SEARCH NOW FOR ALL YOUR SUPERSTRUT SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
ABB THOMAS & BETTS
SUPERSTRUT
AB201GYC
FITTING, 90 DEGREE, HEIGHT 2-1/4 INCHES, BASE LENGTH 1-5/8 INCHES, WIDTH 1-5/8 INCHES, HOLE DIAMETER 9/16 INCHES, GRAY URETHANE POWDER COATED STEEL
£33.70
Price with VAT:
£40.44
ABB THOMAS & BETTS
SUPERSTRUT
H119-1/2SSC
COUPLING, STANDARD ROD, SIZE 1/2 INCH, LENGTH 1-1/4 INCHES, STAINLESS STEEL
£86.12
Price with VAT:
£103.35
ABB THOMAS & BETTS
SUPERSTRUT
H119-1/2EGC
COUPLING, STANDARD ROD, SIZE 1/2 INCH, LENGTH 1-3/4 INCHES, ELECTRO-GALVANIZED STEEL
£8.99
Price with VAT:
£10.78
ABB THOMAS & BETTS
SUPERSTRUT
U562 HDG
HDG 1/2 BEAM CLAMP RESEARCHXX RESEARCHXX
£39.57
Price with VAT:
£47.48
ABB THOMAS & BETTS
SUPERSTRUT
U5601/2EG
CLAMP, HEAVY DUTY BEAM, OPENING SIZE 1-21/32 INCH, TAPPED HOLE SIZE 5/8 INCH, MATERIAL THICKNESS 1/4 INCH, SET SCREW SIZE 1/2 X 1-1/2 INCH, DESIGN LOAD 2,650 POUNDS, ELECTRO-GALVANIZED STEEL
£35.31
Price with VAT:
£42.38
ABB THOMAS & BETTS
SUPERSTRUT
U514A
CLAMP, I-BEAM, OPENING SIZE 7/8 INCH, WIDTH 1-1/4 INCH, THICKNESS 3/8 INCH, DESIGN LOAD 1,650 POUNDS, STEEL, 3/8 X 1-1/2 INCH SET SCREW INCLUDED
£50.62
Price with VAT:
£60.75
ABB THOMAS & BETTS
SUPERSTRUT
U501 PLATE ONLY EG
BEAM CLAMPS FOR MOUNTING CHANNEL
£28.46
Price with VAT:
£34.15
ABB THOMAS & BETTS
SUPERSTRUT
U501 HDG
HDG U BOLT BEAM CLAMP RESEARCHXX RESEARCHXX
£28.46
Price with VAT:
£34.15
ABB THOMAS & BETTS
SUPERSTRUT
701-1-12
1-1/2" PIPE, 14 GAUGE" PIPE OR TUBE CLAMP GOLD GALVANIZED, 1,000 LB CAPACITY
£6.74
Price with VAT:
£8.09
ABB THOMAS & BETTS
SUPERSTRUT
US562HDGC
BEAM CLAMP WITH SWING HANGER. 1/2 INCH SCREW INCLUDED. ROD SIZE 1/2 INCH. DESIGN LOAD 800 POUNDS. ZINC COATING IS APPLIED BY HOT-DIPPING AFTER FABRICATION. IS IN CONFORMANCE WITH ASTM A-123, ...
