Product Search

    SEARCH NOW FOR ALL YOUR SYSTOR SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Filter Results
    Results 1-50 of 113.
    SYSTOR SYS-CFD-7

    SYSTOR

    SYS-CFD-7

    MEMORY CARD DUPLICATOR, DRIVE COPIER, 2GB/MIN, 115V/230V, COMPACT FLASH, 4 BUTTONS, 256MB DDR3, 15~90% OPERATING HUMIDITY, 7 TARGETS
    £898.75 Price with VAT: £1,078.49 Buy Surplus As Low As £539.40 Price with VAT: £647.28
    £539.40 Price with VAT: £647.28
    Repair Yours £447.86 Price with VAT: £537.43
    SYSTOR SYS-CFAST-1

    SYSTOR

    SYS-CFAST-1

    DRIVE COPIER, MEMORY CARD DUPLICATOR, 60MB/SEC, 1 TO 1, 265MB
    £616.94 Price with VAT: £740.33 Buy Surplus As Low As £369.72 Price with VAT: £443.66
    £369.72 Price with VAT: £443.66
    Repair Yours £324.27 Price with VAT: £389.12
    KYOCERA 39800

    KYOCERA

    SGS TOOL

    39800

    SQUARE END MILLS; MILL DIAMETER (MM): 6.35 ; MILL DIAMETER (DECIMAL INCH): 0.2500 ; MILL DIAMETER (INCH): 1/4 ; NUMBER OF FLUTES: 4 ; END MILL MATERIAL: SOLID CARBIDE ; LENGTH OF CUT (DECIMA ...
    £69.60 Price with VAT: £83.52 Buy Surplus As Low As £42.37 Price with VAT: £50.84
    £42.37 Price with VAT: £50.84
    KYOCERA 40530

    KYOCERA

    SGS TOOL

    40530

    BALL END MILL: 4.00 MM DIA, 14.00 MM LOC, 3 FLUTE, SOLID CARBIDE (MOQ=1, PKG QTY=1)40530
    £27.99 Price with VAT: £33.59 Buy Surplus As Low As £17.40 Price with VAT: £20.88
    £17.40 Price with VAT: £20.88
    KYOCERA 37213

    KYOCERA

    SGS TOOL

    37213

    CORNER RADIUS END MILL: 3/4" DIA, 1-1/2" LOC, 0.12" RADIUS, 5 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)37213
    £378.26 Price with VAT: £453.91 Buy Surplus As Low As £226.96 Price with VAT: £272.35
    £226.96 Price with VAT: £272.35
    KYOCERA 35604

    KYOCERA

    SGS TOOL

    35604

    CORNER RADIUS END MILL: 1/2" DIA, 1" LOC, 0.015" RADIUS, 3 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)35604
    £99.86 Price with VAT: £119.83 Buy Surplus As Low As £60.52 Price with VAT: £72.63
    £60.52 Price with VAT: £72.63
    KYOCERA 35103

    KYOCERA

    SGS TOOL

    35103

    SQUARE END MILL: 5/8'' DIA, 1-5/8'' LOC, 5/8'' SHANK DIA, 3-1/2'' OAL, 6 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)35103
    £192.91 Price with VAT: £231.50 Buy Surplus As Low As £115.75 Price with VAT: £138.90
    £115.75 Price with VAT: £138.90
    KYOCERA 31258

    KYOCERA

    SGS TOOL

    31258

    SQUARE END MILL: 5/16'' DIA, 1/2'' LOC, 5/16'' SHANK DIA, 2'' OAL, 4 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)31258
    £40.10 Price with VAT: £48.11 Buy Surplus As Low As £24.21 Price with VAT: £29.05
    £24.21 Price with VAT: £29.05
    KYOCERA 07442

    KYOCERA

    SGS TOOL

    07442

    MICRO DRILL BIT: 0.0264" DIA, 130 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)07442
    £13.62 Price with VAT: £16.34 Buy Surplus As Low As £8.32 Price with VAT: £9.99
    £8.32 Price with VAT: £9.99
    KYOCERA 63741

