SEARCH NOW FOR ALL YOUR TEKNIC SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
TEKNIC
EGT 18B08 AP024-SEM4L
DISCONTINUED BY MANUFACTURER, PROXIMITY SWITCH, 10-30VDC, 250MA, PRICE/EACH
£34.26
Price with VAT:
£41.12
TEKNIC
SST-E545-RCX-4-1-15
DISCONTINUED BY MANUFACTURER, PLC PROCESSOR, DC SERVO DRIVE AMPLIFIER, 24-90 VDC, 12A RMS
£746.44
Price with VAT:
£895.73
TEKNIC
CPM-MCVC-3432P-RLN
SERVO MOTOR, INTEGRATED SERVO SYSTEM, INPUT VOLTAGE 24-75 VDC, TORQUE 209 OZ-IN, MAX SPEED 2380 RPM, FRAME SIZE NEMA 34 - 3.42 IN (86.87 MM) SQ
£297.85
Price with VAT:
£357.42
TEKNIC
SST-6000-RCX-3-1-0
DISCONTINUED BY MANUFACTURER, DIGITAL AC SERVO DRIVER, SYNCHRONOUS S-VECTOR TECHNOLOGY, 300 VAC
£1,920.00
Price with VAT:
£2,304.00
TEKNIC
ISC-1700-UCX-2-0-1
DISCONTINUED BY MANUFACTURER, SERVO CONTROLLER, 24-90 VDC, MACHINENET PORTS, SERIAL I/O PORTS
£740.24
Price with VAT:
£888.29
TEKNIC
M-1726-FX
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, 4000 QUAD / REV
£352.12
Price with VAT:
£422.54
TEKNIC
M-3441C-LN-16D
SERVO MOTOR, HUDSON, BRUSHLESS, NEMA 34 FRAME SIZE, CLASS H INSULATION, 8 POLES, 0.5 IN SHAFT DIAMETER, INCREMENTAL ENCODER
£345.26
Price with VAT:
£414.31
TEKNIC
M-3450-FX
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, 8000 QUAD/REV, 20-90 VDC, 7 ARMS, 30 AMP PEAK, 569 WATT, 600 OZ-IN, 1.5 OHMS
£968.32
Price with VAT:
£1,161.98
TEKNIC
CPM-SDSK-3411D-ELN
INTEGRATED SERVO SYSTEM, NEMA 34 - 3.42 IN (86.87 MM) SQ., 24-75 VDC (90 VDC MAX),DUST & WATER SPLASH RESISTANT
£308.83
Price with VAT:
£370.60
TEKNIC
ISC-1700-UCX-2-0-2
DISCONTINUED BY MANUFACTURER, SERVO CONTROLLER, 24-90 VDC, MACHINENET PORTS, SERIAL I/O PORTS
£373.42
Price with VAT:
£448.10
TEKNIC
CLCR-4-13
I/O AND MOTION CONTROLLER, 20-28VDC, IP20, 13 I/O POINTS, USB 2.0, 32 BIT FLOATING POINT ARM M4F PROCESSOR
£81.50
Price with VAT:
£97.80
Repair Yours
Contact Us
TEKNIC
CPM-MCVC-3436P-RLN
INTEGRATED SERVO SYSTEM, 24-75 VDC INPUT, 1,047 OZ-IN PEAK TORQUE, 2370 RPM
£309.57
Price with VAT:
£371.48
TEKNIC
IPC-75-FX-1-5-1
DISCONTINUED BY MANUFACTURER, DRIVE, AMAZON INTELLIGENT POWER CENTER, 5-WRE, 3-PHASE OR SINGLE PHASE
£870.00
Price with VAT:
£1,044.00
TEKNIC
CPM-MCPV-2310S-RLN
SERVO MOTOR, NEMA 23 - 2.33 IN (59.18 MM) SQ, 24-75VDC,
£172.14
Price with VAT:
£206.57
TEKNIC
SST-1000-JCX
DISCONTINUED BY MANUFACTURER, SERVO DRIVE, DIGITAL INTERFACE, VECTOR POSITION-MODE, 1725 WATT
£992.53
Price with VAT:
£1,191.04
TEKNIC
SST-1500-561
DISCONTINUED BY MANUFACTURER, SERVO DRIVE, DIGITAL INTERFACE, VECTOR POSITION-MODE, 1725 WATT
£735.00
Price with VAT:
£882.00
TEKNIC
M-3432P-LN-20D
SERVO MOTOR,6000RPM,10AMP,CLASS F,29.2 V/KRPM,341.9 OZ-IN,FLANGED
£288.29
Price with VAT:
£345.95
TEKNIC
CPM-MCVC-3432D-RLN
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, NEMA 34 FRAME, 3.42" FRAME SIZE, 4.63" LENGTH, 24 TO 75 V DC BUS, 90 V DC MAX, 4000 RPM MAX SPEED, 1121 W PEAK POWER, 358 W CONTINUOUS POWER, 121 T ...
