Product Search

    SEARCH NOW FOR ALL YOUR WEILER SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Motors/GearBox/Clutch / Brush

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 251-300 of 500.
    WEILER 90297

    WEILER

    90297

    1/2" DIAM STEEL CRIMPED END BRUSH 7/8" TRIM LENGTH, 1/4" SHANK DIAM, 25,000 MAX RPM
    £21.91 Price with VAT: £26.30 Buy Surplus As Low As £13.60 Price with VAT: £16.32
    £13.60 Price with VAT: £16.32
    WEILER 90303

    WEILER

    90303

    2-3/4" DIAM STEEL FLARED CRIMPED END BRUSH 1/4" SHANK DIAM, 16,000 MAX RPM
    £34.01 Price with VAT: £40.81 Buy Surplus As Low As £20.40 Price with VAT: £24.48
    £20.40 Price with VAT: £24.48
    WEILER 90304

    WEILER

    90304

    3" DIAM STEEL FLARED CRIMPED END BRUSH 1/4" SHANK DIAM, 16,000 MAX RPM
    £35.52 Price with VAT: £42.62 Buy Surplus As Low As £21.91 Price with VAT: £26.30
    £21.91 Price with VAT: £26.30
    WEILER 90305

    WEILER

    90305

    1-1/2" DIAM STAINLESS STEEL FLARED CRIMPED END BRUSH 1/4" SHANK DIAM, 20,000 MAX RPM
    £34.01 Price with VAT: £40.81 Buy Surplus As Low As £20.40 Price with VAT: £24.48
    £20.40 Price with VAT: £24.48
    WEILER 90306

    WEILER

    90306

    2-3/4" DIAM STAINLESS STEEL FLARED CRIMPED END BRUSH 1/4" SHANK DIAM, 16,000 MAX RPM
    £58.94 Price with VAT: £70.73 Buy Surplus As Low As £35.52 Price with VAT: £42.62
    £35.52 Price with VAT: £42.62
    WEILER 90323

    WEILER

    90323

    1-1/8" DIAM STEEL KNOTTED END BRUSH 7/8" TRIM LENGTH, 1/4" SHANK DIAM, 22,000 MAX RPM
    £34.01 Price with VAT: £40.81 Buy Surplus As Low As £20.40 Price with VAT: £24.48
    £20.40 Price with VAT: £24.48
    WEILER 98443

    WEILER

    98443

    1/4" DIAM STEEL CRIMPED END BRUSH 7/16" TRIM LENGTH, 1/8" SHANK DIAM, 37,000 MAX RPM
    £8.31 Price with VAT: £9.98 Buy Surplus As Low As £4.99 Price with VAT: £5.99
    £4.99 Price with VAT: £5.99
    WEILER 98445

    WEILER

    98445

    3/16" DIAM STAINLESS STEEL CRIMPED END BRUSH 1/4" TRIM LENGTH, 1/8" SHANK DIAM, 37,000 MAX RPM
    £7.30 Price with VAT: £8.76 Buy Surplus As Low As £4.38 Price with VAT: £5.26
    £4.38 Price with VAT: £5.26
    WEILER 98478

    WEILER

    98478

    3 ROWS X 15 COLUMNS STEEL SCRATCH BRUSH 5-1/2" OAL, 1-1/2" TRIM LENGTH, STEEL LOOP HANDLE
    £6.57 Price with VAT: £7.88 Buy Surplus As Low As £3.94 Price with VAT: £4.73
    £3.94 Price with VAT: £4.73
    WEILER 98437

    WEILER

    98437

    5/8" DIAM 1/8" SHANK BRASS FILL CUP BRUSH CRIMPED WIRE, 0.005" WIRE DIAM, 1/4" TRIM, 37,000 MAX RPM
    £6.14 Price with VAT: £7.36 Buy Surplus As Low As £3.65 Price with VAT: £4.38
    £3.65 Price with VAT: £4.38
    WEILER 98438

    WEILER

    98438

    9/16" DIAM 1/8" SHANK HAIR FILL CUP BRUSH STRAIGHT WIRE, 0.003" WIRE DIAM, 1/4" TRIM, 37,000 MAX RPM
    £2.92 Price with VAT: £3.50 Buy Surplus As Low As £1.75 Price with VAT: £2.10
    £1.75 Price with VAT: £2.10
    WEILER 90290

