Product Search

    SEARCH NOW FOR ALL YOUR SANDVIK SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 351-400 of 496.
    SANDVIK 5721364

    SANDVIK

    5721364

    INDEXABLE BORING BAR: A06F-STUCR05-GR, 7 MM MIN BORE DIA, RIGHT HAND CUT, 6 MM SHANK DIA, -3 ° LEAD ANGLE, STEEL
    £235.82 Price with VAT: £282.99 Buy Surplus As Low As £141.64 Price with VAT: £169.97
    £141.64 Price with VAT: £169.97
    SANDVIK 5721579

    SANDVIK

    5721579

    INDEXABLE BORING BAR: A10K-SDXCL2-R, 0.7874" MIN BORE DIA, LEFT HAND CUT, 5/8" SHANK DIA, -27.5 ° LEAD ANGLE, STEEL
    £235.82 Price with VAT: £282.99 Buy Surplus As Low As £141.64 Price with VAT: £169.97
    £141.64 Price with VAT: £169.97
    SANDVIK 5721750

    SANDVIK

    5721750

    INDEXABLE BORING BAR: A06M-SDUPR2-E, 0.5591" MIN BORE DIA, RIGHT HAND CUT, 3/8" SHANK DIA, -3 ° LEAD ANGLE, STEEL
    £238.05 Price with VAT: £285.66 Buy Surplus As Low As £143.13 Price with VAT: £171.75
    £143.13 Price with VAT: £171.75
    SANDVIK 5721272

    SANDVIK

    5721272

    INDEXABLE BORING BAR: A08M-SDXCR2, 0.6811" MIN BORE DIA, RIGHT HAND CUT, 1/2" SHANK DIA, 27.5 ° LEAD ANGLE, STEEL
    £238.05 Price with VAT: £285.66 Buy Surplus As Low As £143.13 Price with VAT: £171.75
    £143.13 Price with VAT: £171.75
    SANDVIK 5721622

    SANDVIK

    5721622

    INDEXABLE BORING BAR: A08M-SWLPR2, 0.5984" MIN BORE DIA, RIGHT HAND CUT, 1/2" SHANK DIA, -5 ° LEAD ANGLE, STEEL
    £238.05 Price with VAT: £285.66 Buy Surplus As Low As £143.13 Price with VAT: £171.75
    £143.13 Price with VAT: £171.75
    SANDVIK 6241312

    SANDVIK

    6241312

    SCREW MACHINE LENGTH DRILL BIT: 12.00 MM (0.4724) DIA, 140 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)
    £243.98 Price with VAT: £292.78 Buy Surplus As Low As £146.83 Price with VAT: £176.20
    £146.83 Price with VAT: £176.20
    SANDVIK 5762829

    SANDVIK

    5762829

    5412.120 CLAMP FOR INDEXABLES (MOQ=1, PKG QTY=1)
    £251.40 Price with VAT: £301.68 Buy Surplus As Low As £151.28 Price with VAT: £181.54
    £151.28 Price with VAT: £181.54
    SANDVIK A8514

    SANDVIK

    A8514

    END MILL INDECABLE INSERT COOLANT BULL NOSE
    £254.96 Price with VAT: £305.95 Buy Surplus As Low As £123.91 Price with VAT: £148.69
    £123.91 Price with VAT: £148.69
    SANDVIK 5721836

    SANDVIK

    5721836

    INDEXABLE BORING BAR: A12S-SVUBR2-EB1, 1.0118" MIN BORE DIA, RIGHT HAND CUT, 3/4" SHANK DIA, -3 ° LEAD ANGLE, STEEL
    £260.30 Price with VAT: £312.35 Buy Surplus As Low As £156.47 Price with VAT: £187.77
    £156.47 Price with VAT: £187.77
    SANDVIK 5721454

    SANDVIK

    5721454

    COLLET CHUCK: ER COLLET, TAPER SHANK
    £260.30 Price with VAT: £312.35 Buy Surplus As Low As £156.47 Price with VAT: £187.77
    £156.47 Price with VAT: £187.77
    SANDVIK 5721402

    SANDVIK

    5721402

    INDEXABLE BORING BAR: A20S-SDUCR11, 25 MM MIN BORE DIA, RIGHT HAND CUT, 20 MM SHANK DIA, -3 ° LEAD ANGLE, STEEL
    £260.30 Price with VAT: £312.35 Buy Surplus As Low As £156.47 Price with VAT: £187.77
    £156.47 Price with VAT: £187.77
    SANDVIK 5723349

