Product Search

    SEARCH NOW FOR ALL YOUR SANDVIK SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 351-400 of 496.
    SANDVIK 5780601

    SANDVIK

    5780601

    MC CLAMP FOR INDEXABLES
    £22.25 Price with VAT: £26.70 Buy Surplus As Low As £13.35 Price with VAT: £16.02
    £13.35 Price with VAT: £16.02
    SANDVIK 5849370

    SANDVIK

    5849370

    CAP SCREW FOR INDEXABLES: TORX PLUS, M3 THREAD
    £4.73 Price with VAT: £5.67 Buy Surplus As Low As £2.84 Price with VAT: £3.40
    £2.84 Price with VAT: £3.40
    SANDVIK 5966358

    SANDVIK

    5966358

    1/4" ER25 ER COOLANT COLLET 1.3386" OAL, 1.0236" OVERALL DIAM
    £132.00 Price with VAT: £158.40 Buy Surplus As Low As £79.35 Price with VAT: £95.22
    £79.35 Price with VAT: £95.22
    SANDVIK 5966368

    SANDVIK

    5966368

    0.9646 TO 1" ER40 COOLANT COLLET 1.811" OAL
    £179.46 Price with VAT: £215.36 Buy Surplus As Low As £108.27 Price with VAT: £129.93
    £108.27 Price with VAT: £129.93
    SANDVIK 5R75-WNR

    SANDVIK

    5R75-WNR

    PIPE TITANIUM-STABILIZED AUSTENITIC SST 6.0-1.0MM
    £30.40 Price with VAT: £36.49 Buy Surplus As Low As £18.54 Price with VAT: £22.25
    £18.54 Price with VAT: £22.25
    SANDVIK 6138416

    SANDVIK

    6138416

    SHIM FOR INDEXABLES
    £39.30 Price with VAT: £47.16 Buy Surplus As Low As £23.73 Price with VAT: £28.48
    £23.73 Price with VAT: £28.48
    SANDVIK 6191592

    SANDVIK

    6191592

    TORX PLUS SCREW FOR INDEXABLES IND STD NO 5513 020-75, SERIES NOT APPLICABLE
    £10.38 Price with VAT: £12.46 Buy Surplus As Low As £6.23 Price with VAT: £7.48
    £6.23 Price with VAT: £7.48
    SANDVIK 6241312

    SANDVIK

    6241312

    SCREW MACHINE LENGTH DRILL BIT: 12.00 MM (0.4724) DIA, 140 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)
    £243.98 Price with VAT: £292.78 Buy Surplus As Low As £146.83 Price with VAT: £176.20
    £146.83 Price with VAT: £176.20
    SANDVIK 6289865

    SANDVIK

    6289865

    TORX PLUS SCREW FOR INDEXABLES 5513 020 TOOLHOLDER
    £10.38 Price with VAT: £12.46 Buy Surplus As Low As £6.23 Price with VAT: £7.48
    £6.23 Price with VAT: £7.48
    SANDVIK 6427719

    SANDVIK

    6427719

    INDEXABLE CUT-OFF BLADES; END TYPE: DOUBLE; CUTTING DIRECTION: RIGHT HAND; HAND: RIGHT HAND; BLADE HEIGHT (MM): 31.90; BLADE HEIGHT (DECIMAL INCH): 1.2560; BLADE WIDTH (DECIMAL INCH): 0.0984 ...
    £453.85 Price with VAT: £544.62 Buy Surplus As Low As £272.90 Price with VAT: £327.48
    £272.90 Price with VAT: £327.48
    SANDVIK 6734114

    SANDVIK

    6734114

    TORX PLUS SCREW FOR INDEXABLES (MOQ=:1, PKG QTY=1)
    £12.61 Price with VAT: £15.13 Buy Surplus As Low As £8.16 Price with VAT: £9.79
    £8.16 Price with VAT: £9.79
    SANDVIK 6766945

    SANDVIK

    6766945

    16MM ID X 20MM OD, 25MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 50MM LENGTH UNDER HEAD, THROUGH COOLANT
    £230.63 Price with VAT: £276.76 Buy Surplus As Low As £138.68 Price with VAT: £166.41
    £138.68 Price with VAT: £166.41
    SANDVIK 7255031

