SEARCH NOW FOR ALL YOUR WAGO SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Panel Accessories / Terminal Blk/Strip Wiring Dev
Radwell is an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
WAGO
236-103
PCB TERMINAL BLOCK, 3 POLE, 24 AMP, 630 V, CAGE CLAMP, 28-12 AWG, POLYAMIDE MATERIAL, GRAY, -60 +105 DEGREE C
✓ IN STOCK!
£0.61
Price with VAT:
£0.73
WAGO
236-501
STACKABLE PCB TERMINAL BLOCK, 2.5 MM², PIN SPACING 7.5/7.62 MM, 1-POLE, CAGE CLAMP®, COMMONING OPTION, 2;50 MM², GRAY
✓ IN STOCK!
£0.18
Price with VAT:
£0.22
WAGO
237-132
PCB TERMINAL BLOCK, 2.5 MM², PIN SPACING 5.08 MM, 2-POLE, 2;50 MM², GRAY
✓ IN STOCK!
£0.41
Price with VAT:
£0.49
WAGO
256-507
PCB TERMINAL BLOCK, PUSH-BUTTON, 2.5 MM², PIN SPACING 7.5/7.62 MM, 7-POLE, CAGE CLAMP®, COMMONING OPTION, 2,50 MM², GRAY
✓ IN STOCK!
£1.70
Price with VAT:
£2.04
WAGO
256-602/333-000
PCB TERMINAL BLOCK, FINGER-OPERATED LEVERS, 2.5 MM², PIN SPACING 10/10.16 MM, 2-POLE, CAGE CLAMP®, COMMONING OPTION, 2,50 MM², GRAY
✓ IN STOCK!
£0.48
Price with VAT:
£0.57
WAGO
260-107
2-CONDUCTOR TERMINAL STRIP; 7-POLE; WITHOUT PUSH-BUTTONS; WITH FIXING FLANGES; FOR SCREW OR SIMILAR MOUNTING TYPES; FIXING HOLE 3.2 MM ; 1.5 MM ; CAGE CLAMP ; 1,50 MM ; GRAY
✓ IN STOCK!
£1.67
Price with VAT:
£2.00
WAGO
260-341
4-CONDUCTOR TERMINAL BLOCK; WITHOUT PUSH-BUTTONS; WITH SNAP-IN MOUNTING FOOT; FOR PLATE THICKNESS 0.6 - 1.2 MM, FIXING HOLE 3.5 MM Ø; CAN BE COMMONED WITH ADJACENT JUMPERS AND STAGGERED JUMP ...
✓ IN STOCK!
£0.46
Price with VAT:
£0.55
WAGO
280-565/280-321
2-CONDUCTOR ACTUATOR TERMINAL BLOCK, WITH COLORED CONDUCTOR ENTRIES, 2.5 MM², CAGE CLAMP®, 2;50 MM², GRAY
✓ IN STOCK!
£2.68
Price with VAT:
£3.21
WAGO
280-572/281-420
3-CONDUCTOR ACTUATOR SUPPLY TERMINAL BLOCK, LED (RED), WITH 1N4007 RECOVERY DIODE, WITH GROUND CONTACT, WITH COLORED CONDUCTOR ENTRIES, 2.5 MM², CAGE CLAMP®, 2,50 MM², GRAY
✓ IN STOCK!
£9.60
Price with VAT:
£11.52
WAGO
280-588/280-320
4-CONDUCTOR SENSOR TERMINAL BLOCK, FOR PNP (POSITIVE) SWITCHING SENSORS, FOR FUSE PLUGS, WITH GRAY END PLATE, WITH COLORED CONDUCTOR ENTRIES, 2.5 MM², CAGE CLAMP®, 2,50 MM², GRAY
✓ IN STOCK!
£5.45
Price with VAT:
£6.54
WAGO
280-615/281-428
VARIABLE RESISTOR TERMINAL BLOCK, 20 OHM - 1 KOHM, 0.75 W W / BALANCING RESISTANCE
✓ IN STOCK!
£11.77
Price with VAT:
£14.13
WAGO
280-637
TERMINAL BLOCK, DIN RAIL, 3 POSITION, 28-12AWG; NO. OF POSITIONS:3POSITIONS; WIRE SIZE AWG MIN:28AWG; WIRE SIZE AWG MAX:12AWG; CONDUCTOR AREA CSA:2.5MM²; WIRE CONNECTION METHOD:CLAMP; RATED ...
✓ IN STOCK!
