SEARCH NOW FOR ALL YOUR SUMITOMO SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
SUMITOMO
186PALR
GROOVING INSERT: GCMN3002GL AC425K, SOLID CARBIDE COATED, NEUTRAL, 3 MM CUTTING WIDTH, 19.05 MM MAX DEPTH, SERIES GND
£18.91
Price with VAT:
£22.70
SUMITOMO
14DW295
MILLING INSERT: ACZ330, SOLID CARBIDE COATED, 3.97 MM THICK, 0.528" WIDE
£9.08
Price with VAT:
£10.89
SUMITOMO
FCP-7RBL
FIBER CLEAVER BLADES, AUTO-ROTATING, USE WITH FC-8R / FC-7R / FC-6R / FC-6R+
£146.76
Price with VAT:
£176.12
SUMITOMO
U103394
SHIM SCREW FOR INDEXABLES: 1/4-28 THREAD 1/4-28 THREAD, FOR USE WITH SHIMS (MOQ=10, PKG QTY=1)
£4.16
Price with VAT:
£4.99
SUMITOMO
18HWW15
GROOVING INSERT: GCMN6250ML AC520U, SOLID CARBIDE COATED, NEUTRAL, 6.35 MM CUTTING WIDTH, 25.4 MM MAX DEPTH, SERIES GND
£18.16
Price with VAT:
£21.79
SUMITOMO
18HMW10
GROOVING INSERT: GCMN5187MG AC530U, SOLID CARBIDE COATED, NEUTRAL, 4.76 MM CUTTING WIDTH, 25.4 MM MAX DEPTH, SERIES GND
£18.16
Price with VAT:
£21.79
SUMITOMO
RNYMS1H-1420YA-EP-20
HYPONIC GEARMOTOR, FREQUENCY 60 HZINPUT SPEED 1750 RPMPOLES 4OUTPUT SPEED 87.5 RPMOUTPUT TORQUE 919 IN-LBSSERVICE FACTOR 1.38OVERHUNG LOAD 717 LBSHP 1.5FRAME SIZE 1420SELECTION AGMA CLASS AR ...
£1,088.63
Price with VAT:
£1,306.36
SUMITOMO
RNYM03-1220YB-30
GEAR MOTOR, HYPONIC TYPE, HOLLOW SHAFT HOUSING, 1220 FRAME SIZE, UNIVERSAL OUTPUT SHAFT, INTEGRAL GEARMOTOR INPUT, KEYED HOLLOW BORE SHAFT, 1 INCH SHAFT, 30 TO 1 GEAR RATI, 58.3 RPM, 3 PHASE ...
£547.72
Price with VAT:
£657.26
SUMITOMO
U102071
GROOVING INSERT: SG3047 EH520V, SOLID CARBIDE TIALN FINISH, NEUTRAL, 0.047" CUTTING WIDTH, 0.075" MAX DEPTH, SERIES SUMINOTCH (MOQ=10, PKG QTY=1)
£20.43
Price with VAT:
£24.51
SUMITOMO
2A00W4T
3.868" MAX DRILL DEPTH, 5XD, 3/4" DIAM, INDEXABLE INSERT DRILL DRILL STYLE WDX, TAKES 2 INSERTS, 1" SHANK DIAM, STRAIGHT SHANK
£484.93
Price with VAT:
£581.92
SUMITOMO
2G00490
CAP SCREW FOR INDEXABLES: T6, TORX DRIVE, M2 X 0.4 THREAD INSERT COMPATIBLE, SERIES SUMIDRILL
£4.99
Price with VAT:
£5.99
SUMITOMO
5VHY172
JOBBER DRILL: 6.00 MM DIA, 135 DEG POINT, SOLID CARBIDE TIALCR/TISI COATED, 100.00 MM OAL, STRAIGHT-CYLINDRICAL SHANK, SERIES MDW-HGS (MOQ=1, PKG QTY=1)
£74.90
Price with VAT:
£89.87
SUMITOMO
5V00424
JOBBER DRILL: 2.00 MM DIA, 135 DEG POINT, SOLID CARBIDE TIALCR/TISI COATED, 70.00 MM OAL, STRAIGHT-CYLINDRICAL SHANK, SERIES MDW-HGS (MOQ=1, PKG QTY=1)
£74.90
Price with VAT:
£89.87
SUMITOMO
2G00471
COOLANT LOCK SCREW FOR INDEXABLES: T15 TORX, M3.5 THREAD (MOQ=10, PKG QTY=1)
£4.99
Price with VAT:
£5.99
SUMITOMO
RNYMS02-1120YA-25
GEAR MOTOR, SHAFT MOUNT (HOLLOW SHAFT), 25:1 RATIO, 230/1460 AT 60 HZ, 1750 INPUT RPM
£366.00
Price with VAT:
£439.20
SUMITOMO
TC-FX-F-80S