    SANDVIK

    5723349

    HYDRAULIC CHUCK SLEEVE: 3/8" ID, 0.7874" OD, 0.9843" HEAD DIA
    £261.04 Price with VAT: £313.24 Buy Surplus As Low As £157.22 Price with VAT: £188.66
    £157.22 Price with VAT: £188.66
    SANDVIK 5760296

    SANDVIK

    5760296

    HYDRAULIC CHUCK SLEEVE: 6 MM ID, 12 MM OD, 16 MM HEAD DIA
    £261.04 Price with VAT: £313.24 Buy Surplus As Low As £157.22 Price with VAT: £188.66
    £157.22 Price with VAT: £188.66
    SANDVIK 5722702

    SANDVIK

    5722702

    HYDRAULIC CHUCK SLEEVE: 3/16" ID, 0.4724" OD, 0.6299" HEAD DIA
    £261.04 Price with VAT: £313.24 Buy Surplus As Low As £157.22 Price with VAT: £188.66
    £157.22 Price with VAT: £188.66
    SANDVIK 5760286

    SANDVIK

    5760286

    HYDRAULIC CHUCK SLEEVE: 3 MM ID, 12 MM OD, 16 MM HEAD DIA
    £261.04 Price with VAT: £313.24 Buy Surplus As Low As £157.22 Price with VAT: £188.66
    £157.22 Price with VAT: £188.66
    SANDVIK 5722705

    SANDVIK

    5722705

    HYDRAULIC CHUCK SLEEVE: 1/4" ID, 0.4724" OD, 0.6299" HEAD DIA
    £261.04 Price with VAT: £313.24 Buy Surplus As Low As £157.22 Price with VAT: £188.66
    £157.22 Price with VAT: £188.66
    SANDVIK 5722698

    SANDVIK

    5722698

    HYDRAULIC CHUCK SLEEVE: 1/8" ID, 0.4724" OD, 0.6299" HEAD DIA
    £261.04 Price with VAT: £313.24 Buy Surplus As Low As £157.22 Price with VAT: £188.66
    £157.22 Price with VAT: £188.66
    SANDVIK 5757279

    SANDVIK

    5757279

    HYDRAULIC CHUCK SLEEVE: 8 MM ID, 31.4 MM HEAD DIA COOLANT THROUGH, 1.9685" LENGTH UNDER HEAD, STEEL
    £261.04 Price with VAT: £313.24 Buy Surplus As Low As £157.22 Price with VAT: £188.66
    £157.22 Price with VAT: £188.66
    SANDVIK 5723373

    SANDVIK

    5723373

    HYDRAULIC CHUCK SLEEVE: 7/16" ID, 0.7874" OD, 0.9843" HEAD DIA
    £261.04 Price with VAT: £313.24 Buy Surplus As Low As £157.22 Price with VAT: £188.66
    £157.22 Price with VAT: £188.66
    SANDVIK 570-DCLNL-32-12-L

    SANDVIK

    570-DCLNL-32-12-L

    T-MAX P TURNING TOOL 95 DEGREE CUTTING EDGE ANGLE
    £275.13 Price with VAT: £330.15 Buy Surplus As Low As £137.93 Price with VAT: £165.52
    £137.93 Price with VAT: £165.52
    SANDVIK 5759942

    SANDVIK

    5759942

    COLLET CHUCK: ER COLLET, MODULAR CONNECTION SHANK 3.937" PROJECTION, THROUGH COOLANT
    £278.09 Price with VAT: £333.71 Buy Surplus As Low As £166.86 Price with VAT: £200.23
    £166.86 Price with VAT: £200.23
    SANDVIK 5759941

    SANDVIK

    5759941

    COLLET CHUCK: ER COLLET, MODULAR CONNECTION SHANK 3.937" PROJECTION, THROUGH COOLANT
    £278.09 Price with VAT: £333.71 Buy Surplus As Low As £166.86 Price with VAT: £200.23
    £166.86 Price with VAT: £200.23
    SANDVIK 5723354

    SANDVIK

    5723354

    HYDRAULIC CHUCK SLEEVE: 1/2" ID, 0.9843" OD, 1.1811" HEAD DIA
    £279.58 Price with VAT: £335.49 Buy Surplus As Low As £168.34 Price with VAT: £202.01
    £168.34 Price with VAT: £202.01
    SANDVIK 5757285

    SANDVIK

    5757285

    16MM ID, 31.4MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 55MM LENGTH UNDER HEAD, THROUGH COOLANT
    £285.51 Price with VAT: £342.61 Buy Surplus As Low As £171.31 Price with VAT: £205.57
    £171.31 Price with VAT: £205.57
    SANDVIK 5759633

    SANDVIK

    5759633

    ASSEMBLY FIXTURE BODY
    £287.73 Price with VAT: £345.28 Buy Surplus As Low As £172.79 Price with VAT: £207.35
    £172.79 Price with VAT: £207.35
    SANDVIK 5722995

