Product Search

    SEARCH NOW FOR ALL YOUR RADWELL SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Tools / Micro Bit

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 1-50 of 86.
    APEX TOOLS 847302

    APEX TOOLS

    CLECO

    847302

    INLINE SCREWDRIVER FINDER BIT NOSE
    ✓ IN STOCK!
    £25.81 Price with VAT: £30.98 Buy Surplus As Low As £11.29 Price with VAT: £13.54
    £11.29 Price with VAT: £13.54
    SIEMENS SAB-C501G-1RP

    SIEMENS

    SAB-C501G-1RP

    MICROCONTROLLER , 8-BIT CMOS, 12 MHZ
    ✓ IN STOCK!
    £4.99 Price with VAT: £5.99 Buy Surplus As Low As £2.40 Price with VAT: £2.88
    £2.40 Price with VAT: £2.88
    FASTENAL 53935

    FASTENAL

    53935

    SPADE BIT, 1 INCH DIA, 1 / 4 INCH HEX SHANK, 6 INCH LENGTH, HIGH SPEED STEEL
    ✓ IN STOCK!
    £4.71 Price with VAT: £5.66 Buy Surplus As Low As £2.46 Price with VAT: £2.95
    £2.46 Price with VAT: £2.95
    WIDIA PRODUCTS GROUP 9ZE5144D1

    WIDIA PRODUCTS GROUP

    WIDIA GTD

    9ZE5144D1

    DISCONTINUED BY MANUFACTURER, MILLING CARTRIDGE, MICRO BLOCK STYLE, SINGLE MOUNT
    ✓ IN STOCK!
    Buy Surplus As Low As £17.64 Price with VAT: £21.17
    £17.64 Price with VAT: £21.17
    KENNAMETAL CV50EM075375

    KENNAMETAL

    CV50EM075375

    TOOLHOLDER, END MILL ADAPTER, 0.75" CUTTING TOOL SHANK DIAMETER, 3.75" GAGE LENGTH
    ✓ IN STOCK!
    £147.81 Price with VAT: £177.37 Buy Surplus As Low As £87.80 Price with VAT: £105.36
    £87.80 Price with VAT: £105.36
    FASTENAL 53933

    FASTENAL

    53933

    SPADE BIT, 3 / 4 INCH, 1 / 4 INCH SHANK, 6 INCH LENGTH, TITANIUM NITRIDE COATED
    ✓ IN STOCK!
    £4.04 Price with VAT: £4.85 Buy Surplus As Low As £2.11 Price with VAT: £2.54
    £2.11 Price with VAT: £2.54
    FASTENAL 53934

    FASTENAL

    53934

    SPADE BIT, 7 / 8 INCH DIAMETER, 6 INCH LENGTH,1 / 4 INCH HEX SHANK HIGH SPEED STEEL
    ✓ IN STOCK!
    £4.04 Price with VAT: £4.85 Buy Surplus As Low As £2.11 Price with VAT: £2.54
    £2.11 Price with VAT: £2.54
    INGERSOLL RAND SNJ-43-001

    INGERSOLL RAND

    SNJ-43-001

    DISCONTINUED BY MANUFACTURER, CARBIDE INSERT, SINGLE INSERT, SQUARE, GRADE IN6510
    ✓ IN STOCK!
    Buy Surplus As Low As £19.87 Price with VAT: £23.84
    £19.87 Price with VAT: £23.84
    KENNAMETAL CV50SM075350

    KENNAMETAL

    CV50SM075350

    DISCONTINUED BY MANUFACTURER, SHELL MILL TOOL HOLDER, 3/4 IN PILOT, 3.5 IN PROJECTION
    ✓ IN STOCK!
    Buy Surplus As Low As £74.55 Price with VAT: £89.46
    £74.55 Price with VAT: £89.46
    SANDVIK 392.45520-50 25 100

    SANDVIK

    392.45520-50 25 100

    DISCONTINUED BY MANUFACTURER, END MILL. COROMANT, 25 MM
    ✓ IN STOCK!
    Buy Surplus As Low As £78.93 Price with VAT: £94.72
    £78.93 Price with VAT: £94.72
    COGNEX 82100162RA

    COGNEX

    82100162RA

    MICRO BIT
    £1.43 Price with VAT: £1.71 Buy Surplus As Low As £0.86 Price with VAT: £1.03
    £0.86 Price with VAT: £1.03
    KENNAMETAL 4144191

    KENNAMETAL

    4144191

    KENNAMETAL, 4144191, BALL NOSE ENDMILL, MP 230 01 16 KCAL B1RG02
    Buy Surplus As Low As £56.02 Price with VAT: £67.23
    £56.02 Price with VAT: £67.23
    APEX TOOLS AMB2SL6-25

