Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
KERT
KSTA3000S-24
INVERTER, DC-AC, 230VAC, 3000W, 50HZ, PURE SINE WAVE, SCREW / PLUG-IN, IP20, 62DBA, WITH INTEGRATED CHARGER
£497.36
Price with VAT:
£596.83
KENNAMETAL
HERTEL
300-001503
#1 60° 1/8" BODY DIAM SOLID CARBIDE COMBO DRILL & COUNTERSINK TIN FINISH, 1-1/2" OAL, DOUBLE END, RH CUT, PLAIN EDGE, 3/64" DRILL POINT DIAM, 3/64" DRILL POINT LENGTH
✓ IN STOCK!
£14.82
Price with VAT:
£17.78
KENNAMETAL
HERTEL
MCLNR124B
INDEXABLE TURNING TOOLHOLDER, 3/4IN X 3/4IN SHANK, SCREW CLAMP, RIGHT HAND,
✓ IN STOCK!
£89.64
Price with VAT:
£107.57
KENNAMETAL
HERTEL
218.3125
EXTRA LENGTH DRILL BIT: 5/16" DIA, 118 ° POINT, HIGH SPEED STEEL, (MOQ=1, PKG QTY=1)218.3125
£54.58
Price with VAT:
£65.49
KENNAMETAL
HERTEL
008019AS
#1-64 BOTTOMING RH 2B H2 BRIGHT HIGH SPEED STEEL 2-FLUTE STRAIGHT FLUTE HAND TAP (MOQ=1, PKG QTY=1)008019AS
£11.37
Price with VAT:
£13.64
KENNAMETAL
HERTEL
015313AS
8-32 UNC, 4 FLUTE PLUG HAND PULLEY TAP (MOQ=1, PKG QTY=1)015313AS
£60.64
Price with VAT:
£72.77
ASEA BROWN BOVERI
KENT TAYLOR
6202NZ10000B
CONTROLLER CARDFILE SC W/RACK
£11,370.11
Price with VAT:
£13,644.13
KENNAMETAL
HERTEL
1-312-1006
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 4 ; MOUNT: A2-6 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.5590 ; BODY MATERIAL: CAST IRON (SEMI-STEEL) ...
£938.41
Price with VAT:
£1,126.10
KENNAMETAL
HERTEL
1-221-0804
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 3 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: CAST IRON (SEMI-STEE ...
£905.82
Price with VAT:
£1,086.98
KENNAMETAL
HERTEL
1-221-0604
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 6 ; NUMBER OF JAWS: 3 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.1635 ; BODY MATERIAL: CAST IRON (SEMI-STEE ...
£570.78
Price with VAT:
£684.94
KENNAMETAL
HERTEL
1-201-1001
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 3 ; MOUNT: FRONT MOUNT PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.9921 ; BODY MATERIAL: C ...
£461.63
Price with VAT:
£553.95
KENNAMETAL
HERTEL
008020AS
#1-72 TAPER RH 2B H2 BRIGHT HIGH SPEED STEEL 2-FLUTE STRAIGHT FLUTE HAND TAP (MOQ=1, PKG QTY=1)008020AS
£20.47
Price with VAT:
£24.56
KENNAMETAL
HERTEL
CH-12050-U
MANUAL HOLD-DOWN TOGGLE CLAMP, VERTICAL, 200 LB CAPACITY, U-BAR, FLANGED BASE 60 ° HANDLE MOVEMENT, 100 ° BAR OPENING, STEELCH-12050-U
£9.10
Price with VAT:
£10.92
KENNAMETAL
HERTEL
CH-101-D
MANUAL HOLD-DOWN TOGGLE CLAMP, VERTICAL, 397 LB CAPACITY, U-BAR, FLANGED BASE 60 ° HANDLE MOVEMENT, 100 ° BAR OPENING, STEELCH-101-D
£13.64
Price with VAT:
£16.37
KENNAMETAL
HERTEL
CH-SA-14134
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: FLAT TIP ; FOR SPINDLE DIAMETER (INCH): 1/4 ; THREAD SIZE: 1/4-20 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (INCH): 1- ...