    SANDVIK

    5722995

    HYDRAULIC CHUCK SLEEVE: 1/8" ID, 0.7874" OD, 0.9843" HEAD DIA
    £289.96 Price with VAT: £347.95 Buy Surplus As Low As £174.27 Price with VAT: £209.13
    £174.27 Price with VAT: £209.13
    SANDVIK 5759484

    SANDVIK

    5759484

    HYDRAULIC CHUCK SLEEVE:
    £289.96 Price with VAT: £347.95 Buy Surplus As Low As £174.27 Price with VAT: £209.13
    £174.27 Price with VAT: £209.13
    SANDVIK 5760304

    SANDVIK

    5760304

    HYDRAULIC CHUCK SLEEVE: 8 MM ID, 20 MM OD, 25 MM HEAD DIA
    £289.96 Price with VAT: £347.95 Buy Surplus As Low As £174.27 Price with VAT: £209.13
    £174.27 Price with VAT: £209.13
    SANDVIK 5759527

    SANDVIK

    5759527

    HYDRAULIC CHUCK SLEEVE:
    £289.96 Price with VAT: £347.95 Buy Surplus As Low As £174.27 Price with VAT: £209.13
    £174.27 Price with VAT: £209.13
    SANDVIK 5759523

    SANDVIK

    5759523

    HYDRAULIC CHUCK SLEEVE:
    £289.96 Price with VAT: £347.95 Buy Surplus As Low As £174.27 Price with VAT: £209.13
    £174.27 Price with VAT: £209.13
    SANDVIK 5723012

    SANDVIK

    5723012

    HYDRAULIC CHUCK SLEEVE: 5/16" ID, 0.7874" OD, 0.9843" HEAD DIA
    £289.96 Price with VAT: £347.95 Buy Surplus As Low As £174.27 Price with VAT: £209.13
    £174.27 Price with VAT: £209.13
    SANDVIK 5723000

    SANDVIK

    5723000

    HYDRAULIC CHUCK SLEEVE: 3/16" ID, 0.7874" OD, 0.9843" HEAD DIA
    £289.96 Price with VAT: £347.95 Buy Surplus As Low As £174.27 Price with VAT: £209.13
    £174.27 Price with VAT: £209.13
    SANDVIK 5724508

    SANDVIK

    5724508

    HYDRAULIC CHUCK SLEEVE: 1" ID, 1.2598" OD, 1.4173" HEAD DIA
    £297.37 Price with VAT: £356.85 Buy Surplus As Low As £178.72 Price with VAT: £214.47
    £178.72 Price with VAT: £214.47
    SANDVIK 5721512

    SANDVIK

    5721512

    REPLACEABLE TIP MILLING SHANK: SERIES COROMILL 316, 6-1/2" PROJECTION, 5/8" STRAIGHT SHANK
    £312.21 Price with VAT: £374.65 Buy Surplus As Low As £187.62 Price with VAT: £225.14
    £187.62 Price with VAT: £225.14
    SANDVIK SL70-R123H05LC-HP

    SANDVIK

    SL70-R123H05LC-HP

    COROCUT® 1-2 HEAD FOR PROFILING
    ✓ IN STOCK!
    £313.44 Price with VAT: £376.13 Buy Surplus As Low As £184.07 Price with VAT: £220.88
    £184.07 Price with VAT: £220.88
    SANDVIK 5757121

    SANDVIK

    5757121

    HYDRAULIC CHUCK SLEEVE: 3/4" ID, 1-1/4" OD, 1.4882" HEAD DIA
    £314.43 Price with VAT: £377.32 Buy Surplus As Low As £189.10 Price with VAT: £226.92
    £189.10 Price with VAT: £226.92
    SANDVIK R390-050Q22-11M

    SANDVIK

    R390-050Q22-11M

    FACE MILL CUTTER SQUARE SHOULDER 50MM MM DIA
    £330.75 Price with VAT: £396.90 Buy Surplus As Low As £198.74 Price with VAT: £238.49
    £198.74 Price with VAT: £238.49
    Repair Yours £165.37 Price with VAT: £198.45
    SANDVIK RX123J020-16B-045

    SANDVIK

    RX123J020-16B-045

    PROFILING TOOLHOLDER, RIGHT HAND CUTTING DIRECTION, 45 DEGREE LEAD ANGLE, 170 MM LENGTH, 25.4 MM BACK OF BAR TO CUTTING EDGE, 48.3 MM HEAD LENGTH, SQUARE SHANK TYPE, STEEL MATERIAL
    £332.55 Price with VAT: £399.06 Buy Surplus As Low As £167.93 Price with VAT: £201.52
    £167.93 Price with VAT: £201.52
    SANDVIK 5722947