    WEILER

    90290

    3/4" DIAM STEEL CRIMPED END BRUSH 7/8" TRIM LENGTH, 1/4" SHANK DIAM, 22,000 MAX RPM
    £16.63 Price with VAT: £19.95 Buy Surplus As Low As £10.58 Price with VAT: £12.70
    £10.58 Price with VAT: £12.70
    WEILER 90294

    WEILER

    90294

    1" DIAM STEEL CRIMPED END BRUSH 1" TRIM LENGTH, 1/4" SHANK DIAM, 22,000 MAX RPM
    £20.40 Price with VAT: £24.48 Buy Surplus As Low As £12.85 Price with VAT: £15.42
    £12.85 Price with VAT: £15.42
    WEILER 90307

    WEILER

    90307

    3" DIAM STAINLESS STEEL FLARED CRIMPED END BRUSH 1/4" SHANK DIAM, 16,000 MAX RPM
    £60.45 Price with VAT: £72.55 Buy Surplus As Low As £36.27 Price with VAT: £43.53
    £36.27 Price with VAT: £43.53
    WEILER 90309

    WEILER

    90309

    1-1/2" OD, 1/4" SHANK DIAM, CRIMPED STEEL WHEEL BRUSH 1/2" FACE WIDTH, 1/2" TRIM LENGTH, 0.008" FILAMENT DIAM, 20,000 RPM
    £24.18 Price with VAT: £29.02 Buy Surplus As Low As £15.11 Price with VAT: £18.14
    £15.11 Price with VAT: £18.14
    WEILER 98454

    WEILER

    98454

    3/16" DIAM STIFF HAIR END BRUSH 1/4" TRIM LENGTH, 1/8" SHANK DIAM, 37,000 MAX RPM
    £2.35 Price with VAT: £2.82 Buy Surplus As Low As £1.41 Price with VAT: £1.69
    £1.41 Price with VAT: £1.69
    WEILER 98456

    WEILER

    98456

    5/16" DIAM STIFF HAIR END BRUSH 9/16" TRIM LENGTH, 1/8" SHANK DIAM, 25,000 MAX RPM
    £4.89 Price with VAT: £5.87 Buy Surplus As Low As £2.94 Price with VAT: £3.52
    £2.94 Price with VAT: £3.52
    WEILER 98461

    WEILER

    98461

    4 ROWS X 16 COLUMNS SHOE HANDLE STAINLESS STEEL SCRATCH BRUSH 5" BRUSH LENGTH, 10" OAL, 1" TRIM LENGTH, WOOD SHOE HANDLE
    £13.60 Price with VAT: £16.32 Buy Surplus As Low As £8.31 Price with VAT: £9.98
    £8.31 Price with VAT: £9.98
    WEILER 98464

    WEILER

    98464

    4 ROWS X 18 COLUMNS CURVED HANDLE STEEL SCRATCH BRUSH 6" BRUSH LENGTH, 14" OAL, 1" TRIM LENGTH, WOOD CURVED HANDLE
    £8.31 Price with VAT: £9.98 Buy Surplus As Low As £4.99 Price with VAT: £5.99
    £4.99 Price with VAT: £5.99
    WEILER 90326

    WEILER

    90326

    1-1/8" DIAM STAINLESS STEEL KNOTTED END BRUSH 7/8" TRIM LENGTH, 1/4" SHANK DIAM, 22,000 MAX RPM
    £50.63 Price with VAT: £60.76 Buy Surplus As Low As £30.98 Price with VAT: £37.18
    £30.98 Price with VAT: £37.18
    WEILER 93639

    WEILER

    93639

    3" DIAM M10X1.50 THREADED ARBOR STEEL FILL CUP BRUSH CRIMPED WIRE, 0.014" WIRE DIAM, 7/8" TRIM, 14,000 MAX RPM
    £40.05 Price with VAT: £48.06 Buy Surplus As Low As £24.18 Price with VAT: £29.02
    £24.18 Price with VAT: £29.02
    WEILER 93643

