SEARCH NOW FOR ALL YOUR STARRETT SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
STARRETT
00109
WELDED BANDSAW BLADE: 19' 2" LONG, 0.05" THICK, 2 TO 3 TPI BI-METAL, TOOTHED EDGE, VARIABLE PITCH
£196.15
Price with VAT:
£235.39
STARRETT
00108
WELDED BANDSAW BLADE: 19' 2" LONG, 0.05" THICK, 1.4 TO 2 TPI BI-METAL, TOOTHED EDGE, VARIABLE PITCH
£197.64
Price with VAT:
£237.17
STARRETT
00098
WELDED BANDSAW BLADE: 15' 8" LONG, 0.042" THICK, 2 TO 3 TPI BI-METAL, TOOTHED EDGE, VARIABLE PITCH
£137.46
Price with VAT:
£164.95
STARRETT
00087
WELDED BANDSAW BLADE: 18' 8" LONG, 0.05" THICK, 2 TO 3 TPI BI-METAL, TOOTHED EDGE, VARIABLE PITCH
£192.44
Price with VAT:
£230.93
STARRETT
00075
WELDED BANDSAW BLADE: 15' 8" LONG, 0.042" THICK, 3 TO 4 TPI BI-METAL, TOOTHED EDGE, VARIABLE PITCH
£137.46
Price with VAT:
£164.95
STARRETT
00077
WELDED BANDSAW BLADE: 15' 4" LONG, 0.05" THICK, 3 TO 4 TPI BI-METAL, TOOTHED EDGE, VARIABLE PITCH
£158.26
Price with VAT:
£189.91
STARRETT
00070
WELDED BANDSAW BLADE: 21' 6" LONG, 1" WIDE, 0.035" THICK, 6 TPI CARBON STEEL, TOOTHED EDGE, CONSTANT PITCH
£49.04
Price with VAT:
£58.85
STARRETT
00073
WELDED BANDSAW BLADE: 15' 6" LONG, 0.025" THICK, 10 TPI CARBON STEEL, TOOTHED EDGE, CONSTANT PITCH
£23.78
Price with VAT:
£28.53
STARRETT
00063
WELDED BANDSAW BLADE: 12' LONG, 1" WIDE, 0.035" THICK, 14 TPI CARBON STEEL, TOOTHED EDGE, CONSTANT PITCH
£31.21
Price with VAT:
£37.45
STARRETT
00064
WELDED BANDSAW BLADE: 10' LONG, 1" WIDE, 0.035" THICK, 10 TPI CARBON STEEL, TOOTHED EDGE, CONSTANT PITCH
£26.75
Price with VAT:
£32.10
STARRETT
00066
WELDED BANDSAW BLADE: 10' LONG, 0.025" THICK, 10 TPI CARBON STEEL, TOOTHED EDGE, CONSTANT PITCH
£20.06
Price with VAT:
£24.07
STARRETT
00060
WELDED BANDSAW BLADE: 10' 10" LONG, 0.025" THICK, 14 TPI CARBON STEEL, TOOTHED EDGE, CONSTANT PITCH
£20.06
Price with VAT:
£24.07
STARRETT
00028
DIAL BORE GAGE: 5 TO 8" DIA, 6" PROBE DEPTH 0.0001" GRADUATION, 6" GAGE DEPTH, HARDENED TOOL STEEL
£1,098.17
Price with VAT:
£1,317.80
STARRETT
KBS1218-10
(PRICE/PK) HAND HACKSAW BLADES12" X1/2" X .025"18 TPI (10)
£23.78
Price with VAT:
£28.53
STARRETT
S770BXTCZ
MICROMETER, 6 - 10MM, 58MM GAGE DEPTH, 0.001MM RESOLUTION, FRICTION THIMBLE, IP65 ELECTRONIC INSIDE HOLE MICROMETER SET ACCURATE TO 0.004MM, 1 HEAD, 2 ANVILS, 1 SETTING RING, DATA OUTPUT, IN ...