    APEX TOOLS

    AMB2SL6-25

    DISCONTINUED BY MANUFACTURER, BIT, POWER DRIVE, 2" SLOTTED, MODIFIED S2 STEEL MATERIAL
    Buy Surplus As Low As £0.57 Price with VAT: £0.68
    £0.57 Price with VAT: £0.68
    KENNAMETAL KG 5050CV

    KENNAMETAL

    KG 5050CV

    DISCONTINUED BY MANUFACTURER, INDEXABLE INSERT ENDMILL
    Buy Surplus As Low As £37.30 Price with VAT: £44.75
    £37.30 Price with VAT: £44.75
    SANDVIK AA3B05-50 38 061

    SANDVIK

    AA3B05-50 38 061

    SHELL MILL HOLDER, COROMANT
    £75.41 Price with VAT: £90.49 Buy Surplus As Low As £41.37 Price with VAT: £49.64
    £41.37 Price with VAT: £49.64
    CHAMPION CUTTING TOOL 515-3/16

    CHAMPION CUTTING TOOL

    515-3/16

    HSS SQUARE TOOL BITS 3/16", HIGH SPEED STEEL
    £11.95 Price with VAT: £14.34 Buy Surplus As Low As £7.17 Price with VAT: £8.60
    £7.17 Price with VAT: £8.60
    CHAMPION CUTTING TOOL 515-3/8

    CHAMPION CUTTING TOOL

    515-3/8

    HSS SQUARE TOOL BITS 3/8", HIGH SPEED STEEL
    £18.67 Price with VAT: £22.41 Buy Surplus As Low As £11.20 Price with VAT: £13.45
    £11.20 Price with VAT: £13.45
    CHAMPION CUTTING TOOL 515-1/2

    CHAMPION CUTTING TOOL

    515-1/2

    HSS SQUARE TOOL BITS 1/2", HIGH SPEED STEEL
    £35.11 Price with VAT: £42.13 Buy Surplus As Low As £21.66 Price with VAT: £25.99
    £21.66 Price with VAT: £25.99
    CHAMPION CUTTING TOOL 515-1/8

    CHAMPION CUTTING TOOL

    515-1/8

    HSS SQUARE TOOL BITS 1/8", HIGH SPEED STEEL
    £14.94 Price with VAT: £17.93 Buy Surplus As Low As £8.96 Price with VAT: £10.76
    £8.96 Price with VAT: £10.76
    CHAMPION CUTTING TOOL 515-7/16

    CHAMPION CUTTING TOOL

    515-7/16

    HSS SQUARE TOOL BITS 7/16", HIGH SPEED STEEL
    £25.40 Price with VAT: £30.48 Buy Surplus As Low As £15.69 Price with VAT: £18.82
    £15.69 Price with VAT: £18.82
    CHAMPION CUTTING TOOL 515-7/8

    CHAMPION CUTTING TOOL

    515-7/8

    HSS SQUARE TOOL BITS 7/8", HIGH SPEED STEEL
    £132.21 Price with VAT: £158.65 Buy Surplus As Low As £79.92 Price with VAT: £95.91
    £79.92 Price with VAT: £95.91
    CHAMPION CUTTING TOOL 8001-3/4

    CHAMPION CUTTING TOOL

    8001-3/4

    WOOD BORING FLAT BITS 3/4", 6" OVERALL LENGTH
    £5.92 Price with VAT: £7.10 Buy Surplus As Low As £3.55 Price with VAT: £4.26
    £3.55 Price with VAT: £4.26
    CHAMPION CUTTING TOOL C10-883

    CHAMPION CUTTING TOOL

    C10-883

    CARBIDE TIPPED SQUARE NOSE TOOL, CARBIDE TOOL BITS
    £22.41 Price with VAT: £26.89 Buy Surplus As Low As £13.45 Price with VAT: £16.13
    £13.45 Price with VAT: £16.13
    CHAMPION CUTTING TOOL 8800-18

    CHAMPION CUTTING TOOL

    8800-18

    AUGER BIT EXTENSION 18 OAL, 3/8" HEX SHANK
    £26.14 Price with VAT: £31.37 Buy Surplus As Low As £15.69 Price with VAT: £18.82
    £15.69 Price with VAT: £18.82
    CHAMPION CUTTING TOOL 8001-5/16

    CHAMPION CUTTING TOOL

    8001-5/16

    WOOD BORING FLAT BITS 5/16", 6" OVERALL LENGTH
    £5.15 Price with VAT: £6.18 Buy Surplus As Low As £3.09 Price with VAT: £3.71
    £3.09 Price with VAT: £3.71
    CHAMPION CUTTING TOOL CM-MPB-5/16