£254.87
Price with VAT:
£305.84
TEKNIC
CPM-SDSK-3441D-RLN
CLEARPATH® INTEGRATED SERVO SYSTEM, 24-75 VDC (90 VDC MAX) , NEMA 34 - 3.42 IN (86.87 MM) SQ., 3150 RPM
£329.37
Price with VAT:
£395.24
TEKNIC
SST-E545-RCX-4-1-13
DISCONTINUED BY MANUFACTURER, SERVO DRIVE, ECLIPSE SST SERIES, 30 A PEAK CURRENT, 24-90 VDC INPUT, (375-427413)
£763.88
Price with VAT:
£916.66
TEKNIC
CPM-SDSK-3436D-RLN
STEPPER MOTOR, CLEARPATH-SDSK, IP53, NEMA 34, 0.9-3.6 NM MAX, 0.375 INCH DIAMETER / SHAFT, 4100 RPM, 24-75 VDC
£396.13
Price with VAT:
£475.36
TEKNIC
SST-3100-561
DISCONTINUED BY MANUFACTURER, SERVO DRIVE, DIGITAL, HIGH BANDWIDTH, INPUT VOLTAGE: 90-240 VAC (50-60HZ) OR 128-340 VDC, VECTOR CONTROLLER, (SST-3100-U)
£890.58
Price with VAT:
£1,068.70
TEKNIC
CPM-MCVC-2346D-RLN
DC MOTOR, CLEARPATH INTEGRATED BRUSHLESS DC SERVO MOTOR, 75 VDC, 6000 RPM, PEAK POWER: 1.96 HP, SHAFT DIAMETER: 0.375 IN (9.525 MM), IP53
£289.26
Price with VAT:
£347.11
TEKNIC
TG-540-2-0-5
DISCONTINUED BY MANUFACTURER, SERVO DRIVE ACCESSORY, TRAJECTORY GENERATOR
£572.24
Price with VAT:
£686.69
TEKNIC
CPM-MCPV-2311P-RLN
SERVO MOTOR, 4000 RPM, PEAK POWER: 429 W / 0.57 HP, RMS POWER: 86W / 0.11 HP
£274.88
Price with VAT:
£329.86
TEKNIC
MPC023-24-001-T
POWER-OFF BRAKE, SPRING APPLIED, POWER-OFF, 6000 RPM, 0.31 AMP, 24 V, 4.5 NM, 25 LBF, 0.5 NM HOLDING TORQUE, NEMA 23
£161.52
Price with VAT:
£193.82
TEKNIC
CPM-MCPV-2321S-RLN
SERVO MOTOR, .375 INCH SHAFT DIAMETER, NO SHAFT SEAL, 24-75VDC, 10 AMP
£285.99
Price with VAT:
£343.19
TEKNIC
CPM-MCVC-3441D-RLS
MOTOR, INPUT 24-75 VDC, 10 AMP, 0.5 INCH SHAFT DIAMETER, 160 OZ-IN (1.1 NM), 3150 RPM, 0.49 HP (364 WATT)
£306.00
Price with VAT:
£367.20
TEKNIC
CPM-MCPV-2311S-RQN
MOTOR, 24-75 VDC, 10 AMP, MCPV SERIES, 0.25 IN SHAFT DIAMETER
£277.10
Price with VAT:
£332.52
TEKNIC
CPM-MCVC-3432P-RLS
SERVO MOTOR, NEMA 34 - 3.42, INPUT VOLT 24-75 VDC
£276.36
Price with VAT:
£331.63
TEKNIC
CPM-SDSK-2321P-RQN
MOTOR, CLEARPATH, 173 W / 0.23 HP, 4000 RPM, 24-75 V, 1.7 NM, 25 LBF, 6.35 MM SHAFT DIAMETER, 0-95 PERCENT / NON-CONDENSING, DUST / WATER SPLASH RESISTANT
£254.13
Price with VAT:
£304.96
TEKNIC
CPM-SDHP-3416P-ELN
MOTOR, INTEGRATED SERVO SYSTEM, CLEARPATH, 1.23 HP, 4860 RPM, 24-75 V, 12.70 MM SHAFT DIAMETER, 50 LBF, 3.5 N-M, NEMA 34, 0-95 PERCENT AMBIENT HUMIDITY, NON-CONDENSING
