SEARCH NOW FOR ALL YOUR ACCUPRO SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
ACCUPRO
586315
DOUBLE ANGLE COLLET: DA200 COLLET, 3/16" 1.193" OAL (MOQ=1, PKG QTY=1)
✓ IN STOCK!
£11.35
Price with VAT:
£13.62
ACCUPRO
12176971
SQUARE END MILL, 1/8 INCH, 1/2 INCH LOC, 1/8 INCH SHANK DIAM, 1-1/2 INCH OAL, 4 FLUTE, SOLID CARBIDE,SINGLE END, ALTIN FINISH, SPIRAL FLUTE, 40° HELIX, CENTERCUTTING, RIGHT HAND CUT, LEFT HA ...
£10.38
Price with VAT:
£12.46
ACCUPRO
586335
DOUBLE ANGLE COLLET: DA100 COLLET, 1/8" 1.441" OAL (MOQ=1, PKG QTY=1)
✓ IN STOCK!
£12.68
Price with VAT:
£15.22
ACCUPRO
586329
DOUBLE ANGLE COLLET: DA100 COLLET, 3/32" 1.441" OAL (MOQ=1, PKG QTY=1)
✓ IN STOCK!
£10.68
Price with VAT:
£12.81
ACCUPRO
ASS061200
5/32 INCH PILOT DIAMETER, DRILL CHUCK KEY NO. CK3 FOR USE WITH 1/4 INCH ACCUPRO STAINLESS STEEL DRILL CHUCKS
£11.87
Price with VAT:
£14.24
ACCUPRO
CL0060900
3/8-24, 1/32 TO 1/4 INCH CAPACITY, THREADED MOUNT STEEL DRILL CHUCK KEYED, 30MM SLEEVE DIAM, 44MM OPEN LENGTH
£13.35
Price with VAT:
£16.02
ACCUPRO
ECIL12600
1/2 INCH SHANK DIAMETER, JT6 MOUNT TAPER, DRILL CHUCK ARBOR JACOBS TAPER MOUNT
£14.09
Price with VAT:
£16.91
ACCUPRO
ECIL12100
1/2 INCH SHANK DIAMETER, JT1 MOUNT TAPER, DRILL CHUCK ARBOR JACOBS TAPER MOUNT
£14.09
Price with VAT:
£16.91
ACCUPRO
ECIL38000
3/8 INCH SHANK DIAMETER, JT0 MOUNT TAPER, DRILL CHUCK ARBOR JACOBS TAPER MOUNT
£14.09
Price with VAT:
£16.91
ACCUPRO
ECIL12200
1/2 INCH SHANK DIAMETER, JT2 MOUNT TAPER, DRILL CHUCK ARBOR JACOBS TAPER MOUNT
£14.09
Price with VAT:
£16.91
ACCUPRO
ECIL38100
3/8 INCH SHANK DIAMETER, JT1 MOUNT TAPER, DRILL CHUCK ARBOR JACOBS TAPER MOUNT
£14.09
Price with VAT:
£16.91
ACCUPRO
14556468
BALL END MILL, BALL END MILLS, MILL DIAMETER (MM): 0.1563IN , MILL DIAMETER (INCH): 5/32 , MILL DIAMETER (DECIMAL INCH): 0.1563, 0.1563IN , MILL DIAMETER: 0.1563IN , NUMBER OF FLUTES: 4 , LE ...
£14.09
Price with VAT:
£16.91
ACCUPRO
14556472
BALL END MILL, BALL END MILLS, MILL DIAMETER (MM): 0.25IN , MILL DIAMETER (INCH): 1/4 , MILL DIAMETER (DECIMAL INCH): 0.2500, 0.25IN , MILL DIAMETER: 0.25IN , NUMBER OF FLUTES: 4 , LENGTH OF ...
£14.83
Price with VAT:
£17.80
ACCUPRO
6503225
SQUARE END MILL, 1/8 INCH, 1/2 INCH LOC, 1/8 INCH SHANK DIAM, 2 INCH OAL, 4 FLUTE, SOLID CARBIDE,SINGLE END, ALTICRN FINISH, SPIRAL FLUTE, 38° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAN ...
