SEARCH NOW FOR ALL YOUR TEKNIC SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
TEKNIC
M-2311P-QN-04K
DISCONTINUED BY MANUFACTURER, SERVO MOTO, BRUSHLESS, MAX SPEED 6000 RPM, CLASS F INSULATION, 59.6 OZ-IN, 606V/RKPM
£370.12
Price with VAT:
£444.14
TEKNIC
SST-1500-103
DISCONTINUED BY MANUFACTURER, SERVO MOTOR DRIVE, DELTA DESIGN, P/N 2100953
✓ IN STOCK!
£741.91
Price with VAT:
£890.29
TEKNIC
M-3432G-LN-08D
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, 10 AMP CONT, 6000 RPM, CLASS F, 25C, 197.3 OZ-IN, 16.9 V/KRPM
£783.11
Price with VAT:
£939.73
TEKNIC
CPM-MCPV-3432S-RLN
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, 24-75VDC, 10A
✓ IN STOCK!
£359.34
Price with VAT:
£431.21
TEKNIC
M-1726-FX
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, 4000 QUAD / REV
£352.12
Price with VAT:
£422.54
TEKNIC
M-3462-FH
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, 7.5A CONT, 6000 RPM, 185 OZ-IN, 19.2 V/KRPM
£740.61
Price with VAT:
£888.73
TEKNIC
M-3450-FX
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, 8000 QUAD/REV, 20-90 VDC, 7 ARMS, 30 AMP PEAK, 569 WATT, 600 OZ-IN, 1.5 OHMS
£968.32
Price with VAT:
£1,161.98
TEKNIC
M-2348-XH
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, 8000 QUAD/REV, OMAX
£374.17
Price with VAT:
£449.00
TEKNIC
M-4780-FH
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, 8000 QUAD/REV, SINGLE SHAFT
£1,779.80
Price with VAT:
£2,135.76
TEKNIC
M-2330-FX
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, BRUSHLESS, 30 AMP, 20-90 VDC, 4000 QUAD/REV
£467.51
Price with VAT:
£561.01
TEKNIC
M-2348-FH
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, BRUSHLESS, 8000 QUAD, NEMA 23
£352.12
Price with VAT:
£422.54
TEKNIC
M-3437-FX
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, BRUSHLESS, PERMANENT MAGNET, ROTARY MOTOR, 8000 QUAD/REV, 20-90 VDC, 7.5 A RMS, NEMA 34 FLANGE
✓ IN STOCK!
£351.28
Price with VAT:
£421.54
TEKNIC
M-3483-FT
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, CLASS F, BRUSHLESS, PERMANENT MAGNET, 200-400 VDC, 6.1 AMP CONTINUOUS, 6000 RPM, 23.6 V/KRPM
£1,388.64
Price with VAT:
£1,666.37
TEKNIC
M-4650-FT
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, M-6450 SERIES, BRUSHLESS, PERMANENT MAGNET, ROTARY MOTOR, (027318)
£2,571.31
Price with VAT:
£3,085.57
TEKNIC
94-00592-00
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, MULTICAM, 11.7A CONT., 6000 RMP, CLASS F, 25C, 19.5V/KRPM
£1,321.50
Price with VAT:
£1,585.80
TEKNIC
M-2348-260/H1
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, OPTION XH, 8000 QUAD/REV
£858.28
Price with VAT:
£1,029.94
TEKNIC
M-5075-829
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, W/ENCODER, DELTA DESIGN 2100839, SST-3000-829 DRIVE
✓ IN STOCK!
£485.15
Price with VAT:
£582.18
TEKNIC
TR11-C-Y-63-7.0A
DISCONTINUED BY MANUFACTURER, SUPPLEMENTARY PROTECTOR/CIRCUIT BREAKER, 7AMP, 240AC, 32/24VDC, CENTRAL NUT, 6.3 SIZE
✓ IN STOCK!
£4.38
Price with VAT:
£5.25
TEKNIC
RES-225
ENERGY DISSAPATION UNIT, SERIES CLEARPATH, REGENERATED ENERGY SHUNT, SCREW TERMINALS, BLOCK CONNECTOR, 250-7000W POWER RATING, 300VDC
✓ IN STOCK!
