY
    £47.46 Price with VAT: £56.95 Buy Surplus As Low As £23.73 Price with VAT: £28.48
    £23.73 Price with VAT: £28.48
    SANDVIK C4-LC2085-24102-16

    SANDVIK

    C4-LC2085-24102-16

    COROMANT CAPTO CLMP UNIT 5727671, MANUAL CLAMPING UNIT, SQUARE SHANK, CAMSHAFT ACTIVATED, C4 COUPLING, COOLANT THROUGH
    £1,218.42 Price with VAT: £1,462.11 Buy Surplus As Low As £731.20 Price with VAT: £877.44
    £731.20 Price with VAT: £877.44
    SANDVIK A20-R825A-AA120-RA

    SANDVIK

    A20-R825A-AA120-RA

    SANDVIK, A20-R825A-AA120-RA, A20R825AAA120RA, CYLINDRICAL SHANK, 1.142IN MAX CUTTING DIAMETER
    £1,572.16 Price with VAT: £1,886.59 Buy Surplus As Low As £943.29 Price with VAT: £1,131.95
    £943.29 Price with VAT: £1,131.95
    SANDVIK C6-391.63-40-167

    SANDVIK

    C6-391.63-40-167

    SANDVIK, C6-391.63-40-167, C63916340167, TOOL HOLDER ADAPTER
    £545.27 Price with VAT: £654.33 Buy Surplus As Low As £273.38 Price with VAT: £328.06
    £273.38 Price with VAT: £328.06
    Repair Yours £254.36 Price with VAT: £305.24
    SANDVIK S941-557768

    SANDVIK

    S941-557768

    SANDVIK, S941-557768, S941557768, TOOL ADAPTER
    £1,257.72 Price with VAT: £1,509.27 Buy Surplus As Low As £628.86 Price with VAT: £754.63
    £628.86 Price with VAT: £754.63
    SANDVIK A20M-SDXCL-11R

    SANDVIK

    A20M-SDXCL-11R

    BORING BAR/INSERT HOLDER 120 DEGREE CUTTING
    £163.89 Price with VAT: £196.67 Buy Surplus As Low As £82.32 Price with VAT: £98.78
    £82.32 Price with VAT: £98.78
    SANDVIK C4-CP-01

    SANDVIK

    C4-CP-01

    COVER PLUGS
    £43.29 Price with VAT: £51.94 Buy Surplus As Low As £25.97 Price with VAT: £31.16
    £25.97 Price with VAT: £31.16
    SANDVIK 570-32R123J18B

    SANDVIK

    570-32R123J18B

    BLADE 18MM 90DEGREE
    £212.83 Price with VAT: £255.40 Buy Surplus As Low As £106.79 Price with VAT: £128.15
    £106.79 Price with VAT: £128.15
    SANDVIK 132P-321049-B

    SANDVIK

    132P-321049-B

    CYLINDRICAL SLEEVE
    £206.90 Price with VAT: £248.28 Buy Surplus As Low As £103.82 Price with VAT: £124.59
    £103.82 Price with VAT: £124.59
    SANDVIK 5721729

    SANDVIK

    5721729

    A170.38 CLAMP SET FOR INDEXABLES
    £36.34 Price with VAT: £43.61 Buy Surplus As Low As £22.25 Price with VAT: £26.70
    £22.25 Price with VAT: £26.70
    SANDVIK 5721438

    SANDVIK

    5721438

    COLLET CHUCK: ER COLLET, TAPER SHANK
    £198.74 Price with VAT: £238.49 Buy Surplus As Low As £119.39 Price with VAT: £143.27
    £119.39 Price with VAT: £143.27
    SANDVIK 5726702

    SANDVIK

    5726702

    GROOVING TOOL:
    £56.36 Price with VAT: £67.63 Buy Surplus As Low As £34.11 Price with VAT: £40.94
    £34.11 Price with VAT: £40.94
    SANDVIK 5721248

    SANDVIK

    5721248

    COLLET CHUCK: ER COLLET, TAPER SHANK
    £198.74 Price with VAT: £238.49 Buy Surplus As Low As £119.39 Price with VAT: £143.27
    £119.39 Price with VAT: £143.27
    SANDVIK 5726616

    SANDVIK

    5726616

    GROOVING TOOL:
    £74.16 Price with VAT: £88.99 Buy Surplus As Low As £44.50 Price with VAT: £53.39
    £44.50 Price with VAT: £53.39
    SANDVIK 5726553

    SANDVIK

    5726553

    GROOVING TOOL:
    £56.36 Price with VAT: £67.63 Buy Surplus As Low As £34.11 Price with VAT: £40.94
    £34.11 Price with VAT: £40.94
    SANDVIK 930-C4-S-12-080

