Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
KERT
KVIK150
DISCONTINUED BY MANUFACTURER, SWITCHING BATTERY CHARGER, 13.8VDC, 1.5A, 230 VAC, 50/60 HZ, NATURAL AIR COOLING, IP20, -10-+40C
£245.59
Price with VAT:
£294.71
KERT
KTREK500P
DISCONTINUED BY MANUFACTURER, SINGLE-PHASE VOLTAGE STABILIZER, 180-270VAC, 500VA
£200.11
Price with VAT:
£240.14
KERT
KVIK2406
DISCONTINUED BY MANUFACTURER, BATTERY CHARGER SWITCHING O=27.4VDC 6A
£66.70
Price with VAT:
£80.05
KERT
KVIK50/6
DISCONTINUED BY MANUFACTURER, BATTERY CHARGER LINEAR O=7.2VDC 0.5A
£16.68
Price with VAT:
£20.01
KENNAMETAL
HERTEL
CTCONO8-3J
CTCO N TOOLHOLDER, STYLE C, 0 END CUTTING EDGE ANGLE, FOR 11 POSITIVE TRIANGLE
£44.72
Price with VAT:
£53.67
KENNAMETAL
HERTEL
333-008560
COUNTERSINK: 3/4" HEAD DIA, 82 ° INCLUDED ANGLE, 3 FLUTES, CARBIDE, RIGHT HAND CUT (MOQ=1, PKG QTY=1)333-008560
£45.48
Price with VAT:
£54.58
ASEA BROWN BOVERI
KENT TAYLOR
6202NZ10000B
CONTROLLER CARDFILE SC W/RACK
£11,370.11
Price with VAT:
£13,644.13
KENNAMETAL
HERTEL
H-81154040000
COMBO DRILL & COUNTERSINK: #4, 5/16" BODY DIAM, BRIGHT FINISH, HIGH SPEED STEEL, 2-1/8" OAL, DOUBLE END, PLAIN EDGE, 1/8" DRILL POINT DIAM, 1/8" DRILL POINT LENGTHH-81154040000
£8.34
Price with VAT:
£10.01
KENNAMETAL
HERTEL
CH-SA-56212
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: FLAT TIP ; FOR SPINDLE DIAMETER (INCH): 5/16 ; THREAD SIZE: 5/16-18 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (INCH): ...
£1.09
Price with VAT:
£1.31
KENNAMETAL
HERTEL
CH-SA-38300
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: FLAT TIP ; FOR SPINDLE DIAMETER (INCH): 3/8 ; THREAD SIZE: 3/8-16 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (INCH): 3 ...
£5.00
Price with VAT:
£6.00
KENNAMETAL
HERTEL
CH-SA-14134
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: FLAT TIP ; FOR SPINDLE DIAMETER (INCH): 1/4 ; THREAD SIZE: 1/4-20 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (INCH): 1- ...
£1.06
Price with VAT:
£1.28
KENNAMETAL
HERTEL
CH-FC-053508 PB
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: CAP; TYPE: CAP; FOR SPINDLE DIAMETER (MM): M5; FOR SPINDLE DIAMETER (MM - 0 DECIMALS): M5; THREAD SIZE: M5 X 0.8; THREAD SIZE: M5 X 0.8; MATE ...
£4.03
Price with VAT:
£4.84
KENNAMETAL
HERTEL
CH-FC-108515 PB
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: CAP ; FOR SPINDLE DIAMETER (MM - 0 DECIMALS): M10 ; THREAD SIZE: M10X1.5 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (MM ...
£2.98
Price with VAT:
£3.58
KENNAMETAL
HERTEL
CH-FW-120
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; OVERALL WIDTH (DECIMAL INCH - 4 DECIMALS): 0.9720 ; MATERIAL: CARBON STEEL ; HOLE DIAMETER: 0.5100 ; FINISH COATING: ZINC ; UNSPSC CODE: 31161800 ( ...
£9.10
Price with VAT:
£10.92
KENNAMETAL
HERTEL
CH-FW-380
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; OVERALL WIDTH (DECIMAL INCH - 4 DECIMALS): 0.7500 ; MATERIAL: CARBON STEEL ; HOLE DIAMETER: 0.4000 ; FINISH COATING: ZINC ; UNSPSC CODE: 31161800 ( ...
£0.32
Price with VAT:
£0.38
KENNAMETAL
HERTEL
CH-FW-080
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; OVERALL WIDTH (DECIMAL INCH - 4 DECIMALS): 0.3260 ; MATERIAL: CARBON STEEL ; HOLE DIAMETER: 0.1690 ; FINISH COATING: ZINC ; UNSPSC CODE: 31161800 ( ...
£0.44
Price with VAT:
£0.53
KENNAMETAL
HERTEL
CH-FW-516
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; MATERIAL: CARBON STEEL ; MATERIAL: CARBON STEEL ; HOLE DIAMETER (DECIMAL INCH): 0.3220 ; HOLE DIAMETER (MM): 0.3220 ; HOLE DIAMETER: 0.3220 ; FINIS ...
£0.25
Price with VAT:
£0.30
KENNAMETAL
HERTEL
CH-FW-100
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; MATERIAL: CARBON STEEL ; MATERIAL: CARBON STEEL ; HOLE DIAMETER (DECIMAL INCH): 0.1650 ; HOLE DIAMETER (MM): 0.1650 ; HOLE DIAMETER: 0.1650 ; FINIS ...