£1.83
Price with VAT:
£2.20
WAGO
260-304
2-CONDUCTOR TERMINAL BLOCK, WITHOUT PUSH-BUTTONS, WITH FIXING FLANGE, FOR SCREW OR SIMILAR MOUNTING TYPES, FIXING HOLE 3.2 MM Ø, CAN BE COMMONED WITH ADJACENT JUMPERS AND STAGGERED JUMPERS, ...
✓ IN STOCK!
£0.33
Price with VAT:
£0.39
WAGO
260-331
TERMINAL BLOCK, PLUGGABLE, 4 POSITION, 28-16AWG; NO. OF POSITIONS:4POSITIONS; WIRE SIZE AWG MIN:28AWG; WIRE SIZE AWG MAX:16AWG; CONDUCTOR AREA CSA:1.5MM²; WIRE CONNECTION METHOD:CLAMP; RATED ...
✓ IN STOCK!
£0.46
Price with VAT:
£0.55
WAGO
280-543
DOUBLE-DECK TERMINAL BLOCK, THROUGH/THROUGH TERMINAL BLOCK, WITH ADDITIONAL JUMPER POSITION ON LOWER LEVEL, FOR DIN-RAIL 35 X 15 AND 35 X 7.5, 2.5 MM², CAGE CLAMP®, 2,50 MM², GRAY/GRAY
✓ IN STOCK!
£1.37
Price with VAT:
£1.64
WAGO
280-570/281-434
4-CONDUCTOR SENSOR TERMINAL BLOCK, LED (RED), FOR PNP-(HIGH-SIDE) SWITCHING SENSORS, 2.5 MM², CAGE CLAMP®, 2,50 MM², GRAY
✓ IN STOCK!
£6.60
Price with VAT:
£7.92
WAGO
280-626
TERMINAL BLOCK, DIN RAIL, 4 POSITION, 28-12AWG; NO. OF POSITIONS:4POSITIONS; WIRE SIZE AWG MIN:28AWG; WIRE SIZE AWG MAX:12AWG; CONDUCTOR AREA CSA:2.5MM²; WIRE CONNECTION METHOD:CLAMP; RATED ...
✓ IN STOCK!
£1.61
Price with VAT:
£1.93
WAGO
280-651
TERMINAL BLOCK, DIN RAIL, 3 POSITION, 28-12AWG; NO. OF POSITIONS:3POSITIONS; WIRE SIZE AWG MIN:28AWG; WIRE SIZE AWG MAX:12AWG; CONDUCTOR AREA CSA:2.5MM²; WIRE CONNECTION METHOD:CLAMP; RATED ...
✓ IN STOCK!
£0.75
Price with VAT:
£0.90
WAGO
280-673/281-410
COMPONENT TERMINAL BLOCK; 3-CONDUCTOR; WITH DIODE 1N4007; ANODE, LEFT SIDE; FOR DIN-RAIL 35 X 15 AND 35 X 7.5; 2.5 MM²; CAGE CLAMP®; 2,50 MM²; GRAY
✓ IN STOCK!
£2.91
Price with VAT:
£3.50
WAGO
280-686
4-CONDUCTOR CARRIER TERMINAL BLOCK, FOR DIN-RAIL 35 X 15 AND 35 X 7.5, 2.5 MM², CAGE CLAMP®, 2;50 MM², GRAY
✓ IN STOCK!
£1.98
Price with VAT:
£2.38
WAGO
280-830
TERMINAL BLOCK, DIN RAIL, 4 POSITION, 28-12AWG; NO. OF POSITIONS:4POSITIONS; WIRE SIZE AWG MIN:28AWG; WIRE SIZE AWG MAX:12AWG; CONDUCTOR AREA CSA:2.5MM²; WIRE CONNECTION METHOD:CLAMP; RATED ...
✓ IN STOCK!
£1.33
Price with VAT:
£1.59
WAGO
280-835
TERMINAL BLOCK, 4 POSITION, 28-12AWG; NO. OF POSITIONS:4POSITIONS; WIRE SIZE AWG MIN:28AWG; WIRE SIZE AWG MAX:12AWG; CONDUCTOR AREA CSA:2.5MM; WIRE CONNECTION METHOD:CLAMP; RATED CURRENT:20A ...
✓ IN STOCK!
£1.20
Price with VAT:
£1.45
WAGO
280-883
CONNECTOR, DISCONNECT, 8-9 MM STRIPPING LENGTH, 4-CONDUCTOR, 1 LEVEL, PUSH IN/SPRING TERMINATION, 5.0 MM TERMINAL WIDTH, ORANGE, POLYAMIDE MATERIAL
✓ IN STOCK!