    KYOCERA

    SGS TOOL

    63741

    SCREW MACHINE LENGTH DRILL BIT: 3.10 MM (0.1220) DIA, 145 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)63741
    £132.39 Price with VAT: £158.87 Buy Surplus As Low As £79.43 Price with VAT: £95.32
    £79.43 Price with VAT: £95.32
    KYOCERA 61078

    KYOCERA

    SGS TOOL

    61078

    JOBBER LENGTH DRILL BIT: 4.30 MM (0.1693) DIA, 118 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)61078
    £44.63 Price with VAT: £53.56 Buy Surplus As Low As £27.23 Price with VAT: £32.68
    £27.23 Price with VAT: £32.68
    KYOCERA 61068

    KYOCERA

    SGS TOOL

    61068

    JOBBER LENGTH DRILL BIT: 3.10 MM (0.1220) DIA, 118 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)61068
    £34.80 Price with VAT: £41.76 Buy Surplus As Low As £21.18 Price with VAT: £25.42
    £21.18 Price with VAT: £25.42
    KYOCERA 58823

    KYOCERA

    SGS TOOL

    58823

    SCREW MACHINE LENGTH DRILL BIT: 1/4" (0.2500) DIA, 180 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)58823
    £248.90 Price with VAT: £298.67 Buy Surplus As Low As £149.79 Price with VAT: £179.75
    £149.79 Price with VAT: £179.75
    KYOCERA 36812

    KYOCERA

    SGS TOOL

    36812

    CORNER RADIUS END MILL: 1/2" DIA, 1" LOC, 0.09" RADIUS, 4 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)36812
    £150.55 Price with VAT: £180.66 Buy Surplus As Low As £90.78 Price with VAT: £108.94
    £90.78 Price with VAT: £108.94
    KYOCERA 33338

    KYOCERA

    SGS TOOL

    33338

    BALL END MILL: 1" DIA, 3" LOC, 2 FLUTE, SOLID CARBIDE (MOQ=1, PKG QTY=1)33338
    £621.10 Price with VAT: £745.32 Buy Surplus As Low As £372.96 Price with VAT: £447.56
    £372.96 Price with VAT: £447.56
    KYOCERA 31896

    KYOCERA

    SGS TOOL

    31896

    BALL END MILL: 0.5" DIA, 2" LOC, 2 FLUTE, SOLID CARBIDE (MOQ=1, PKG QTY=1)31896
    £128.61 Price with VAT: £154.33 Buy Surplus As Low As £77.17 Price with VAT: £92.60
    £77.17 Price with VAT: £92.60
    KYOCERA 31865

    KYOCERA

    SGS TOOL

    31865

    SQUARE END MILL: 7/16'' DIA, 3'' LOC, 7/16'' SHANK DIA, 6'' OAL, 4 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)31865
    £145.25 Price with VAT: £174.30 Buy Surplus As Low As £87.76 Price with VAT: £105.31
    £87.76 Price with VAT: £105.31
    KYOCERA 07516

    KYOCERA

    SGS TOOL

    07516

    MICRO DRILL BIT: 1.30 MM DIA, (0.0512"), 130 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)07516
    £13.62 Price with VAT: £16.34 Buy Surplus As Low As £8.32 Price with VAT: £9.99
    £8.32 Price with VAT: £9.99
    KYOCERA 03085

    KYOCERA

    SGS TOOL

    03085

    BALL END MILL: 0.024" DIA, 0.036" LOC, 4 FLUTE, SOLID CARBIDE (MOQ=1, PKG QTY=1)03085
    £35.56 Price with VAT: £42.67 Buy Surplus As Low As £21.94 Price with VAT: £26.33
    £21.94 Price with VAT: £26.33
    KYOCERA 30304

    KYOCERA

    SGS TOOL

    30304

    1/32" DIAM, 5/64" LOC, 2 FLUTE SOLID CARBIDE BALL END MILL UNCOATED, SINGLE END, 1-1/2" OAL, 1/8" SHANK DIAM, SPIRAL FLUTE
    £25.72 Price with VAT: £30.87 Buy Surplus As Low As £15.89 Price with VAT: £19.06
    £15.89 Price with VAT: £19.06
    KYOCERA 55028

