Product Search

    SEARCH NOW FOR ALL YOUR RADWELL SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Cutting Indexables / Turning Tool Holder

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 1-50 of 128.
    KENNAMETAL BT1872782

    KENNAMETAL

    BT1872782

    TOOL HOLDER LATHE TURN BROACH
    ✓ IN STOCK!
    £8.96 Price with VAT: £10.76 Buy Surplus As Low As £8.07 Price with VAT: £9.68
    £8.07 Price with VAT: £9.68
    MEDA 243-5012

    MEDA

    243-5012

    TOOL HOLDER 5/16X3/4X4-1/2IN 3/16BIT STRAIGHT 00-S
    ✓ IN STOCK!
    £8.74 Price with VAT: £10.49 Buy Surplus As Low As £5.00 Price with VAT: £6.00
    £5.00 Price with VAT: £6.00
    SANDVIK 435-100211-R47

    SANDVIK

    435-100211-R47

    SANDVIK, 435-100211-R47, 435100211R47, TOOL HOLDER, MILLING, STEEL,
    ✓ IN STOCK!
    £39.26 Price with VAT: £47.11 Buy Surplus As Low As £18.89 Price with VAT: £22.67
    £18.89 Price with VAT: £22.67
    SCHUNK 0201975

    SCHUNK

    0201975

    ROTARY TOOL HOLDER
    ✓ IN STOCK!
    £117.47 Price with VAT: £140.96 Buy Surplus As Low As £72.31 Price with VAT: £86.78
    £72.31 Price with VAT: £86.78
    KYOCERA XA90190BPTR4232-16

    KYOCERA

    XA90190BPTR4232-16

    DISCONTINUED BY MANUFACTURER, TOOL HOLDER,
    ✓ IN STOCK!
    Buy Surplus As Low As £80.45 Price with VAT: £96.54
    £80.45 Price with VAT: £96.54
    REGO FIX 1108.02000.109

    REGO FIX

    1108.02000.109

    DISCONTINUED BY MANUFACTURER, ER8 COLLET, 2.00MM, 1/16IN,
    ✓ IN STOCK!
    Buy Surplus As Low As £8.93 Price with VAT: £10.72
    £8.93 Price with VAT: £10.72
    REGO FIX 113204000.27

    REGO FIX

    113204000.27

    DISCONTINUED BY MANUFACTURER, ER32 COLLET, 4.00MM, 5/32IN
    ✓ IN STOCK!
    Buy Surplus As Low As £19.41 Price with VAT: £23.29
    £19.41 Price with VAT: £23.29
    SANDVIK PTFNL2020

    SANDVIK

    PTFNL2020

    DISCONTINUED BY MANUFACTURER, CUTTING INDEXABLE, TURNING TOOL HOLDER, LEVER LOCK STYLE, FOR FACING 91 DEGREE APPROACH ANGLE, NEGATIVE TRIANGLE INSERTS, LEFT HANDED
    Buy Surplus As Low As £39.99 Price with VAT: £47.99
    £39.99 Price with VAT: £47.99
    KYOCERA MVLNR2020-16

    KYOCERA

    MVLNR2020-16

    TURNING TOOL HOLDER
    ✓ IN STOCK!
    £183.93 Price with VAT: £220.72 Buy Surplus As Low As £109.26 Price with VAT: £131.11
    £109.26 Price with VAT: £131.11
    KYOCERA WWLNR2525M-08

    KYOCERA

    WWLNR2525M-08

    TURNING HOLDER, HEXAGONAL TIP, WEDGE LOCK, RIGHT-HAND
    ✓ IN STOCK!
    £194.93 Price with VAT: £233.92 Buy Surplus As Low As £121.48 Price with VAT: £145.77
    £121.48 Price with VAT: £145.77
    KYOCERA S25X-CCLNL09-30A

