SEARCH NOW FOR ALL YOUR RADWELL SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Cutting HSS & Solid Carbide / Tap
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
071043
8-32TTD NC THUNDERTAP TPR-12/CLAM
£5.78
Price with VAT:
£6.94
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
071046
10-32TTD*NF THUNDERTAP TPR-12/CLAM
£5.78
Price with VAT:
£6.94
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
071048
12-28 NF TAPER THUNDER TAP-12 PER SNAP P
£6.23
Price with VAT:
£7.48
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
071061
1/4-28TTD NF THUNDERTAP PLUG-6/CLAM
£4.89
Price with VAT:
£5.87
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
071062
5/16-18TTD NC THUNDERTAP PLUG-6/CLAM
£6.23
Price with VAT:
£7.48
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
071095
10-24TTD NC THUNDERTAP PLUG-12/CLAM
£5.78
Price with VAT:
£6.94
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
071096
10-32TTD NF THUNDERTAP PLUG-12/CLAM
£5.78
Price with VAT:
£6.94
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
071100
1/4-20TTD NC THUNDERTAP BOTTOM-6/CLAM
£4.89
Price with VAT:
£5.87
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
071102
5/16-18TTD NC THUNDERTAP BOTTO-6/CLAM
£6.23
Price with VAT:
£7.48
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
071148
12-28NFBOTTOMINGTHNERTAP-12PERSNAPP
£6.23
Price with VAT:
£7.48
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
071202
5/16-18TTD*NC THUNDERTAP SPIRA-6/CLAM
£6.67
Price with VAT:
£8.01
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
071204
3/8-16TTD*NC THUNDERTAP SPIRAL-6/CLAM
£8.16
Price with VAT:
£9.79
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
071207
7/16-20TTD*NF THUNDERTAP SPIRA-3/CLAM
£14.09
Price with VAT:
£16.91
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
071208
1/2-13TTD*NC THUNDERTAP SPIRAL-3/CLAM
£13.35
Price with VAT:
£16.02
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
071497
SETTTD 18PC NC THUNDERTAP & DR-L
£84.54
Price with VAT:
£101.45
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
071603
5/16-24NF 3 PC. TTAP SET-TAPER, PLUG,
£17.80
Price with VAT:
£21.36
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
071605
3/8-24 NF 3 PC. TTAP SET-TAPER, PLUG,
£18.54
Price with VAT:
£22.25
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
071607
7/16-20 NF 3 PC. TTAP SET-TAPER, PLUG,
£34.11
Price with VAT:
£40.94
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
071608
1/2-13 NC 3 PC TTAP SET-TAPER, PLUG,
£33.37
Price with VAT:
£40.05
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
072292
1-1/8TAPEREDALIGNMENTREAMER-BLACKANDGOL
£113.46
Price with VAT:
£136.15
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
072294
1-1/4TAPEREDALIGNMENTREAMER-BLACKANDGOL
£132.74
Price with VAT:
£159.29
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
075089
M16 X 1.5 METRIC T.TAP-BOTTOM
£24.47
Price with VAT:
£29.37
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
075153
M4X0.7 HSG D4 4FL TAP SET-0
£17.06
Price with VAT:
£20.47
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
075156
M7X1 HSG D5 4FL TAP SET-0
£20.76
Price with VAT:
£24.92
WALTER SURFACE TECHNOLOGIES
TRIUMPH TWIST DRILL
075157
M8X1.25 HSG D5 4FL TAP SET-0
£20.76
Price with VAT:
£24.92
DORMER
5974145
SPIRAL POINT TAP: 3/8-16 UNC, 3 FLUTES, PLUG CHAMFER, 3B CLASS OF FIT, HIGH-SPEED STEEL-E-PM, STEAM OXIDE COATED 0.6020" THREAD LENGTH, 2-15/16" OAL, RIGHT HAND, H3, SERIES E026 (MOQ=1, PKG ...