    SANDVIK

    7255031

    SHIM FOR INDEXABLES
    £17.80 Price with VAT: £21.36 Buy Surplus As Low As £11.12 Price with VAT: £13.35
    £11.12 Price with VAT: £13.35
    SANDVIK 746-315-062

    SANDVIK

    746-315-062

    TOOL BLANK 3 X 1/2 X 1/2INCH
    £10.01 Price with VAT: £12.01 Buy Surplus As Low As £4.82 Price with VAT: £5.78
    £4.82 Price with VAT: £5.78
    SANDVIK 764-276-515

    SANDVIK

    764-276-515

    TOOL BLANK 5-3/8 X 1/2 X 1/2INCH
    £14.68 Price with VAT: £17.62 Buy Surplus As Low As £7.30 Price with VAT: £8.76
    £7.30 Price with VAT: £8.76
    SANDVIK 7695-1

    SANDVIK

    7695-1

    INSERT TOOL HOLDER 6.4L
    £42.72 Price with VAT: £51.26 Buy Surplus As Low As £25.63 Price with VAT: £30.75
    £25.63 Price with VAT: £30.75
    Repair Yours Contact Us
    SANDVIK 8009469

    SANDVIK

    8009469

    INDEXABLE INSERT DRILLS; DRILL STYLE: DS20; DRILL DIAMETER (MM): 16.50; MAXIMUM DRILL DEPTH (MM): 66.47; SHANK TYPE: STRAIGHT-CYLINDRICAL; SHANK DIAMETER (MM): 20.00; CUTTING DIRECTION: RIGH ...
    £832.80 Price with VAT: £999.36 Buy Surplus As Low As £499.83 Price with VAT: £599.79
    £499.83 Price with VAT: £599.79
    SANDVIK 8009513

    SANDVIK

    8009513

    INDEXABLE INSERT DRILLS; DRILL STYLE: DS20; DRILL DIAMETER (MM): 18.50; MAXIMUM DRILL DEPTH (MM): 74.56; SHANK TYPE: STRAIGHT-CYLINDRICAL; SHANK DIAMETER (MM): 25.00; CUTTING DIRECTION: RIGH ...
    £879.52 Price with VAT: £1,055.42 Buy Surplus As Low As £528.01 Price with VAT: £633.61
    £528.01 Price with VAT: £633.61
    SANDVIK 80759069

    SANDVIK

    80759069

    ACCUMULATOR CHARGING VALVE, FOR USE WITH SANDVIK TB40 AND TB60 DRILLS
    ✓ IN STOCK!
    £118.65 Price with VAT: £142.38 Buy Surplus As Low As £64.95 Price with VAT: £77.94
    £64.95 Price with VAT: £77.94
    SANDVIK 8107455

    SANDVIK

    8107455

    MODULAR CONNECTION, 2.2441 INCH NOSE DIAMETER, 110.000 MM PROJECTION, STEEL, REPLACES 930-HA06-HD-25-110
    £1,015.23 Price with VAT: £1,218.27 Buy Surplus As Low As £609.58 Price with VAT: £731.50
    £609.58 Price with VAT: £731.50
    SANDVIK 824SP004

    SANDVIK

    824SP004

    RESISTOR CERAMIC 10OHM 10PERCENT
    Buy Surplus As Low As £11.87 Price with VAT: £14.24
    £11.87 Price with VAT: £14.24
    SANDVIK 870-2600-26-KM

    SANDVIK

    870-2600-26-KM

    SANDVIK, 870-2600-26-KM, 870260026KM, DRILL BIT,
    ✓ IN STOCK!
    Buy Surplus As Low As £29.59 Price with VAT: £35.51
    £29.59 Price with VAT: £35.51
    SANDVIK 912.0155-00

    SANDVIK

    912.0155-00

    DISCONTINUED BY MANUFACTURER, AIR FILTER CARTRIDGE, HIGH-EFFICIENCY
    ✓ IN STOCK!
    Buy Surplus As Low As £19.79 Price with VAT: £23.74
    £19.79 Price with VAT: £23.74
    SANDVIK 930-C4-S-12-080

