SEARCH NOW FOR ALL YOUR TEKNIC SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
TEKNIC
CPM-SDSK-3411D-RLS
SERVO MOTOR, INTEGRATED SERVO SYSTEM, CLEARPATH SERIES, 1/2 INCH STROKE, 24/75 VDC, 10 AMPS, MOTOR FRAME SIZE: NEMA 34 - 3.42 INCHES, 220 WATTS, 4000 RPM
✓ IN STOCK!
£302.07
Price with VAT:
£362.48
TEKNIC
CPM-MCVC-3421D-RLN
SERVO MOTOR, 24-75VDC, MAX SPEED 4000 RPM, 0.5IN SHAFT DIA, 935 W PEAK, LOGIC INPUT VOLTAGE RANGE 4.0-28VDC
✓ IN STOCK!
£210.85
Price with VAT:
£253.03
TEKNIC
CPM-MCVC-3432P-RLS
SERVO MOTOR, NEMA 34 - 3.42, INPUT VOLT 24-75 VDC
£276.36
Price with VAT:
£331.63
TEKNIC
CPM-MCPV-2311S-RQN
MOTOR, 24-75 VDC, 10 AMP, MCPV SERIES, 0.25 IN SHAFT DIAMETER
£277.10
Price with VAT:
£332.52
TEKNIC
CPM-MCPV-2310S-RLS
INTEGRATED SERVO, NEMA 23, INPUT (BUS): 24-75 VDC, 4000 RPM, 45 OZ-IN TORQUE, ACHIEVABLE RESOLUTION:0.450 DEGREES,ROTOR INERTIA: 0.4 OZ-IN², LOGIC INPUT: 4.0 TO 28 VDC
✓ IN STOCK!
£137.03
Price with VAT:
£164.44
TEKNIC
CPM-SDSK-2321S-RLN
SERVO MOTOR, NO SHAFT SEAL, .375IN SHAFT DIA, ENHANCED OPTION
✓ IN STOCK!
£229.45
Price with VAT:
£275.34
TEKNIC
CPM-MCVC-2310S-RLN
SERVO MOTOR, 223OZ-IN TORQUE, 4000RPM, 24 - 90 VDC
£213.58
Price with VAT:
£256.29
TEKNIC
M-3432P-LN-20D
SERVO MOTOR,6000RPM,10AMP,CLASS F,29.2 V/KRPM,341.9 OZ-IN,FLANGED
£288.29
Price with VAT:
£345.95
TEKNIC
CPM-MCPV-2311P-RLN
SERVO MOTOR, 4000 RPM, PEAK POWER: 429 W / 0.57 HP, RMS POWER: 86W / 0.11 HP
£274.88
Price with VAT:
£329.86
TEKNIC
CPM-MCVC-2310S-RQN
SERVO MOTOR, INTEGRATED SYSTEM, NEMA 23 FRAME, 24-75VDC, 400RPM MAX
£214.96
Price with VAT:
£257.96
TEKNIC
CPM-MCVC-2331S-RLN
SERVO MOTOR, MOTOR FRAME SIZE- NEMA 23 - 2.33 IN, 24-75 VDC, PEAK TORQUE- 620 OZ-IN, CONT. (RMS) TORQUE- 124 OZ-IN, MAX SPEED- 2520 RPM, PEAK POWER- 355 W, CONT. (RMS) POWER- 206 W
✓ IN STOCK!
£114.37
Price with VAT:
£137.24
TEKNIC
CPM-MCVC-3432P-RLN
SERVO MOTOR, INTEGRATED SERVO SYSTEM, INPUT VOLTAGE 24-75 VDC, TORQUE 209 OZ-IN, MAX SPEED 2380 RPM, FRAME SIZE NEMA 34 - 3.42 IN (86.87 MM) SQ
£297.85
Price with VAT:
£357.42
TEKNIC
CPM-MCVC-3441S-RLN
MOTOR, CLEARPATH, 840 RPM, 24-75 VDC, 13.0 N-M PEAK TORQUE, 12.70 MM SHAFT DIAMETER, NEMA 34
£294.88
Price with VAT:
£353.86
TEKNIC
M-2321P-LN-08D
MOTOR, SHAFT DIAMETER: 0.375 IN (9.53 MM), 8 POLE, NEMA 23, 6000 RPM
£223.22
Price with VAT:
£267.86
TEKNIC
CPM-MCPV-2321S-RLN
SERVO MOTOR, .375 INCH SHAFT DIAMETER, NO SHAFT SEAL, 24-75VDC, 10 AMP
£285.99
Price with VAT:
£343.19
TEKNIC
CPM-SDSK-2321S-ELN
MOTOR, 0.23 HP, 3170 RPM, 24-75 V, 9.53 MM SHAFT DIAMETER, 25 LBF, NEMA 23
£292.66
Price with VAT:
£351.19
TEKNIC
CPM-MCVC-3446P-RLN
SYNCHRONOUS MOTOR, BI-DIRECTIONAL, DC, IP53
£308.10
Price with VAT:
£369.72
TEKNIC
CPM-SDSK-3411D-ELN
INTEGRATED SERVO SYSTEM, NEMA 34 - 3.42 IN (86.87 MM) SQ., 24-75 VDC (90 VDC MAX),DUST & WATER SPLASH RESISTANT
£308.83
Price with VAT:
£370.60
TEKNIC
CPM-MCVC-3436P-RLN
INTEGRATED SERVO SYSTEM, 24-75 VDC INPUT, 1,047 OZ-IN PEAK TORQUE, 2370 RPM
£309.57
Price with VAT:
£371.48
TEKNIC
CPM-MCPV-2311S-RLN
MOTOR, MCPV SERIES, 24-75 VDC, 10 AMP, 0.375 IN SHAFT DIAMETER
✓ IN STOCK!