£1.06
Price with VAT:
£1.28
KENNAMETAL
HERTEL
CH-SA-08034-T1
CLAMP SPINDLE ASSEMBLIES; APPLICATION: TOGGLE CLAMPS ; SPINDLE MATERIAL: NYLON ; THREAD SIZE: #5-32 ; THREAD LENGTH (MM): 0.7500 ; TIP TYPE: HEX ; TIP SURFACE DIAMETER (DECIMAL INCH): 0.1563 ...
£0.51
Price with VAT:
£0.62
KENNAMETAL
HERTEL
CH-431
PULL-ACTION LATCH CLAMP, HORIZONTAL, 700 LB, U-HOOK, FLANGED BASE 1.75" DRAWING MOVEMENT, 4.961" OAL, STRAIGHT HANDLE, STEELCH-431
£15.31
Price with VAT:
£18.37
KENNAMETAL
HERTEL
CH-36204
STANDARD STRAIGHT LINE ACTION CLAMP, 300 LB LOAD CAPACITY, 1.5354" PLUNGER TRAVEL, STEEL 0.429" PLUNGER DIA, STRAIGHT HANDLECH-36204
£15.16
Price with VAT:
£18.19
KENNAMETAL
HERTEL
CH-36202-05
CLAMP NUTS; THREAD SIZE: 5/8-18 ; PRODUCT COMPATIBILITY: TOGGLE CLAMPS ; UNSPSC CODE: 27112100 (MOQ=1, PKG QTY=1)CH-36202-05
£1.54
Price with VAT:
£1.85
KENNAMETAL
HERTEL
CH-SA-56212
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: FLAT TIP ; FOR SPINDLE DIAMETER (INCH): 5/16 ; THREAD SIZE: 5/16-18 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (INCH): ...
£1.09
Price with VAT:
£1.31
KENNAMETAL
HERTEL
CH-30607
STANDARD STRAIGHT LINE ACTION CLAMP, 700 LB LOAD CAPACITY, 1.626" PLUNGER TRAVEL, FLANGED BASE, STEEL 6 MOUNTING HOLE, 0.28" HOLE, 0.5" PLUNGER DIA, STRAIGHT HANDLECH-30607
£20.47
Price with VAT:
£24.56
KENNAMETAL
HERTEL
CH-301-A
STANDARD STRAIGHT LINE ACTION CLAMP, 100 LB LOAD CAPACITY, 0.6575" PLUNGER TRAVEL, FLANGED BASE, STEEL 3 MOUNTING HOLE, 0.172" HOLE, 0.252" PLUNGER DIA, STRAIGHT HANDLECH-301-A
£10.61
Price with VAT:
£12.73
KENNAMETAL
HERTEL
CH-22502-B
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 551 LB CAPACITY, U-BAR, FLANGED BASE 76 ° HANDLE MOVEMENT, 94 ° BAR OPENING, STEELCH-22502-B
£14.40
Price with VAT:
£17.28
KENNAMETAL
HERTEL
CH-201-B
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 198 LB CAPACITY, U-BAR, FLANGED BASE 60 ° HANDLE MOVEMENT, 85 ° BAR OPENING, STEELCH-201-B
£10.61
Price with VAT:
£12.73
KENNAMETAL
HERTEL
CH-FW-141
CARBON STEEL, FLANGED WASHER FOR M6 DIAM CLAMP SPINDLE (MOQ=1, PKG QTY=1)CH-FW-141
£7.28
Price with VAT:
£8.73
KENNAMETAL
HERTEL
CH-FC-086312
CLAMP SPINDLE RETAINERS & FLANGED WASHERS, TYPE, CAP, TYPE, CAP, FOR SPINDLE DIAMETER (MM), M8, FOR SPINDLE DIAMETER (MM - 0 DECIMALS), M8, THREAD SIZE, M8 X 1.25, THREAD SIZE, M8 X 1.25, MA ...