    KYOCERA

    S25X-CCLNL09-30A

    TOOL HOLDER
    ✓ IN STOCK!
    £330.90 Price with VAT: £397.08 Buy Surplus As Low As £203.90 Price with VAT: £244.68
    £203.90 Price with VAT: £244.68
    KYOCERA CSSNL2525M-12

    KYOCERA

    CSSNL2525M-12

    TURNING HOLDER, RECTANGULAR TIP, CLAMP-ON CLAMP, LEFT-HAND
    ✓ IN STOCK!
    £124.11 Price with VAT: £148.93 Buy Surplus As Low As £76.23 Price with VAT: £91.48
    £76.23 Price with VAT: £91.48
    TUNGALOY 6806025

    TUNGALOY

    6806025

    MULTI-CLAMP BORING BAR, FOR NEGATIVE 80DEG RHOMBIC INSERT, 25MM CONNECTION DIAMETER MACHINE SIDE
    ✓ IN STOCK!
    £436.22 Price with VAT: £523.47 Buy Surplus As Low As £283.27 Price with VAT: £339.92
    £283.27 Price with VAT: £339.92
    TUNGALOY 6802720

    TUNGALOY

    6802720

    TOOLHOLDER, RIGHT HAND, 20.00 MM SHANK WIDTH / HEIGHT, CTWR2020-3
    ✓ IN STOCK!
    £246.06 Price with VAT: £295.27 Buy Surplus As Low As £129.61 Price with VAT: £155.53
    £129.61 Price with VAT: £155.53
    MEDA 244-5012

    MEDA

    244-5012

    TOOL HOLDER SMALL LATHE LEFT HAND MODEL 00-L
    ✓ IN STOCK!
    £6.57 Price with VAT: £7.88 Buy Surplus As Low As £5.77 Price with VAT: £6.92
    £5.77 Price with VAT: £6.92
    SANDVIK 393-CGS-12-08-40

    SANDVIK

    393-CGS-12-08-40

    CYLINDRICAL COLLET FOR HYDRAULIC MEMBRANE CHUCKS, WITH FLANGE -SIZE 12
    ✓ IN STOCK!
    £155.93 Price with VAT: £187.11 Buy Surplus As Low As £75.76 Price with VAT: £90.92
    £75.76 Price with VAT: £90.92
    KENNAMETAL 1097128

    KENNAMETAL

    1097128

    INDEXABLE PROFILING TOOLHOLDER: EXTERNAL, 17.5 ° LEAD ANGLE, (MOQ=1, PKG QTY=1)1097128
    ✓ IN STOCK!
    £148.64 Price with VAT: £178.37 Buy Surplus As Low As £102.18 Price with VAT: £122.62
    £102.18 Price with VAT: £122.62
    KYOCERA X1817BT4032-16

    KYOCERA

    X1817BT4032-16

    DISCONTINUED BY MANUFACTURER, TOOL HOLDER
    ✓ IN STOCK!
    Buy Surplus As Low As £75.98 Price with VAT: £91.18
    £75.98 Price with VAT: £91.18
    REGO FIX 1111.04500.128

    REGO FIX

    1111.04500.128

    DISCONTINUED BY MANUFACTURER, ER11 COLLET, 4.50MM,
    ✓ IN STOCK!
    Buy Surplus As Low As £8.15 Price with VAT: £9.78
    £8.15 Price with VAT: £9.78
    TIDLAND 530527

    TIDLAND

    530527

    DISCONTINUED BY MANUFACTURER, AUTOMATIC CONTROL BODY, CLASS II, FOR USE WITH PS SWING AUTOMATIC SHEAR, PS SWING AUTOMATIC SHEAR WITH 360 DEGREE BLADE GUARD-PNEUMATIC/ MECHANICAL, AND PS CRUS ...
    ✓ IN STOCK!
    Buy Surplus As Low As £448.99 Price with VAT: £538.79
    £448.99 Price with VAT: £538.79
    Repair Yours £383.59 Price with VAT: £460.31
    SANDVIK SL70-CRDCL-18-09

