SEARCH NOW FOR ALL YOUR THOMSON SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
DANAHER MOTION
THOMSON INDUSTRIES
FNYBUTWNO08
LINEAR BEARING, BUSHING, PILLOW BLOCK, FLUORONYLINER, 0.5 IN, OPEN, TWIN, NOT SELF-ALIGNING, PRECISION I.D., CORROSION RESISTANT, INTEGRAL WIPER BOTH ENDS; USE WITH 0.5 IN DIAMETER CLASS L S ...
✓ IN STOCK!
£108.68
Price with VAT:
£130.41
DANAHER MOTION
THOMSON INDUSTRIES
TWIN-12ADJ
BALL BUSHING TANDEM BEARING .750IN SHAFT 2.750L
✓ IN STOCK!
£83.70
Price with VAT:
£100.44
DANAHER MOTION
THOMSON INDUSTRIES
PB12A
LINEAR BEARING, BALL BUSHING, PILLOW BLOCK, PRECISION STEEL, 0.75 IN, CLOSED, SELF-ALIGNING, INTEGRAL SEALS BOTH ENDS; USE WITH 0.75 IN DIAMETER CLASS S SHAFT IN END SUPPORTED APPLICATIONS
✓ IN STOCK!
£104.40
Price with VAT:
£125.28
DANAHER MOTION
THOMSON INDUSTRIES
X255134222
RM115-52, REDIMOUNT KIT GEARS, MACHINED, GEAR BOX
✓ IN STOCK!
£110.59
Price with VAT:
£132.71
DANAHER MOTION
THOMSON MICRON
36-101-211-0041
POSITION TRANSDUCER, RATIO R1, DIRECT
✓ IN STOCK!
£120.57
Price with VAT:
£144.68
Repair Yours
Contact Us
DANAHER MOTION
THOMSON INDUSTRIES
R50-3
FLANGE, BALL NUT, 2-1/2 INCH BORE, 4-7/8 INCH OD, 3/4 INCH WIDTH
✓ IN STOCK!
£93.68
Price with VAT:
£112.42
DANAHER MOTION
THOMSON INDUSTRIES
5704687
ACTUATOR, KIT: CAPACITOR, FOR 110VAC ACTUATOR (CAP RATED @330V)
✓ IN STOCK!
£121.66
Price with VAT:
£145.99
Repair Yours
Contact Us
DANAHER MOTION
THOMSON INDUSTRIES
8120-448-002
NUT FLANGE, 3.000-12 UN THREAD, CARBONSTEEL, COMPATIBLE BALL NUT DIAMETER: 2.000 IN
✓ IN STOCK!
£87.19
Price with VAT:
£104.62
DANAHER MOTION
THOMSON INDUSTRIES
A122026SS-DD
LINEAR BEARING, BALL BUSHING ONLY, PRECISION STEEL, 0.75INCH SIZE, CLOSED/NOT SELF-ALIGNING, STAINLESS STEEL, GRADE A, USE W/ 0.75INCH DIAMETER CLASS S SHAFT, INTEGRAL SEAL BOTH ENDS
✓ IN STOCK!
£100.69
Price with VAT:
£120.83
DANAHER MOTION
THOMSON INDUSTRIES
SPB12
LINEAR BEARING, BALL BUSHING, PILLOW BLOCK, SUPER, 0.75 IN, CLOSED, SELF-ALIGNING; USE WITH 0.75 IN DIAMETER CLASS L SHAFT IN END SUPPORTED APPLICATIONS
✓ IN STOCK!
£92.46
Price with VAT:
£110.95
DANAHER MOTION
THOMSON INDUSTRIES
MODKIT8-L4L
LINEAR BEARING, LUBE 4 LIFE KIT, ACCESSORY, 0.5 IN, CLOSED; USE WITH 0.5 IN NOMINAL DIAMETER CLOSED BUSHING BEARINGS
✓ IN STOCK!
£81.05
Price with VAT:
£97.26
DANAHER MOTION
THOMSON INDUSTRIES
PB8A
LINEAR BEARING, BALL BUSHING, PILLOW BLOCK, PRECISION STEEL, 0.5 IN, CLOSED, SELF-ALIGNING, INTEGRAL SEALS BOTH ENDS; USE WITH 0.5 IN DIAMETER CLASS S SHAFT IN END SUPPORTED APPLICATIONS
✓ IN STOCK!
£85.96
Price with VAT:
£103.15
DANAHER MOTION
THOMSON INDUSTRIES
LSR-16-PD
SHAFT SUPPORT, RAIL ONLY, LOW PROFILE, PREDRILLED, STEEL, 48 IN LONG, USE WITH 1 IN DIAMETER SHAFT
✓ IN STOCK!
