SEARCH NOW FOR ALL YOUR TEKNIC SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
TEKNIC
CPM-SDSK-3446P-RLN
SERVO MOTOR, 24-75 VDC (90 VDC MAX), 1800 RPM, SHAFT DIAMETER 0.5'', -40 +70 C,
£456.82
Price with VAT:
£548.18
TEKNIC
M-3441C-LS-16D
BRUSHLESS DC SERVO MOTOR, NEMA 34 - 3.42 IN (86.87 MM) SQ, CLASS H, 180 C, 8 POLE, SHAFT DIAMETER 0.5 IN (12.70 MM)
£432.34
Price with VAT:
£518.81
TEKNIC
TG-540-2-0-5
DISCONTINUED BY MANUFACTURER, SERVO DRIVE ACCESSORY, TRAJECTORY GENERATOR
£572.24
Price with VAT:
£686.69
TEKNIC
CPM-SCHP-3446P-ELNB
SERVO MOTOR, 1119 W, 1.50 HP, 1770 RPM, 24-75 V, 0.500 INCH SHAFT DIAMETER, 50 LBF MAX RADIAL LOAD, 10.0 LBF MAXTHRUST LOAD, IP53
✓ IN STOCK!
£406.77
Price with VAT:
£488.12
TEKNIC
CPM-MCPV-3441S-RLS
SERVO MOTOR, 75VDC, .50 SHAFT DIAMETER, SHAFT SEAL, 840 RPM, 0.47 HP
£401.46
Price with VAT:
£481.76
TEKNIC
NC-540-2-0-1
DISCONTINUED BY MANUFACTURER, CONTROLS, NETWORK CONTROLLER
£528.17
Price with VAT:
£633.80
TEKNIC
CPM-MCPV-3416P-ELN
SERVO MOTOR, NEMA 34, CLEARPATH-MCPV MODEL, 0.50 INCH / 12.70 MM SHAFT DIAMETER, ENHANCED, NO SHAFT SEAL
✓ IN STOCK!
£390.07
Price with VAT:
£468.09
TEKNIC
CPM-SCSK-3441S-RLNB
SERVO MOTOR, CLEARPATH / SCSK MODEL, NEMA 34, IP53, REGULAR, 0.53 INCH / 12.70 MM, NO SHAFT SEAL, BASIC FIRMWARE, ON-BODY / MOLEX MINI-FIT JR
£382.66
Price with VAT:
£459.19
TEKNIC
M-2348-XH
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, 8000 QUAD/REV, OMAX
£374.17
Price with VAT:
£449.00
TEKNIC
CPM-SDSK-2326P-ELN
SERVO MOTOR, CLEARPATH-SDSK, 559 W, 5000 RPM, 24-75 V, 0.375 INCH SHAFT, IP53
£364.86
Price with VAT:
£437.83
TEKNIC
M-5075-829
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, W/ENCODER, DELTA DESIGN 2100839, SST-3000-829 DRIVE
✓ IN STOCK!
£485.15
Price with VAT:
£582.18
TEKNIC
CPM-MCPV-3432D-RLN
INTEGRATED SERVO SYSTEM, 24-75 VDC (90 VDC MAX), 4000 RPM, SHAFT DIAMETER .5 IN (12.7MM), NEMA 34 - 3.42 IN (86.87 MM) SQ.
£358.77
Price with VAT:
£430.52
TEKNIC
M-2321P-QN-16D
DISCONTINUED BY MANUFACTURER, BRUSHLESS DC SERVO MOTOR, 8.5 AMP CONT, 6000 RPM, CLASS F
£355.96
Price with VAT:
£427.15
TEKNIC
CPM-SDHP-3416P-ELN
MOTOR, INTEGRATED SERVO SYSTEM, CLEARPATH, 1.23 HP, 4860 RPM, 24-75 V, 12.70 MM SHAFT DIAMETER, 50 LBF, 3.5 N-M, NEMA 34, 0-95 PERCENT AMBIENT HUMIDITY, NON-CONDENSING
£475.36
Price with VAT:
£570.43
TEKNIC
TG-540-2-0-1
DISCONTINUED BY MANUFACTURER, SERVO DRIVE ACCESSORY, TRAJECTORY GENERATOR
£474.62
Price with VAT:
£569.54
TEKNIC
M-3437-FX
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, BRUSHLESS, PERMANENT MAGNET, ROTARY MOTOR, 8000 QUAD/REV, 20-90 VDC, 7.5 A RMS, NEMA 34 FLANGE
✓ IN STOCK!