    WEILER

    93643

    3" DIAM 5/8-11 THREADED ARBOR STEEL FILL CUP BRUSH CRIMPED WIRE, 0.014" WIRE DIAM, 7/8" TRIM, 14,000 MAX RPM
    £39.30 Price with VAT: £47.15 Buy Surplus As Low As £24.18 Price with VAT: £29.02
    £24.18 Price with VAT: £29.02
    WEILER 93654

    WEILER

    93654

    5" DIAM 5/8-11 THREADED ARBOR STEEL FILL CUP BRUSH CRIMPED WIRE, 0.02" WIRE DIAM, 1-1/4" TRIM, 8,000 MAX RPM
    £68.77 Price with VAT: £82.52 Buy Surplus As Low As £41.56 Price with VAT: £49.88
    £41.56 Price with VAT: £49.88
    WEILER 93656

    WEILER

    93656

    6" DIAM 5/8-11 THREADED ARBOR STEEL FILL CUP BRUSH CRIMPED WIRE, 0.014" WIRE DIAM, 1-1/4" TRIM, 6,600 MAX RPM
    £94.46 Price with VAT: £113.35 Buy Surplus As Low As £56.68 Price with VAT: £68.01
    £56.68 Price with VAT: £68.01
    WEILER 26971

    WEILER

    26971

    9.8MM DIAM HELICAL NYLON TUBE BRUSH SINGLE SPIRAL, 0.012" FILAMENT DIAM, 1" BRUSH LENGTH, 5" OAL, 0.147" DIAM GALVANIZED STEEL SHANK
    £13.60 Price with VAT: £16.32 Buy Surplus As Low As £8.31 Price with VAT: £9.98
    £8.31 Price with VAT: £9.98
    WEILER 41018W

    WEILER

    41018W

    ARTIST'S BRUSH 1/4"W7/8"TRIM WOOD OX HAIR FLAT MARK BRUSH
    £10.58 Price with VAT: £12.70 Buy Surplus As Low As £6.35 Price with VAT: £7.62
    £6.35 Price with VAT: £7.62
    WEILER 90286

    WEILER

    90286

    1/2" DIAM STEEL CRIMPED END BRUSH 7/8" TRIM LENGTH, 1/4" SHANK DIAM, 25,000 MAX RPM
    £15.87 Price with VAT: £19.04 Buy Surplus As Low As £9.82 Price with VAT: £11.79
    £9.82 Price with VAT: £11.79
    WEILER 93663

    WEILER

    93663

    3" OD, 1/2" ARBOR HOLE, CRIMPED STEEL WHEEL BRUSH 5/8" FACE WIDTH, 1" TRIM LENGTH, 0.0118" FILAMENT DIAM, 20,000 RPM
    £10.58 Price with VAT: £12.70 Buy Surplus As Low As £6.35 Price with VAT: £7.62
    £6.35 Price with VAT: £7.62
    WEILER 94655

    WEILER

    94655

    4" OD, M10X1.50 ARBOR HOLE, KNOTTED STAINLESS STEEL WHEEL BRUSH 3/16" FACE WIDTH, 7/8" TRIM LENGTH, 0.02" FILAMENT DIAM, 20,000 RPM
    £71.03 Price with VAT: £85.24 Buy Surplus As Low As £43.07 Price with VAT: £51.69
    £43.07 Price with VAT: £51.69
    WEILER 94661

    WEILER

    94661

    6" OD, 5/8-11 ARBOR HOLE, KNOTTED STEEL WHEEL BRUSH 3/16" FACE WIDTH, 1-3/8" TRIM LENGTH, 0.02" FILAMENT DIAM, 12,500 RPM
    £46.10 Price with VAT: £55.32 Buy Surplus As Low As £27.96 Price with VAT: £33.55
    £27.96 Price with VAT: £33.55
    WEILER 94674

    WEILER

    94674

    4" OD, 5/8-11 ARBOR HOLE, KNOTTED STAINLESS STEEL WHEEL BRUSH 1/4" FACE WIDTH, 7/8" TRIM LENGTH, 0.02" FILAMENT DIAM, 20,000 RPM
    £46.85 Price with VAT: £56.22 Buy Surplus As Low As £28.72 Price with VAT: £34.46
    £28.72 Price with VAT: £34.46
    WEILER 98539