£2,491.32
Price with VAT:
£2,989.58
STARRETT
72737
MECHANICAL OUTSIDE MICROMETER: 9 TO 10" RANGE, 0.0001" GRADUATION RATCHET THIMBLE
£316.52
Price with VAT:
£379.83
STARRETT
72705
MECHANICAL OUTSIDE MICROMETER SET: 4 PC, 20 TO 24" MEASUREMENT RATCHET STOP THIMBLE, STEEL MEASURING FACE
£1,190.30
Price with VAT:
£1,428.36
STARRETT
65641
HOLE SAW: 4-1/2" SAW DIA, 1-5/8" CUT DEPTH CARBIDE TIPPED, TOOTHED EDGE
£72.82
Price with VAT:
£87.38
STARRETT
65627
HOLE SAW: 2-3/8" SAW DIA, 1-5/8" CUT DEPTH CARBIDE TIPPED, TOOTHED EDGE
£30.46
Price with VAT:
£36.56
STARRETT
65624
HOLE SAW: 2" SAW DIA, 1-5/8" CUT DEPTH CARBIDE TIPPED, TOOTHED EDGE
£23.78
Price with VAT:
£28.53
STARRETT
65637
HOLE SAW: 4" SAW DIA, 1-5/8" CUT DEPTH CARBIDE TIPPED, TOOTHED EDGE
£53.50
Price with VAT:
£64.20
STARRETT
30656
TAPE MEASURE: 26' LONG, 1" WIDTH, YELLOW BLADE 1 MM GRADUATION, S6 GRADUATION, RED CASE
£15.60
Price with VAT:
£18.72
STARRETT
20798
ELECTRONIC CALIPER: 0.0005" RESOLUTION, IP67 0.0010" ACCURACY, STAINLESS STEEL CALIPER, STAINLESS STEEL JAWS, DATA OUTPUT
£190.95
Price with VAT:
£229.14
STARRETT
72734
MECHANICAL OUTSIDE MICROMETER: 7" RANGE, 0.0001" GRADUATION 0.000100" ACCURACY, RATCHET STOP THIMBLE
£266.74
Price with VAT:
£320.09
STARRETT
66BS
FEELER GAGE SETS, SS THICKNESS GAUGE, 31 LEAVES, .0015 -.025
£83.22
Price with VAT:
£99.86
STARRETT
63492
MECHANICAL OUTSIDE MICROMETER: 4" RANGE, 0.0001" GRADUATION 0.000100" ACCURACY, RATCHET STOP THIMBLE
£352.19
Price with VAT:
£422.62
STARRETT
57513
A2 AIR-HARDENING FLAT STOCK: 5/32" THICK, 1/2" WIDE, 18" LONG, ±0.001" THICKNESS TOLERANCE + 0.250 INCH LONG TOLERANCE, + 0.000-0.005 INCH WIDE TOLERANCE, +/- 0.001 INCH THICKNESS TOLERANCE, ...
£36.41
Price with VAT:
£43.69
STARRETT
54003
O1 OIL-HARDENING FLAT STOCK: 1/8" THICK, 1-1/4" WIDE, 18" LONG, ±0.001" THICKNESS TOLERANCE + 1/4" LONG TOLERANCE, - 0 - 0.005" WIDE TOLERANCE, +/- 0.001" THICK TOLERANCE
£36.41
Price with VAT:
£43.69
STARRETT
52943
TEST INDICATOR KIT: 11 PC, 0.03" MEASURING RANGE, 15/16" DIAL DIA, 0-15-0 DIAL READING 0.035, 0.062 & 0.12" BALL DIA, 0.001" DIAL GRADUATION
£236.28
Price with VAT:
£283.53
STARRETT
52925
TEST INDICATOR KIT: 4 PC, 0.03" MEASURING RANGE, 15/16" DIAL DIA, 0-15-0 DIAL READING 0.12" BALL DIA, 0.001" DIAL GRADUATION
£191.70
Price with VAT:
£230.04
STARRETT
52924
TEST INDICATOR HOLDER: USE WITH 711 LAST WORD DIAL TEST INDICATORS F FOR USE WITH 711 LAST WORD DIAL TEST INDICATORS