£72.15
Price with VAT:
£86.58
DANAHER MOTION
THOMSON INDUSTRIES
FNYBUPBO12
LINEAR BEARING, BUSHING, PILLOW BLOCK, FLUORONYLINER, 0.75 IN, OPEN, NOT SELF-ALIGNING, PRECISION I.D., CORROSION RESISTANT, INTEGRAL WIPER BOTH ENDS; USE WITH 0.75 IN DIAMETER CLASS L SHAFT ...
✓ IN STOCK!
£105.44
Price with VAT:
£126.53
DANAHER MOTION
THOMSON INDUSTRIES
SUPER20
LINEAR BEARING, BALL BUSHING ONLY, SUPER, 1.25 IN, CLOSED, SELF-ALIGNING, ADJUSTABLE; USE WITH 1.25 IN DIAMETER CLASS L SHAFT IN END SUPPORTED APPLICATIONS
✓ IN STOCK!
£74.62
Price with VAT:
£89.54
DANAHER MOTION
THOMSON INDUSTRIES
411N15A0
PROFILE RAIL LINEAR GUIDE, 400 SERIES BALL CARRIAGE, SIZE: 15 MM, NORMAL GRADE, A STYLE, 0 - CLEARANCE PRELOAD, STEEL ALLOY
✓ IN STOCK!
£101.57
Price with VAT:
£121.89
DANAHER MOTION
THOMSON INDUSTRIES
A122026SS
LINEAR BEARING, BALL BUSHING ONLY, PRECISION STEEL, 0.75 IN, CLOSED, NOT SELF-ALIGNING, STAINLESS STEEL, A GRADE; USE WITH 0.75 IN DIAMETER CLASS S SHAFT IN END SUPPORTED APPLICATIONS
✓ IN STOCK!
£74.88
Price with VAT:
£89.86
DANAHER MOTION
THOMSON INDUSTRIES
FNYBUPB16ALS
LINEAR BEARING, BUSHING, PILLOW BLOCK, FLUORONYLINER, 1 IN, CLOSED, SELF-ALIGNING, PRECISION I.D., CORROSION RESISTANT, LESS SEALS; USE WITH 1 IN DIAMETER CLASS L SHAFT IN END SUPPORTED APPL ...
✓ IN STOCK!
£61.63
Price with VAT:
£73.96
DANAHER MOTION
THOMSON INDUSTRIES
SR8-PD
6" BOLT, FOR 1/2" DIAM SHAFT, 24" LONG, ALUMINUM ROUND DRILLED SHAFT SUPPORT RAIL 1-1/2" BASE WIDTH, 3/16" BASE THICKNESS, 0.169" MOUNTING HOLE DIAM, 1" BTW MOUNT HOLE CENTERS
✓ IN STOCK!
£56.76
Price with VAT:
£68.11
DANAHER MOTION
THOMSON INDUSTRIES
SUPER16-DD
LINEAR BEARING, BALL BUSHING ONLY, SUPER, 1 INCH, CLOSED, SELF-ALIGNING, ADJUSTABLE, INTEGRAL SEALS BOTH ENDS, USE WITH 1 INCH DIAMETER CLASS L SHAFT IN END SUPPORTED APPLICATIONS
✓ IN STOCK!
£87.10
Price with VAT:
£104.51
DANAHER MOTION
THOMSON INDUSTRIES
A101824SS
LINEAR BEARING, BALL BUSHING ONLY, PRECISION STEEL, 0.625 IN, CLOSED, NOT SELF-ALIGNING, STAINLESS STEEL, A GRADE; USE WITH 0.625 IN DIAMETER CLASS S SHAFT IN END SUPPORTED APPLICATIONS
✓ IN STOCK!
£59.12
Price with VAT:
£70.95
THOMSON LINEAR
1CA08HA0L
LINEAR GUIDE, 1CA, ROUND SHAFT, CONTINUOUSLY SUPPORTED, 1 TWIN PILLOW BLOCK, 0.500IN, ONE GUIDE SHAFT, 290 LBF DYNAMIC LOAD CAPACITY
✓ IN STOCK!
£53.39
Price with VAT:
£64.06
DANAHER MOTION
THOMSON INDUSTRIES
A162536-D
LINEAR BEARING, BALL BUSHING ONLY, PRECISION STEEL, 1 IN, CLOSED, NOT SELF-ALIGNING, INTEGRAL SEAL ONE END, A GRADE; USE WITH 1 IN DIAMETER CLASS S SHAFT IN END SUPPORTED APPLICATIONS
✓ IN STOCK!
£89.44
Price with VAT:
£107.33
DANAHER MOTION
THOMSON INDUSTRIES
101-0-0009
CLUTCH BRAKE, ACTUATOR RETURN ASSEMBLY, ACCY BRACKET ASSY CB-10 AC
✓ IN STOCK!