£351.28
Price with VAT:
£421.54
TEKNIC
IOC-540-2-3-4
DISCONTINUED BY MANUFACTURER, DEDICATED INPUT/OUTPUT CLUSTER, CONTROLPOINT, 10-IN, 6-OUT, ON-BOARD PROGRAMMABLE LOGIC
£314.58
Price with VAT:
£377.50
TEKNIC
IOC-540-2-1-3
DISCONTINUED BY MANUFACTURER, DEDICATED INPUT/OUTPUT CLUSTER, CONTROLPOINT, 10-IN, 6-OUT, ON-BOARD PROGRAMMABLE LOGIC
£311.46
Price with VAT:
£373.76
TEKNIC
M-3441S-LN-02D
SERVO MOTOR, HUDSON, NEMA 34, CLASS H, 0.5 INCH SHAFT DIAMETER, 16 INCH PIGTAIL LENGTH, INCREMENTAL ENCODER
£295.89
Price with VAT:
£355.07
TEKNIC
CPM-SDSK-3436D-RLN
STEPPER MOTOR, CLEARPATH-SDSK, IP53, NEMA 34, 0.9-3.6 NM MAX, 0.375 INCH DIAMETER / SHAFT, 4100 RPM, 24-75 VDC
£396.13
Price with VAT:
£475.36
TEKNIC
CPM-SDSK-3432S-RLS
SERVO MOTOR, 24-75 VDC (90 VDC MAX), 1130RPM, NEMA 34
£292.18
Price with VAT:
£350.62
TEKNIC
CPM-SCSK-2321P-ELSA
SERVO MOTOR, 24 - 75 VDC, 10 A, 145 W 0.375 SHAFT DIA, 1.7 NM PEAK TORQUE, 4000 RPM,
✓ IN STOCK!
£393.49
Price with VAT:
£472.19
TEKNIC
CPM-SDSK-2321P-EQN
MOTOR, INTEGRATED SERVO SYSTEM, CLEARPATH, 0.23 HP, 4000 RPM, 24-75 V, 6.35 MM SHAFT DIAMETER, 25 LBF, 1.7 N-M, NEMA 23, 0-95 PERCENT AMBIENT HUMIDITY, NON-CONDENSING
£289.22
Price with VAT:
£347.06
TEKNIC
CPM-SCSK-2321S-RLNB
SERVO MOTOR, CLEARPATH SERIES, 24-75 VDC BUS INPUT VOLTAGE, 98 OZ-IN CONTINUOUS TORQUE, 492 OS-IN PEAK TORQUE, 3170 RPM, 173W, 5 LBF THRUST LOAD, 25 LBF RADIAL LOAD, DUST RESISTANT, WATER SP ...
£281.06
Price with VAT:
£337.27
TEKNIC
CPM-MCVC-2346D-RLN
DC MOTOR, CLEARPATH INTEGRATED BRUSHLESS DC SERVO MOTOR, 75 VDC, 6000 RPM, PEAK POWER: 1.96 HP, SHAFT DIAMETER: 0.375 IN (9.525 MM), IP53
£281.06
Price with VAT:
£337.27
TEKNIC
ISC-1700-UCX-2-0-2
DISCONTINUED BY MANUFACTURER, SERVO CONTROLLER, 24-90 VDC, MACHINENET PORTS, SERIAL I/O PORTS
£373.42
Price with VAT:
£448.10
TEKNIC
SST-1500-XLX/F
SERVO STEPPER, DRIVE, 18 PIN CONNECTOR, 20 PIN CONNECTOR
✓ IN STOCK!
£274.72
Price with VAT:
£329.66
TEKNIC
M-2311P-QN-04K
DISCONTINUED BY MANUFACTURER, SERVO MOTO, BRUSHLESS, MAX SPEED 6000 RPM, CLASS F INSULATION, 59.6 OZ-IN, 606V/RKPM
£370.12
Price with VAT:
£444.14
TEKNIC
M-2330-XH
DISCONTINUED BY MANUFACTURER, SEROV MOTOR, BRUSHLESS, 8000 PPR QUAD ENCODER, 30 DEGREE RO
✓ IN STOCK!