£14.83
Price with VAT:
£17.80
EMUGE
2644T.012
ROUGHING & FINISHING END MILL: 12 MM DIA, 5 FLUTES, SQUARE END, SOLID CARBIDE 36 MM LOC, 93 MM OAL, 12 MM SHANK DIA, 42 ° HELIX, TIN/TIALN COATED, SERIES 2644T (MOQ=1, PKG QTY=1)
£146.09
Price with VAT:
£175.31
EMUGE
3440L.08020A
TAPERED END MILL: 8 DEG ANGLE PER SIDE, 6.71 MM SMALL DIA, 23.00 MM LOC, 3 FLUTE, SOLID CARBIDE, BALL END 10.00 MM SHANK DIA, 72.00 MM OAL, ALCR COATED, SERIES 3440L (MOQ=1, PKG QTY=1)
£119.39
Price with VAT:
£143.27
EMUGE
AU203000.0080
SPIRAL POINT TAP: M8 X 1.25, METRIC COARSE, 3 FLUTES, PLUG, 6H, COBALT, NITRIDE FINISH 0.787" THREAD LENGTH, 2-23/32" OAL, RIGHT HAND, SERIES REKORD B (MOQ=1, PKG QTY=1)
£37.82
Price with VAT:
£45.38
EMUGE
AU203010.5009
SPIRAL POINT TAP: 1/4-20, UNC, 3 FLUTES, PLUG, 3B, COBALT, NITRIDE FINISH 0.669" THREAD LENGTH, 2-1/2" OAL, RIGHT HAND, SERIES REKORD B (MOQ=1, PKG QTY=1)
£30.40
Price with VAT:
£36.49
EMUGE
AU306011.5043
SPIRAL FLUTE TAP: 1/4-28 UNF, 3 FLUTES, PLUG, 3BX CLASS OF FIT, COBALT, OXIDE COATED 0.669" THREAD LENGTH, 2-1/2" OAL, RIGHT HAND THREAD, SERIES REKORD C (MOQ=1, PKG QTY=1)
£37.82
Price with VAT:
£45.38
EMUGE
B0911400.0050
THREAD FORMING TAP: METRIC, 6HX CLASS OF FIT, MODIFIED BOTTOMING, HIGH-SPEED STEEL-E, TITANIUM NITRIDE COATED 2.7559" OAL, SERIES B0911400 (MOQ=1, PKG QTY=1)
£34.85
Price with VAT:
£41.83
EMUGE
B0911400.0229
THREAD FORMING TAP: M6X0.75 METRIC FINE, 6HX CLASS OF FIT, MODIFIED BOTTOMING, COBALT, TIN COATED 13 MM THREAD LENGTH, 80 MM OAL, SERIES DRUCK (MOQ=1, PKG QTY=1)
£83.80
Price with VAT:
£100.56
EMUGE
B529Z700.0040
THREAD FORMING TAP: M4X0.70 METRIC, 6H CLASS OF FIT, FORM TAP, POWDERED METAL HIGH SPEED STEEL, TIN-80 COATED D4, SERIES B529Z700 (MOQ=1, PKG QTY=1)
£63.78
Price with VAT:
£76.53
EMUGE
BU20C300.5000
SPIRAL POINT TAP: #1-64 UNC, 2 FLUTES, PLUG CHAMFER, 2B CLASS OF FIT, HIGH-SPEED STEEL-E, GLT-1 COATED 7.00 MM THREAD LENGTH, 45.00 MM OAL, RIGHT HAND, H3, SERIES BU20C300 (MOQ=1, PKG QTY=1)
£48.20
Price with VAT:
£57.84
EMUGE
BU20K560.5011
SPIRAL POINT TAP: 3/8-16 UNC, 3 FLUTES, 4 TO 5P, 3B CLASS OF FIT, HSS-E, GLT-1 COATED 100 MM OAL, LEFT HAND, X, SERIES REKORD B (MOQ=1, PKG QTY=1)
£54.88
Price with VAT:
£65.85
EMUGE
BU20K560.5043
SPIRAL POINT TAP: 1/4-28 UNF, 3 FLUTES, 4 TO 5P, 3B CLASS OF FIT, HSS-E, GLT-1 COATED 80 MM OAL, LEFT HAND, X, SERIES REKORD B (MOQ=1, PKG QTY=1)
£43.75
Price with VAT:
£52.50
EMUGE
BU309611.5009