DISCONTINUED BY MANUFACTURER, INDUCTION MOTOR, 3 PHASE, 460 VOLTS, 1720 RPM
£820.85
Price with VAT:
£985.02
SUMITOMO
CHHXMS8-6145Y-35
GEAR MOTOR, TORQUE: 12200 IN/LB, RATIO: 35, MOTOR: 10.1 HP, SF: 1.0, INPUT RPM: 1750
£3,557.16
Price with VAT:
£4,268.59
SUMITOMO
186PW0X
GROOVING INSERT: GCMN5187GG AC425K, SOLID CARBIDE COATED, NEUTRAL, 4.76 MM CUTTING WIDTH, 25.4 MM MAX DEPTH, SERIES GND
£18.16
Price with VAT:
£21.79
SUMITOMO
186PW0P
GROOVING INSERT: GCMN2094GG AC425K, SOLID CARBIDE COATED, NEUTRAL, 2.36 MM CUTTING WIDTH, 19.05 MM MAX DEPTH, SERIES GND
£15.13
Price with VAT:
£18.16
SUMITOMO
186PALL
GROOVING INSERT: GCMN3002GG AC425K, SOLID CARBIDE COATED, NEUTRAL, 3 MM CUTTING WIDTH, 19.05 MM MAX DEPTH, SERIES GND
£18.91
Price with VAT:
£22.70
SUMITOMO
HF3202-2A2-W
DISCONTINUED BY MANUFACTURER, DRIVE, ADJUSTABLE FREQUENCY, 3 HP, 2.2 KW, 11.0 CURRENT, 3 PH
£453.91
Price with VAT:
£544.69
SUMITOMO
CHHXMS3-6130Y-R1-15
DISCONTINUED BY MANUFACTURER, REDUCER, CYCLO 6000, 1750RPM, INPUT HP: 4.98, 35 RATIO
£4,357.56
Price with VAT:
£5,229.07
SUMITOMO
CHHMS8-6145YB-B-25
MOTOR & GEARBOX ASSEMBLY, 3 PHASE INDUCTION MOTOTR, 7.5 HP, 230 / 460 V, 50/60 HZ, 18.2 / 9.08 AMP, 1710 RPM, PA228114
£2,639.50
Price with VAT:
£3,167.40
SUMITOMO
2G00171
INSERT SCREW FOR INDEXABLES: T7, TORX DRIVE, M2.2 THREAD FOR USE WITH INSERTS
£4.99
Price with VAT:
£5.99
SUMITOMO
2G00066
CAP SCREW FOR INDEXABLES: 8IP, TORX PLUS DRIVE, M2.2 THREAD FOR USE WITH INSERTS
£4.99
Price with VAT:
£5.99
SUMITOMO
2A00W26
2.179" MAX DRILL DEPTH, 3XD, 11/16" DIAM, INDEXABLE INSERT DRILL DRILL STYLE WDX, TAKES 2 INSERTS, 1" SHANK DIAM, STRAIGHT SHANK
£361.62
Price with VAT:
£433.94
SUMITOMO
1AHB024
INDEXABLE DRILL INSERT: WDXT07H ACP300, SOLID CARBIDE COATED, 0.2953" INSCRIBED CIRCLE, 0.1378" THICK, 0.0236" CORNER RADIUS, PARALLELOGRAM
£9.83
Price with VAT:
£11.80
SUMITOMO
1AHB022
INDEXABLE DRILL INSERT: WDXT09G ACP300, SOLID CARBIDE COATED, 0.378" INSCRIBED CIRCLE, 0.1575" THICK, 0.0315" CORNER RADIUS, PARALLELOGRAM
£11.35
Price with VAT:
£13.62
SUMITOMO
1AHD072
INDEXABLE DRILL INSERT: WDXT15H ACK300, SOLID CARBIDE COATED, 15 MM INSCRIBED CIRCLE, 0.2362" THICK, 0.0472" CORNER RADIUS, PARALLELOGRAM
£13.62
Price with VAT:
£16.34
SUMITOMO
1AHD022
INDEXABLE DRILL INSERT: WDXT09G ACK300, SOLID CARBIDE COATED, 0.378" INSCRIBED CIRCLE, 0.1575" THICK, 0.0315" CORNER RADIUS, PARALLELOGRAM
£11.35
Price with VAT:
£13.62
SUMITOMO
1AHB023
INDEXABLE DRILL INSERT: WDXT06H ACP300, SOLID CARBIDE COATED, 6 MM INSCRIBED CIRCLE, 0.1181" THICK, 0.0236" CORNER RADIUS, PARALLELOGRAM
£9.08
Price with VAT:
£10.89
SUMITOMO
1AHB025
INDEXABLE DRILL INSERT: WDXT9H ACP300, SOLID CARBIDE COATED, 9 MM INSCRIBED CIRCLE, 0.1575" THICK, 0.0315" CORNER RADIUS, PARALLELOGRAM