£174.72
Price with VAT:
£209.67
TEKNIC
CPM-SDSK-3432S-RLN
SERVO MOTOR, 75VDC MAX SPEED, 0.03 DEGREES REPEATABILITY, 392 OZ-IN RMS TORQUE, 267 W PEAK POWER
£302.29
Price with VAT:
£362.75
TEKNIC
ISC-M423-KCX-5-5-D
SERVO CONTROLLER, INTEGRATED DSP-BASE, 23AMP, 24-90VDC
✓ IN STOCK!
£285.75
Price with VAT:
£342.90
TEKNIC
CPM-MCVC-3441D-RLS
MOTOR, INPUT 24-75 VDC, 10 AMP, 0.5 INCH SHAFT DIAMETER, 160 OZ-IN (1.1 NM), 3150 RPM, 0.49 HP (364 WATT)
£306.00
Price with VAT:
£367.20
TEKNIC
MPC034-24-003-T
NEMA 34 POWER-OFF BRAKE, FOR USE W/ SERVOMOTORS, SPRING-APPLIED NEMA FACE MOUNT, 9.2NM CLAMP COLLAR SCREW TORQUE, 6000RPM, 20-24VDC, IP54 PROTECTION
✓ IN STOCK!
£233.73
Price with VAT:
£280.48
TEKNIC
CPM-SDSK-3441D-RLN
CLEARPATH® INTEGRATED SERVO SYSTEM, 24-75 VDC (90 VDC MAX) , NEMA 34 - 3.42 IN (86.87 MM) SQ., 3150 RPM
£329.37
Price with VAT:
£395.24
TEKNIC
CPM-SDSK-2311S-ELN
SERVO MOTOR, CLEARPATH-SDSK, 4000 RPM, 0.16 HP, 24-75 V, 0.375 INCH SHAFT, WITHOUT SHAFT SEAL
£249.17
Price with VAT:
£299.01
TEKNIC
CPM-SDSK-3432P-ELS
SERVO MOTOR, 24-75 VDC (90 VDC MAX), 267 W, 4.9. NM, 2380 RPM, SHAFT DIAMETER: 12.70 MM, W. MOTOR FRAME SIZE: NEMA 34 - 3.42 IN (86.87 MM) SQ., SHAFT SEAL, IP53
£344.05
Price with VAT:
£412.86
TEKNIC
CPM-SCSK-2321P-ELSA
SERVO MOTOR, 24 - 75 VDC, 10 A, 145 W 0.375 SHAFT DIA, 1.7 NM PEAK TORQUE, 4000 RPM,
✓ IN STOCK!
£393.49
Price with VAT:
£472.19
TEKNIC
M-3441C-LN-02D
MOTOR, 6000 RPM, 111A, CLASS F, IP50 MOTOR BODY PIGTAIL, SOURIAU TRIM TRIO, NO SHAFT SEAL, ENCODER DENSITY : 2,000 COUNTS / REV (POST-QUAD)
£344.78
Price with VAT:
£413.74
TEKNIC
CPM-SDSK-3441S-RLN
SERVO MOTOR, CLEARPATH INTEGRATED SERVO SYSTEM, 24-75 VDC (90 VDC MAX), NEMA 34 - 3.42 IN (86.87 MM) SQ., 840 RPM
£346.25
Price with VAT:
£415.50
TEKNIC
CPM-SCSK-2311S-RQNB
SERVO MOTOR, 120 W, 4000 RPM, 24-75 V, 25 LBF MAX RADIAL LOAD, 5.0 LBF MAX THRUST LOAD, 0.250 INCH SHAFT DIAMETER, IP53
✓ IN STOCK!
£257.66
Price with VAT:
£309.19
TEKNIC
CPM-MCPV-3421S-ELN
MOTOR, CLEARPATH-MCPV, 1410 RPM, 4.0-28 V, 50 LBF, 0.50 INCH SHAFT, NEMA 34, IP53
£349.18
Price with VAT:
£419.02
TEKNIC
CPM-MCPV-3441S-RLN
SERVO MOTOR, CLEARPATH-MCPV, CONTROL POSITION, NEMA 34 - 3.42 IN, 24-75 VDC , 840 RPM, -40 TO +70 C
✓ IN STOCK!