    SANDVIK

    SL70-CRDCL-18-09

    T-MAX HEAD FOR TURNING, SIZE 70, 18 MM HEAD LENGTH, RIGHT HAND MODULAR
    ✓ IN STOCK!
    £482.72 Price with VAT: £579.26 Buy Surplus As Low As £223.47 Price with VAT: £268.17
    £223.47 Price with VAT: £268.17
    SECO TOOLS 00036450

    SECO TOOLS

    00036450

    INDEXABLE TURNING TOOL HOLDER, RIGHT HAND, 41.3 MM HEAD LENGTH, 15 DEGREE LEAD ANGLE, 11.2 MM SHANK
    ✓ IN STOCK!
    £278.86 Price with VAT: £334.63 Buy Surplus As Low As £117.71 Price with VAT: £141.26
    £117.71 Price with VAT: £141.26
    KENNAMETAL MCLNR124B

    KENNAMETAL

    HERTEL

    MCLNR124B

    INDEXABLE TURNING TOOLHOLDER, 3/4IN X 3/4IN SHANK, SCREW CLAMP, RIGHT HAND,
    ✓ IN STOCK!
    £142.67 Price with VAT: £171.20 Buy Surplus As Low As £88.33 Price with VAT: £106.00
    £88.33 Price with VAT: £106.00
    KYOCERA WTKNL2020K-16N

    KYOCERA

    WTKNL2020K-16N

    TURNING HOLDER, TRIANGLE TIP, WEDGE LOCK CLAMP, LEFT-HAND
    ✓ IN STOCK!
    £126.98 Price with VAT: £152.38 Buy Surplus As Low As £79.47 Price with VAT: £95.36
    £79.47 Price with VAT: £95.36
    KYOCERA S20Q-PCLNL09-27

    KYOCERA

    S20Q-PCLNL09-27

    INNER DIAMETER/INNER END FACE MACHINING, LEVER LOCK CLAMP, LEFT-HAND
    ✓ IN STOCK!
    £266.19 Price with VAT: £319.43 Buy Surplus As Low As £163.36 Price with VAT: £196.03
    £163.36 Price with VAT: £196.03
    KYOCERA PSSNL2525M-12

    KYOCERA

    PSSNL2525M-12

    TURNING HOLDER, LEVER LOCK CLAMP, LEFT-HAND
    ✓ IN STOCK!
    £116.53 Price with VAT: £139.83 Buy Surplus As Low As £72.00 Price with VAT: £86.40
    £72.00 Price with VAT: £86.40
    SUMITOMO PSDN N202043

    SUMITOMO

    PSDN N202043

    TOOL HOLDER, PSDN TYPE, 45 DEGREE ANGLE, 125MM LENGTH, 20MM HEIGHT/WIDTH, SEC-70 TYPE BIT
    ✓ IN STOCK!
    £94.12 Price with VAT: £112.94 Buy Surplus As Low As £58.08 Price with VAT: £69.70
    £58.08 Price with VAT: £69.70
    MENCOM MCTP-VH6-8

    MENCOM

    MCTP-VH6-8

    LOCATOR FOR MCVH CONTACTS
    £206.00 Price with VAT: £247.20 Buy New £206.00 Price with VAT: £247.20
    £124.00 Price with VAT: £148.80
    KENNAMETAL A3SSR200832

    KENNAMETAL

    A3SSR200832

    GROOVING TOOLHOLDER 1-1/4X1-1/4X6-1.8
    £118.83 Price with VAT: £142.59 Buy Surplus As Low As £63.55 Price with VAT: £76.26
    £63.55 Price with VAT: £76.26
    KENNAMETAL 6316-2592CHGC

    KENNAMETAL

    6316-2592CHGC

    KENNAMETAL, 6316-2592CHGC, 63162592CHGC, 1083570, INDEXABLE TURNING TOOLHOLDER
    Buy Surplus As Low As £73.95 Price with VAT: £88.74
    £73.95 Price with VAT: £88.74
    IPR ROBOTICS TK-160-T