£11.35
Price with VAT:
£13.62
SUMITOMO
18HMW0T
GROOVING INSERT: GCMN3125ML AC530U, SOLID CARBIDE COATED, NEUTRAL, 3.18 MM CUTTING WIDTH, 19.05 MM MAX DEPTH, SERIES GND
£15.13
Price with VAT:
£18.16
SUMITOMO
18HMW0S
GROOVING INSERT: GCMN3125GL AC530U, SOLID CARBIDE COATED, NEUTRAL, 3.18 MM CUTTING WIDTH, 19.05 MM MAX DEPTH, SERIES GND
£18.91
Price with VAT:
£22.70
SUMITOMO
18RBW0S
GROOVING INSERT: GCMN3125GL AC830P, SOLID CARBIDE COATED, NEUTRAL, 3.18 MM CUTTING WIDTH, 19.05 MM MAX DEPTH, SERIES GND
£17.40
Price with VAT:
£20.88
SUMITOMO
18RBAMJ
GROOVING INSERT: GCMN3004GG AC830P, SOLID CARBIDE COATED, NEUTRAL, 3 MM CUTTING WIDTH, 19.05 MM MAX DEPTH, SERIES GND
£15.13
Price with VAT:
£18.16
SUMITOMO
186PALQ
GROOVING INSERT: GCMN2002GL AC425K, SOLID CARBIDE COATED, NEUTRAL, 2 MM CUTTING WIDTH, 19.05 MM MAX DEPTH, SERIES GND
£18.16
Price with VAT:
£21.79
SUMITOMO
186PALM
GROOVING INSERT: GCMN4002GG AC425K, SOLID CARBIDE COATED, NEUTRAL, 4 MM CUTTING WIDTH, 25.4 MM MAX DEPTH, SERIES GND
£15.89
Price with VAT:
£19.06
SUMITOMO
U103729
JOBBER DRILL: 25/64" DIA, 135 DEG POINT, SOLID CARBIDE TIALCR/TISI COATED, 5.3543" OAL, STRAIGHT-CYLINDRICAL SHANK, SERIES MDW-HGS (MOQ=1, PKG QTY=1)
£118.02
Price with VAT:
£141.62
SUMITOMO
U103724
JOBBER DRILL: 23/64" DIA, 135 DEG POINT, SOLID CARBIDE TIALCR/TISI COATED, 5.0000" OAL, STRAIGHT-CYLINDRICAL SHANK, SERIES MDW-HGS (MOQ=1, PKG QTY=1)
£118.02
Price with VAT:
£141.62
SUMITOMO
U101406
SMDT2400MTL-C ACX70 CARBIDE REPLACEABLE TIP DRILL TIALCR/TISI FINISH, 140° INCLUDED ANGLE, 24MM DIAM, THROUGH COOLANT, SERIES SMD (MOQ=1, PKG QTY=1)
£101.37
Price with VAT:
£121.65
SUMITOMO
U101402
SMDT2050MTL-C ACX70 CARBIDE REPLACEABLE TIP DRILL TIALCR/TISI FINISH, 140° INCLUDED ANGLE, 20.5MM DIAM, THROUGH COOLANT, SERIES SMD (MOQ=1, PKG QTY=1)
£87.76
Price with VAT:
£105.31
SUMITOMO
U101336
SMDT05625MTL-C ACX70 CARBIDE REPLACEABLE TIP DRILL TIALCR/TISI FINISH, 140° INCLUDED ANGLE, 9/16" DIAM, THROUGH COOLANT, SERIES SMD (MOQ=1, PKG QTY=1)
£78.68
Price with VAT:
£94.41
SUMITOMO
5VHY217
JOBBER DRILL: 10.50 MM DIA, 135 DEG POINT, SOLID CARBIDE TIALCR/TISI COATED, 149.00 MM OAL, STRAIGHT-CYLINDRICAL SHANK, SERIES MDW-HGS (MOQ=1, PKG QTY=1)
£160.38
Price with VAT:
£192.46
SUMITOMO
5UHY170
JOBBER DRILL: 4.80 MM DIA, 135 DEG POINT, SOLID CARBIDE TIALCR/TISI COATED, 76.00 MM OAL, STRAIGHT-CYLINDRICAL SHANK, SERIES MDW-GS (MOQ=1, PKG QTY=1)
£58.25
Price with VAT:
£69.90
SUMITOMO
5UHY155
JOBBER DRILL: 3.30 MM DIA, 135 DEG POINT, SOLID CARBIDE TIALCR/TISI COATED, 60.00 MM OAL, STRAIGHT-CYLINDRICAL SHANK, SERIES MDW-GS (MOQ=1, PKG QTY=1)
£58.25
Price with VAT:
£69.90