£272.77
Price with VAT:
£327.32
TEKNIC
CPM-SCSK-2310-RLSA
SERVO MOTOR, CLEARPATH SERIES, 4000 RPM, 24-90 VDC INPUT RANGE, 45 OZ-IN CONTINUOUS TORQUE, 223 OZ-IN PEAK TORQUE, 4-28 VDC LOGIC INPUT, 5 LBF THRUST LOAD, 25 LBF RADIAL LOAD, DUST RESISTANT ...
£270.68
Price with VAT:
£324.81
TEKNIC
CPM-SDSK-2341S-RLN
STEPPER MOTOR, CLEARPATH-SDSK, IP53, NEMA 23, 1.2-5.8 NM MAX, 0.375 INCH DIAMETER / SHAFT, 1860 RPM, 10 AMP, 24-75 VDC
£269.19
Price with VAT:
£323.03
TEKNIC
CPM-SDSK-N0561P-RLN
CLEARPATH® INTEGRATED SERVO SYSTEM,100-240 VAC (1- OR 3-PHASE), 50/60HZ, 2820 RPM
£360.18
Price with VAT:
£432.22
TEKNIC
CPM-MCPV-3432S-RLN
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, 24-75VDC, 10A
✓ IN STOCK!
£359.34
Price with VAT:
£431.21
TEKNIC
94-02209-04
DISCONTINUED BY MANUFACTURER, BOARD, FOR DIGITAL SERVO DRIVE
£359.34
Price with VAT:
£431.21
TEKNIC
SST-1500-ACX-2-0-9
DISCONTINUED BY MANUFACTURER, SERVO DRIVE, SST, SERVOSTEPPER
✓ IN STOCK!
£356.52
Price with VAT:
£427.82
TEKNIC
M-1726-FX
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, 4000 QUAD / REV
£352.12
Price with VAT:
£422.54
TEKNIC
M-2348-FH
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, BRUSHLESS, 8000 QUAD, NEMA 23
£352.12
Price with VAT:
£422.54
TEKNIC
CPM-MCPV-2341P-RLN
SERVO MOTOR, 4000 RPM, 83 OZ-IN, 836 W, 414 OZ-IN
✓ IN STOCK!
£259.34
Price with VAT:
£311.21
TEKNIC
CPM-MCPV-3421S-ELN
MOTOR, CLEARPATH-MCPV, 1410 RPM, 4.0-28 V, 50 LBF, 0.50 INCH SHAFT, NEMA 34, IP53
£349.18
Price with VAT:
£419.02
TEKNIC
CPM-MCVC-3441S-RLS
MOTOR, INPUT 24-75 VDC (90 VDC MAX), PEAK TORQUE (@75 VDC)-532 OZ-IN (3.8 N-M), NEMA 34 - 3.42 IN (86.87 MM) SQ
£258.40
Price with VAT:
£310.09
TEKNIC
CPM-SCSK-2311S-RQNB
SERVO MOTOR, 120 W, 4000 RPM, 24-75 V, 25 LBF MAX RADIAL LOAD, 5.0 LBF MAX THRUST LOAD, 0.250 INCH SHAFT DIAMETER, IP53
✓ IN STOCK!
£257.66
Price with VAT:
£309.19
TEKNIC
CPM-SDSK-3441S-RLN
SERVO MOTOR, CLEARPATH INTEGRATED SERVO SYSTEM, 24-75 VDC (90 VDC MAX), NEMA 34 - 3.42 IN (86.87 MM) SQ., 840 RPM
£346.25
Price with VAT:
£415.50
TEKNIC
M-3441C-LN-16D
SERVO MOTOR, HUDSON, BRUSHLESS, NEMA 34 FRAME SIZE, CLASS H INSULATION, 8 POLES, 0.5 IN SHAFT DIAMETER, INCREMENTAL ENCODER
£345.26
Price with VAT:
£414.31
TEKNIC
M-3441C-LN-02D
MOTOR, 6000 RPM, 111A, CLASS F, IP50 MOTOR BODY PIGTAIL, SOURIAU TRIM TRIO, NO SHAFT SEAL, ENCODER DENSITY : 2,000 COUNTS / REV (POST-QUAD)
£344.78
Price with VAT:
£413.74
TEKNIC
CPM-SDSK-3432P-ELS
SERVO MOTOR, 24-75 VDC (90 VDC MAX), 267 W, 4.9. NM, 2380 RPM, SHAFT DIAMETER: 12.70 MM, W. MOTOR FRAME SIZE: NEMA 34 - 3.42 IN (86.87 MM) SQ., SHAFT SEAL, IP53
£344.05
Price with VAT:
£412.86