    SANDVIK

    930-C4-S-12-080

    DISCONTINUED BY MANUFACTURER, COROMANT CAPTO TO COROCHUCK 930 CAPTO, BOLT AND SEGMENT CLAMPING, SIZE C4
    Buy Surplus As Low As £487.22 Price with VAT: £584.66
    £487.22 Price with VAT: £584.66
    SANDVIK 435-810111-L62

    SANDVIK

    435-810111-L62

    SANDVIK, 435-810111L62, 435810111L62, LATHE, TOOL HOLDER
    £456.07 Price with VAT: £547.29 Buy Surplus As Low As £228.41 Price with VAT: £274.09
    £228.41 Price with VAT: £274.09
    SANDVIK 5764130

    SANDVIK

    5764130

    KEY & DRIVER FOR INDEXABLES: TORX PLUS DRIVE
    £27.44 Price with VAT: £32.93 Buy Surplus As Low As £17.06 Price with VAT: £20.47
    £17.06 Price with VAT: £20.47
    SANDVIK DTJNL-20-3D

    SANDVIK

    DTJNL-20-3D

    CLAMP TOOL HOLDER, 1.250IN SHANK WIDTH
    £103.08 Price with VAT: £123.70 Buy Surplus As Low As £51.91 Price with VAT: £62.29
    £51.91 Price with VAT: £62.29
    SANDVIK 570-DCLNL-32-12-L

    SANDVIK

    570-DCLNL-32-12-L

    T-MAX P TURNING TOOL 95 DEGREE CUTTING EDGE ANGLE
    £275.13 Price with VAT: £330.15 Buy Surplus As Low As £137.93 Price with VAT: £165.52
    £137.93 Price with VAT: £165.52
    SANDVIK 570-40-22-32

    SANDVIK

    570-40-22-32

    REDUCTION ADAPTOR 32X40X22MM
    £341.87 Price with VAT: £410.24 Buy Surplus As Low As £171.31 Price with VAT: £205.57
    £171.31 Price with VAT: £205.57
    SANDVIK 174.3-851M

    SANDVIK

    174.3-851M

    SHIM T-MAX LEVER DESIGN
    £8.68 Price with VAT: £10.41 Buy Surplus As Low As £3.68 Price with VAT: £4.41
    £3.68 Price with VAT: £4.41
    SANDVIK 440-000274R1-3220

    SANDVIK

    440-000274R1-3220

    INSERT COATED CARBIDE GRADE 3220
    £27.36 Price with VAT: £32.84 Buy Surplus As Low As £13.62 Price with VAT: £16.35
    £13.62 Price with VAT: £16.35
    SANDVIK BT25-TLSR-2545A-2I4M

    SANDVIK

    BT25-TLSR-2545A-2I4M

    DISCONTINUED BY MANUFACTURER, INSERT HOLDER CLAMP TYPE, BLACK
    Buy Surplus As Low As £40.05 Price with VAT: £48.05
    £40.05 Price with VAT: £48.05
    SANDVIK 393-CG-120840

    SANDVIK

    393-CG-120840

    COLLET 8MM ID 12MM OD 40MM L
    £67.48 Price with VAT: £80.98 Buy Surplus As Low As £38.90 Price with VAT: £46.68
    £38.90 Price with VAT: £46.68
    SANDVIK TCMT-22-04-08-KR-3215

    SANDVIK

    TCMT-22-04-08-KR-3215

    TURNING INSERT PRICE PER EACH
    Buy Surplus As Low As £16.97 Price with VAT: £20.37
    £16.97 Price with VAT: £20.37
    SANDVIK N331.1A-14-50-08M-KM-3040

    SANDVIK

    N331.1A-14-50-08M-KM-3040

    DISCONTINUED BY MANUFACTURER, MILLING INSERT, PACK OF 10
    Buy Surplus As Low As £55.62 Price with VAT: £66.74
    £55.62 Price with VAT: £66.74
    SANDVIK TNEF-12-04-AN-KM-K20W

    SANDVIK

    TNEF-12-04-AN-KM-K20W

    INSERT ROUGHING FOR AUTO MILL
    £30.40 Price with VAT: £36.49 Buy Surplus As Low As £15.57 Price with VAT: £18.69
    £15.57 Price with VAT: £18.69
    SANDVIK A393.CG-12-06-40

    SANDVIK

    A393.CG-12-06-40

    COLLET 3/8INCH
    £193.46 Price with VAT: £232.16 Buy Surplus As Low As £96.47 Price with VAT: £115.77
    £96.47 Price with VAT: £115.77
    SANDVIK S-TNMU160408-PF-4015