    IPR ROBOTICS

    TK-160-T

    TOOL CHANGER, TOOL SIDE, PNEUMATIC, ISO 160, HANDLING WEIGHT: 250 KG
    £1,431.44 Price with VAT: £1,717.73 Buy Surplus As Low As £859.46 Price with VAT: £1,031.35
    £859.46 Price with VAT: £1,031.35
    TIDLAND 524508

    TIDLAND

    524508

    DISCONTINUED BY MANUFACTURER, AUTOMATIC BLADE CARTRIDGE, CLASS II, PS SWING AUTOMATIC SHEAR
    Buy Surplus As Low As £222.07 Price with VAT: £266.48
    £222.07 Price with VAT: £266.48
    Repair Yours £184.86 Price with VAT: £221.83
    ALORIS BXA HA

    ALORIS

    BXA HA

    HOLDER HEIGHT ADJUSTMENT ASSEMBLY USE WITH SERIES BXA (MOQ=1, PKG QTY=1)
    £26.14 Price with VAT: £31.37 Buy Surplus As Low As £15.69 Price with VAT: £18.82
    £15.69 Price with VAT: £18.82
    MICHIGAN DRILL EH3T

    MICHIGAN DRILL

    APT USA

    EH3T

    1 INCH HOLDER, 3MT SHANK TAPER, 10 INCH OVERALL LENGTH, PILOT HOLDER SERIES E (MOQ=1, PKG QTY=1)
    £116.53 Price with VAT: £139.83 Buy Surplus As Low As £70.21 Price with VAT: £84.26
    £70.21 Price with VAT: £84.26
    PARLEC C50-10SF394-9

    PARLEC

    C50-10SF394-9

    CAT50 TAPER SHANK, 1" HOLE DIAM, SHRINK-FIT TOOL HOLDER/ADAPTER 100.08MM PROJECTION, 43.94MM NOSE DIAM, 2.28" CLAMPING DEPTH, 15,000 RPM, THROUGH COOLANT
    £309.28 Price with VAT: £371.14 Buy Surplus As Low As £188.64 Price with VAT: £226.36
    £188.64 Price with VAT: £226.36
    ISCAR 3202505

    ISCAR

    3202505

    REPLACEABLE-TIP DRILL, 0.433 TO 0.449" DIA, 0.65" MAX DEPTH, 5/8" WELDON FLAT SHANK USES FCP/ICK/ICK-2M/ICM/ICN/ICP/ICP-2M INSERTS, SEAT SIZE 11, 3.19" OAL, THROUGH COOLANT
    £253.96 Price with VAT: £304.76 Buy Surplus As Low As £152.38 Price with VAT: £182.85
    £152.38 Price with VAT: £182.85
    RENISHAW R-T-230-20

    RENISHAW

    R-T-230-20

    2.0" SQ. X 30" TOWER
    £1,355.72 Price with VAT: £1,626.87 Buy Surplus As Low As £813.43 Price with VAT: £976.12
    £813.43 Price with VAT: £976.12
    RENISHAW R-T-50600-8

    RENISHAW

    R-T-50600-8

    M8 T H600 A152 B50 AL
    £1,085.33 Price with VAT: £1,302.39 Buy Surplus As Low As £651.34 Price with VAT: £781.61
    £651.34 Price with VAT: £781.61
    RENISHAW R-T-25150-6

    RENISHAW

    R-T-25150-6

    M6 T H150 A127 B25 AL
    £298.78 Price with VAT: £358.54 Buy Surplus As Low As £179.27 Price with VAT: £215.12
    £179.27 Price with VAT: £215.12
    RENISHAW R-T-50600-6