£1.03
Price with VAT:
£1.23
KENNAMETAL
HERTEL
CH-36092
STANDARD STRAIGHT LINE ACTION CLAMP, 397 LB LOAD CAPACITY, 1.2598" PLUNGER TRAVEL, FLANGED BASE, STEEL 4 MOUNTING HOLE, 0.203" HOLE, 0.5" PLUNGER DIA, STRAIGHT HANDLECH-36092
£15.92
Price with VAT:
£19.10
KENNAMETAL
HERTEL
CH-36003
STANDARD STRAIGHT LINE ACTION CLAMP, 600 LB LOAD CAPACITY, 1.252" PLUNGER TRAVEL, FLANGED BASE, STEEL 4 MOUNTING HOLE, 0.22" HOLE, 0.433" PLUNGER DIA, STRAIGHT HANDLECH-36003
£15.92
Price with VAT:
£19.10
KENNAMETAL
HERTEL
CH-225-D
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 500 LB CAPACITY, U-BAR, FLANGED BASE 65 ° HANDLE MOVEMENT, 90 ° BAR OPENING, STEELCH-225-D
£11.37
Price with VAT:
£13.64
KENNAMETAL
HERTEL
CH-20235
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 750 LB CAPACITY, U-BAR, FLANGED BASE 55 ° HANDLE MOVEMENT, 85 ° BAR OPENING, STEELCH-20235
£19.71
Price with VAT:
£23.65
KENNAMETAL
HERTEL
8000178
1/2" INSCRIBED CIRCLE, DIAMOND (SHAPE) EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, IVSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£24.26
Price with VAT:
£29.11
KENNAMETAL
HERTEL
8000176
5/8" INSCRIBED CIRCLE, TRIANGLE EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, ITSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT8000176
£18.95
Price with VAT:
£22.74
KENNAMETAL
HERTEL
8000175
1/2" INSCRIBED CIRCLE, TRIANGLE EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, ITSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£15.92
Price with VAT:
£19.10
KENNAMETAL
HERTEL
8000174
1/4" INSCRIBED CIRCLE, TRIANGLE EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, SM SHIM STYLE, POSITIVE RAKE, NEUTRAL CUT8000174
£10.61
Price with VAT:
£12.73
KENNAMETAL
HERTEL
8000185
3/8" INSCRIBED CIRCLE, DIAMOND (SHAPE) EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, SKVN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£16.68
Price with VAT:
£20.01
KENNAMETAL
HERTEL
8000182
3/8" INSCRIBED CIRCLE, DIAMOND (SHAPE) EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, SKDP SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£16.68
Price with VAT:
£20.01
KENNAMETAL
HERTEL
8000171
3/4" INSCRIBED CIRCLE, SQUARE EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, ISSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£18.19
Price with VAT:
£21.83
KENNAMETAL
HERTEL
8000166
1/2" INSCRIBED CIRCLE, ROUND EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, IRSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£15.92
Price with VAT:
£19.10
KENNAMETAL
HERTEL
8000164
1/2" INSCRIBED CIRCLE, DIAMOND (SHAPE) EXTERNAL TURNING SHIM FOR INDEXABLES 1/4" THICK, IDSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£15.16
Price with VAT:
£18.19
KENNAMETAL
HERTEL
8000162
1/2" INSCRIBED CIRCLE, DIAMOND (SHAPE) EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, ICSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£15.16
Price with VAT:
£18.19
KENNAMETAL
HERTEL
8000189
3/8" INSCRIBED CIRCLE, ROUND EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, SM SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT8000189
£11.37
Price with VAT:
£13.64
KENNAMETAL
HERTEL
8000188
3/8" INSCRIBED CIRCLE, ROUND EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, SM SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£10.61
Price with VAT:
£12.73
KENNAMETAL
HERTEL
8000187
1/2" INSCRIBED CIRCLE, ROUND EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, SM SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT8000187
£13.64
Price with VAT:
£16.37