£210.72
Price with VAT:
£252.87
ABB THOMAS & BETTS
SUPERSTRUT
U570-2HDG
CLAMP, BEAM WITH SAFETY ROD, ROD SIZE 1/2 INCH, FLANGE WIDTH 7 INCHES - 17 INCHES, HOT-DIP GALVANIZED STEEL
£337.95
Price with VAT:
£405.54
ABB THOMAS & BETTS
SUPERSTRUT
U570-1HDG
CLAMP, BEAM WITH SAFETY ROD, ROD SIZE 1/2 INCH, FLANGE WIDTH 4 INCHES - 9 INCHES, HOT-DIP GALVANIZED STEEL
£200.14
Price with VAT:
£240.17
ABB THOMAS & BETTS
SUPERSTRUT
U514SS6
CLAMP, I-BEAM, WIDTH 1-1/4 INCH, OPENING 1-1/4 INCH, TYPE 316 STAINLESS STEEL
£436.22
Price with VAT:
£523.46
ABB THOMAS & BETTS
SUPERSTRUT
S256-8HDGC
BRACKET, CANTILEVER HALF-SLOT CHANNEL, LENGTH 8 INCHES, HEIGHT 3-1/2 INCHES, DESIGN LOAD 500 POUNDS, HOT-DIP GALVANIZED STEEL
£192.40
Price with VAT:
£230.88
ABB THOMAS & BETTS
SUPERSTRUT
S256-6HDGC
BRACKET, CANTILEVER HALF-SLOT CHANNEL, LENGTH 6 INCHES, HEIGHT 3-1/2 INCHES, DESIGN LOAD 1,000 POUNDS, HOT-DIP GALVANIZED STEEL
£173.78
Price with VAT:
£208.53
ABB THOMAS & BETTS
SUPERSTRUT
S251-38HDGC
BRACKET. STRUT BRACKET. BACK TO BACK CHANNEL 38-1/2 INCH LENGTH X 6-1/4 INCH, 2-HOLE PLATE. HEIGHT X 1-5/8 INCH WIDTH. DESIGN LOAD 500 POUNDS. ZINC COATING IS APPLIED BY HOT-DIPPING AFTER FA ...
£551.97
Price with VAT:
£662.37
ABB THOMAS & BETTS
TY RAP
S250PT-0
POLYETHYLENE TEREPHTHALATE (P.E.T.) BRAIDED WIRE SLEEVING, EXPANDABLE, BLACK, NOMINAL I.D. OF 6.35MM (0.25 INCHES), NOMINAL DIAMETER RANGE OF 3.18MM (0.125 INCHES) TO 9.53MM (0.375 INCHES), ...
£157.27
Price with VAT:
£188.73
ABB THOMAS & BETTS
TY RAP
S250FT-0
FLAME-RETARDANT BRAIDED WIRE SLEEVING, EXPANDABLE, BLACK WITH WHITE TRACER, NOMINAL I.D. OF 6.35MM (0.25 INCHES), NOMINAL DIAMETER RANGE OF 3.18MM (0.125 INCHES) TO 9.53MM (0.375 INCHES), 60 ...
£188.73
Price with VAT:
£226.48
ABB THOMAS & BETTS
SUPERSTRUT
S250-24HDGC
BRACKET, CANTILEVER HALF-SLOT CHANNEL, LENGTH 24 INCHES, HEIGHT 4-5/8 INCHES, DESIGN LOAD 400 POUNDS, HOT-DIP GALVANIZED STEEL
£241.63
Price with VAT:
£289.96
ABB THOMAS & BETTS
SUPERSTRUT
S250-20HDGC
BRACKET, CANTILEVER HALF-SLOT CHANNEL, LENGTH 20 INCHES, HEIGHT 4-5/8 INCHES, DESIGN LOAD 400 POUNDS, HOT-DIP GALVANIZED STEEL
£220.72
Price with VAT:
£264.87
ABB THOMAS & BETTS
SUPERSTRUT
S250-18HDGC
BRACKET, CANTILEVER HALF-SLOT CHANNEL, LENGTH 18 INCHES, HEIGHT 4-5/8 INCHES, DESIGN LOAD 550 POUNDS, HOT-DIP GALVANIZED STEEL
£208.81
Price with VAT:
£250.57
ABB THOMAS & BETTS
SUPERSTRUT
S250-14HDGC
BRACKET, CANTILEVER HALF-SLOT CHANNEL, LENGTH 14 INCHES, HEIGHT 4-5/8 INCHES, DESIGN LOAD 550 POUNDS, HOT-DIP GALVANIZED STEEL
£210.56
Price with VAT:
£252.67
ABB THOMAS & BETTS
SUPERSTRUT
SI400-3/8EGC
SPOT INSERT KIT, INCLUDES CONCRETE ANCHOR, WASHER AND BOLT, 3/8 INCH - 16 THREAD, ELECTRO-GALVANIZED. MAXIMUM RECOMMENDED LOAD 450 POUNDS. OD INSERT IS 2 X 5/8 INCH.