    KYOCERA

    SGS TOOL

    55028

    JOBBER LENGTH DRILL BIT: 1/2" (0.5000) DIA, 124 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)55028
    £369.94 Price with VAT: £443.93 Buy Surplus As Low As £222.42 Price with VAT: £266.90
    £222.42 Price with VAT: £266.90
    KYOCERA 49188

    KYOCERA

    SGS TOOL

    49188

    SQUARE END MILL: 0.2756" DIA, 0.4724" LOC, 0.315" SHANK DIA, 4 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)49188
    £40.85 Price with VAT: £49.02 Buy Surplus As Low As £24.97 Price with VAT: £29.96
    £24.97 Price with VAT: £29.96
    KYOCERA 49310

    KYOCERA

    SGS TOOL

    49310

    SQUARE END MILL: 0.1575'' DIA, 0.315'' LOC, 2 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)49310
    £25.72 Price with VAT: £30.87 Buy Surplus As Low As £15.89 Price with VAT: £19.06
    £15.89 Price with VAT: £19.06
    KYOCERA 39004

    KYOCERA

    SGS TOOL

    39004

    BALL END MILL: 0.0313" DIA, 0.0781" LOC, 4 FLUTE, SOLID CARBIDE (MOQ=1, PKG QTY=1)39004
    £29.50 Price with VAT: £35.41 Buy Surplus As Low As £18.16 Price with VAT: £21.79
    £18.16 Price with VAT: £21.79
    KYOCERA 37061

    KYOCERA

    SGS TOOL

    37061

    CORNER RADIUS END MILL: 5/8" DIA, 3/4" LOC, 0.015" RADIUS, 5 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)37061
    £237.55 Price with VAT: £285.06 Buy Surplus As Low As £142.98 Price with VAT: £171.58
    £142.98 Price with VAT: £171.58
    KYOCERA 37060

    KYOCERA

    SGS TOOL

    37060

    ROUGHING END MILL: 5/8" DIA, 5 FLUTES, SINGLE END, SOLID CARBIDE (MOQ=1, PKG QTY=1)37060
    £233.01 Price with VAT: £279.61 Buy Surplus As Low As £139.96 Price with VAT: £167.95
    £139.96 Price with VAT: £167.95
    KYOCERA 31863

    KYOCERA

    SGS TOOL

    31863

    SQUARE END MILL: 5/16'' DIA, 1-5/8'' LOC, 5/16'' SHANK DIA, 4'' OAL, 4 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)31863
    £71.87 Price with VAT: £86.24 Buy Surplus As Low As £43.12 Price with VAT: £51.75
    £43.12 Price with VAT: £51.75
    KYOCERA 30171

    KYOCERA

    SGS TOOL

    30171

    SQUARE END MILL, 3/4'' DIA, 1-1/2'' LOC, 3/4'' SHANK DIA, 4'' OAL, 4 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES 130171
    £213.34 Price with VAT: £256.01 Buy Surplus As Low As £105.91 Price with VAT: £127.10
    £105.91 Price with VAT: £127.10
    KYOCERA 30107

    KYOCERA

    SGS TOOL

    30107

    SPIRAL FLUTE, 1/16", 3/16" LOC, 1/8" SHANK DIAM, 1-1/2" OAL, 4 FLUTE, SOLID CARBIDE SQUARE END MILL SINGLE END, UNCOATED, 30 HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES 13 ...
    £19.67 Price with VAT: £23.60 Buy Surplus As Low As £12.10 Price with VAT: £14.53
    £12.10 Price with VAT: £14.53
    KYOCERA 61092

    KYOCERA

    SGS TOOL

    61092

    JOBBER LENGTH DRILL BIT: 6.10 MM (0.2402) DIA, 118 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)61092
    £68.09 Price with VAT: £81.70 Buy Surplus As Low As £40.85 Price with VAT: £49.02
    £40.85 Price with VAT: £49.02
    KYOCERA 57165