£55.21
Price with VAT:
£66.25
DANAHER MOTION
THOMSON INDUSTRIES
FNYBUPBO08
LINEAR BEARING, BUSHING, PILLOW BLOCK, FLUORONYLINER, 0.5 IN, OPEN, NOT SELF-ALIGNING, PRECISION I.D., CORROSION RESISTANT, INTEGRAL WIPER BOTH ENDS; USE WITH 0.5 IN DIAMETER CLASS L SHAFT I ...
✓ IN STOCK!
£60.28
Price with VAT:
£72.33
DANAHER MOTION
THOMSON INDUSTRIES
7825740
ACTUATOR, KIT: DRIVE TUBE: SYNCHRO
✓ IN STOCK!
£73.68
Price with VAT:
£88.41
DANAHER MOTION
THOMSON INDUSTRIES
A162536
LINEAR BEARING, BALL BUSHING ONLY, PRECISION STEEL, 1 IN, CLOSED, NOT SELF-ALIGNING, A GRADE; USE WITH 1 IN DIAMETER CLASS S SHAFT IN END SUPPORTED APPLICATIONS
✓ IN STOCK!
£68.98
Price with VAT:
£82.77
DANAHER MOTION
THOMSON INDUSTRIES
FNYBUPB12
LINEAR BEARING, BUSHING, PILLOW BLOCK, FLUORONYLINER, 0.75 IN, CLOSED, NOT SELF-ALIGNING, PRECISION I.D., CORROSION RESISTANT, INTEGRAL WIPER BOTH ENDS; USE WITH 0.75 IN DIAMETER CLASS L SHA ...
✓ IN STOCK!
£49.73
Price with VAT:
£59.68
DANAHER MOTION
THOMSON INDUSTRIES
SUPER24
LINEAR BEARING, BALL BUSHING ONLY, SUPER, 1.5 IN, CLOSED, SELF-ALIGNING, ADJUSTABLE; USE WITH 1.5 IN DIAMETER CLASS L SHAFT IN END SUPPORTED APPLICATIONS
✓ IN STOCK!
£59.70
Price with VAT:
£71.64
DANAHER MOTION
THOMSON INDUSTRIES
SR12
SHAFT SUPPORT, RAIL ONLY, STANDARD PROFILE, NO HOLES, ALUMINUM, 24 IN LONG, USE WITH 0.75 IN DIAMETER SHAFT
✓ IN STOCK!
£51.59
Price with VAT:
£61.91
DANAHER MOTION
THOMSON INDUSTRIES
SSU16WW
LINEAR BEARING, BALL BUSHING ONLY, SUPER SMART, 1 IN, CLOSED, SELF-ALIGNING, ADJUSTABLE, INTEGRAL WIPER BOTH ENDS; USE WITH 1 IN DIAMETER CLASS L SHAFT IN END SUPPORTED APPLICATIONS
✓ IN STOCK!
£43.77
Price with VAT:
£52.52
DANAHER MOTION
THOMSON INDUSTRIES
SUPER16
LINEAR BEARING, BALL BUSHING ONLY, SUPER, 1 INCH NOMINAL DIAMETER, CLOSED, SINGLE, SELF-ALIGNING, ADJUSTABLE, 6 BALL CIRCUITS
✓ IN STOCK!
£57.56
Price with VAT:
£69.07
DANAHER MOTION
THOMSON INDUSTRIES
SPB10
LINEAR BEARING, BALL BUSHING, PILLOW BLOCK, SUPER, 0.625 IN, CLOSED, SELF-ALIGNING; USE WITH 0.625 IN DIAMETER CLASS L SHAFT IN END SUPPORTED APPLICATIONS
✓ IN STOCK!
£56.54
Price with VAT:
£67.85
DANAHER MOTION
THOMSON INDUSTRIES
9600-831-017
LINEAR UNIT, LIMIT SWITCH BRACKET
✓ IN STOCK!
£60.17
Price with VAT:
£72.20
DANAHER MOTION
THOMSON INDUSTRIES
9600-841-001
LINEAR UNIT, INDUCTIVE PROX SENSOR BRACKET
✓ IN STOCK!
£53.23
Price with VAT:
£63.88
DANAHER MOTION
THOMSON INDUSTRIES
SPB12-ABBL4L
LINEAR BEARING, BALL BUSHING, PILLOW BLOCK, PRECISION STEEL, 0.75 IN, CLOSED, NOT SELF-ALIGNING, USE WITH 0.75 IN DIAMETER CLASS S SHAFT IN END SUPPORTED APPLICATIONS
✓ IN STOCK!