    WEILER

    98539

    1" DIAM STEEL CRIMPED END BRUSH 1" TRIM LENGTH, 1/4" SHANK DIAM, 22,000 MAX RPM
    £29.47 Price with VAT: £35.37 Buy Surplus As Low As £18.14 Price with VAT: £21.76
    £18.14 Price with VAT: £21.76
    WEILER 93614

    WEILER

    93614

    4" OD, 5/8-11 ARBOR HOLE, CRIMPED STEEL WHEEL BRUSH 1/2" FACE WIDTH, 7/8" TRIM LENGTH, 0.014" FILAMENT DIAM, 14,000 RPM
    £22.67 Price with VAT: £27.20 Buy Surplus As Low As £13.60 Price with VAT: £16.32
    £13.60 Price with VAT: £16.32
    WEILER 93624

    WEILER

    93624

    6" OD, 2" ARBOR HOLE, CRIMPED STEEL WHEEL BRUSH 1-1/4" FACE WIDTH, 1-1/8" TRIM LENGTH, 0.0118" FILAMENT DIAM, 6,000 RPM
    £116.38 Price with VAT: £139.65 Buy Surplus As Low As £70.28 Price with VAT: £84.33
    £70.28 Price with VAT: £84.33
    WEILER 93627

    WEILER

    93627

    8" OD, 2" ARBOR HOLE, CRIMPED STEEL WHEEL BRUSH 1-1/2" FACE WIDTH, 1-3/8" TRIM LENGTH, 0.0118" FILAMENT DIAM, 4,500 RPM
    £160.96 Price with VAT: £193.15 Buy Surplus As Low As £96.73 Price with VAT: £116.07
    £96.73 Price with VAT: £116.07
    WEILER 93630

    WEILER

    93630

    7" OD, 5/8" ARBOR HOLE, CRIMPED STEEL WHEEL BRUSH 3/4" FACE WIDTH, 1-9/16" TRIM LENGTH, 0.014" FILAMENT DIAM, 6,000 RPM
    £30.98 Price with VAT: £37.18 Buy Surplus As Low As £18.89 Price with VAT: £22.67
    £18.89 Price with VAT: £22.67
    WEILER 93632

    WEILER

    93632

    7" OD, 5/8" ARBOR HOLE, CRIMPED STEEL WHEEL BRUSH 7/8" FACE WIDTH, 1-5/8" TRIM LENGTH, 0.014" FILAMENT DIAM, 6,000 RPM
    £35.52 Price with VAT: £42.62 Buy Surplus As Low As £21.91 Price with VAT: £26.30
    £21.91 Price with VAT: £26.30
    WEILER 93658

    WEILER

    93658

    1-1/2" OD, 3/8" ARBOR HOLE, CRIMPED STEEL WHEEL BRUSH 1/4" FACE WIDTH, 7/16" TRIM LENGTH, 0.0104" FILAMENT DIAM, 20,000 RPM
    £6.45 Price with VAT: £7.74 Buy Surplus As Low As £3.87 Price with VAT: £4.64
    £3.87 Price with VAT: £4.64
    WEILER 93660

    WEILER

    93660

    2" OD, 1/2" ARBOR HOLE, CRIMPED STEEL WHEEL BRUSH 3/8" FACE WIDTH, 1/2" TRIM LENGTH, 0.0118" FILAMENT DIAM, 20,000 RPM
    £10.58 Price with VAT: £12.70 Buy Surplus As Low As £6.35 Price with VAT: £7.62
    £6.35 Price with VAT: £7.62
    WEILER 26968

    WEILER

    26968

    8.3MM DIAM HELICAL NYLON TUBE BRUSH SINGLE SPIRAL, 0.012" FILAMENT DIAM, 1" BRUSH LENGTH, 5" OAL, 0.115" DIAM GALVANIZED STEEL SHANK
    £13.60 Price with VAT: £16.32 Buy Surplus As Low As £8.31 Price with VAT: £9.98
    £8.31 Price with VAT: £9.98
    WEILER 90289