    SANDVIK

    5722947

    COLLET CHUCK
    £335.94 Price with VAT: £403.12 Buy Surplus As Low As £201.71 Price with VAT: £242.05
    £201.71 Price with VAT: £242.05
    SANDVIK 5723053

    SANDVIK

    5723053

    COLLET CHUCK: ER COLLET, 1" SHANK DIA, STRAIGHT SHANK
    £335.94 Price with VAT: £403.12 Buy Surplus As Low As £201.71 Price with VAT: £242.05
    £201.71 Price with VAT: £242.05
    SANDVIK 431-210432-R4

    SANDVIK

    431-210432-R4

    SHOULDER MILL INDEXABLE 40MM 4BLADE
    ✓ IN STOCK!
    £339.72 Price with VAT: £407.66 Buy Surplus As Low As £163.46 Price with VAT: £196.15
    £163.46 Price with VAT: £196.15
    SANDVIK 570-40-22-32

    SANDVIK

    570-40-22-32

    REDUCTION ADAPTOR 32X40X22MM
    £341.87 Price with VAT: £410.24 Buy Surplus As Low As £171.31 Price with VAT: £205.57
    £171.31 Price with VAT: £205.57
    SANDVIK 5757140

    SANDVIK

    5757140

    HYDRAULIC CHUCK SLEEVE: 1" ID, 1/2" OD, 1.7362" HEAD DIA
    £349.29 Price with VAT: £419.14 Buy Surplus As Low As £209.87 Price with VAT: £251.84
    £209.87 Price with VAT: £251.84
    SANDVIK 5757136

    SANDVIK

    5757136

    HYDRAULIC CHUCK SLEEVE: 3/4" ID, 1/2" OD, 1.7362" HEAD DIA
    £349.29 Price with VAT: £419.14 Buy Surplus As Low As £209.87 Price with VAT: £251.84
    £209.87 Price with VAT: £251.84
    SANDVIK 5722946

    SANDVIK

    5722946

    COLLET CHUCK: ER COLLET, STRAIGHT SHANK
    £370.79 Price with VAT: £444.95 Buy Surplus As Low As £222.47 Price with VAT: £266.97
    £222.47 Price with VAT: £266.97
    SANDVIK C3-391.01-32-080-A

    SANDVIK

    C3-391.01-32-080-A

    SANDVIK, C3-391.01-32-080-A, C33910132080A, EXTENSION ADAPTOR, ADAPTIVE INTERFACE MACHINE DIRECTION (ADINTMS)COROMANT CAPTO (BOLT AND SEGMENT CLAMPING) -SIZE C3, COOLANT EXIT STYLE CODE (CXS ...
    £393.04 Price with VAT: £471.65 Buy Surplus As Low As £196.52 Price with VAT: £235.82
    £196.52 Price with VAT: £235.82
    Repair Yours £186.88 Price with VAT: £224.25
    SANDVIK 344-C8-391.01S-80-150

    SANDVIK

    344-C8-391.01S-80-150

    SANDVISK, 344-C8-391.01S-80-150, 344C839101S80150, EXTENSION ADAPTOR
    £422.44 Price with VAT: £506.92 Buy Surplus As Low As £211.22 Price with VAT: £253.46
    £211.22 Price with VAT: £253.46
    Repair Yours £198.74 Price with VAT: £238.49
    SANDVIK 5762959

    SANDVIK

    5762959

    LATHE CHUCK DRAW BAR SET
    £444.95 Price with VAT: £533.94 Buy Surplus As Low As £266.97 Price with VAT: £320.36
    £266.97 Price with VAT: £320.36
    SANDVIK 6427719

    SANDVIK

    6427719

    INDEXABLE CUT-OFF BLADES; END TYPE: DOUBLE; CUTTING DIRECTION: RIGHT HAND; HAND: RIGHT HAND; BLADE HEIGHT (MM): 31.90; BLADE HEIGHT (DECIMAL INCH): 1.2560; BLADE WIDTH (DECIMAL INCH): 0.0984 ...
    £453.85 Price with VAT: £544.62 Buy Surplus As Low As £272.90 Price with VAT: £327.48
    £272.90 Price with VAT: £327.48
    SANDVIK 435-810111-L62

    SANDVIK

    435-810111-L62

    SANDVIK, 435-810111L62, 435810111L62, LATHE, TOOL HOLDER
    £456.07 Price with VAT: £547.29 Buy Surplus As Low As £228.41 Price with VAT: £274.09
    £228.41 Price with VAT: £274.09
    Previous Next
    1 2 3 4 5 6 7 8 9 10