£45.43
Price with VAT:
£54.51
DANAHER MOTION
THOMSON INDUSTRIES
SSEM20OPNWW
LINEAR BEARING, BALL BUSHING ONLY, SUPER SMART, 20 MM, OPEN, SELF-ALIGNING, ADJUSTABLE, INTEGRAL WIPER BOTH ENDS; USE WITH 20 MM DIAMETER CLASS MM (H6) SHAFT IN CONTINUOUSLY SUPPORTED APPLIC ...
✓ IN STOCK!
£71.25
Price with VAT:
£85.50
DANAHER MOTION
THOMSON INDUSTRIES
A61014SS
LINEAR BEARING, BALL BUSHING ONLY, PRECISION STEEL, 0.375 IN, CLOSED, NOT SELF-ALIGNING, STAINLESS STEEL, A GRADE; USE WITH 0.375 IN DIAMETER CLASS S SHAFT IN END SUPPORTED APPLICATIONS
✓ IN STOCK!
£61.40
Price with VAT:
£73.68
DANAHER MOTION
THOMSON INDUSTRIES
5702655
WIPER KIT, 1.500 X 0.473, BRUSH, 2 WIPERS, 1 RETAINER
✓ IN STOCK!
£49.99
Price with VAT:
£59.99
DANAHER MOTION
THOMSON MICRON
A40L-0001-0199
RESISTOR MODULE
✓ IN STOCK!
£38.20
Price with VAT:
£45.84
THOMSON LINEAR
SB10
SHAFT END SUPPORT BLOCK, 5/8 INCH BORE, 60 CASE SHAFT, 2 BOLT SUPPORT BLOCK, 1 INCH BASE TO CENTER OF SHAFT, 1-7/8 INCH BOLT CENTER ACROSS SHAFT
✓ IN STOCK!
£38.89
Price with VAT:
£46.66
DANAHER MOTION
THOMSON INDUSTRIES
8107-101-002
BALL NUT WIPER, 0.750 INCH, W/ 2X WIPERS, 1X END CAP, (R-0705-4)
✓ IN STOCK!
£55.48
Price with VAT:
£66.57
DANAHER MOTION
THOMSON INDUSTRIES
SSU120PNWW
BALL BUSHING BEARING, SUPER SMART BALL BUSHING, ADJUSTABLE, OPEN,SELF-ALIGNING, NOT CORROSION RESISTANT, NO WIPERS, 3/4 IN DIA SHAFT, 1-1/4 IN OD, 1-5/8 IN L
✓ IN STOCK!
£53.98
Price with VAT:
£64.77
DANAHER MOTION
THOMSON INDUSTRIES
FNYBUPB06
LINEAR BEARING, BUSHING, PILLOW BLOCK, FLUORONYLINER, 0.375 IN, CLOSED, NOT SELF-ALIGNING, PRECISION I.D., CORROSION RESISTANT, INTEGRAL WIPER BOTH ENDS; USE WITH 0.375 IN DIAMETER CLASS L S ...
✓ IN STOCK!
£49.27
Price with VAT:
£59.12
DANAHER MOTION
THOMSON INDUSTRIES
FNYBUPB06AL
PILLOW BLOCK, LINEAR GUIDE, FLUORONYLINER, 0.375 INCH SHAFT DIAMETER, CLOSED, SELF-ALIGNING, CORROSION RESISTANT
✓ IN STOCK!
£62.91
Price with VAT:
£75.50
DANAHER MOTION
THOMSON INDUSTRIES
ADJ122026
LINEAR BEARING, BALL BUSHING ONLY, PRECISION STEEL, 0.75 IN, CLOSED, NOT SELF-ALIGNING, ADJUSTABLE, A GRADE; USE WITH 0.75 IN DIAMETER CLASS L SHAFT IN END SUPPORTED APPLICATIONS
✓ IN STOCK!
£60.11
Price with VAT:
£72.13
DANAHER MOTION
THOMSON INDUSTRIES
5702654
WIPER KIT,1.500X0.250,BRUSH
✓ IN STOCK!
£48.72
Price with VAT:
£58.46
DANAHER MOTION
THOMSON INDUSTRIES
A122026-DD
LINEAR BEARING, BALL BUSHING ONLY, PRECISION STEEL, 0.75 IN, CLOSED, NOT SELF-ALIGNING, INTEGRAL SEALS BOTH ENDS, A GRADE; USE WITH 0.75 IN DIAMETER CLASS S SHAFT IN END SUPPORTED APPLICATIO ...
✓ IN STOCK!
£46.50
Price with VAT:
£55.80
DANAHER MOTION
THOMSON INDUSTRIES
8107-448-007
NUT FLANGE, 1.173-18 UNS THREAD, CARBONSTEEL, COMPATIBLE BALL NUT DIAMETER: 0.750 IN
✓ IN STOCK!
£39.67
Price with VAT:
£47.60