£475.36
Price with VAT:
£570.43
TEKNIC
M-2311P-QN-04K
DISCONTINUED BY MANUFACTURER, SERVO MOTO, BRUSHLESS, MAX SPEED 6000 RPM, CLASS F INSULATION, 59.6 OZ-IN, 606V/RKPM
£370.12
Price with VAT:
£444.14
TEKNIC
SST-1500-ALW
DISCONTINUED BY MANUFACTURER, SERVO DRIVE, BOARD, 20 KHZ OUTPUT PWM FREQUENCY, 7-11.5 AMP RMS
£1,202.70
Price with VAT:
£1,443.24
TEKNIC
SST-3100-UCX
DISCONTINUED BY MANUFACTURER, SERVO DRIVE, 90-240 VAC, 10 AMP, DIGITAL
£890.58
Price with VAT:
£1,068.70
TEKNIC
CPM-SDSK-2321S-ELN
MOTOR, 0.23 HP, 3170 RPM, 24-75 V, 9.53 MM SHAFT DIAMETER, 25 LBF, NEMA 23
£292.66
Price with VAT:
£351.19
TEKNIC
CPM-MCVC-3441S-RLN
MOTOR, CLEARPATH, 840 RPM, 24-75 VDC, 13.0 N-M PEAK TORQUE, 12.70 MM SHAFT DIAMETER, NEMA 34
£294.88
Price with VAT:
£353.86
TEKNIC
M-2348-FH
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, BRUSHLESS, 8000 QUAD, NEMA 23
£352.12
Price with VAT:
£422.54
TEKNIC
CPM-SDSK-3432S-RLN
SERVO MOTOR, 75VDC MAX SPEED, 0.03 DEGREES REPEATABILITY, 392 OZ-IN RMS TORQUE, 267 W PEAK POWER
£302.29
Price with VAT:
£362.75
TEKNIC
CLNK-4-13
ETHERNET/IP MOTION AND I/O CONTROLLER, 20-28VDC, IP20, 13 I/O POINTS, 10BASE-T/100BASE-TX ETHERNET, 500KHZ (STEP PULSE WIDTH FIXED AT 1 MICROSECOND)
£216.35
Price with VAT:
£259.62
TEKNIC
2AS2-3PSR
DISCONTINUED BY MANUFACTURER, SELECTOR SWITCH EXTENDED 3POS MOMENTARY BLACK
£16.87
Price with VAT:
£20.24
Repair Yours
Contact Us
TEKNIC
CPM-MCVC-3411P-RLN
SERVO MOTOR, DIGITAL INPUT- VELOCITY CONTROL, FRAME 23, 332 OZ-IN TORQUE, 4000RPM, 190.36 W, 0.26HP
£219.34
Price with VAT:
£263.21
TEKNIC
CPM-SDSK-N0561P-RLN
CLEARPATH® INTEGRATED SERVO SYSTEM,100-240 VAC (1- OR 3-PHASE), 50/60HZ, 2820 RPM
£360.18
Price with VAT:
£432.22
TEKNIC
TG-540-2-0-1
DISCONTINUED BY MANUFACTURER, SERVO DRIVE ACCESSORY, TRAJECTORY GENERATOR
£474.62
Price with VAT:
£569.54
TEKNIC
CPM-SDSK-2310S-RLN
SERVO MOTOR, 0.375" SHAFT DIAMETER, NEMA 23
£192.93
Price with VAT:
£231.52
TEKNIC
CPM-MCPV-N0563P-RLS
MOTOR, MCPV MODEL, CLEARPATH SERIES, NEMA 56, 1- & 3-PHASE & 5-W, 110/208/230/380/415 VAC, 2.39-7.09 / 0.97-2.44 HP (PEAK / RMS), 1010-2560 RPM, 4652 / 1147 IN.-OZ. TORQUE (PEAK / RMS), 7-MO ...
£828.21
Price with VAT:
£993.85
TEKNIC
CPM-MCVC-2321S-RLN
MOTOR, 3170 RPM, IP53, -40 TO +70 C, NEMA 23 - 2.33 IN (59.18 MM) SQ.
£216.35
Price with VAT:
£259.62