£3.55
Price with VAT:
£4.26
WAGO
280-915/281-410
TERMINAL BLOCK, DIN RAIL, 2POS, 14AWG; NO. OF POSITIONS:2POSITIONS; WIRE SIZE AWG MIN:28AWG; WIRE SIZE AWG MAX:14AWG; CONDUCTOR AREA CSA:2.5MM; WIRE CONNECTION METHOD:PUSH IN; RATED CURRENT: ...
✓ IN STOCK!
£2.03
Price with VAT:
£2.43
WAGO
281-418
TEST PLUG MODULE, MODULAR, SUITABLE FOR ALL WAGO 281, 776, 777 AND 781 SERIES RAIL-MOUNTED TERMINAL BLOCKS WITH JUMPER SLOTS IN THE CURRENT BAR, GRAY
✓ IN STOCK!
£1.19
Price with VAT:
£1.42
WAGO
281-604
TERMINAL BLOCK, DIN RAIL, 2 POSITION, 28-12AWG; NO. OF POSITIONS:2POSITIONS; WIRE SIZE AWG MIN:28AWG; WIRE SIZE AWG MAX:12AWG; CONDUCTOR AREA CSA:4MM²; WIRE CONNECTION METHOD:CLAMP; RATED CU ...
✓ IN STOCK!
£0.92
Price with VAT:
£1.10
WAGO
281-612/281-541
2-CONDUCTOR FUSE TERMINAL BLOCK, W/PIVOTING FUSE HOLDER & BLOWN FUSE INDICATION BY LED, DIN-35 RAIL MOUNT, ANGLED DESIGN, CENTER MARKING, 800 V VOLTAGE, 8 KV SURGE VOLTAGE, 10 AMP CURRENT, 1 ...
✓ IN STOCK!
£12.00
Price with VAT:
£14.40
WAGO
281-613/281-541
2-CONDUCTOR FUSE TERMINAL BLOCK; WITH PIVOTING FUSE HOLDER; FOR MINIATURE METRIC FUSE 1/4 X 1 MM; WITH BLOWN FUSE INDICATION BY LED; FOR DIN-RAIL 35 X 15 AND 35 X 7.5; 4 MM ; CAGE CLAMP ; 4, ...
✓ IN STOCK!
£12.00
Price with VAT:
£14.40
WAGO
280-677
4-CONDUCTOR GROUND TERMINAL BLOCK, 2.5 MM², CENTER MARKING, FOR DIN-RAIL 35 X 15 AND 35 X 7.5, CAGE CLAMP®, 2,50 MM², GREEN-YELLOW
✓ IN STOCK!
£2.33
Price with VAT:
£2.80
WAGO
280-838
4-CONDUCTOR SHIELD TERMINAL BLOCK; 2.5 MM ; CENTER MARKING; FOR DIN-RAIL 35 X 15 AND 35 X 7.5; CAGE CLAMP ; 2,50 MM ; WHITE
✓ IN STOCK!
£4.11
Price with VAT:
£4.93
WAGO
280-879
2-CONDUCTOR DISCONNECT/TEST TERMINAL BLOCK, WITH PIVOTING KNIFE DISCONNECT, WITH TEST PORT, ORANGE DISCONNECT LINK, FOR DIN-RAIL 35 X 15 AND 35 X 7.5, 2.5 MM², CAGE CLAMP®, 2,50 MM², ORANGE
✓ IN STOCK!
£2.13
Price with VAT:
£2.56
WAGO
280-903
TERMINAL BLOCK, DIN RAIL, 2 POSITION, 28-12AWG; NO. OF POSITIONS:2POSITIONS; WIRE SIZE AWG MIN:28AWG; WIRE SIZE AWG MAX:12AWG; CONDUCTOR AREA CSA:2.5MM²; WIRE CONNECTION METHOD:CLAMP; RATED ...
✓ IN STOCK!
£0.42
Price with VAT:
£0.50
WAGO
280-942/281-487
COMPONENT TERMINAL BLOCK, DOUBLE-DECK, WITH 2 DIODES 1N4007, BOTTOM ANODE, FOR DIN-RAIL 35 X 15 AND 35 X 7.5, 2.5 MM², CAGE CLAMP®, 2;50 MM², GRAY
✓ IN STOCK!
£8.36
Price with VAT:
£10.03
WAGO
280-994
TERMINAL BLOCK, DIN RAIL, 4 POSITION, 24-12AWG; NO. OF POSITIONS:4POSITIONS; WIRE SIZE AWG MIN:28AWG; WIRE SIZE AWG MAX:12AWG; CONDUCTOR AREA CSA:2.5MM²; WIRE CONNECTION METHOD:CLAMP; RATED ...