£110.43
Price with VAT:
£132.51
TEKNIC
CLNK-4-13
ETHERNET/IP MOTION AND I/O CONTROLLER, 20-28VDC, IP20, 13 I/O POINTS, 10BASE-T/100BASE-TX ETHERNET, 500KHZ (STEP PULSE WIDTH FIXED AT 1 MICROSECOND)
£216.35
Price with VAT:
£259.62
TEKNIC
CLCR-4-13
I/O AND MOTION CONTROLLER, 20-28VDC, IP20, 13 I/O POINTS, USB 2.0, 32 BIT FLOATING POINT ARM M4F PROCESSOR
✓ IN STOCK!
£81.50
Price with VAT:
£97.80
Repair Yours
Contact Us
TEKNIC
CPM-CABLE-M4P4P-120
I/O CABLE, 4-PIN MOLEX MINI-FIT, 4-PIN MOLEX MINI-FIT, 10 FEET
£12.73
Price with VAT:
£15.28
TEKNIC
CPM-MCPV-3432D-RLN
INTEGRATED SERVO SYSTEM, 24-75 VDC (90 VDC MAX), 4000 RPM, SHAFT DIAMETER .5 IN (12.7MM), NEMA 34 - 3.42 IN (86.87 MM) SQ.
£358.77
Price with VAT:
£430.52
TEKNIC
CPM-MCVC-3436P-RLN
INTEGRATED SERVO SYSTEM, 24-75 VDC INPUT, 1,047 OZ-IN PEAK TORQUE, 2370 RPM
£309.57
Price with VAT:
£371.48
TEKNIC
CPM-SDSK-3411D-ELN
INTEGRATED SERVO SYSTEM, NEMA 34 - 3.42 IN (86.87 MM) SQ., 24-75 VDC (90 VDC MAX),DUST & WATER SPLASH RESISTANT
£308.83
Price with VAT:
£370.60
TEKNIC
CPM-MCPV-2310S-RLS
INTEGRATED SERVO, NEMA 23, INPUT (BUS): 24-75 VDC, 4000 RPM, 45 OZ-IN TORQUE, ACHIEVABLE RESOLUTION:0.450 DEGREES,ROTOR INERTIA: 0.4 OZ-IN², LOGIC INPUT: 4.0 TO 28 VDC
✓ IN STOCK!
£137.03
Price with VAT:
£164.44
TEKNIC
CPM-SDSK-2321S-ELN
MOTOR, 0.23 HP, 3170 RPM, 24-75 V, 9.53 MM SHAFT DIAMETER, 25 LBF, NEMA 23
£292.66
Price with VAT:
£351.19
TEKNIC
CPM-MCPV-2311S-RQN
MOTOR, 24-75 VDC, 10 AMP, MCPV SERIES, 0.25 IN SHAFT DIAMETER
£277.10
Price with VAT:
£332.52
TEKNIC
CPM-MCVC-2321S-RLN
MOTOR, 3170 RPM, IP53, -40 TO +70 C, NEMA 23 - 2.33 IN (59.18 MM) SQ.
£216.35
Price with VAT:
£259.62
TEKNIC
M-3441C-LN-02D
MOTOR, 6000 RPM, 111A, CLASS F, IP50 MOTOR BODY PIGTAIL, SOURIAU TRIM TRIO, NO SHAFT SEAL, ENCODER DENSITY : 2,000 COUNTS / REV (POST-QUAD)
£344.78
Price with VAT:
£413.74
TEKNIC
CPM-SDSK-2321P-RQN
MOTOR, CLEARPATH, 173 W / 0.23 HP, 4000 RPM, 24-75 V, 1.7 NM, 25 LBF, 6.35 MM SHAFT DIAMETER, 0-95 PERCENT / NON-CONDENSING, DUST / WATER SPLASH RESISTANT
£254.13
Price with VAT:
£304.96
TEKNIC
CPM-MCVC-3441S-RLN
MOTOR, CLEARPATH, 840 RPM, 24-75 VDC, 13.0 N-M PEAK TORQUE, 12.70 MM SHAFT DIAMETER, NEMA 34
£294.88
Price with VAT:
£353.86
TEKNIC
CPM-MCPV-3421S-ELN
MOTOR, CLEARPATH-MCPV, 1410 RPM, 4.0-28 V, 50 LBF, 0.50 INCH SHAFT, NEMA 34, IP53