£17.83
Price with VAT:
£21.40
STARRETT
50440
PRECISION LEVEL: MACHINISTS, 0.005, 0.05" SENSITIVITY PER 10" CAST IRON, 1/64" BASE FLATNESS, 7/8" WIDE X 1-3/16" HIGH
£100.31
Price with VAT:
£120.37
STARRETT
65446
MICROMETER BATTERY, USE WITH 762 & 762M SERIES, ELECTRONIC MICROMETER HEADS
£8.25
Price with VAT:
£9.91
STARRETT
64640
CALIPER DEPTH ATTACHMENT: 1 PC, USE WITH 6, 9" & 150MM 120 & 120M SERIES DIAL CALIPERS, INCLUDES SCREW 1 PIECE, FOR USE WITH 6", 9" & 150MM 120/120M SERIES DIAL CALIPERS
£66.87
Price with VAT:
£80.25
STARRETT
64492
TEST INDICATOR CLAMP: USE WITH 650,651,196 & 196M BACK PLUNGER & UNIVERSAL DIAL INDICATORS FOR USE WITH 650, 651, 196 AND 196M BACK PLUNGER AND UNIVERSAL DIAL INDICATORS
£43.84
Price with VAT:
£52.61
STARRETT
64475
DIAL TEST INDICATORS: 0.2 MAX, 0-100, HORIZONTAL 1-11/16" DIA, WHITE DIAL, 0.001" GRADUATION
£383.39
Price with VAT:
£460.07
STARRETT
64440
CALIPER CENTERLINE ATTACHMENT: 1 PC, USE WITH 798 SERIES ELECTRONIC CALIPERS, INCLUDES CASE 1 PIECE, FOR USE WITH 798 SERIES ELECTRONIC CALIPERS
£122.60
Price with VAT:
£147.12
STARRETT
64436
INDICATOR POSITIONER & HOLDER: 150 LB PULL, FINE ADJUSTMENT, INCLUDES BASE ARTICULATED ARM, 1" BASE HEIGHT
£367.05
Price with VAT:
£440.46
STARRETT
64220
TEST INDICATOR KIT: 7 PC, 0.06" MEASURING RANGE, 1-3/8" DIAL DIA, 0-15-0 DIAL READING 0.078" BALL DIA, 0.0005" DIAL GRADUATION
£334.36
Price with VAT:
£401.23
STARRETT
64219
TEST INDICATOR KIT: 7 PC, 0.03" MEASURING RANGE, 1-3/8" DIAL DIA, 0-15-0 DIAL READING 0.078" BALL DIA, 0.0005" DIAL GRADUATION
£312.06
Price with VAT:
£374.48
STARRETT
RS 1.000 A1
RECTANGLE STEEL GAGE BLOCK: 1", GRADE 0 ACCURACY GRADE 0
£60.93
Price with VAT:
£73.11
STARRETT
92258
RECTANGLE STEEL GAGE BLOCK: 0.25", GRADE 0 ACCURACY GRADE 0
£39.38
Price with VAT:
£47.26
STARRETT
72580
50 TO 100MM, 100MM GAGE DEPTH, 0.001MM RESOLUTION, FRICTION THIMBLE, IP65 ELECTRONIC INSIDE HOLE MICROMETER SET ACCURATE TO 0.005MM, 1 HEAD, 3 ANVILS, 2 SETTING RINGS, DATA OUTPUT, INSTANT I ...
£3,888.92
Price with VAT:
£4,666.70
STARRETT
66863
DIAL DROP INDICATOR: 0 TO 1" RANGE, 0-100 DIAL READING, 0.001" GRADUATION, 2-1/4" DIAL DIA 0.1" PER REVOLUTION, LUG BACK, REVOLUTION COUNTER, INCLUDES FLAT BACK
£168.66
Price with VAT:
£202.40
STARRETT
65857
DIAL TEST INDICATORS: 0.05 MAX, 0-25-0, HORIZONTAL 1-3/8" DIA, WHITE DIAL, 0.0005" GRADUATION
£269.71
Price with VAT:
£323.66