£40.74
Price with VAT:
£48.89
ABB THOMAS & BETTS
S249-14GY
BRACKET, CANTILEVER CHANNEL SUPPORT, BRACKET LENGTH 9 INCHES, HOLE TO HOLE 3-1/4 INCHES, CHANNEL LENGTH 14-1/2 INCHES, DESIGN LOAD 1325 POUNDS, GRAY URETHANE POWDER COATED STEEL
£327.61
Price with VAT:
£393.13
ABB THOMAS & BETTS
S203-26HDG
SUPPORT, CANTILEVER, LENGTH 26-1/2 INCHES, HEIGHT 8 INCHES, HOT-DIP GALVANIZED STEEL
£487.31
Price with VAT:
£584.77
ABB THOMAS & BETTS
SUPERSTRUT
701-556PG
STRAP, PIPE AND CONDUIT, OUTER DIAMETER OF PIPE 5.25-5.56 INCHES/121-141MM, EMT CONDUIT SIZE 5 INCHES, RIGID CONDUIT SIZE 5 INCHES, PRE-GALVANIZED STEEL
£79.85
Price with VAT:
£95.82
ABB THOMAS & BETTS
SUPERSTRUT
701-450AL
STRAP, PIPE AND CONDUIT, OUTER DIAMETER OF PIPE 4.25-4.50 INCHES/108-114MM, EMT CONDUIT SIZE 4 INCHES, RIGID CONDUIT SIZE 4 INCHES, ALUMINUM
£17.23
Price with VAT:
£20.67
ABB THOMAS & BETTS
SUPERSTRUT
701-287AL
STRAP, PIPE AND CONDUIT, OUTER DIAMETER OF PIPE 2.75-2.87 INCHES/70-73MM, EMT CONDUIT SIZE 2-1/2 INCHES, RIGID CONDUIT SIZE 2-1/2 INCHES, ALUMINUM
£12.73
Price with VAT:
£15.28
ABB THOMAS & BETTS
SUPERSTRUT
701-225AL
STRAP, PIPE AND CONDUIT, OUTER DIAMETER OF PIPE 2.10-2.25 INCHES/53-57.5MM, EMT CONDUIT SIZE 2 INCHES, ALUMINUM
£11.23
Price with VAT:
£13.48
ABB THOMAS & BETTS
SUPERSTRUT
701-204AL
STRAP, PIPE AND CONDUIT, OUTER DIAMETER OF PIPE 1.93-2.04 INCHES/49-52MM, ALUMINUM
£11.23
Price with VAT:
£13.48
ABB THOMAS & BETTS
SUPERSTRUT
701-167AL
STRAP, PIPE AND CONDUIT, OUTER DIAMETER OF PIPE 1.54-1.67 INCHES/39-42.5MM, RIGID CONDUIT SIZE 1-1/4 INCH, ALUMINUM
£8.24
Price with VAT:
£9.89
ABB THOMAS & BETTS
SUPERSTRUT
701-153AL
STRAP, PIPE AND CONDUIT, OUTER DIAMETER OF PIPE 1.41-1.53 INCHES/36-39MM, EMT CONDUIT SIZE 1-1/4 INCH, ALUMINUM
£10.49
Price with VAT:
£12.58
ABB THOMAS & BETTS
SUPERSTRUT
BR1600P10PGC
B RIB CHANNEL 16 GA. PUNCHED PRE-GA
£13.48
Price with VAT:
£16.18
ABB THOMAS & BETTS
SUPERSTRUT
A805EG
END CAP, KNOCKOUT SIZE 1/2 INCH, ELECTRO-GALVANIZED STEEL, FOR USE WITH A-1200 AND A-1400 SERIES CHANNEL, FURNISHED WITH 1/4 INCH X 5/8 INCH FLAT HEAD
£168.90
Price with VAT:
£202.68
ABB THOMAS & BETTS
SUPERSTRUT
A1202B10HDGC
CHANNEL, 12 GAUGE, 1-5/8 INCH X 1-5/8 INCH, LENGTH 10 FEET, HOT-DIP GALVANIZED STEEL, OPPOSITE SIDE TO SIDE COMBINATION
£113.01
Price with VAT:
£135.61
ABB THOMAS & BETTS
SUPERSTRUT
A1200SW10PGC
CHANNEL, 12 GAUGE, 1-5/8 INCH X 1-5/8 INCH, LENGTH 10 FEET, WIDER SLOTTED PRE-GALVANIZED STEEL WITH 9/16 INCH X 3 INCH SLOTS ON 4 INCH CENTERS
£30.71
Price with VAT:
£36.85
ABB THOMAS & BETTS
SUPERSTRUT
ZAB219EG
PRICE / EA, MINBUY(25); SS ZAB219EG FLAT CORNER BRACKET,3 H
£5.72
Price with VAT:
£6.86
ABB THOMAS & BETTS
SUPERSTRUT
ZAB219-10
THREE HOLE STEEL CORNER PLATE WITH GOLDGALV FINISH
£17.97
Price with VAT:
£21.57
ABB THOMAS & BETTS
SUPERSTRUT
ZAB214
BRACKET, RIGHT FACING 90 DEGREE UNIVERSAL SHELF, LENGTH 3-1/2 INCHES, HEIGHT 4-1/8 INCHES, WIDTH 1-5/8 INCH, HOLE SIZE 9/16 INCH, STEEL
£67.35
Price with VAT:
£80.81
ABB THOMAS & BETTS
S250-26HDGC
CANTILEVER BRACKET. STRUT BRACKET. CHANNEL 26-1/2 INCH LENGTH X 4-5/8 INCH, 2-HOLE PLATE. HEIGHT X 1-5/8 INCH WIDTH. DESIGN LOAD 400 POUNDS. ZINC COATING IS APPLIED BY HOT-DIPPING AFTER FABR ...
£253.86
Price with VAT:
£304.64
ABB THOMAS & BETTS
SUPERSTRUT
S249-8HDG
BRACKET, CANTILEVER CHANNEL SUPPORT, BRACKET LENGTH 8 INCHES, HOLE TO HOLE 3-1/4 INCHES, CHANNEL LENGTH 8-1/2 INCHES, DESIGN LOAD 1600 POUNDS, HOT-DIP GALVANIZED STEEL
£272.08
Price with VAT:
£326.50
ABB THOMAS & BETTS
SUPERSTRUT
S249-38HDG
BRACKET, CANTILEVER CHANNEL SUPPORT, BRACKET LENGTH 11-1/2 INCHES, HOLE TO HOLE 3-1/4 INCHES, CHANNEL LENGTH 38-1/2 INCHES, DESIGN LOAD 600 POUNDS, HOT-DIP GALVANIZED STEEL
£459.98
Price with VAT:
£551.98
ABB THOMAS & BETTS
SUPERSTRUT
S248HDGC
BRACKET, BACK TO BACK CHANNEL SUPPORT, HEIGHT 7-1/2 INCHES, LENGTH 4-3/4 INCHES, WIDTH 1-5/8 INCHES, HOT-DIP GALVANIZED STEEL, FOR USE WITH A1200 AND A1400 SERIES CHANNEL
£199.22
Price with VAT:
£239.06
ABB THOMAS & BETTS
SUPERSTRUT
S247GY
BRACKET, CHANNEL SUPPORT, HEIGHT 5-7/8 INCHES, LENGTH 4-3/4 INCHES, WIDTH 1-5/8 INCHES, GRAY EPOXY COATED STEEL, FOR USE WITH A1200, A1400, B1202, AND B1402 SERIES CHANNEL
£253.60
Price with VAT:
£304.32