SPIRAL FLUTE TAP: 1/4-20 UNC, 3 FLUTES, PLUG, 3BX CLASS OF FIT, COBALT, TICN COATED 0.669" THREAD LENGTH, 3.15" OAL, RIGHT HAND THREAD, SERIES REKORD C (MOQ=1, PKG QTY=1)
£42.27
Price with VAT:
£50.72
EMUGE
BU30J411.5006
SPIRAL FLUTE TAP: #8-32 UNC, 3 FLUTES, PLUG, 3BX CLASS OF FIT, COBALT, TICN COATED 0.512" THREAD LENGTH, 2.48" OAL, RIGHT HAND THREAD, SERIES REKORD C (MOQ=1, PKG QTY=1)
£37.08
Price with VAT:
£44.50
EMUGE
BU39Z700.5003
THREAD FORMING TAP: #4-40 UNC, 2BX CLASS OF FIT, BOTTOMING, POWDERED METAL HIGH SPEED STEEL, TIN COATED 56 MM OAL, H3 (MOQ=1, PKG QTY=1)
£46.72
Price with VAT:
£56.06
EMUGE
BU39Z700.5043
THREAD FORMING TAP: 1/4-28 UNF, 2BX CLASS OF FIT, BOTTOMING, HIGH-SPEED STEEL-E-PM, TIN-80 COATED 3.1496" OAL, H4, SERIES BU39Z700 (MOQ=1, PKG QTY=1)
£48.94
Price with VAT:
£58.73
EMUGE
BU446A00.5010
THREAD FORMING TAP: 5/16-18 UNC, 2B CLASS OF FIT, FORM TAP, POWDERED METAL HIGH SPEED STEEL, TIN-T26 COATED 0.551" THREAD LENGTH, 3.543" OAL, H5, SERIES BU446A00 (MOQ=1, PKG QTY=1)
£70.45
Price with VAT:
£84.54
EMUGE
BU446A00.5011
THREAD FORMING TAP: 3/8-16 UNC, 2BX CLASS OF FIT, BOTTOMING, POWDERED METAL HIGH SPEED STEEL, TIN-T26 COATED 0.63" THREAD LENGTH, 100 MM OAL, H5, SERIES BU446A00 (MOQ=1, PKG QTY=1)
£67.48
Price with VAT:
£80.98
EMUGE
BU451400.5009
SPIRAL FLUTE TAP: 1/4-20 UNC, 2 FLUTES, MODIFIED BOTTOMING, 2B CLASS OF FIT, COBALT, TIN COATED 0.669" THREAD LENGTH, 3.15" OAL, RIGHT HAND THREAD, SERIES REKORD D (MOQ=1, PKG QTY=1)
£40.05
Price with VAT:
£48.05
EMUGE
BU50C460.5011
SPIRAL FLUTE TAP: 3/8-16, UNC, 3 FLUTE, 2-3 P, 3B CLASS OF FIT, HIGH SPEED STEEL-E, GLT-1 FINISH 3.937" OAL, LEFT HAND FLUTE, LEFT HAND THREAD, X, SERIES ENORM Z (MOQ=1, PKG QTY=1)
£60.07
Price with VAT:
£72.08
EMUGE
BU50S800.5033
SPIRAL FLUTE TAP: #0-80 UNF, 2 FLUTES, MODIFIED BOTTOMING, 2B CLASS OF FIT, COBALT, GLT-8 COATED 1.626" OAL, RIGHT HAND THREAD, H2, SERIES BU50S800 (MOQ=1, PKG QTY=1)
£48.94
Price with VAT:
£58.73
EMUGE
BU513710.5611
SPIRAL POINT STI TAP: #4-40 UNC, 3 FLUTES, BOTTOMING, COBALT, TIN FINISH 1/4" THREAD LENGTH, H2, 3B CLASS OF FIT, SERIES BU513710 (MOQ=1, PKG QTY=1)
£40.79
Price with VAT:
£48.94
EMUGE
BU51C400.5010
SPIRAL FLUTE TAP: 5/16-18 UNC, 3 FLUTES, MODIFIED BOTTOMING, 2B CLASS OF FIT, COBALT, GLT-1 COATED 0.551" THREAD LENGTH, 3.543" OAL, RIGHT HAND THREAD, SERIES ENORM (MOQ=1, PKG QTY=1)
£48.20
Price with VAT:
£57.84
EMUGE
BU539300.5010
SPIRAL FLUTE TAP: UNC, 3 FLUTE, BOTTOMING, 2B/3B CLASS OF FIT, HIGH-SPEED STEEL-E, TICN FINISH RIGHT HAND FLUTE, RIGHT HAND THREAD, (MOQ=1, PKG QTY=1)
£25.96
Price with VAT:
£31.15