£349.18
Price with VAT:
£419.02
TEKNIC
CPM-SDSK-3421P-RLN
MOTOR, CLEARPATH-SDSK, 227 W, 0.30 HP, 3070 RPM, 0.50 INCH SHAFT, 50 LBF, NEMA 34, IP53
£258.95
Price with VAT:
£310.74
TEKNIC
CPM-MCVC-3441S-RLS
MOTOR, INPUT 24-75 VDC (90 VDC MAX), PEAK TORQUE (@75 VDC)-532 OZ-IN (3.8 N-M), NEMA 34 - 3.42 IN (86.87 MM) SQ
£258.40
Price with VAT:
£310.09
TEKNIC
CPM-MCVC-3441D-RLS
MOTOR, INPUT 24-75 VDC, 10 AMP, 0.5 INCH SHAFT DIAMETER, 160 OZ-IN (1.1 NM), 3150 RPM, 0.49 HP (364 WATT)
£306.00
Price with VAT:
£367.20
TEKNIC
CPM-MCVC-3421S-RLN
MOTOR, INPUT 24-75 VDC, MAX 90 VDC, PEAK TORQUE @75 VDC, 7.7 NM, 1410 RPM, ORIGIN USA
£227.46
Price with VAT:
£272.95
TEKNIC
CPM-SDSK-2321P-EQN
MOTOR, INTEGRATED SERVO SYSTEM, CLEARPATH, 0.23 HP, 4000 RPM, 24-75 V, 6.35 MM SHAFT DIAMETER, 25 LBF, 1.7 N-M, NEMA 23, 0-95 PERCENT AMBIENT HUMIDITY, NON-CONDENSING
£289.22
Price with VAT:
£347.06
TEKNIC
CPM-SDHP-3416P-ELN
MOTOR, INTEGRATED SERVO SYSTEM, CLEARPATH, 1.23 HP, 4860 RPM, 24-75 V, 12.70 MM SHAFT DIAMETER, 50 LBF, 3.5 N-M, NEMA 34, 0-95 PERCENT AMBIENT HUMIDITY, NON-CONDENSING
£475.36
Price with VAT:
£570.43
TEKNIC
CPM-MCPV-N0563P-RLS
MOTOR, MCPV MODEL, CLEARPATH SERIES, NEMA 56, 1- & 3-PHASE & 5-W, 110/208/230/380/415 VAC, 2.39-7.09 / 0.97-2.44 HP (PEAK / RMS), 1010-2560 RPM, 4652 / 1147 IN.-OZ. TORQUE (PEAK / RMS), 7-MO ...
£828.21
Price with VAT:
£993.85
TEKNIC
CPM-MCPV-2311S-RLN
MOTOR, MCPV SERIES, 24-75 VDC, 10 AMP, 0.375 IN SHAFT DIAMETER
✓ IN STOCK!
£174.72
Price with VAT:
£209.67
TEKNIC
CPM-MCPV-2321S-RQN
MOTOR, NEMA23, 90 VDC MAX, 3170 RPM MAX, 24-75 VDC
✓ IN STOCK!
£247.63
Price with VAT:
£297.16
TEKNIC
CPM-SCSK-2311S-RQNA
MOTOR, SCSK SERIES, 24-75 VDC, 0.25 IN SHAFT DIAMETER, 4000 RPM, 120 WATTS
✓ IN STOCK!
£140.83
Price with VAT:
£168.99
TEKNIC
M-2321P-LN-08D
MOTOR, SHAFT DIAMETER: 0.375 IN (9.53 MM), 8 POLE, NEMA 23, 6000 RPM
£223.22
Price with VAT:
£267.86
TEKNIC
MPC034-24-003-T
NEMA 34 POWER-OFF BRAKE, FOR USE W/ SERVOMOTORS, SPRING-APPLIED NEMA FACE MOUNT, 9.2NM CLAMP COLLAR SCREW TORQUE, 6000RPM, 20-24VDC, IP54 PROTECTION
✓ IN STOCK!
£233.73
Price with VAT:
£280.48
TEKNIC
ASU-FR510
PC BOARD, ANALOG SEND UNIT, MOLEX MINI-FIT, DC INPUT POWER: 15-30 VDC, ANALOG CONTROL SIGNALS: (0-10V OR 4-20MA)
£48.68
Price with VAT:
£58.42
Repair Yours
Contact Us