£333.41
Price with VAT:
£400.09
TEKNIC
M-3441C-LN-16D
SERVO MOTOR, HUDSON, BRUSHLESS, NEMA 34 FRAME SIZE, CLASS H INSULATION, 8 POLES, 0.5 IN SHAFT DIAMETER, INCREMENTAL ENCODER
£345.26
Price with VAT:
£414.31
TEKNIC
M-3422C-LN-02D
STEPPER MOTOR 11.7AMP 19.5V 267.2OZ-IN 6000RPM
£243.24
Price with VAT:
£291.89
TEKNIC
CPM-SDSK-N0561P-RLN
CLEARPATH® INTEGRATED SERVO SYSTEM,100-240 VAC (1- OR 3-PHASE), 50/60HZ, 2820 RPM
£360.18
Price with VAT:
£432.22
TEKNIC
CPM-SCSK-2311S-RQNA
MOTOR, SCSK SERIES, 24-75 VDC, 0.25 IN SHAFT DIAMETER, 4000 RPM, 120 WATTS
✓ IN STOCK!
£140.83
Price with VAT:
£168.99
TEKNIC
CPM-SDSK-2341S-RLN
STEPPER MOTOR, CLEARPATH-SDSK, IP53, NEMA 23, 1.2-5.8 NM MAX, 0.375 INCH DIAMETER / SHAFT, 1860 RPM, 10 AMP, 24-75 VDC
£269.19
Price with VAT:
£323.03
TEKNIC
CPM-SCSK-2310-RLSA
SERVO MOTOR, CLEARPATH SERIES, 4000 RPM, 24-90 VDC INPUT RANGE, 45 OZ-IN CONTINUOUS TORQUE, 223 OZ-IN PEAK TORQUE, 4-28 VDC LOGIC INPUT, 5 LBF THRUST LOAD, 25 LBF RADIAL LOAD, DUST RESISTANT ...
£270.68
Price with VAT:
£324.81
TEKNIC
CPM-MCPV-2321S-RQN
MOTOR, NEMA23, 90 VDC MAX, 3170 RPM MAX, 24-75 VDC
✓ IN STOCK!
£247.63
Price with VAT:
£297.16
TEKNIC
CPM-SCSK-2321S-RLNB
SERVO MOTOR, CLEARPATH SERIES, 24-75 VDC BUS INPUT VOLTAGE, 98 OZ-IN CONTINUOUS TORQUE, 492 OS-IN PEAK TORQUE, 3170 RPM, 173W, 5 LBF THRUST LOAD, 25 LBF RADIAL LOAD, DUST RESISTANT, WATER SP ...
£281.06
Price with VAT:
£337.27
TEKNIC
CPM-MCVC-2346D-RLN
DC MOTOR, CLEARPATH INTEGRATED BRUSHLESS DC SERVO MOTOR, 75 VDC, 6000 RPM, PEAK POWER: 1.96 HP, SHAFT DIAMETER: 0.375 IN (9.525 MM), IP53
£281.06
Price with VAT:
£337.27
TEKNIC
CPM-SDSK-2321P-EQN
MOTOR, INTEGRATED SERVO SYSTEM, CLEARPATH, 0.23 HP, 4000 RPM, 24-75 V, 6.35 MM SHAFT DIAMETER, 25 LBF, 1.7 N-M, NEMA 23, 0-95 PERCENT AMBIENT HUMIDITY, NON-CONDENSING
£289.22
Price with VAT:
£347.06
TEKNIC
CPM-SDSK-3436D-RLN
STEPPER MOTOR, CLEARPATH-SDSK, IP53, NEMA 34, 0.9-3.6 NM MAX, 0.375 INCH DIAMETER / SHAFT, 4100 RPM, 24-75 VDC
£396.13
Price with VAT:
£475.36
TEKNIC
M-3441S-LN-02D
SERVO MOTOR, HUDSON, NEMA 34, CLASS H, 0.5 INCH SHAFT DIAMETER, 16 INCH PIGTAIL LENGTH, INCREMENTAL ENCODER
£295.89
Price with VAT:
£355.07
TEKNIC
CPM-MCVC-3441S-RLS
MOTOR, INPUT 24-75 VDC (90 VDC MAX), PEAK TORQUE (@75 VDC)-532 OZ-IN (3.8 N-M), NEMA 34 - 3.42 IN (86.87 MM) SQ
£258.40
Price with VAT:
£310.09
TEKNIC
CPM-MCPV-2341P-RLN
SERVO MOTOR, 4000 RPM, 83 OZ-IN, 836 W, 414 OZ-IN
✓ IN STOCK!
£259.34
Price with VAT:
£311.21
TEKNIC
CPM-SDSK-3432S-RLS
SERVO MOTOR, 24-75 VDC (90 VDC MAX), 1130RPM, NEMA 34
£292.18
Price with VAT:
£350.62