    CHAMPION CUTTING TOOL

    CM-MPB-5/16

    MULTI PURPOSE BITS- 5/16, 4" OVERALL LENGTH
    £11.20 Price with VAT: £13.45 Buy Surplus As Low As £6.72 Price with VAT: £8.07
    £6.72 Price with VAT: £8.07
    CHAMPION CUTTING TOOL C4-370

    CHAMPION CUTTING TOOL

    C4-370

    CARBIDE TIPPED SQUARE NOSE TOOL, CARBIDE TOOL BITS
    £10.46 Price with VAT: £12.55 Buy Surplus As Low As £6.27 Price with VAT: £7.53
    £6.27 Price with VAT: £7.53
    CHAMPION CUTTING TOOL 8001-7/16

    CHAMPION CUTTING TOOL

    8001-7/16

    WOOD BORING FLAT BITS 7/16", 6" OVERALL LENGTH
    £5.25 Price with VAT: £6.30 Buy Surplus As Low As £3.15 Price with VAT: £3.78
    £3.15 Price with VAT: £3.78
    CHAMPION CUTTING TOOL CM95-STOP-1/2X1-11/16

    CHAMPION CUTTING TOOL

    CM95-STOP-1/2X1-11/16

    SDS PLUS STOP BIT 1/2X1-11/16, CENTERING POINT / COLLAR STOP
    £32.87 Price with VAT: £39.44 Buy Surplus As Low As £20.17 Price with VAT: £24.20
    £20.17 Price with VAT: £24.20
    CHAMPION CUTTING TOOL CM95-STOP-3/8X1-1/16

    CHAMPION CUTTING TOOL

    CM95-STOP-3/8X1-1/16

    SDS PLUS STOP BITS 3/8X1-1/16, CENTERING POINT / COLLAR STOP
    £27.64 Price with VAT: £33.16 Buy Surplus As Low As £17.18 Price with VAT: £20.62
    £17.18 Price with VAT: £20.62
    CHAMPION CUTTING TOOL C10-370

    CHAMPION CUTTING TOOL

    C10-370

    CARBIDE TIPPED SQUARE NOSE TOOL, CARBIDE TOOL BITS
    £23.90 Price with VAT: £28.68 Buy Surplus As Low As £14.94 Price with VAT: £17.93
    £14.94 Price with VAT: £17.93
    CHAMPION CUTTING TOOL C12-883

    CHAMPION CUTTING TOOL

    C12-883

    CARBIDE TIPPED SQUARE NOSE TOOL, CARBIDE TOOL BITS
    £29.13 Price with VAT: £34.96 Buy Surplus As Low As £17.93 Price with VAT: £21.51
    £17.93 Price with VAT: £21.51
    CHAMPION CUTTING TOOL C12-370

    CHAMPION CUTTING TOOL

    C12-370

    CARBIDE TIPPED SQUARE NOSE TOOL, CARBIDE TOOL BITS
    £32.12 Price with VAT: £38.54 Buy Surplus As Low As £19.42 Price with VAT: £23.30
    £19.42 Price with VAT: £23.30
    CHAMPION CUTTING TOOL D4-370

    CHAMPION CUTTING TOOL

    D4-370

    CARBIDE TIP POINTED NOSE TOOL, CARBIDE TOOL BITS
    £10.46 Price with VAT: £12.55 Buy Surplus As Low As £6.27 Price with VAT: £7.53
    £6.27 Price with VAT: £7.53
    CHAMPION CUTTING TOOL D5-883

    CHAMPION CUTTING TOOL

    D5-883

    CARBIDE TIP POINTED NOSE TOOL, CARBIDE TOOL BITS
    £10.46 Price with VAT: £12.55 Buy Surplus As Low As £6.27 Price with VAT: £7.53
    £6.27 Price with VAT: £7.53
    CHAMPION CUTTING TOOL E12-883

    CHAMPION CUTTING TOOL

    E12-883

    CARBIDE TIPPED THREADING TOOL, CARBIDE TOOL BITS
    £24.65 Price with VAT: £29.58 Buy Surplus As Low As £14.94 Price with VAT: £17.93
    £14.94 Price with VAT: £17.93
    CHAMPION CUTTING TOOL CM-MPB-1/2

    CHAMPION CUTTING TOOL

    CM-MPB-1/2

    MULTI PURPOSE BITS- 1/2, 6" OVERALL LENGTH
    £16.43 Price with VAT: £19.72 Buy Surplus As Low As £10.46 Price with VAT: £12.55
    £10.46 Price with VAT: £12.55
    CHAMPION CUTTING TOOL CM-MPB-3/16