    RENISHAW

    R-T-50600-6

    M6 T H600 A152 B50 AL
    £1,085.33 Price with VAT: £1,302.39 Buy Surplus As Low As £651.34 Price with VAT: £781.61
    £651.34 Price with VAT: £781.61
    RENISHAW R-T-35450-8

    RENISHAW

    R-T-35450-8

    M8 T H450 A152 B35 AL
    £787.29 Price with VAT: £944.75 Buy Surplus As Low As £472.82 Price with VAT: £567.39
    £472.82 Price with VAT: £567.39
    RENISHAW R-T-25300-8

    RENISHAW

    R-T-25300-8

    M8 T H300 A127 B25 AL
    £407.09 Price with VAT: £488.51 Buy Surplus As Low As £244.25 Price with VAT: £293.11
    £244.25 Price with VAT: £293.11
    RENISHAW R-T-35300-8

    RENISHAW

    R-T-35300-8

    M8 T H300 A152 B35 AL
    £611.01 Price with VAT: £733.21 Buy Surplus As Low As £366.75 Price with VAT: £440.11
    £366.75 Price with VAT: £440.11
    RENISHAW R-T-35450-6

    RENISHAW

    R-T-35450-6

    M6 T H450 A152 B35 AL
    £787.29 Price with VAT: £944.75 Buy Surplus As Low As £472.82 Price with VAT: £567.39
    £472.82 Price with VAT: £567.39
    RENISHAW R-T-50750-6

    RENISHAW

    R-T-50750-6

    M6 T H600 A152 B50 AL
    £1,355.72 Price with VAT: £1,626.87 Buy Surplus As Low As £813.43 Price with VAT: £976.12
    £813.43 Price with VAT: £976.12
    LYNDEX CORP BT40-SF0187-3.54

    LYNDEX CORP

    BT40-SF0187-3.54

    SHRINK-FIT TOOL HOLDERS & ADAPTERS; UNSPSC CODE: 27112809 (MOQ=1, PKG QTY=1)
    £675.99 Price with VAT: £811.19 Buy Surplus As Low As £405.60 Price with VAT: £486.72
    £405.60 Price with VAT: £486.72
    LYNDEX CORP NCAT40-SF0312-3.15CP

    LYNDEX CORP

    NCAT40-SF0312-3.15CP

    SHRINK-FIT TOOL HOLDER & ADAPTER: NCAT40 FLANGE SHANK (MOQ=1, PKG QTY=1)
    £382.44 Price with VAT: £458.93 Buy Surplus As Low As £230.06 Price with VAT: £276.07
    £230.06 Price with VAT: £276.07
    LYNDEX CORP NCAT40-SF0375-3.15CP

    LYNDEX CORP

    NCAT40-SF0375-3.15CP

    SHRINK-FIT TOOL HOLDER & ADAPTER: NCAT40 FLANGE SHANK (MOQ=1, PKG QTY=1)
    £382.44 Price with VAT: £458.93 Buy Surplus As Low As £230.06 Price with VAT: £276.07
    £230.06 Price with VAT: £276.07
    LYNDEX CORP NCAT40-SF0375-6.30CP

    LYNDEX CORP

    NCAT40-SF0375-6.30CP

    SHRINK-FIT TOOL HOLDER & ADAPTER: NCAT40 FLANGE SHANK (MOQ=1, PKG QTY=1)
    £457.14 Price with VAT: £548.56 Buy Surplus As Low As £274.88 Price with VAT: £329.86
    £274.88 Price with VAT: £329.86
    LYNDEX CORP NCAT40-SF0500-3.15CP

    LYNDEX CORP

    NCAT40-SF0500-3.15CP

    SHRINK-FIT TOOL HOLDER & ADAPTER: NCAT40 FLANGE SHANK (MOQ=1, PKG QTY=1)
    £382.44 Price with VAT: £458.93 Buy Surplus As Low As £230.06 Price with VAT: £276.07
    £230.06 Price with VAT: £276.07
    Next
    1 2 3