    SANDVIK

    S-TNMU160408-PF-4015

    CARBIDE INSERT TURNING GRADE 4015
    £5.50 Price with VAT: £6.60 Buy Surplus As Low As £3.30 Price with VAT: £3.96
    £3.30 Price with VAT: £3.96
    SANDVIK RBIR43-S05F

    SANDVIK

    RBIR43-S05F

    CARBIDE INSERT HEAT RESISTANT TURNING GROOVING
    £8.68 Price with VAT: £10.41 Buy Surplus As Low As £4.74 Price with VAT: £5.69
    £4.74 Price with VAT: £5.69
    SANDVIK 142508085

    SANDVIK

    142508085

    TAP COLLET RIGID ER 25-GB.318IN
    Buy Surplus As Low As £69.58 Price with VAT: £83.49
    £69.58 Price with VAT: £83.49
    SANDVIK DCLNL-16

    SANDVIK

    DCLNL-16

    TURNIG TOOL HOLDER
    Buy Surplus As Low As £97.89 Price with VAT: £117.47
    £97.89 Price with VAT: £117.47
    SANDVIK T-282770

    SANDVIK

    T-282770

    TOOL HOLDER
    £37.82 Price with VAT: £45.38 Buy Surplus As Low As £22.99 Price with VAT: £27.59
    £22.99 Price with VAT: £27.59
    SANDVIK N30-9.3-B

    SANDVIK

    N30-9.3-B

    CLAMP FOR TURNING TOOL
    Buy Surplus As Low As £8.90 Price with VAT: £10.68
    £8.90 Price with VAT: £10.68
    SANDVIK PT-589T

    SANDVIK

    PT-589T

    SCREW 2.5MM X 4.96MM 10/PACK
    Buy Surplus As Low As £4.45 Price with VAT: £5.34
    £4.45 Price with VAT: £5.34
    SANDVIK DCLNR 16 AD

    SANDVIK

    DCLNR 16 AD

    TURNING TOOL RIGHT HAND
    £106.79 Price with VAT: £128.15 Buy Surplus As Low As £63.78 Price with VAT: £76.53
    £63.78 Price with VAT: £76.53
    SANDVIK DTFNR 12 3B

    SANDVIK

    DTFNR 12 3B

    SHANK TOOL, FOR TURNING, T-MAX P, 91 DEGREE TOOL CUTTING EDGE ANGLE (KAPR1), -1 DEGREE TOOL LEAD ANGLE (PSIR), RECTANGULAR SHANK 3/4 X 3/4 INCH, RIGHT HAND
    £140.54 Price with VAT: £168.65 Buy Surplus As Low As £83.14 Price with VAT: £99.77
    £83.14 Price with VAT: £99.77
    SANDVIK FS-316L-1-1/2-3000

    SANDVIK

    FS-316L-1-1/2-3000

    COUPLING 90DEG SOCKET WELD 1-1/2IN
    Buy Surplus As Low As £60.07 Price with VAT: £72.08
    £60.07 Price with VAT: £72.08
    SANDVIK BT25-STGCR-2532-16

    SANDVIK

    BT25-STGCR-2532-16

    DISCONTINUED BY MANUFACTURER, INSERT HOLDER, CLAMP TYPE
    Buy Surplus As Low As £44.50 Price with VAT: £53.39
    £44.50 Price with VAT: £53.39
    SANDVIK BT25-RF151.22-2545-25

    SANDVIK

    BT25-RF151.22-2545-25

    INSERT HOLDER CLAMP TYPE
    £53.39 Price with VAT: £64.07 Buy Surplus As Low As £26.70 Price with VAT: £32.04
    £26.70 Price with VAT: £32.04
    SANDVIK 764-276-515

    SANDVIK

    764-276-515

    TOOL BLANK 5-3/8 X 1/2 X 1/2INCH
    £14.68 Price with VAT: £17.62 Buy Surplus As Low As £7.30 Price with VAT: £8.76
    £7.30 Price with VAT: £8.76
    SANDVIK TCMT-16-T3 02-UF-4025

    SANDVIK

    TCMT-16-T3 02-UF-4025

    DISCONTINUED BY MANUFACTURER, TURNING INSERT, INSERT SIZE AND SHAPE: TC16T3, GRADE: 4025, P25,K20, 10/PKG
    Buy Surplus As Low As £10.38 Price with VAT: £12.46
    £10.38 Price with VAT: £12.46
    SANDVIK SBEN-12-04-ZZ-3020

    SANDVIK

    SBEN-12-04-ZZ-3020

    MILLING INSERT
    Buy Surplus As Low As £14.95 Price with VAT: £17.94
    £14.95 Price with VAT: £17.94
    Previous Next
    1 2 3 4 5 6 7 8 9 10