    SANDVIK

    930-C4-S-12-080

    DISCONTINUED BY MANUFACTURER, COROMANT CAPTO TO COROCHUCK 930 CAPTO, BOLT AND SEGMENT CLAMPING, SIZE C4
    Buy Surplus As Low As £487.22 Price with VAT: £584.66
    £487.22 Price with VAT: £584.66
    SANDVIK 930-C4-S-12-080A

    SANDVIK

    930-C4-S-12-080A

    COROMANT CAPTO® TO COROCHUCK™ 930 CAPTO, BOLT AND SEGMENT CLAMPING, SIZE C4
    £812.03 Price with VAT: £974.44 Buy Surplus As Low As £487.22 Price with VAT: £584.66
    £487.22 Price with VAT: £584.66
    SANDVIK 930-HA06-HD-25-110

    SANDVIK

    930-HA06-HD-25-110

    DISCONTINUED BY MANUFACTURER, MODULAR CONNECTION, 1 AXIAL CONCENTRIC ENTRY / EXIT, 1.8902 INCH FUNCTIONAL DIAMETER, 2.4803 INCH CONNECTION DIAMETER, STEEL, REPLACED BY 8107455
    Buy Surplus As Low As £369.31 Price with VAT: £443.17
    £369.31 Price with VAT: £443.17
    SANDVIK 946194321

    SANDVIK

    946194321

    MILLING ADAPTER A.C.T.S.LBA7846 OPLB100 STALB22-RH
    £148.84 Price with VAT: £178.60 Buy Surplus As Low As £89.30 Price with VAT: £107.16
    £89.30 Price with VAT: £107.16
    Repair Yours £150.00 Price with VAT: £180.00
    SANDVIK 946231905

    SANDVIK

    946231905

    MILLING ADAPTER
    Buy Surplus As Low As £31.80 Price with VAT: £38.16
    £31.80 Price with VAT: £38.16
    Repair Yours Contact Us
    SANDVIK 946260005

    SANDVIK

    946260005

    FACE MILLING CUTTING TOOL, MILLING ADAPTER
    Buy Surplus As Low As £35.41 Price with VAT: £42.49
    £35.41 Price with VAT: £42.49
    SANDVIK 946288009

    SANDVIK

    946288009

    TOOL HOLDER DUAL TIP R/H
    Buy Surplus As Low As £34.04 Price with VAT: £40.85
    £34.04 Price with VAT: £40.85
    SANDVIK 946291285N

    SANDVIK

    946291285N

    MILLING TOOL HOLDER ADAPTER
    ✓ IN STOCK!
    £31.03 Price with VAT: £37.24 Buy Surplus As Low As £16.59 Price with VAT: £19.91
    £16.59 Price with VAT: £19.91
    Repair Yours Contact Us
    SANDVIK 946294665

    SANDVIK

    946294665

    MILLING ADAPTER
    Buy Surplus As Low As £31.80 Price with VAT: £38.16
    £31.80 Price with VAT: £38.16
    Repair Yours Contact Us
    SANDVIK 946294667

    SANDVIK

    946294667

    TOOL HOLDER FLANGED
    ✓ IN STOCK!
    £110.13 Price with VAT: £132.15 Buy Surplus As Low As £52.99 Price with VAT: £63.58
    £52.99 Price with VAT: £63.58
    SANDVIK 946294673

    SANDVIK

    946294673

    MILLING ADAPTER
    Buy Surplus As Low As £34.04 Price with VAT: £40.85
    £34.04 Price with VAT: £40.85
    Repair Yours Contact Us
    SANDVIK 946298067

    SANDVIK

    946298067

    CUTTING TOOL HOLDER FACE MILL
    £92.10 Price with VAT: £110.53 Buy Surplus As Low As £55.26 Price with VAT: £66.32
    £55.26 Price with VAT: £66.32
    SANDVIK 949211304

    SANDVIK

    949211304

    MILLING ADAPTER
    £31.37 Price with VAT: £37.64 Buy Surplus As Low As £18.82 Price with VAT: £22.59
    £18.82 Price with VAT: £22.59
    Repair Yours Contact Us
    SANDVIK 949284508

    SANDVIK

    949284508

    MILLING ADAPTER
    Buy Surplus As Low As £31.80 Price with VAT: £38.16
    £31.80 Price with VAT: £38.16
    Repair Yours Contact Us
    SANDVIK A20M-SDXCL