    KYOCERA

    SGS TOOL

    57165

    JOBBER LENGTH DRILL BIT: #4 (0.2090) DIA, 118 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)57165
    £55.23 Price with VAT: £66.27 Buy Surplus As Low As £33.29 Price with VAT: £39.94
    £33.29 Price with VAT: £39.94
    KYOCERA 57160

    KYOCERA

    SGS TOOL

    57160

    JOBBER LENGTH DRILL BIT: #8 (0.1990) DIA, 118 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)57160
    £52.20 Price with VAT: £62.64 Buy Surplus As Low As £31.77 Price with VAT: £38.13
    £31.77 Price with VAT: £38.13
    KYOCERA 45705

    KYOCERA

    SGS TOOL

    45705

    BARREL CUTTER END MILLS; END TYPE: CIRCLE SEGMENT TAPER FORM ; MATERIAL: SOLID CARBIDE ; TAPER ANGLE PER SIDE: 20.00 ; SMALL END DIAMETER (MM): 2.50 ; SHANK DIAMETER (MM): 10.0000 ; LENGTH O ...
    £182.32 Price with VAT: £218.79 Buy Surplus As Low As £109.70 Price with VAT: £131.63
    £109.70 Price with VAT: £131.63
    KYOCERA 39886

    KYOCERA

    SGS TOOL

    39886

    SQUARE END MILLS; MILL DIAMETER (MM): 14.29 ; MILL DIAMETER (DECIMAL INCH): 0.5625 ; MILL DIAMETER (INCH): 9/16 ; NUMBER OF FLUTES: 4 ; END MILL MATERIAL: SOLID CARBIDE ; LENGTH OF CUT (DECI ...
    £307.90 Price with VAT: £369.48 Buy Surplus As Low As £185.35 Price with VAT: £222.42
    £185.35 Price with VAT: £222.42
    KYOCERA 39618

    KYOCERA

    SGS TOOL

    39618

    BALL END MILL: 0.1563" DIA, 0.3125" LOC, 4 FLUTE, SOLID CARBIDE (MOQ=1, PKG QTY=1)39618
    £46.90 Price with VAT: £56.29 Buy Surplus As Low As £28.75 Price with VAT: £34.50
    £28.75 Price with VAT: £34.50
    KYOCERA 37141

    KYOCERA

    SGS TOOL

    37141

    ROUGHING END MILL: 1" DIA, 5 FLUTES, 0.12" CORNER RADIUS, SOLID CARBIDE (MOQ=1, PKG QTY=1)37141
    £537.13 Price with VAT: £644.56 Buy Surplus As Low As £322.28 Price with VAT: £386.73
    £322.28 Price with VAT: £386.73
    KYOCERA 67618

    KYOCERA

    SGS TOOL

    67618

    SCREW MACHINE LENGTH DRILL BIT: #12 (0.1890) DIA, 124 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)67618
    £114.23 Price with VAT: £137.08 Buy Surplus As Low As £68.84 Price with VAT: £82.61
    £68.84 Price with VAT: £82.61
    KYOCERA 61086

    KYOCERA

    SGS TOOL

    61086

    JOBBER LENGTH DRILL BIT: 5.30 MM (0.2087) DIA, 118 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)61086
    £54.47 Price with VAT: £65.36 Buy Surplus As Low As £33.29 Price with VAT: £39.94
    £33.29 Price with VAT: £39.94
    KYOCERA 53215

    KYOCERA

    SGS TOOL

    53215

    JOBBER LENGTH DRILL BIT: LETTER O (0.3160) DIA, 150 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)53215
    £113.48 Price with VAT: £136.17 Buy Surplus As Low As £68.09 Price with VAT: £81.70
    £68.09 Price with VAT: £81.70
    KYOCERA 53201

    KYOCERA

    SGS TOOL

    53201

    JOBBER LENGTH DRILL BIT: LETTER A (0.2340) DIA, 150 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)53201
    £71.11 Price with VAT: £85.34 Buy Surplus As Low As £43.12 Price with VAT: £51.75
    £43.12 Price with VAT: £51.75
    KYOCERA 44611