    WEILER

    90289

    3/4" DIAM STEEL CRIMPED END BRUSH 7/8" TRIM LENGTH, 1/4" SHANK DIAM, 22,000 MAX RPM
    £16.63 Price with VAT: £19.95 Buy Surplus As Low As £10.58 Price with VAT: £12.70
    £10.58 Price with VAT: £12.70
    WEILER 90291

    WEILER

    90291

    3/4" DIAM STAINLESS STEEL CRIMPED END BRUSH 7/8" TRIM LENGTH, 1/4" SHANK DIAM, 22,000 MAX RPM
    £25.69 Price with VAT: £30.83 Buy Surplus As Low As £15.87 Price with VAT: £19.04
    £15.87 Price with VAT: £19.04
    WEILER 90292

    WEILER

    90292

    3/4" DIAM STAINLESS STEEL CRIMPED END BRUSH 7/8" TRIM LENGTH, 1/4" SHANK DIAM, 22,000 MAX RPM
    £23.43 Price with VAT: £28.11 Buy Surplus As Low As £14.36 Price with VAT: £17.23
    £14.36 Price with VAT: £17.23
    WEILER 90295

    WEILER

    90295

    1" DIAM STEEL CRIMPED END BRUSH 7/8" TRIM LENGTH, 1/4" SHANK DIAM, 22,000 MAX RPM
    £19.65 Price with VAT: £23.58 Buy Surplus As Low As £12.09 Price with VAT: £14.51
    £12.09 Price with VAT: £14.51
    WEILER 90301

    WEILER

    90301

    3/4" DIAM STAINLESS STEEL CRIMPED END BRUSH 7/8" TRIM LENGTH, 1/4" SHANK DIAM, 22,000 MAX RPM
    £27.96 Price with VAT: £33.55 Buy Surplus As Low As £17.38 Price with VAT: £20.86
    £17.38 Price with VAT: £20.86
    WEILER 90308

    WEILER

    90308

    1-1/4" OD, 1/4" SHANK DIAM, CRIMPED STEEL WHEEL BRUSH 1/2" FACE WIDTH, 3/8" TRIM LENGTH, 0.008" FILAMENT DIAM, 20,000 RPM
    £18.14 Price with VAT: £21.76 Buy Surplus As Low As £11.34 Price with VAT: £13.60
    £11.34 Price with VAT: £13.60
    WEILER 90310

    WEILER

    90310

    1-1/2" OD, 1/4" SHANK DIAM, CRIMPED STEEL WHEEL BRUSH 1/2" FACE WIDTH, 1/2" TRIM LENGTH, 0.0118" FILAMENT DIAM, 20,000 RPM
    £18.14 Price with VAT: £21.76 Buy Surplus As Low As £11.34 Price with VAT: £13.60
    £11.34 Price with VAT: £13.60
    WEILER 90311

    WEILER

    90311

    2" OD, 1/4" SHANK DIAM, CRIMPED STEEL WHEEL BRUSH 3/8" FACE WIDTH, 1/2" TRIM LENGTH, 0.0118" FILAMENT DIAM, 20,000 RPM
    £18.14 Price with VAT: £21.76 Buy Surplus As Low As £11.34 Price with VAT: £13.60
    £11.34 Price with VAT: £13.60
    WEILER 93621

    WEILER

    93621

    8" OD, 2" ARBOR HOLE, CRIMPED STEEL WHEEL BRUSH 1" FACE WIDTH, 1-3/8" TRIM LENGTH, 0.0104" FILAMENT DIAM, 4,500 RPM
    £58.94 Price with VAT: £70.73 Buy Surplus As Low As £35.52 Price with VAT: £42.62
    £35.52 Price with VAT: £42.62
    WEILER 93628

    WEILER

    93628

    10" OD, 2" ARBOR HOLE, CRIMPED STEEL WHEEL BRUSH 1-5/8" FACE WIDTH, 1-7/8" TRIM LENGTH, 0.0118" FILAMENT DIAM, 4,000 RPM
    £148.11 Price with VAT: £177.74 Buy Surplus As Low As £89.17 Price with VAT: £107.01
    £89.17 Price with VAT: £107.01
    Previous Next
    1 2 3 4 5 6 7 8 9 10