✓ IN STOCK!
£0.95
Price with VAT:
£1.14
WAGO
281-332
SEPARATOR PLATE, DIN RAIL TERMINAL BLOCK; ACCESSORY TYPE:SEPARATOR PLATE; FOR USE WITH:RAIL MOUNTED TERMINAL BLOCKS; PRODUCT RANGE:- ROHS COMPLIANT: YES
✓ IN STOCK!
£0.31
Price with VAT:
£0.37
WAGO
281-343
END & INTERMEDIATE PLATE, DIN RAIL TB; FOR USE WITH:WAGO DIN RAIL TERMINAL BLOCKS; ACCESSORY TYPE:END & INTERMEDIATE PLATE; PRODUCT RANGE:281 SERIES ROHS COMPLIANT: YES
✓ IN STOCK!
£0.30
Price with VAT:
£0.37
WAGO
281-611
TERMINAL BLOCK, 2 CONDUCTOR FUSE, WITH PIVOTING FUSE HOLDER, FOR 5 X 20 MM MINIATURE METRIC FUSE, WITHOUT BLOWN FUSE INDICATION, FOR DIN-RAIL 35 X 15 AND 35 X 7.5, 4 MM, CAGE CLAMP. 4.00 MM, ...
✓ IN STOCK!
£2.76
Price with VAT:
£3.31
WAGO
740-108
PCB TERMINAL BLOCK, 2.5 MM², PIN SPACING 5 MM, 8-POLE, CAGE CLAMP®, 2,50 MM², GRAY
✓ IN STOCK!
£2.08
Price with VAT:
£2.50
WAGO
775-642
MULTILEVEL INSTALLATION TRM BLK - ROHS STATUS:YES (ID #: 51128779) (EAN #: 4044918477048)
✓ IN STOCK!
£2.80
Price with VAT:
£3.36
WAGO
782-317
END AND INTERMEDIATE PLATE, 1.5 MM THICK, ORANGE
✓ IN STOCK!
£0.28
Price with VAT:
£0.34
WAGO
783-317
END AND INTERMEDIATE PLATE, 1.5 MM THICK, ORANGE
✓ IN STOCK!
£0.26
Price with VAT:
£0.31
WAGO
783-601
2-CONDUCTOR THROUGH TERMINAL BLOCK, 16 MM, CENTER MARKING, FOR DIN-RAIL 35 X 15 AND 35 X 7.5, CAGE CLAMP, 16,00 MM, GRAY
✓ IN STOCK!
£1.59
Price with VAT:
£1.91
WAGO
784-613
1-CONDUCTOR N-DISCONNECT TERMINAL BLOCK, 10 MM², CAGE CLAMP®, 10,00 MM², BLUE
✓ IN STOCK!
£2.23
Price with VAT:
£2.68
WAGO
253-103
2-CONDUCTOR PCB TERMINAL BLOCK; 1.5 MM ; PIN SPACING 5 MM; 3-POLE; PUSH WIRE ; 1,50 MM ; GRAY
✓ IN STOCK!
£0.77
Price with VAT:
£0.92
WAGO
255-402/333-000
PCB TERMINAL BLOCK; FINGER-OPERATED LEVERS; 2.5 MM²; PIN SPACING 5/5.08 MM; 2-POLE; CAGE CLAMP®; COMMONING OPTION; 2,50 MM²; GRAY
✓ IN STOCK!
£0.47
Price with VAT:
£0.57
WAGO
255-744
STACKABLE PCB TERMINAL BLOCK, PUSH-BUTTON, 2.5 MM², PIN SPACING 5/5.08 MM, 1-POLE, CAGE CLAMP®, COMMONING OPTION, 2;50 MM², BLUE
✓ IN STOCK!
£0.22
Price with VAT:
£0.26
WAGO
256-501
STACKABLE PCB TERMINAL BLOCK; PUSH-BUTTON; 2.5 MM ; PIN SPACING 7.5/7.62 MM; 1-POLE; CAGE CLAMP ; COMMONING OPTION; 2,50 MM ; GRAY
✓ IN STOCK!
£0.19
Price with VAT:
£0.23
WAGO
281-622
2-CONDUCTOR FUSE TERMINAL BLOCK, WITH PIVOTING FUSE HOLDER, FOR 5 X 30 MM MINIATURE METRIC FUSE, WITHOUT BLOWN FUSE INDICATION, FOR DIN-RAIL 35 X 15 AND 35 X 7.5, 4 MM², CAGE CLAMP®, 4,00 MM ...
✓ IN STOCK!
£3.53
Price with VAT:
£4.24