£14.83
Price with VAT:
£17.80
ACCUPRO
ECIL58600
5/8 INCH SHANK DIAMETER, JT6 MOUNT TAPER, DRILL CHUCK ARBOR JACOBS TAPER MOUNT
£15.57
Price with VAT:
£18.69
ACCUPRO
ECIL58330
5/8 INCH SHANK DIAMETER, JT33 MOUNT TAPER, DRILL CHUCK ARBOR JACOBS TAPER MOUNT
£15.57
Price with VAT:
£18.69
ACCUPRO
ECIL58100
5/8 INCH SHANK DIAMETER, JT1 MOUNT TAPER, DRILL CHUCK ARBOR JACOBS TAPER MOUNT
£15.57
Price with VAT:
£18.69
ACCUPRO
EJ0160000
1MT SHANK, JT6 MOUNT TAPER, DRILL CHUCK ARBOR MORSE TAPER SHANK, JACOBS TAPER MOUNT
£15.57
Price with VAT:
£18.69
ACCUPRO
EJ0210000
2MT SHANK, JT1 MOUNT TAPER, DRILL CHUCK ARBOR MORSE TAPER SHANK, JACOBS TAPER MOUNT
£15.57
Price with VAT:
£18.69
ACCUPRO
EJ1330000
1MT SHANK, JT33 MOUNT TAPER, DRILL CHUCK ARBOR MORSE TAPER SHANK, JACOBS TAPER MOUNT
£15.57
Price with VAT:
£18.69
ACCUPRO
ECIL58200
5/8 INCH SHANK DIAMETER, JT2 MOUNT TAPER, DRILL CHUCK ARBOR JACOBS TAPER MOUNT
£15.57
Price with VAT:
£18.69
ACCUPRO
CL0100900
3/8-24, 1/32 TO 3/8 INCH CAPACITY, THREADED MOUNT STEEL DRILL CHUCK KEYED, 33MM SLEEVE DIAM, 50MM OPEN LENGTH
£15.57
Price with VAT:
£18.69
ACCUPRO
EJ0220000
2MT SHANK, JT2 MOUNT TAPER, DRILL CHUCK ARBOR MORSE TAPER SHANK, JACOBS TAPER MOUNT
£15.57
Price with VAT:
£18.69
ACCUPRO
EJ0110000
1MT SHANK, JT1 MOUNT TAPER, DRILL CHUCK ARBOR MORSE TAPER SHANK, JACOBS TAPER MOUNT
£17.06
Price with VAT:
£20.47
ACCUPRO
EJ0230000
2MT SHANK, JT3 MOUNT TAPER, DRILL CHUCK ARBOR MORSE TAPER SHANK, JACOBS TAPER MOUNT
£17.06
Price with VAT:
£20.47
ACCUPRO
EJ0120000
1MT SHANK, JT2 MOUNT TAPER, DRILL CHUCK ARBOR MORSE TAPER SHANK, JACOBS TAPER MOUNT
£17.06
Price with VAT:
£20.47
ACCUPRO
EJ0260000
2MT SHANK, JT6 MOUNT TAPER, DRILL CHUCK ARBOR MORSE TAPER SHANK, JACOBS TAPER MOUNT
£17.06
Price with VAT:
£20.47
ACCUPRO
ECIL34300
3/4 INCH SHANK DIAMETER, JT3 MOUNT TAPER, DRILL CHUCK ARBOR JACOBS TAPER MOUNT
£17.80
Price with VAT:
£21.36
ACCUPRO
ECIL34400
3/4 INCH SHANK DIAMETER, JT4 MOUNT TAPER, DRILL CHUCK ARBOR JACOBS TAPER MOUNT
£17.80
Price with VAT:
£21.36
ACCUPRO
14556391
SQUARE END MILL,1/4'' DIA, 1'' LOC, 1/4'' SHANK DIA, 4'' OAL, 4 FLUTES, SOLID CARBIDE SINGLE END, ALTIN+ FINISH, SPIRAL FLUTE, 40 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE, SERIES 6/44
£17.80
Price with VAT:
£21.36
ACCUPRO
EJ0330000
3MT SHANK, JT3 MOUNT TAPER, DRILL CHUCK ARBOR MORSE TAPER SHANK, JACOBS TAPER MOUNT
£18.54
Price with VAT:
£22.25
ACCUPRO
14556006
1/16 INCH DIAM 4 FLUTE SOLID CARBIDE 0.015 INCH CORNER RADIUS END MILL ALTIN+ FINISH, 1-1/2 INCH OAL, 3/16 INCH LOC, 1/8 INCH SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
£18.54
Price with VAT:
£22.25
ACCUPRO
EJ3330000
3MT SHANK, JT33 MOUNT TAPER, DRILL CHUCK ARBOR MORSE TAPER SHANK, JACOBS TAPER MOUNT
£19.28
Price with VAT:
£23.14
ACCUPRO
EJ0320000
3MT SHANK, JT2 MOUNT TAPER, DRILL CHUCK ARBOR MORSE TAPER SHANK, JACOBS TAPER MOUNT
£19.28
Price with VAT:
£23.14
ACCUPRO
EJ0360000
3MT SHANK, JT6 MOUNT TAPER, DRILL CHUCK ARBOR MORSE TAPER SHANK, JACOBS TAPER MOUNT
£19.28
Price with VAT:
£23.14
ACCUPRO
88.510.40.AP
STYLE A CAT40 5/8-11 45° 0.74 INCH DIAM HIGH TORQUE RETENTION KNOB 0.64 INCH KNOB TO FLANGE, 0.44 INCH FLANGE THICKNESS, 0.49 INCH NECK DIAM, 1.6243 INCH OAL, THROUGH COOLANT, 0.2362 INCH CO ...