£0.29
Price with VAT:
£0.35
KENNAMETAL
HERTEL
CH-FC-086312
CLAMP SPINDLE RETAINERS & FLANGED WASHERS, TYPE, CAP, TYPE, CAP, FOR SPINDLE DIAMETER (MM), M8, FOR SPINDLE DIAMETER (MM - 0 DECIMALS), M8, THREAD SIZE, M8 X 1.25, THREAD SIZE, M8 X 1.25, MA ...
£1.03
Price with VAT:
£1.23
KENNAMETAL
HERTEL
CH-FC-064410
CLAMP SPINDLE RETAINERS & FLANGED WASHERS, TYPE, CAP, TYPE, CAP, FOR SPINDLE DIAMETER (MM), M6, FOR SPINDLE DIAMETER (MM - 0 DECIMALS), M6, THREAD SIZE, M6 X 1.0, THREAD SIZE, M6 X 1.0, MATE ...
£3.52
Price with VAT:
£4.23
KENNAMETAL
HERTEL
CH-FC-121017
CLAMP SPINDLE RETAINERS & FLANGED WASHERS, TYPE, CAP, TYPE, CAP, FOR SPINDLE DIAMETER (MM), M12, FOR SPINDLE DIAMETER (MM - 0 DECIMALS), M12, THREAD SIZE, M12X1.75, THREAD SIZE, M12X1.75, MA ...
£2.12
Price with VAT:
£2.54
KENNAMETAL
HERTEL
CH-SA-08034-T2
CLAMP SPINDLE ASSEMBLIES; APPLICATION: TOGGLE CLAMPS ; SPINDLE MATERIAL: NYLON ; THREAD SIZE: #5-32 ; THREAD LENGTH (MM): 0.7500 ; TIP TYPE: HEX ; TIP SURFACE DIAMETER (DECIMAL INCH): 0.1563 ...
£0.49
Price with VAT:
£0.58
KENNAMETAL
HERTEL
CH-SA-08034-T1
CLAMP SPINDLE ASSEMBLIES; APPLICATION: TOGGLE CLAMPS ; SPINDLE MATERIAL: NYLON ; THREAD SIZE: #5-32 ; THREAD LENGTH (MM): 0.7500 ; TIP TYPE: HEX ; TIP SURFACE DIAMETER (DECIMAL INCH): 0.1563 ...
£0.51
Price with VAT:
£0.62
KENNAMETAL
HERTEL
CH-36202-05
CLAMP NUTS; THREAD SIZE: 5/8-18 ; PRODUCT COMPATIBILITY: TOGGLE CLAMPS ; UNSPSC CODE: 27112100 (MOQ=1, PKG QTY=1)CH-36202-05
£1.54
Price with VAT:
£1.85
KENNAMETAL
HERTEL
CH-36204-05
CLAMP NUTS; THREAD SIZE: 3/4-16 ; PRODUCT COMPATIBILITY: TOGGLE CLAMPS (MOQ=1, PKG QTY=1)CH-36204-05
£1.69
Price with VAT:
£2.03
KENNAMETAL
HERTEL
CH-36224-05
CLAMP NUTS; THREAD SIZE: 1-14 ; PRODUCT COMPATIBILITY: TOGGLE CLAMPS ; UNSPSC CODE: 27112100 (MOQ=1, PKG QTY=1)CH-36224-05
£2.01
Price with VAT:
£2.41
KENNAMETAL
HERTEL
MR34-0433.406
CHUCKING REAMER, 1 - 2 MM DIAMETER RANGE, 1.1 MM DIAMETER, SOLID CARBIDE, SPIRAL FLUTE, LEFT HAND SPIRAL, BRIGHT/UNCOATED, STRAIGHT-CLYINDRICAL SHANK, NO DOWELL PIN REAMER, 50 MM LENGTH, 4 F ...
£53.06
Price with VAT:
£63.67
KENNAMETAL
HERTEL
CH-FW-141
CARBON STEEL, FLANGED WASHER FOR M6 DIAM CLAMP SPINDLE (MOQ=1, PKG QTY=1)CH-FW-141
£7.28
Price with VAT:
£8.73
KENNAMETAL
HERTEL
H59868372
BORING BAR, 0.208" MIN BORE, 1-7/8" MAX DEPTH, RIGHT HAND HBBC INDEXABLE 6" OAL, 3/16" SHANK DIAM, USES CD.., HBBC INSERTS, THROUGH COOLANT
£190.26
Price with VAT:
£228.31
KENNAMETAL
HERTEL
912.5
AIRCRAFT EXTENSION DRILL BIT: 1/2" DIA, 135 ° POINT, HIGH SPEED STEEL912.5
£10.61
Price with VAT:
£12.73
KENNAMETAL
HERTEL
906.5
AIRCRAFT EXTENSION DRILL BIT: 1/2" DIA, 135 ° POINT, HIGH SPEED STEEL906.5
£4.41
Price with VAT:
£5.29
KENNAMETAL
HERTEL
SZ0034B
ABRASIVE BUR: SD-9, BALL (MOQ=1, PKG QTY=1)SZ0034B
£50.03
Price with VAT:
£60.03
KENNAMETAL
HERTEL
015313AS
8-32 UNC, 4 FLUTE PLUG HAND PULLEY TAP (MOQ=1, PKG QTY=1)015313AS
£60.64
Price with VAT:
£72.77
KENNAMETAL
HERTEL
008572AS
5/8-18 PLUG RH H2 BRIGHT HIGH SPEED STEEL 4-FLUTE STRAIGHT FLUTE HAND TAP (MOQ=1, PKG QTY=1)008572AS
£28.80
Price with VAT:
£34.57