    CHAMPION CUTTING TOOL

    CM-MPB-3/16

    MULTI PURPOSE BITS - 3/16, 3" OVERALL LENGTH
    £6.94 Price with VAT: £8.32 Buy Surplus As Low As £4.16 Price with VAT: £4.99
    £4.16 Price with VAT: £4.99
    CHAMPION CUTTING TOOL CM95-STOP-5/8X1-1/16

    CHAMPION CUTTING TOOL

    CM95-STOP-5/8X1-1/16

    SDS PLUS STOP BITS 5/8X1-1/16, CENTERING POINT / COLLAR STOP
    £34.36 Price with VAT: £41.23 Buy Surplus As Low As £20.91 Price with VAT: £25.10
    £20.91 Price with VAT: £25.10
    CHAMPION CUTTING TOOL 8001-1/4

    CHAMPION CUTTING TOOL

    8001-1/4

    WOOD BORING FLAT BITS 1/4", 6" OVERALL LENGTH
    £5.15 Price with VAT: £6.18 Buy Surplus As Low As £3.09 Price with VAT: £3.71
    £3.09 Price with VAT: £3.71
    CHAMPION CUTTING TOOL D12-883

    CHAMPION CUTTING TOOL

    D12-883

    CARBIDE TIP POINTED NOSE TOOL, CARBIDE TOOL BITS
    £24.65 Price with VAT: £29.58 Buy Surplus As Low As £14.94 Price with VAT: £17.93
    £14.94 Price with VAT: £17.93
    CHAMPION CUTTING TOOL D16-883

    CHAMPION CUTTING TOOL

    D16-883

    CARBIDE TIP POINTED NOSE TOOL, CARBIDE TOOL BITS
    £35.85 Price with VAT: £43.02 Buy Surplus As Low As £21.66 Price with VAT: £25.99
    £21.66 Price with VAT: £25.99
    CHAMPION CUTTING TOOL E8-370

    CHAMPION CUTTING TOOL

    E8-370

    CARBIDE TIPPED THREADING TOOL, CARBIDE TOOL BITS
    £14.94 Price with VAT: £17.93 Buy Surplus As Low As £8.96 Price with VAT: £10.76
    £8.96 Price with VAT: £10.76
    CHAMPION CUTTING TOOL D4-883

    CHAMPION CUTTING TOOL

    D4-883

    CARBIDE TIP POINTED NOSE TOOL, CARBIDE TOOL BITS
    £10.46 Price with VAT: £12.55 Buy Surplus As Low As £6.27 Price with VAT: £7.53
    £6.27 Price with VAT: £7.53
    CHAMPION CUTTING TOOL D8-370

    CHAMPION CUTTING TOOL

    D8-370

    CARBIDE TIP POINTED NOSE TOOL, CARBIDE TOOL BITS
    £14.94 Price with VAT: £17.93 Buy Surplus As Low As £8.96 Price with VAT: £10.76
    £8.96 Price with VAT: £10.76
    CHAMPION CUTTING TOOL D6-370

    CHAMPION CUTTING TOOL

    D6-370

    CARBIDE TIP POINTED NOSE TOOL, CARBIDE TOOL BITS
    £11.95 Price with VAT: £14.34 Buy Surplus As Low As £7.17 Price with VAT: £8.60
    £7.17 Price with VAT: £8.60
    CHAMPION CUTTING TOOL E4-883

    CHAMPION CUTTING TOOL

    E4-883

    CARBIDE TIPPED THREADING TOOL, CARBIDE TOOL BITS
    £10.46 Price with VAT: £12.55 Buy Surplus As Low As £6.27 Price with VAT: £7.53
    £6.27 Price with VAT: £7.53
    CHAMPION CUTTING TOOL E6-883

    CHAMPION CUTTING TOOL

    E6-883

    CARBIDE TIPPED THREADING TOOL, CARBIDE TOOL BITS
    £11.20 Price with VAT: £13.45 Buy Surplus As Low As £6.72 Price with VAT: £8.07
    £6.72 Price with VAT: £8.07
    CHAMPION CUTTING TOOL 8001-13/16

    CHAMPION CUTTING TOOL

    8001-13/16

    WOOD BORING FLAT BITS 13/16", 6" OVERALL LENGTH
    £5.92 Price with VAT: £7.10 Buy Surplus As Low As £3.55 Price with VAT: £4.26
    £3.55 Price with VAT: £4.26
    CHAMPION CUTTING TOOL C20-370

    CHAMPION CUTTING TOOL

    C20-370

    CARBIDE TIPPED SQUARE NOSE TOOL, CARBIDE TOOL BITS
    £77.68 Price with VAT: £93.22 Buy Surplus As Low As £47.06 Price with VAT: £56.47
    £47.06 Price with VAT: £56.47
    Next
    1 2