    SANDVIK

    A20M-SDXCL

    BORING BAR COROTURN
    ✓ IN STOCK!
    £170.72 Price with VAT: £204.86 Buy Surplus As Low As £94.58 Price with VAT: £113.50
    £94.58 Price with VAT: £113.50
    SANDVIK A20M-SDXCL-11R

    SANDVIK

    A20M-SDXCL-11R

    BORING BAR/INSERT HOLDER 120 DEGREE CUTTING
    £163.89 Price with VAT: £196.67 Buy Surplus As Low As £82.32 Price with VAT: £98.78
    £82.32 Price with VAT: £98.78
    SANDVIK A20-R825A-AA120-RA

    SANDVIK

    A20-R825A-AA120-RA

    SANDVIK, A20-R825A-AA120-RA, A20R825AAA120RA, CYLINDRICAL SHANK, 1.142IN MAX CUTTING DIAMETER
    £1,572.16 Price with VAT: £1,886.59 Buy Surplus As Low As £943.29 Price with VAT: £1,131.95
    £943.29 Price with VAT: £1,131.95
    SANDVIK A392.45277-50 02 055A

    SANDVIK

    A392.45277-50 02 055A

    DISCONTINUED BY MANUFACTURER, TOOL HOLDER, CORODRILL, ADJUSTABLE CAT50 TO ISO9766
    ✓ IN STOCK!
    Buy Surplus As Low As £346.19 Price with VAT: £415.43
    £346.19 Price with VAT: £415.43
    SANDVIK A393.CG-12-06-40

    SANDVIK

    A393.CG-12-06-40

    COLLET 3/8INCH
    £193.46 Price with VAT: £232.16 Buy Surplus As Low As £96.47 Price with VAT: £115.77
    £96.47 Price with VAT: £115.77
    SANDVIK A393.CGS-26-12-56

    SANDVIK

    A393.CGS-26-12-56

    COLLET 3/4INCH
    ✓ IN STOCK!
    Buy Surplus As Low As £114.63 Price with VAT: £137.56
    £114.63 Price with VAT: £137.56
    SANDVIK A5799

    SANDVIK

    A5799

    SHARPENING TOOL ACCESSORY
    £46.05 Price with VAT: £55.26 Buy Surplus As Low As £27.63 Price with VAT: £33.16
    £27.63 Price with VAT: £33.16
    Repair Yours Contact Us
    SANDVIK A-5804

    SANDVIK

    A-5804

    FACE MILL ADAPTER
    ✓ IN STOCK!
    Buy Surplus As Low As £87.31 Price with VAT: £104.78
    £87.31 Price with VAT: £104.78
    SANDVIK A-5808

    SANDVIK

    A-5808

    FACE MILL ADAPTER
    Buy Surplus As Low As £100.11 Price with VAT: £120.14
    £100.11 Price with VAT: £120.14
    SANDVIK A-5817

    SANDVIK

    A-5817

    SHELL MILL HUB
    £46.22 Price with VAT: £55.46 Buy Surplus As Low As £27.88 Price with VAT: £33.46
    £27.88 Price with VAT: £33.46
    Repair Yours Contact Us
    SANDVIK A-5818

    SANDVIK

    A-5818

    DISCONTINUED BY MANUFACTURER, 949211302, SHELL MILLING HEAD, INDEXABLE
    ✓ IN STOCK!
    Buy Surplus As Low As £110.98 Price with VAT: £133.17
    £110.98 Price with VAT: £133.17
    SANDVIK A-5819

    SANDVIK

    A-5819

    SHELL MILL
    £37.82 Price with VAT: £45.38 Buy Surplus As Low As £22.99 Price with VAT: £27.59
    £22.99 Price with VAT: £27.59
    Repair Yours Contact Us
    SANDVIK A-5857

    SANDVIK

    A-5857

    COLLET INT/EXH
    £1.59 Price with VAT: £1.91 Buy Surplus As Low As £0.96 Price with VAT: £1.15
    £0.96 Price with VAT: £1.15
    Repair Yours Contact Us
    Previous Next
    1 2 3 4 5 6 7 8 9 10