    KYOCERA

    SGS TOOL

    44611

    SQUARE END MILL: 0.3937'' DIA, 0.4724'' LOC, 2 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)44611
    £164.92 Price with VAT: £197.91 Buy Surplus As Low As £99.10 Price with VAT: £118.92
    £99.10 Price with VAT: £118.92
    KYOCERA 38554

    KYOCERA

    SGS TOOL

    38554

    ROUGHING END MILL: 3/4" DIA, 5 FLUTES, 0.03" CORNER RADIUS, SOLID CARBIDE (MOQ=1, PKG QTY=1)38554
    £338.16 Price with VAT: £405.80 Buy Surplus As Low As £203.50 Price with VAT: £244.20
    £203.50 Price with VAT: £244.20
    KYOCERA 37030

    KYOCERA

    SGS TOOL

    37030

    ROUGHING END MILL: 1/2" DIA, 5 FLUTES, SINGLE END, SOLID CARBIDE (MOQ=1, PKG QTY=1)37030
    £128.61 Price with VAT: £154.33 Buy Surplus As Low As £77.17 Price with VAT: £92.60
    £77.17 Price with VAT: £92.60
    KYOCERA 34100

    KYOCERA

    SGS TOOL

    34100

    CORNER RADIUS END MILL: 1/2" DIA, 1" LOC, 4 MM RADIUS, 3 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)34100
    £304.88 Price with VAT: £365.85 Buy Surplus As Low As £183.08 Price with VAT: £219.69
    £183.08 Price with VAT: £219.69
    KYOCERA 30379

    KYOCERA

    SGS TOOL

    30379

    SQUARE END MILL: 3/8'' DIA, 1'' LOC, 3/8'' SHANK DIA, 2-1/2'' OAL, 4 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)30379
    £52.96 Price with VAT: £63.55 Buy Surplus As Low As £31.77 Price with VAT: £38.13
    £31.77 Price with VAT: £38.13
    KYOCERA 31429

    KYOCERA

    SGS TOOL

    31429

    SQUARE END MILL, 1/4" DIA, 1/2" LOC, 4 FLUTES, SOLID CARBIDE 2-1/2" OAL, 1/4" SHANK DIA, 30 ° HELIX, DOUBLE END, BRIGHT/UNCOATED, SERIES 1431429
    £43.88 Price with VAT: £52.65 Buy Surplus As Low As £23.69 Price with VAT: £28.42
    £23.69 Price with VAT: £28.42
    KYOCERA 69130

    KYOCERA

    SGS TOOL

    69130

    SCREW MACHINE LENGTH DRILL BIT: 4.00 MM (0.1575) DIA, 136 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)69130
    £145.25 Price with VAT: £174.30 Buy Surplus As Low As £87.76 Price with VAT: £105.31
    £87.76 Price with VAT: £105.31
    KYOCERA 53036

    KYOCERA

    SGS TOOL

    53036

    JOBBER LENGTH DRILL BIT: #36 (0.1065) DIA, 150 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)53036
    £53.71 Price with VAT: £64.46 Buy Surplus As Low As £32.53 Price with VAT: £39.04
    £32.53 Price with VAT: £39.04
    KYOCERA 51219

    KYOCERA

    SGS TOOL

    51219

    JOBBER LENGTH DRILL BIT: LETTER S (0.3480) DIA, 118 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)51219
    £120.29 Price with VAT: £144.34 Buy Surplus As Low As £72.63 Price with VAT: £87.15
    £72.63 Price with VAT: £87.15
    KYOCERA 49495

    KYOCERA

    SGS TOOL

    49495

    SQUARE END MILL: 5.00 MM DIA, 25.00 MM LOC, 3 FLUTE, SOLID CARBIDE (MOQ=1, PKG QTY=1)49495
    £48.42 Price with VAT: £58.10 Buy Surplus As Low As £29.50 Price with VAT: £35.41
    £29.50 Price with VAT: £35.41
    Next
    1 2 3