£20.02
Price with VAT:
£24.03
ACCUPRO
CL0131000
1/2-20, 3/64 TO 1/2 INCH CAPACITY, THREADED MOUNT STEEL DRILL CHUCK KEYED, 43MM SLEEVE DIAM, 59MM OPEN LENGTH
£20.02
Price with VAT:
£24.03
ACCUPRO
CL0130900
3/8-24, 3/64 TO 1/2 INCH CAPACITY, THREADED MOUNT STEEL DRILL CHUCK KEYED, 43MM SLEEVE DIAM, 59MM OPEN LENGTH
£20.02
Price with VAT:
£24.03
ACCUPRO
88.600.30.AP
STYLE C BT30 M12X1.75 45° 0.4331 INCH DIAM HIGH TORQUE RETENTION KNOB 0.9055 INCH KNOB TO FLANGE, 0.7087 INCH FLANGE THICKNESS, 0.2756 INCH NECK DIAM, 0.4921 INCH PILOT DIAM, 1.693 INCH OAL, ...
£20.02
Price with VAT:
£24.03
ACCUPRO
6502735
BALL END MILL, 3/16 INCH DIAM, 9/16 INCH LOC, 4 FLUTE SOLID CARBIDE, ALTICRN FINISH, SINGLE END, 2-1/2 INCH OAL, 3/16 INCH SHANK DIAM, SERIES HS
£20.02
Price with VAT:
£24.03
ACCUPRO
ECIL01330
1 INCH SHANK DIAMETER, JT33 MOUNT TAPER, DRILL CHUCK ARBOR JACOBS TAPER MOUNT
£20.76
Price with VAT:
£24.92
ACCUPRO
ECIL01600
1 INCH SHANK DIAMETER, JT6 MOUNT TAPER, DRILL CHUCK ARBOR JACOBS TAPER MOUNT
£20.76
Price with VAT:
£24.92
ACCUPRO
ECIL01300
1 INCH SHANK DIAMETER, JT3 MOUNT TAPER, DRILL CHUCK ARBOR JACOBS TAPER MOUNT
£20.76
Price with VAT:
£24.92
ACCUPRO
6502953
3/16 INCH DIAM 5 FLUTE SOLID CARBIDE 0.03 INCH CORNER RADIUS END MILL ALTICRN FINISH, 2-1/2 INCH OAL, 3/4 INCH LOC, 3/16 INCH SHANK DIAM, 38° HELIX, RH CUT, RH FLUTE, CENTERCUTTING, SERIES H ...
£20.76
Price with VAT:
£24.92
ACCUPRO
14556476
BALL END MILL, BALL END MILLS, MILL DIAMETER (MM): 0.3125IN , MILL DIAMETER (INCH): 5/16 , MILL DIAMETER (DECIMAL INCH): 0.3125, 0.3125IN , MILL DIAMETER: 0.3125IN , NUMBER OF FLUTES: 4 , LE ...
£21.51
Price with VAT:
£25.81
ACCUPRO
88.604.40.AP
STYLE C BT40 M16X2 60° 0.5906 INCH DIAM HIGH TORQUE RETENTION KNOB 1.3779 INCH KNOB TO FLANGE, 1.1024 INCH FLANGE THICKNESS, 0.3937 INCH NECK DIAM, 0.6693 INCH PILOT DIAM, 2.3622 INCH OAL
£21.51
Price with VAT:
£25.81
ACCUPRO
ACY135600
DRILL CHUCK JAW AND NUT UNIT FOR USE WITH 1/2 MEDIUM DUTY DRILL CHUCKS
£21.51
Price with VAT:
£25.81
ACCUPRO
ACX135600
DRILL CHUCK JAW AND NUT UNIT FOR USE WITH 1/2 HEAVY DUTY DRILL CHUCKS
£21.51
Price with VAT:
£25.81
